08:51:16.571 |
main |
DEBUG |
org.selfbus.updater.Updater |
<init> |
78 |
Selfbus-Updater 1.11
A Tool for updating firmware of a Selfbus device in a KNX network.
Selfbus |
08:51:16.573 |
main |
DEBUG |
org.selfbus.updater.Updater |
<init> |
79 |
Calimero 2.5.1 |
08:51:16.573 |
main |
INFO |
org.selfbus.updater.Updater |
<init> |
80 |
?[1;92m
_____ ________ __________ __ _______ __ ______ ____ ___ ________________
/ ___// ____/ / / ____/ __ )/ / / / ___/ / / / / __ \/ __ \/ |/_ __/ ____/ __ \
\__ \/ __/ / / / /_ / __ / / / /\__ \ / / / / /_/ / / / / /| | / / / __/ / /_/ /
___/ / /___/ /___/ __/ / /_/ / /_/ /___/ / / /_/ / ____/ /_/ / ___ |/ / / /___/ _, _/
/____/_____/_____/_/ /_____/\____//____/ \____/_/ /_____/_/ |_/_/ /_____/_/ |_|
by Dr. Stefan Haller, Oliver Stefan et al. Selfbus-Updater 1.11
?[0m |
08:51:16.606 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
364 |
cli: 192.168.1.12 --fileName .\\rauchmelder-bcu1_flashstart_0x3000_release_v1.03_libv2.02.hex --uid 35:00:04:0F:C8:10:65:AF:60:D4:FA:5D --device 1.1.98 --full |
08:51:16.608 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
379 |
logLevel=DEBUG |
08:51:16.608 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
390 |
priority=low |
08:51:16.608 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
407 |
NO_FLASH=false |
08:51:16.609 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
412 |
eraseFlash=false |
08:51:16.609 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
419 |
dumpFlashStartAddress=-1 |
08:51:16.609 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
420 |
dumpFlashEndAddress=-1 |
08:51:16.610 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
425 |
full=true |
08:51:16.610 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
430 |
routing=false |
08:51:16.610 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
435 |
nat=false |
08:51:16.611 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
440 |
fileName=.\\rauchmelder-bcu1_flashstart_0x3000_release_v1.03_libv2.02.hex |
08:51:16.612 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
449 |
localhost=null |
08:51:16.612 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
454 |
localport=0 |
08:51:16.613 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
459 |
port=3671 |
08:51:16.613 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
464 |
medium=tp1 |
08:51:16.613 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
473 |
delay=0 |
08:51:16.614 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
478 |
tl4Timeout=false |
08:51:16.616 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
483 |
uid=35:00:04:0F:C8:10:65:AF:60:D4:FA:5D |
08:51:16.617 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
489 |
appVersionPtr=0 |
08:51:16.617 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
496 |
device=1.1.98 |
08:51:16.617 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
502 |
progDevice=15.15.192 |
08:51:16.618 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
507 |
ownAddress=0.0.0 |
08:51:16.618 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
512 |
ft12= |
08:51:16.618 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
517 |
tpuart= |
08:51:16.619 |
main |
DEBUG |
org.selfbus.updater.Utils |
parseHost |
64 |
Resolved 192.168.1.12 with /192.168.1.12 |
08:51:16.619 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
527 |
knxInterface=/192.168.1.12 |
08:51:16.619 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
547 |
logStatistics=false |
08:51:16.620 |
main |
DEBUG |
org.selfbus.updater.Updater |
createLink |
145 |
Creating KNX network link TP1 medium, device 0.0.0... |
08:51:16.674 |
main |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
connect |
187 |
establish connection from 192.168.1.209:63370 to 192.168.1.12:3671 (udp) |
08:51:16.675 |
main |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
connect |
202 |
wait for connect response from 192.168.1.12:3671 ... |
08:51:16.691 |
main |
INFO |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
connect |
213 |
connection established (data endpoint 192.168.1.12:3671, channel 3, tunneling address 1.0.14) |
08:51:16.718 |
main |
DEBUG |
calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 |
connect |
187 |
establish connection from 192.168.1.209:63371 to 192.168.1.12:3671 (udp) |
08:51:16.719 |
main |
DEBUG |
calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 |
connect |
202 |
wait for connect response from 192.168.1.12:3671 ... |
08:51:16.724 |
main |
INFO |
calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 |
connect |
213 |
connection established (data endpoint 192.168.1.12:3671, channel 4) |
08:51:16.760 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
setMaxApduLength |
515 |
using max. APDU length of 220 |
08:51:16.766 |
main |
DEBUG |
calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 |
log |
157 |
close connection - user request |
08:51:16.769 |
main |
DEBUG |
org.selfbus.updater.DeviceManagement |
<init> |
50 |
Creating SBManagementClientImpl |
08:51:16.791 |
main |
INFO |
org.selfbus.updater.Updater |
run |
297 |
KNX connection: tunneling link 192.168.1.12:3671 TP1 medium, device 0.0.0, hopcount 6
|
08:51:16.797 |
main |
INFO |
org.selfbus.updater.Updater |
run |
299 |
Telegram priority: low |
08:51:16.799 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->0/0/0 L_Data.req, system priority hop count 6 repeat, tpdu 01 00 |
08:51:16.889 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->0/0/0 |
08:51:16.890 |
KNXnet/IP receiver |
WARN |
calimero.link.192.168.1.12:3671 |
frameReceived |
212 |
negative confirmation of 0/0/0: 2e 00 91 e0 10 0e 00 00 01 01 00 |
08:51:19.909 |
main |
DEBUG |
calimero.mgmt.TL 192.168.1.12:3671 |
detach |
430 |
detached from tunneling link 192.168.1.12:3671 TP1 medium, device 0.0.0, hopcount 6 |
08:51:19.910 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
restartDeviceToBootloader |
91 |
Restarting device 1.1.98 into bootloader mode using tunneling link 192.168.1.12:3671 TP1 medium, device 0.0.0, hopcount 6 |
08:51:19.926 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->1.1.98 L_Data.req, system priority hop count 6 repeat, tpdu 80 |
08:51:19.948 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->1.1.98 |
08:51:19.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 1.1.98 |
08:51:19.963 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->1.1.98 L_Data.req, low priority hop count 6 repeat, tpdu 43 81 07 ff |
08:51:19.990 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->1.1.98 |
08:51:19.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 1.1.98 |
08:51:20.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.98->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:20.014 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->1.1.98 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:51:20.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.98->1.0.14 L_Data.ind, low priority hop count 6, tpdu 43 a1 00 00 01 |
08:51:20.048 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.98->1.0.14 L_Data.ind, system priority hop count 6, tpdu 81 |
08:51:20.079 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->1.1.98 |
08:51:20.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 1.1.98 |
08:51:20.079 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->1.1.98 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:51:20.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->1.1.98 |
08:51:20.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 1.1.98 |
08:51:20.103 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->1.1.98 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:20.110 |
main |
DEBUG |
calimero.mgmt.TL 192.168.1.12:3671 |
detach |
430 |
detached from tunneling link 192.168.1.12:3671 TP1 medium, device 0.0.0, hopcount 6 |
08:51:20.110 |
main |
DEBUG |
calimero.mgmt.MC 192.168.1.12:3671 |
detach |
1230 |
detached from tunneling link 192.168.1.12:3671 TP1 medium, device 0.0.0, hopcount 6 |
08:51:20.126 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->1.1.98 |
08:51:20.126 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 1.1.98 |
08:51:20.110 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
restartDeviceToBootloader |
94 |
Device 1.1.98 reported ?[0;92m1 seconds?[0m for restarting |
08:51:21.136 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
restartDeviceToBootloader |
97 |
Device 1.1.98 should now have started into bootloader mode. |
08:51:21.138 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->0/0/0 L_Data.req, system priority hop count 6 repeat, tpdu 01 00 |
08:51:21.202 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->0/0/0 L_Data.ind, system priority hop count 6 repeat, tpdu 01 40 |
08:51:21.260 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->0/0/0 |
08:51:21.260 |
KNXnet/IP receiver |
WARN |
calimero.link.192.168.1.12:3671 |
frameReceived |
212 |
negative confirmation of 0/0/0: 2e 00 91 e0 10 0e 00 00 01 01 00 |
08:51:24.275 |
main |
DEBUG |
calimero.mgmt.TL 192.168.1.12:3671 |
detach |
430 |
detached from tunneling link 192.168.1.12:3671 TP1 medium, device 0.0.0, hopcount 6 |
08:51:24.275 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
unlockDeviceWithUID |
202 |
Unlocking device 15.15.192 with UID 35:00:04:0F:C8:10:65:AF:60:D4:FA:5D... |
08:51:24.305 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80 |
08:51:24.328 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:24.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:24.329 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 bf 35 00 04 0f c8 10 65 af 60 d4 fa 5d |
08:51:24.373 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:24.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:24.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:24.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:24.413 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:24.438 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:24.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:24.417 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
requestBootloaderIdentity |
137 |
Requesting Bootloader Identity... |
08:51:24.445 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 b8 01 0b |
08:51:24.473 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:24.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:24.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:24.525 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe b7 01 0b 00 01 02 02 00 2d 00 00 |
08:51:24.525 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:24.548 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:24.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:24.528 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
requestBootloaderIdentity |
160 |
Device Bootloader: ?[0;93mVersion: 1.11, sbLib Version: 2.02, Features: 0x0100, App-start: 0x2D00?[0m |
08:51:24.566 |
main |
INFO |
org.selfbus.updater.Updater |
run |
328 |
Requesting App Version String... |
08:51:24.585 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 bc |
08:51:24.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:24.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:24.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:24.665 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe bb 53 5f 52 4d 5f 48 36 20 31 2e 30 33 |
08:51:24.665 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:24.688 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:24.688 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:24.667 |
main |
INFO |
org.selfbus.updater.Updater |
run |
331 |
Current App Version String is: ?[0;92mS_RM_H6 1.03?[0m |
08:51:24.708 |
main |
INFO |
org.selfbus.updater.Updater |
run |
338 |
Loading file '.\\rauchmelder-bcu1_flashstart_0x3000_release_v1.03_libv2.02.hex'... |
08:51:24.756 |
main |
INFO |
org.selfbus.updater.Updater |
run |
340 |
Hex file parsed: start 0x3000, end 0x7593, length 17812, crc32 0x3FCC73FE |
08:51:25.438 |
main |
INFO |
org.selfbus.updater.Updater |
run |
364 |
File App Version String is : ?[0;92mS_RM_H6 1.03?[0m found at address 0x4523 |
08:51:25.449 |
main |
INFO |
org.selfbus.updater.Updater |
run |
379 |
?[0;93mInfo: There are 768 bytes of unused flash between bootloader and firmware.?[0m |
08:51:25.450 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
requestBootDescriptor |
176 |
Requesting Boot Descriptor... |
08:51:25.451 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ba |
08:51:25.476 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:25.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:25.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:25.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe b9 00 30 00 00 93 75 00 00 fe 73 cc 3f |
08:51:25.531 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:25.555 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:25.556 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:25.540 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
requestBootDescriptor |
186 |
Current firmware: valid: true, start: 0x3000, end: 0x7593, size: 0x4594, crc32: 0x3FCC73FE |
08:51:25.567 |
main |
INFO |
org.selfbus.updater.Updater |
run |
400 |
?[0;30m?[42mStarting to send new firmware now:?[0m |
08:51:25.569 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
eraseAddressRange |
216 |
Erasing firmware address range: 0x3000 - 0x7593... |
08:51:25.593 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 e9 00 30 00 00 93 75 00 00 |
08:51:25.630 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:25.631 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:26.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d2 |
08:51:26.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:26.389 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:26.412 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:26.412 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:26.398 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
41 |
Start sending application data (17812 bytes) with telegram delay of 0ms |
08:51:26.442 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 1,4% |
08:51:26.448 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 00 00 20 00 10 dd 30 00 00 d7 30 00 00 |
08:51:26.493 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:26.496 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:26.507 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:26.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:26.530 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:26.533 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:26.533 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 0c 9d 57 00 00 00 00 00 00 00 00 00 00 |
08:51:26.554 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:26.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:26.593 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:26.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:26.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:26.631 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:26.631 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:26.633 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:26.634 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 18 00 00 00 00 21 af ff ef 00 00 00 00 |
08:51:26.654 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:26.655 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:26.694 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:26.695 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:26.708 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:26.731 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:26.731 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:26.749 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:26.750 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 24 00 00 00 00 00 00 00 00 d9 30 00 00 |
08:51:26.759 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:26.759 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:26.796 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:26.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:26.810 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:26.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:26.834 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:26.847 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:26.848 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 30 00 00 00 00 00 00 00 00 db 30 00 00 |
08:51:26.862 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:26.862 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:26.905 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:26.905 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:26.916 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:26.939 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:26.939 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:26.963 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:26.963 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 3c 65 43 00 00 d5 30 00 00 d5 30 00 00 |
08:51:26.964 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:26.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.009 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:27.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:27.050 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:27.072 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.072 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.102 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:27.102 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 48 d5 30 00 00 d5 30 00 00 d5 30 00 00 |
08:51:27.147 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.147 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.161 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:27.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:27.185 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:27.207 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.227 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:27.227 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 54 d5 30 00 00 d5 30 00 00 d5 30 00 00 |
08:51:27.272 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:27.309 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:27.309 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:27.332 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.345 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:27.345 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 60 d5 30 00 00 d5 30 00 00 d5 30 00 00 |
08:51:27.391 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.391 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.404 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:27.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:27.429 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:27.452 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.479 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:27.480 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 6c d5 30 00 00 d5 30 00 00 d5 30 00 00 |
08:51:27.527 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.541 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:27.564 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:27.564 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:27.570 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:27.570 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 78 d5 30 00 00 d5 30 00 00 d5 30 00 00 |
08:51:27.587 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.627 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.641 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:27.665 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:27.664 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:27.687 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.688 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.697 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:27.698 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 84 a5 4e 00 00 4d 52 00 00 d5 30 00 00 |
08:51:27.743 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.744 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:27.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:27.783 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:27.804 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.805 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.817 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:27.817 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 90 d5 30 00 00 31 43 00 00 00 00 00 00 |
08:51:27.862 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.862 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:27.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:27.901 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:27.903 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:27.903 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 9c 00 00 00 00 d5 30 00 00 d5 30 00 00 |
08:51:27.928 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.928 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.966 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:27.966 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:27.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:28.003 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:28.003 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:28.027 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.028 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.059 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:28.060 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef a8 d5 30 00 00 00 00 00 00 d5 30 00 00 |
08:51:28.105 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.106 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:28.143 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:28.143 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:28.165 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.179 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:28.180 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef b4 d5 30 00 00 d5 30 00 00 d5 30 00 00 |
08:51:28.225 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.225 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:28.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:28.263 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:28.287 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.287 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.308 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:28.308 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef c0 1c 75 00 00 c0 00 00 10 78 00 00 00 |
08:51:28.353 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.353 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.367 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:28.390 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:28.390 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:28.409 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:28.409 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef cc 38 01 00 10 38 02 00 00 fe e7 fe e7 |
08:51:28.417 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.417 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.454 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.454 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:28.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:28.492 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:28.509 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:28.509 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef d8 fe e7 fe e7 f0 b5 de 4b de 49 85 b0 |
08:51:28.519 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.519 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.555 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.555 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.569 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:28.593 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:28.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:28.596 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:28.596 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef e4 8b 42 00 d2 ec e0 00 20 dc 49 8b 42 |
08:51:28.616 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.616 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.656 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:28.693 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:28.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:28.695 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:28.695 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef f0 00 d2 f5 e0 03 f0 78 fc 03 f0 56 fe |
08:51:28.716 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.755 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.770 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:28.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:28.793 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:28.816 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:28.817 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef fc fa 21 d9 4b |
08:51:28.818 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.850 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.865 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:28.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:28.889 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:28.891 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:28.912 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.913 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3000 with 256 bytes and CRC32 0x898BCECD |
08:51:28.913 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ee 00 01 00 30 00 00 cd ce 8b 89 |
08:51:28.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:28.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:28.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:28.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:28.992 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:28.994 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 2,9% |
08:51:28.996 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 00 89 00 18 68 01 93 03 f0 b3 fc 01 f0 |
08:51:29.014 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.055 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.055 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:29.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:29.092 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:29.098 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:29.101 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 0c d3 fe 00 23 d5 4f 4c 21 3b 62 d5 48 |
08:51:29.115 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.155 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:29.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:29.193 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:29.195 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:29.195 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 18 24 33 d5 4a 02 f0 fa fd 01 23 5b 42 |
08:51:29.214 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.254 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:29.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:29.292 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:29.297 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:29.297 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 24 3b 64 d3 4b d3 4c 5b 7e 00 2b 01 d0 |
08:51:29.317 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.317 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.360 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.361 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:29.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:29.394 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:29.405 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:29.405 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 30 01 f0 52 f9 d1 49 d2 48 01 f0 fa fe |
08:51:29.418 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.418 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.457 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.472 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:29.495 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:29.495 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:29.497 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:29.498 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 3c 23 00 ff 33 5b 7e 00 2b 01 d0 01 f0 |
08:51:29.520 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.521 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.557 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.558 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:29.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:29.595 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:29.612 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:29.612 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 48 47 f9 ce 49 ce 48 01 f0 ef fe 23 00 |
08:51:29.621 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.658 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.659 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.673 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:29.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:29.697 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:29.719 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.759 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:29.760 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 54 ff 33 5b 7e 00 2b 01 d0 01 f0 3c f9 |
08:51:29.805 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.805 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:29.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:29.842 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:29.865 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.865 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.880 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:29.881 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 60 bf f3 4f 8f bf f3 6f 8f 80 22 c8 4b |
08:51:29.930 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.930 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.940 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:29.963 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:29.963 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:29.985 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:29.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:29.996 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:29.996 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 6c 92 03 da 67 80 23 c7 4a 5b 01 d1 6f |
08:51:30.040 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.055 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:30.078 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:30.079 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:30.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.111 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:30.111 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 78 01 26 0b 43 d3 67 83 22 c4 4d c5 4b |
08:51:30.158 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.158 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.172 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:30.195 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:30.195 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:30.218 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.252 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:30.252 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 84 1e 60 ea 60 c4 4a 92 6f 19 68 01 9b |
08:51:30.296 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:30.334 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:30.334 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:30.358 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.360 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:30.361 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 90 18 68 50 43 03 f0 6c fc 96 21 00 09 |
08:51:30.407 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.419 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:30.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:30.443 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:30.466 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.488 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:30.488 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 9c 89 01 03 f0 67 fc 03 0a 6b 60 03 23 |
08:51:30.533 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.533 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:30.570 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:30.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:30.594 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.621 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:30.621 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef a8 c0 b2 28 60 eb 60 04 33 ab 60 00 23 |
08:51:30.665 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:30.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:30.703 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:30.722 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:30.722 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef b4 2b 61 6a 68 20 00 32 43 6a 60 a3 60 |
08:51:30.727 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.727 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.769 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.769 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:30.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:30.807 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:30.831 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.855 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:30.855 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef c0 e3 60 23 61 63 61 01 f0 3b f8 01 24 |
08:51:30.900 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.901 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:30.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:30.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:30.938 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:30.947 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:30.947 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef cc 01 22 6b 69 1c 40 13 42 00 d0 8e e0 |
08:51:30.961 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:30.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.001 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.002 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:31.039 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:31.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:31.062 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.091 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:31.092 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef d8 c5 21 b1 4d 89 00 6a 58 b0 4b b1 4e |
08:51:31.136 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.151 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:31.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:31.174 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:31.177 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:31.177 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef e4 1a 40 c0 23 1b 02 13 43 6b 50 80 23 |
08:51:31.197 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.238 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.238 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.252 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:31.275 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:31.275 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:31.277 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:31.277 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef f0 01 22 9b 03 2b 60 9f 4b fa 21 5a 76 |
08:51:31.298 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.298 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.337 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.337 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:31.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:31.375 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:31.377 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:31.378 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef fc ab 4b 05 32 |
08:51:31.397 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.398 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.427 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.441 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:31.464 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:31.465 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:31.471 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:31.472 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3100 with 256 bytes and CRC32 0x260C9AD3 |
08:51:31.473 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ee 00 01 00 31 00 00 d3 9a 0c 26 |
08:51:31.487 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.523 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:31.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:31.561 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:31.564 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 4,3% |
08:51:31.566 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 00 5c 70 9c 70 3b 00 38 33 1c 70 3b 00 |
08:51:31.584 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.584 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.624 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:31.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:31.662 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:31.667 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:31.667 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 0c 39 33 1c 70 0f 23 33 73 3b 00 3d 33 |
08:51:31.687 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.727 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.727 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:31.765 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:31.769 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:31.784 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:31.784 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 18 1c 70 3b 00 3e 33 1c 70 3b 00 4b 33 |
08:51:31.793 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.832 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:31.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:31.868 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:31.870 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:31.870 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 24 1c 70 3b 00 4c 33 1c 70 3b 00 3c 33 |
08:51:31.894 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.931 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:31.946 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:31.969 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:31.969 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:31.971 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:31.971 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 30 1c 70 3b 00 3f 33 1a 70 33 00 94 33 |
08:51:31.991 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:31.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.031 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:32.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:32.069 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:32.071 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:32.071 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 3c 18 68 74 70 03 68 34 61 5b 68 74 61 |
08:51:32.091 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.131 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:32.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:32.174 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:32.197 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.228 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:32.228 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 48 b4 61 f4 61 34 62 74 62 34 72 74 72 |
08:51:32.273 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.291 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:32.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:32.310 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:32.333 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.352 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:32.352 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 54 b4 72 ff 31 98 47 3b 00 44 33 18 70 |
08:51:32.396 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.396 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:32.434 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:32.434 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:32.443 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:32.443 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 60 3b 00 01 22 3a 33 1a 70 3b 00 3b 33 |
08:51:32.458 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.498 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:32.535 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:32.535 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:32.558 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.568 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:32.568 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 6c 1a 70 f4 72 34 70 30 00 00 23 98 30 |
08:51:32.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.628 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:32.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:32.650 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:32.674 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.701 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:32.701 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 78 21 00 1a 00 00 68 01 34 00 f0 a6 fc |
08:51:32.745 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.745 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.759 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:32.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:32.783 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:32.792 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:32.792 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 84 16 2c f4 d1 80 21 89 48 49 01 01 f0 |
08:51:32.806 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.846 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:32.884 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:32.884 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:32.907 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.907 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.940 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:32.940 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 90 4f fe c0 21 87 48 c9 01 01 f0 4a fe |
08:51:32.985 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:32.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:32.999 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:33.028 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:33.030 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:33.052 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.052 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.063 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:33.064 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 9c 00 22 c0 21 85 4b c9 01 da 67 85 48 |
08:51:33.111 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:33.147 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:33.147 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:33.170 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.192 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:33.192 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef a8 01 f0 42 fe 02 23 84 4a 93 60 84 4a |
08:51:33.237 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:33.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:33.277 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:33.299 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.322 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:33.322 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef b4 11 68 c9 07 1f d4 12 68 1a 42 1c d1 |
08:51:33.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:33.404 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:33.404 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:33.427 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.444 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:33.444 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef c0 01 f0 10 fe 00 22 1d 68 5f 68 98 68 |
08:51:33.488 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:33.526 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:33.530 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:33.551 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.569 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:33.569 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef cc be 18 ac 18 90 42 01 d8 0c 33 05 e7 |
08:51:33.613 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.631 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:33.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:33.651 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:33.657 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:33.658 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef d8 24 68 04 32 34 60 f5 e7 00 22 1e 68 |
08:51:33.674 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.714 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.728 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:33.751 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:33.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:33.768 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:33.768 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef e4 5c 68 b5 18 94 42 01 d8 08 33 fe e6 |
08:51:33.779 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.779 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.815 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.830 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:33.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:33.854 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:33.857 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:33.858 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef f0 28 60 04 32 f7 e7 2b 68 67 e7 73 4b |
08:51:33.876 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.877 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.916 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.916 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:33.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:33.954 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:33.954 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:33.960 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:33.961 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef fc 5b 68 db 05 |
08:51:33.977 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:33.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.005 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.005 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:34.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:34.044 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:34.064 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:34.065 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.066 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.067 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3200 with 256 bytes and CRC32 0x437D28B0 |
08:51:34.067 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ee 00 01 00 32 00 00 b0 28 7d 43 |
08:51:34.110 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:34.147 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:34.147 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:34.152 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 5,7% |
08:51:34.156 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 00 00 d1 9c e0 7c 24 fa 20 01 3c 00 01 |
08:51:34.169 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.208 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.222 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:34.246 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:34.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:34.247 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:34.248 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 0c 02 f0 4a f9 00 2c f8 d1 fa 20 00 01 |
08:51:34.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.307 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:34.345 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:34.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:34.347 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:34.347 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 18 02 f0 44 f9 02 f0 64 fa 80 23 38 00 |
08:51:34.367 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.367 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:34.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:34.445 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:34.448 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:34.448 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 24 db 02 2b 60 30 30 01 f0 09 f8 fa 21 |
08:51:34.467 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:34.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:34.549 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:34.561 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:34.561 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 30 01 9b 89 00 18 68 03 f0 9b fb 3c 6b |
08:51:34.573 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.573 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:34.649 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:34.649 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:34.651 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:34.651 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 3c 01 38 03 22 e0 60 01 21 20 00 01 f0 |
08:51:34.672 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:34.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:34.750 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:34.752 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:34.752 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 48 77 f8 f4 23 01 22 ff 33 e3 61 63 68 |
08:51:34.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.812 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:34.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:34.850 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:34.872 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.902 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:34.903 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 54 13 43 63 60 34 00 b3 6a 28 34 20 00 |
08:51:34.947 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:34.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:34.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:34.985 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:35.007 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:34.987 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:35.027 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 60 9b 68 98 47 20 00 00 f0 a3 fa 00 28 |
08:51:35.071 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.071 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:35.109 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:35.109 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:35.133 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.154 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:35.154 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 6c 00 d1 48 e1 3c 00 38 34 02 f0 38 fa |
08:51:35.199 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.213 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:35.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:35.243 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:35.255 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:35.256 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 78 23 78 00 2b 10 d1 3a 00 4b 32 12 78 |
08:51:35.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.307 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:35.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:35.345 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:35.367 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.367 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.383 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:35.383 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 84 00 2a 00 d1 a2 e0 3a 00 3d 32 12 78 |
08:51:35.428 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.428 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:35.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:35.465 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:35.489 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.508 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:35.508 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 90 00 2a 00 d0 ae e0 4d 48 01 f0 2c ff |
08:51:35.553 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.568 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:35.591 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:35.591 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:35.600 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:35.601 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 9c 06 23 23 70 33 00 98 33 1d 68 2b 68 |
08:51:35.616 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.617 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.656 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:35.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:35.693 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:35.695 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:35.695 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef a8 28 00 5b 69 98 47 01 90 00 28 00 d1 |
08:51:35.715 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.755 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.755 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.769 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:35.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:35.793 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:35.816 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.816 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.850 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:35.850 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef b4 1d e1 2b 68 28 00 1b 69 98 47 00 78 |
08:51:35.895 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.895 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.909 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:35.932 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:35.932 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:35.934 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:35.934 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef c0 00 28 00 d1 15 e1 00 24 6c 61 01 9a |
08:51:35.954 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.954 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:35.994 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:35.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.008 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:36.031 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:36.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:36.053 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.053 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.073 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:36.074 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef cc 63 08 94 46 08 21 9c 44 d3 5c 01 22 |
08:51:36.118 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.118 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:36.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:36.156 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:36.179 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.179 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.215 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:36.215 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef d8 19 40 14 42 02 d0 19 00 7e 32 91 43 |
08:51:36.261 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:36.297 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:36.297 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:36.320 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.342 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:36.342 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef e4 62 1c 00 29 00 d1 fc e0 8b 43 61 46 |
08:51:36.388 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.389 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:36.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:36.426 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:36.448 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.448 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.461 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:36.461 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef f0 92 b2 0b 70 6a 61 00 2c 00 d0 c5 e0 |
08:51:36.505 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.520 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:36.543 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:36.543 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:36.545 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:36.545 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef fc 35 00 98 35 |
08:51:36.565 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.593 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:36.632 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:36.631 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:36.654 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.654 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.661 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:36.663 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3300 with 256 bytes and CRC32 0xEAD35F55 |
08:51:36.664 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ee 00 01 00 33 00 00 55 5f d3 ea |
08:51:36.705 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.719 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:36.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:36.742 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:36.745 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 7,2% |
08:51:36.753 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 00 21 00 28 68 00 f0 cb fb 3b 00 01 22 |
08:51:36.768 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.769 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.807 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.807 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:36.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:36.842 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:36.844 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:36.844 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 0c 4b 33 02 40 1a 70 01 23 18 42 0b d1 |
08:51:36.864 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.904 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:36.918 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:36.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:36.942 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:36.948 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:36.948 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 18 33 7a 00 2b 08 d0 20 00 2d 68 00 f0 |
08:51:36.968 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:36.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.009 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.022 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:37.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:37.046 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:37.063 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:37.064 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 24 43 f9 21 00 02 00 28 00 00 f0 fe fb |
08:51:37.073 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.073 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.109 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.109 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:37.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:37.147 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:37.149 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:37.157 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 b3 7a 00 2b b4 d0 3b 00 4b 33 00 22 |
08:51:37.169 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.209 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.210 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.224 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:37.247 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:37.248 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:37.254 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:37.254 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 3c 58 e0 fa 23 3a 6a 5b 00 39 6a 8a 42 |
08:51:37.270 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.310 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.324 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:37.347 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:37.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:37.349 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:37.349 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 48 01 d1 30 bf fa e7 01 3b 3a 6a 00 2b |
08:51:37.369 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.410 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:37.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:37.446 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:37.448 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:37.449 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 54 f6 d1 61 e7 c0 30 00 00 cc 30 00 00 |
08:51:37.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:37.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:37.548 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:37.571 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.593 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:37.593 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 60 d4 30 00 00 e0 00 00 10 b8 01 00 10 |
08:51:37.639 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:37.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:37.675 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:37.697 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.723 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:37.723 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 6c 60 01 00 10 f2 03 00 00 23 03 00 10 |
08:51:37.767 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.768 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:37.805 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:37.805 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:37.822 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:37.822 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 78 24 02 00 10 00 10 3c 00 61 c2 34 0f |
08:51:37.830 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.869 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:37.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:37.909 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:37.931 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:37.943 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:37.944 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 84 00 60 40 00 60 82 34 10 04 e1 00 e0 |
08:51:37.988 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:37.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.002 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:38.025 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:38.025 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:38.048 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.049 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.063 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:38.063 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 90 04 80 04 40 00 80 00 40 98 80 04 40 |
08:51:38.107 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.108 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:38.148 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:38.148 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:38.170 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.171 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.189 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:38.189 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 9c 00 80 04 40 00 e1 00 e0 ff 00 ff ff |
08:51:38.237 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.249 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:38.272 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:38.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:38.275 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:38.275 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef a8 38 01 00 10 39 01 00 10 0b 41 10 06 |
08:51:38.295 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.335 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.349 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:38.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:38.373 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:38.395 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.395 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.411 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:38.412 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef b4 65 c2 81 00 04 00 03 50 41 c2 74 00 |
08:51:38.456 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.457 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:38.494 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:38.494 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:38.510 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:38.510 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef c0 00 00 02 50 10 e0 00 e0 00 ed 00 e0 |
08:51:38.519 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.519 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.557 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.557 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:38.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:38.595 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:38.618 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.644 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:38.644 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef cc 74 71 00 00 3b 00 4c 33 1b 78 00 2b |
08:51:38.689 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:38.727 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:38.727 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:38.749 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.766 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:38.766 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef d8 47 d0 3b 00 3e 33 1b 78 00 2b 3b d1 |
08:51:38.810 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.825 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:38.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:38.848 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:38.871 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.871 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.881 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:38.881 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef e4 48 48 01 f0 85 fe 3b 00 06 22 38 33 |
08:51:38.926 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.926 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:38.940 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:38.963 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:38.963 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:38.971 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:38.971 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef f0 1a 70 55 e7 3a 00 4c 32 12 78 00 2a |
08:51:38.985 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:38.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.025 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.025 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:39.063 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:39.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:39.085 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.103 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:39.103 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef fc 3a d0 3a 00 |
08:51:39.136 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.150 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:39.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:39.174 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:39.176 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:39.186 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3400 with 256 bytes and CRC32 0x829411BF |
08:51:39.188 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ee 00 01 00 34 00 00 bf 11 94 82 |
08:51:39.197 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.233 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.247 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:39.271 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:39.271 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:39.273 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 8,6% |
08:51:39.274 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 00 3e 32 12 78 00 2a ed d0 40 49 74 1c |
08:51:39.293 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.293 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.333 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:39.370 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:39.371 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:39.373 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:39.374 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 0c 18 5d 00 28 36 d0 00 22 55 5c 05 42 |
08:51:39.393 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.393 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.433 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.434 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.448 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:39.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:39.471 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:39.473 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:39.474 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 18 2f d0 db 00 9b 18 da b2 01 92 07 22 |
08:51:39.494 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.494 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.534 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:39.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:39.572 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:39.574 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:39.574 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 24 13 40 cb 5c 75 1c 02 93 01 9b 02 9a |
08:51:39.594 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.634 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:39.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:39.677 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:39.688 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:39.688 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 30 dc 08 33 00 98 33 1b 68 03 93 2b 5d |
08:51:39.700 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.700 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.740 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:39.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:39.778 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:39.780 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:39.780 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 3c 13 42 00 d1 2e e7 01 98 00 f0 b2 f8 |
08:51:39.803 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.803 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.840 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.840 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:39.878 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:39.878 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:39.880 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:39.880 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 48 01 99 02 00 03 98 00 f0 6d fb 2b 5d |
08:51:39.900 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.940 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:39.940 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:39.954 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:39.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:39.977 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:39.979 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:39.979 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 54 02 9a 93 43 2b 55 21 e7 3b 00 3d 33 |
08:51:40.000 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.040 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:40.078 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:40.078 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:40.079 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:40.080 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 60 1b 78 00 2b d0 d0 2a 48 bd e7 3b 00 |
08:51:40.099 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.140 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:40.177 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:40.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:40.179 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:40.179 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 6c 3d 33 1b 78 00 2b f8 d1 3b 00 3e 33 |
08:51:40.199 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.239 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.253 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:40.276 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:40.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:40.294 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:40.294 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 78 f2 e7 01 32 08 2a c9 d1 01 33 03 2b |
08:51:40.302 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.302 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.339 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.339 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:40.377 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:40.377 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:40.402 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.420 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:40.420 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 84 c2 d1 0b e7 35 00 98 35 28 68 01 2c |
08:51:40.466 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.480 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:40.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:40.503 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:40.526 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.526 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.554 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:40.554 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 90 1c d1 01 21 00 f0 03 fb 3b 00 02 00 |
08:51:40.600 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.600 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:40.636 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:40.636 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:40.660 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.660 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.685 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:40.685 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 9c 4c 33 22 40 1a 70 20 42 0b d1 73 7a |
08:51:40.729 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.730 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:40.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:40.767 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:40.791 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.791 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.812 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:40.813 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef a8 00 2b 08 d0 01 20 2c 68 00 f0 7c f8 |
08:51:40.857 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.858 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.871 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:40.894 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:40.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:40.917 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:40.953 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:40.953 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef b4 01 21 02 00 20 00 00 f0 37 fb b3 7a |
08:51:40.997 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:40.998 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.012 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:41.035 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:41.035 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:41.058 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.069 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:41.069 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef c0 00 2b 00 d1 ec e6 3b 00 4c 33 36 e7 |
08:51:41.114 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.114 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:41.151 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:41.151 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:41.177 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.189 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:41.200 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef cc 02 2c 00 d0 e6 e6 3a 00 00 23 4b 32 |
08:51:41.245 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.245 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:41.282 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:41.282 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:41.299 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:41.299 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef d8 13 70 3a 00 4c 32 13 70 01 33 b3 72 |
08:51:41.307 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.344 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.344 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:41.382 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:41.382 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:41.405 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.422 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:41.422 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef e4 dc e6 94 b2 a0 42 00 d9 ed e6 01 23 |
08:51:41.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.469 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:41.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:41.506 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:41.529 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.36->13/3/0 L_Data.ind, low priority hop count 6, tpdu 00 80 00 00 |
08:51:41.633 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:41.634 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef f0 6b 61 30 6d 00 f0 0e f8 00 28 00 d1 |
08:51:41.680 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:41.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:41.716 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:41.720 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:41.740 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.721 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef fc ac e6 30 bf |
08:51:41.791 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.791 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.809 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:41.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:41.829 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:41.852 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.878 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 05 a0 |
08:51:41.891 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:41.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 07 08 |
08:51:41.927 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3500 with 256 bytes and CRC32 0x21D5EADD |
08:51:41.928 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ee 00 01 00 35 00 00 dd ea d5 21 |
08:51:41.968 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:41.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:41.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:42.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:42.006 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:42.029 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.029 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.009 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 10,1% |
08:51:42.057 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 00 aa e6 02 f0 f1 f8 a7 e6 7b 71 00 00 |
08:51:42.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.117 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:42.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:42.140 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:42.142 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:42.142 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 0c 61 72 00 00 82 71 00 00 02 00 2c 32 |
08:51:42.162 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.203 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.203 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.216 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:42.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:42.240 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:42.250 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:42.250 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 18 11 78 03 00 01 29 03 d0 00 20 12 78 |
08:51:42.263 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.303 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.303 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.317 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:42.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:42.341 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:42.343 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:42.344 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 24 82 42 03 d1 d8 6c 43 42 58 41 c0 b2 |
08:51:42.363 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.403 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.418 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:42.441 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:42.441 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:42.443 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:42.443 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 30 70 47 07 49 0a 78 82 42 07 d0 42 40 |
08:51:42.463 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.503 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.517 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:42.540 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:42.540 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:42.542 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:42.543 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 3c 8b 78 d2 07 04 d5 20 22 13 43 8b 70 |
08:51:42.562 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.602 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.602 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.616 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:42.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:42.642 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:42.655 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:42.655 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 48 08 70 70 47 40 22 f9 e7 38 01 00 10 |
08:51:42.666 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.705 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.705 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.719 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:42.743 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:42.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:42.745 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:42.745 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 54 80 23 db 04 c1 18 11 4b 02 00 99 42 |
08:51:42.767 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.768 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.807 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.807 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:42.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:42.845 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:42.848 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:42.848 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 60 1c d8 00 28 12 db 80 21 00 20 09 01 |
08:51:42.868 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.909 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.909 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:42.922 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:42.945 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:42.945 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:42.948 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:42.948 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 6c 8a 42 12 da c0 02 10 43 80 b2 08 e0 |
08:51:42.967 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:42.967 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.007 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.022 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:43.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:43.048 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:43.061 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:43.061 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 78 01 23 52 10 52 05 db 02 50 0d 18 43 |
08:51:43.071 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.071 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.110 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:43.147 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:43.147 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:43.170 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.187 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:43.188 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 84 80 23 1b 02 18 43 70 47 05 4b 98 42 |
08:51:43.232 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.232 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:43.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:43.270 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:43.294 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.312 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:43.312 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 90 f2 db 00 23 f2 e7 52 10 01 30 e7 e7 |
08:51:43.356 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.357 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.370 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:43.394 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:43.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:43.417 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.417 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.442 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:43.442 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 9c 02 48 f4 e7 00 80 ff 07 00 f8 ff ff |
08:51:43.489 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:43.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:43.523 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:43.547 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.558 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:43.558 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef a8 ff 7f 00 00 03 23 43 43 4b 49 70 b5 |
08:51:43.602 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.617 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:43.640 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:43.640 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:43.662 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.666 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:43.667 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef b4 5a 5c 0e 2a 2a d1 0e 28 00 d9 89 e0 |
08:51:43.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.725 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:43.749 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:43.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:43.774 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.803 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:43.803 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef c0 03 f0 56 fb 08 0c 0f 08 12 0c 88 88 |
08:51:43.847 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.862 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:43.885 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:43.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:43.895 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:43.895 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef cc 88 88 88 88 23 17 1c 00 43 4b 1c 7a |
08:51:43.908 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.948 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:43.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:43.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:43.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:43.986 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:44.009 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.030 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:44.030 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef d8 20 00 70 bd 41 4b 5c 7a fa e7 40 4b |
08:51:44.076 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.076 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.089 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:44.112 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:44.112 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:44.135 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.163 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:44.164 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef e4 9c 7a f7 e7 3e 4b dc 7a 63 1e 9c 41 |
08:51:44.210 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.210 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:44.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:44.246 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:44.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->1/2/60 L_Data.ind, normal priority hop count 5, tpdu 00 80 00 |
08:51:44.289 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.301 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:44.301 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef f0 f2 e7 3c 4b 1c 78 01 23 1c 40 ed e7 |
08:51:44.345 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.359 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:44.383 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:44.383 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:44.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.416 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:44.416 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef fc 01 24 39 4b |
08:51:44.450 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.450 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.464 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:44.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:44.488 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:44.514 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.536 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:44.538 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3600 with 256 bytes and CRC32 0xA357EDE8 |
08:51:44.538 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ee 00 01 00 36 00 00 e8 ed 57 a3 |
08:51:44.580 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.581 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:44.616 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:44.616 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:44.618 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 11,5% |
08:51:44.618 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 00 1b 78 9c 42 a4 41 64 42 e6 e7 36 4b |
08:51:44.638 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.638 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.679 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:44.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:44.716 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:44.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->2/2/70 L_Data.ind, normal priority hop count 5, tpdu 00 80 ff |
08:51:44.753 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:44.753 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 0c 1c 78 e3 e7 0f 2a 5f d0 33 4b 1d 7b |
08:51:44.763 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.763 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.799 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:44.837 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:44.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:44.839 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:44.839 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 18 1c 1d 95 42 02 d0 0c 34 92 00 a4 18 |
08:51:44.863 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->2/2/60 L_Data.ind, normal priority hop count 5, tpdu 00 80 ff |
08:51:44.880 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.880 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.920 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.920 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:44.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:44.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:44.957 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:44.961 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:44.961 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 24 03 22 42 43 89 18 88 78 4a 78 01 38 |
08:51:44.982 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:44.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.021 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.022 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.036 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:45.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:45.060 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:45.063 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:45.064 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 30 a2 18 05 28 50 d8 14 78 03 f0 10 fb |
08:51:45.084 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.124 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.138 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:45.161 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:45.161 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:45.163 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:45.163 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 3c 03 27 ce 2b 3f 0d 51 78 93 78 09 04 |
08:51:45.183 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.223 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:45.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:45.261 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:45.262 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:45.262 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 48 24 06 d2 78 1b 02 0c 43 1c 43 14 43 |
08:51:45.283 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.283 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.322 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.337 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:45.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:45.361 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:45.377 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:45.377 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 54 c0 e7 50 78 91 78 00 04 24 06 09 02 |
08:51:45.386 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.386 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.423 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.423 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.437 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:45.461 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:45.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:45.463 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:45.463 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 60 04 43 0c 43 fc 21 94 33 18 68 d2 78 |
08:51:45.482 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.522 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:45.560 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:45.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:45.562 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:45.562 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 6c 03 68 14 43 5b 68 ff 31 a4 08 98 47 |
08:51:45.581 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.582 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.622 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.622 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.636 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:45.659 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:45.659 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:45.661 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:45.661 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 78 00 07 ad d5 e1 21 20 00 09 01 03 f0 |
08:51:45.681 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.681 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.721 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:45.758 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:45.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:45.760 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:45.760 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 84 75 f9 04 00 a6 e7 53 78 24 02 1c 43 |
08:51:45.781 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.781 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.821 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:45.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:45.859 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:45.882 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.906 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:45.906 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 90 a2 e7 52 78 ff 21 a2 18 19 24 94 33 |
08:51:45.952 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:45.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:45.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:45.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:45.989 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:46.013 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.013 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.039 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:46.039 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 9c 18 68 54 43 03 68 11 4a 5b 68 49 00 |
08:51:46.085 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:46.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:46.122 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:46.149 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.150 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.174 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:46.174 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef a8 a4 18 98 47 43 b2 0a 20 58 43 00 19 |
08:51:46.218 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:46.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:46.256 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:46.259 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:46.259 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef b4 ff f7 4e ff e5 e7 53 78 00 2c 01 d1 |
08:51:46.279 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.319 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:46.357 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:46.357 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:46.380 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.380 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.406 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:46.407 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef c0 01 2b 0b d0 09 48 24 02 1c 43 05 21 |
08:51:46.451 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.451 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:46.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:46.489 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:46.511 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.512 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.531 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:46.531 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef cc 60 43 03 f0 4f f9 ef e7 01 24 96 e7 |
08:51:46.577 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.591 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:46.614 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:46.614 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:46.633 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:46.633 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef d8 02 24 94 e7 04 4c 7b e7 8c 71 00 00 |
08:51:46.641 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.641 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:46.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:46.716 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:46.738 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.738 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.753 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:46.753 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef e4 38 01 00 10 30 f8 ff ff e0 23 00 00 |
08:51:46.798 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:46.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:46.835 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:46.857 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.858 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.877 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:46.877 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef f0 ff 87 00 00 70 47 00 69 70 47 00 69 |
08:51:46.922 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:46.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:46.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:46.959 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:46.981 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:46.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.007 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:47.008 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef fc 01 30 70 47 |
08:51:47.041 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:47.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:47.079 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:47.082 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:47.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.126 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3700 with 256 bytes and CRC32 0x0B67EC19 |
08:51:47.129 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ee 00 01 00 37 00 00 19 ec 67 0b |
08:51:47.171 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.172 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:47.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:47.207 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:47.230 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.214 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 12,9% |
08:51:47.241 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 00 00 69 02 30 70 47 00 69 03 30 70 47 |
08:51:47.285 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:47.323 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:47.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:47.344 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.368 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:47.368 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 0c 00 69 04 30 70 47 00 69 05 30 70 47 |
08:51:47.412 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:47.450 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:47.450 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:47.453 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:47.453 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 18 00 69 06 30 70 47 00 69 07 30 70 47 |
08:51:47.473 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.513 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:47.550 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:47.551 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:47.552 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:47.552 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 24 00 69 08 30 70 47 00 69 09 30 70 47 |
08:51:47.572 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:47.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:47.650 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:47.652 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:47.652 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 30 00 69 0a 30 70 47 00 69 0b 30 70 47 |
08:51:47.674 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:47.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:47.749 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:47.760 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:47.760 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 3c 00 69 0c 30 70 47 00 69 0d 30 70 47 |
08:51:47.771 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.811 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.825 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:47.848 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:47.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:47.850 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:47.851 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 48 00 69 0e 30 70 47 00 69 0f 30 70 47 |
08:51:47.870 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.871 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.911 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:47.925 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:47.948 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:47.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:47.951 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:47.951 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 54 00 69 10 30 70 47 00 69 11 30 70 47 |
08:51:47.970 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:47.970 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.010 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.010 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:48.047 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:48.048 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:48.050 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:48.050 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 60 00 69 12 30 70 47 00 69 13 30 70 47 |
08:51:48.072 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.076 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.111 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.125 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:48.163 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:48.163 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:48.165 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:48.165 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 6c 00 69 14 30 70 47 00 69 15 30 70 47 |
08:51:48.185 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.225 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.226 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:48.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:48.263 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:48.266 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:48.266 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 78 00 69 16 30 70 47 00 69 17 30 70 47 |
08:51:48.289 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.327 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.327 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:48.365 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:48.365 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:48.368 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:48.368 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 84 00 69 19 30 70 47 00 69 ff 30 70 47 |
08:51:48.388 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.429 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:48.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:48.470 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:48.493 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.493 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.523 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:48.524 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 90 00 69 62 30 70 47 00 69 63 30 70 47 |
08:51:48.570 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:48.616 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:48.616 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:48.638 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.638 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.669 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:48.669 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 9c 60 20 70 47 61 20 70 47 00 48 70 47 |
08:51:48.713 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.728 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:48.751 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:48.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:48.753 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:48.753 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef a8 64 71 00 00 12 20 70 47 70 b5 03 79 |
08:51:48.773 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.814 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:48.851 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:48.851 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:48.874 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.874 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.902 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:48.902 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef b4 00 2b 01 d1 00 20 70 bd 83 6e c0 6e |
08:51:48.946 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:48.946 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:48.960 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:48.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:48.984 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:49.007 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.037 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:49.037 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef c0 1c 7d 5d 7d 03 68 9b 6c 98 47 09 23 |
08:51:49.081 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:49.119 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:49.119 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:49.142 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.163 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:49.163 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef cc 00 78 1c 40 08 2c f1 d1 01 2d ef d1 |
08:51:49.207 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:49.244 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:49.244 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:49.246 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:49.246 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef d8 ff 38 43 42 58 41 c0 b2 eb e7 81 82 |
08:51:49.266 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.306 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:49.344 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:49.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:49.365 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:49.365 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef e4 70 47 00 20 70 47 e0 23 9b 00 99 42 |
08:51:49.372 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.372 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.416 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.417 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.431 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:49.454 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:49.454 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:49.477 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.478 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.507 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:49.507 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef f0 02 d1 01 23 4c 30 03 70 00 20 70 47 |
08:51:49.551 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.552 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.566 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:49.589 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:49.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:49.600 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:49.600 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef fc 17 20 70 47 |
08:51:49.611 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.639 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.654 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:49.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:49.678 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:49.680 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:49.700 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.701 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.737 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3800 with 256 bytes and CRC32 0xCCD2D4D9 |
08:51:49.737 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ee 00 01 00 38 00 00 d9 d4 d2 cc |
08:51:49.778 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.779 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.791 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:49.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:49.815 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:49.817 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 14,4% |
08:51:49.817 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 00 00 22 83 6a 9a 60 70 47 bf f3 4f 8f |
08:51:49.837 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.876 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:49.914 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:49.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:49.917 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:49.917 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 0c 02 4b 03 4a da 60 bf f3 4f 8f fe e7 |
08:51:49.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.977 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:49.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:49.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:50.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:50.017 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:50.041 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.059 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:50.059 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 18 00 ed 00 e0 04 00 fa 05 70 b5 04 00 |
08:51:50.103 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.117 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:50.141 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:50.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:50.159 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:50.160 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 24 00 6d 0d 00 03 68 db 6e 98 47 06 78 |
08:51:50.166 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.204 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.204 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:50.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:50.245 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:50.247 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:50.247 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 30 20 6d 36 02 03 68 db 6e 98 47 43 78 |
08:51:50.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.307 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:50.344 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:50.344 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:50.346 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:50.346 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 3c 33 43 9d 42 11 d0 20 6d 03 68 db 6e |
08:51:50.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:50.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:50.444 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:50.446 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:50.446 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 48 98 47 2b 0a 03 70 20 6d 03 68 db 6e |
08:51:50.466 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.506 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.520 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:50.543 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:50.543 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:50.562 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:50.562 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 54 98 47 01 23 45 70 22 6d 13 75 03 4b |
08:51:50.568 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.568 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.611 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:50.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:50.645 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:50.646 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:50.647 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 60 1b 6a 32 33 93 61 a5 82 70 bd c0 46 |
08:51:50.666 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.706 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:50.744 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:50.744 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:50.749 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:50.749 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 6c b8 01 00 10 70 b5 05 00 00 6d 0c 00 |
08:51:50.770 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.770 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.807 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.807 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:50.844 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:50.844 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:50.847 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:50.847 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 78 03 68 db 68 98 47 00 28 05 d0 28 6d |
08:51:50.869 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.909 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.909 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:50.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:50.947 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:50.947 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:50.949 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:50.949 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 84 03 68 21 00 1b 68 98 47 70 bd 68 6b |
08:51:50.969 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:50.969 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.009 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:51.047 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:51.048 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:51.052 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:51.052 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 90 21 00 03 68 db 68 98 47 00 28 f7 d0 |
08:51:51.070 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.110 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:51.147 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:51.148 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:51.155 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:51.155 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 9c 68 6b f1 e7 37 b5 14 00 f0 22 01 25 |
08:51:51.173 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.213 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.213 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:51.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:51.251 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:51.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.32->6/1/11 L_Data.ind, low priority hop count 6, tpdu 00 80 07 48 |
08:51:51.295 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.321 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:51.321 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef a8 c0 6b 92 00 0a 40 6d 42 01 68 00 95 |
08:51:51.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.380 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:51.403 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:51.403 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:51.426 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.426 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.437 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:51.437 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef b4 cd 68 21 00 a8 47 01 20 3e bd c0 23 |
08:51:51.483 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.496 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:51.519 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:51.519 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:51.542 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.542 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.563 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:51.563 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef c0 f7 b5 08 9c 05 00 9b 00 99 42 69 d0 |
08:51:51.607 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:51.645 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:51.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:51.668 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.676 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:51.677 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef cc 0b d8 80 20 0e 00 01 3b ff 3b 86 43 |
08:51:51.722 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.722 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:51.760 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:51.760 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:51.782 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.792 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:51.794 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef d8 9e 42 20 d0 80 3b 99 42 0e d0 00 20 |
08:51:51.841 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:51.878 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:51.878 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:51.895 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:51.896 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef e4 fe bd 4b 4b 99 42 6d d0 4a 4b 99 42 |
08:51:51.904 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.940 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:51.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:51.963 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:51.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:51.978 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:52.001 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.001 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.036 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:52.036 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef f0 00 d1 85 e0 e0 23 9b 00 99 42 f2 d1 |
08:51:52.080 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.080 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:52.118 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:52.118 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:52.122 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:52.122 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef fc 4c 35 6a e0 |
08:51:52.144 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.150 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.171 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.171 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.186 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:52.209 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:52.210 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:52.233 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.266 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:52.267 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3900 with 256 bytes and CRC32 0x01B51703 |
08:51:52.268 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ee 00 01 00 39 00 00 03 17 b5 01 |
08:51:52.308 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:52.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:52.351 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:52.353 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 15,8% |
08:51:52.354 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 00 64 21 d3 79 12 7a 61 71 63 39 a1 71 |
08:51:52.373 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.413 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:52.450 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:52.451 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:52.474 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.489 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:52.489 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 0c 41 39 0b 43 e3 71 00 23 22 72 63 72 |
08:51:52.533 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:52.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:52.571 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:52.573 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:52.573 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 18 a3 72 01 20 e2 e7 0f 23 d6 79 10 7a |
08:51:52.593 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.633 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:52.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:52.673 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:52.695 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.695 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.713 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:52.713 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 24 1e 40 53 7a 1b 02 03 43 a0 20 5b ba |
08:51:52.757 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:52.795 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:52.795 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:52.811 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:52.811 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 30 9b b2 01 93 80 00 2b 68 81 42 1a d0 |
08:51:52.820 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.859 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:52.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:52.896 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:52.921 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.921 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.926 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:52.926 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 3c 22 00 2b 68 28 00 5b 6c 01 99 1f 00 |
08:51:52.974 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:52.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:52.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:53.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:53.007 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:53.030 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.039 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:53.039 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 48 0a 32 33 00 b8 47 43 1e 98 41 40 42 |
08:51:53.083 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.097 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:53.121 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:53.121 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:53.123 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:53.124 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 54 06 40 33 00 63 33 63 71 02 23 a3 71 |
08:51:53.144 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.187 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.188 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:53.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:53.221 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:53.224 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:53.226 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 60 3e 33 33 43 e3 71 01 9b 1b 0a 23 72 |
08:51:53.245 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.245 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.284 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.298 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:53.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:53.322 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:53.334 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:53.334 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 6c 01 9b 63 72 d3 e7 1b 6c 28 00 1f 00 |
08:51:53.345 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.385 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.387 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:53.422 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:53.433 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:53.456 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.451 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:53.466 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 78 01 99 33 00 0a 32 b8 47 00 28 ae d0 |
08:51:53.510 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:53.547 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:53.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:53.569 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.569 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.569 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:53.569 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 84 2b 68 28 00 9b 6b 98 47 1f 28 a8 d9 |
08:51:53.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.616 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:53.653 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:53.653 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:53.657 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:53.657 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 90 68 6b 03 68 5b 69 98 47 03 78 5b 07 |
08:51:53.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.718 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.732 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:53.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:53.756 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:53.759 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:53.759 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 9c a1 d5 cd e7 d3 79 9b 06 9d d1 63 23 |
08:51:53.779 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.779 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.819 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:53.856 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:53.856 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:53.879 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.881 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:53.881 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef a8 63 71 60 3b a3 71 3d 33 e3 71 03 68 |
08:51:53.927 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.927 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:53.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:53.964 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:53.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:53.966 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:53.967 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef b4 9b 6b 98 47 00 0a 20 72 2b 68 28 00 |
08:51:53.986 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:53.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.026 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.026 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:54.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:54.066 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:54.070 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:54.070 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef c0 9b 6b 98 47 60 72 a8 e7 53 7a 12 7a |
08:51:54.107 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.147 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.147 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.161 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:54.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:54.185 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:54.207 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.230 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:54.231 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef cc 4c 35 07 2a 01 d1 ff 2b 02 d0 01 23 |
08:51:54.275 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.275 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:54.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:54.313 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:54.335 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.348 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:54.348 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef d8 2b 70 82 e7 64 23 63 71 61 3b a3 71 |
08:51:54.393 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.414 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:54.431 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:54.431 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:54.453 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.453 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.482 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:54.485 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef e4 9e 33 e3 71 00 23 23 72 63 72 01 33 |
08:51:54.534 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.543 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:54.569 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:54.569 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:54.592 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.633 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:54.635 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef f0 a3 72 80 23 09 4a 5b 05 1a 60 02 23 |
08:51:54.679 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.694 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:54.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:54.718 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:54.741 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.757 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:54.758 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef fc 2b 70 8c e7 |
08:51:54.790 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.790 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.805 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:54.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:54.828 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:54.850 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.851 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.882 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:54.884 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3A00 with 256 bytes and CRC32 0x7037631E |
08:51:54.885 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ee 00 01 00 3a 00 00 1e 63 37 70 |
08:51:54.924 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.924 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:54.939 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:54.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:54.963 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:54.978 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 17,2% |
08:51:54.985 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 00 62 23 63 71 5f 3b a3 71 cf 33 e3 71 |
08:51:54.986 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:54.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.029 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:55.067 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:55.067 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:55.089 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.089 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.129 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:55.129 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 0c 00 23 23 72 83 e7 c0 46 81 03 00 00 |
08:51:55.175 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.175 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:55.212 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:55.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:55.214 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:55.214 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 18 d1 03 00 00 55 b0 1f 5e 01 00 30 b5 |
08:51:55.234 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.235 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.274 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:55.312 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:55.312 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:55.333 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.361 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:55.361 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 24 6a 31 0b 88 9b b2 03 61 c3 6c 00 2b |
08:51:55.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.419 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:55.443 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:55.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:55.444 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:55.444 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 30 0f d0 00 24 80 25 c4 64 02 68 0b 88 |
08:51:55.464 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.504 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.504 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:55.542 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:55.543 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:55.565 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.601 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:55.601 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 3c 2b 40 55 1d ec 77 94 1d e5 7f 01 2d |
08:51:55.646 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.660 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:55.683 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:55.683 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:55.706 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.718 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:55.718 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 48 10 d1 5a 42 53 41 5b 00 e3 77 00 23 |
08:51:55.762 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.762 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:55.800 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:55.800 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:55.823 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.840 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:55.840 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 54 01 22 0b 80 42 75 02 00 03 63 83 64 |
08:51:55.885 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.901 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:55.922 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:55.922 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:55.924 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:55.924 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 60 83 63 6c 32 6e 30 13 80 03 70 30 bd |
08:51:55.944 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.984 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:55.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:55.998 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:56.021 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:56.022 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:56.034 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:56.034 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 6c 07 32 d4 7f 01 2c ee d1 5c 42 63 41 |
08:51:56.045 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.084 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:56.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:56.122 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:56.125 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:56.125 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 78 5b 00 d3 77 e9 e7 03 68 70 b5 9b 68 |
08:51:56.145 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.185 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.200 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:56.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:56.223 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:56.225 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:56.228 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 84 04 00 0d 00 98 47 43 78 00 20 05 2b |
08:51:56.245 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.286 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:56.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:56.323 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:56.333 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:56.333 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 90 04 d9 23 68 29 00 20 00 5b 68 98 47 |
08:51:56.352 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.352 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.395 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.395 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:56.429 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:56.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:56.431 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:56.431 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 9c 70 bd 03 68 70 b5 05 00 5b 68 0e 00 |
08:51:56.452 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.491 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:56.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:56.529 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:56.531 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:56.531 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef a8 98 47 2b 68 04 00 1b 68 31 00 28 00 |
08:51:56.551 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.591 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.591 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.605 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:56.628 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:56.628 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:56.631 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:56.631 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef b4 98 47 02 19 53 1e 18 78 a4 1a 1a 19 |
08:51:56.651 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.691 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:56.729 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:56.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:56.731 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:56.731 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef c0 00 2a 00 dc 70 bd 01 3b 1a 78 00 02 |
08:51:56.750 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.790 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.790 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.805 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:56.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:56.828 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:56.829 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:56.829 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef cc 10 43 f6 e7 f7 b5 01 93 03 68 05 00 |
08:51:56.849 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.889 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.890 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:56.927 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:56.927 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:56.949 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:56.950 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:56.961 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:56.961 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef d8 1b 68 0e 00 17 00 98 47 04 1e 1b d0 |
08:51:57.005 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:57.043 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:57.043 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:57.064 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.065 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.093 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:57.093 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef e4 2b 68 31 00 5b 68 28 00 98 47 43 1c |
08:51:57.137 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.137 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.151 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:57.175 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:57.175 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:57.201 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.201 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.218 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:57.219 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef f0 14 d0 20 18 03 1b 00 2b 11 dc 2b 68 |
08:51:57.264 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:57.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:57.301 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:57.322 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.362 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:57.362 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef fc 28 00 5b 69 |
08:51:57.394 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:57.432 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:57.433 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:57.437 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:57.439 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3B00 with 256 bytes and CRC32 0x15E256BC |
08:51:57.442 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ee 00 01 00 3b 00 00 bc 56 e2 15 |
08:51:57.456 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.491 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:57.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:57.529 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:57.532 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 18,7% |
08:51:57.532 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 00 98 47 00 28 0a d0 73 10 c2 18 0f 21 |
08:51:57.552 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.552 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.592 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:57.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:57.630 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:57.656 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.684 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:57.684 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 0c c3 5c f6 07 09 d5 0b 40 01 99 09 01 |
08:51:57.728 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.728 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:57.765 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:57.766 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:57.787 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.787 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.767 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:57.789 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 18 0b 43 13 70 f7 bd 27 70 3f 0a 01 34 |
08:51:57.834 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.834 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:57.872 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:57.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:57.887 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:57.887 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 24 e6 e7 8b 43 01 99 f5 e7 10 b5 03 23 |
08:51:57.895 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.895 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.934 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:57.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:57.971 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:57.971 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:57.994 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:57.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.040 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:58.040 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 30 ff f7 ce ff 10 bd 30 b5 04 00 0d 00 |
08:51:58.084 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:58.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:58.123 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:58.145 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.166 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:58.166 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 3c 85 b0 0a 22 0b 49 01 a8 03 f0 db f8 |
08:51:58.221 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:51:58.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:51:58.259 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:51:58.262 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:58.262 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 48 23 68 29 00 9b 68 20 00 98 47 43 78 |
08:51:58.285 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.34->6/1/12 L_Data.ind, low priority hop count 6, tpdu 00 80 07 1a |
08:51:58.304 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.304 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.344 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.344 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:51:58.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:51:58.381 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:51:58.405 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.427 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:58.427 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 54 01 20 05 2b 05 dd 0f 2b 05 dc 01 aa |
08:51:58.474 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:51:58.510 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:51:58.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:51:58.531 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.531 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.575 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:58.575 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 60 d3 18 06 3b 18 78 05 b0 30 bd 01 20 |
08:51:58.619 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.619 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:51:58.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:51:58.657 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:51:58.662 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:58.662 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 6c 40 42 fa e7 69 71 00 00 43 68 10 b5 |
08:51:58.680 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.720 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.734 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:51:58.757 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:51:58.758 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:51:58.760 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:58.760 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 78 04 00 18 6d 03 68 db 6d 98 47 01 78 |
08:51:58.780 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.781 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.823 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:51:58.858 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:51:58.858 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:51:58.875 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:58.875 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 84 08 1e 06 d0 60 68 03 6d 5b 68 c9 18 |
08:51:58.883 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.922 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.922 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:58.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:51:58.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:51:58.959 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:51:58.970 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:58.970 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 90 89 b2 ff f7 6d fe 10 bd 03 68 10 b5 |
08:51:58.982 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:58.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.022 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.022 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.036 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:51:59.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:51:59.059 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:51:59.067 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:59.068 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 9c 1b 69 04 00 98 47 00 28 03 d0 41 78 |
08:51:59.084 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.124 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:51:59.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:51:59.162 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:51:59.184 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.194 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:59.194 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef a8 60 68 ff f7 61 fe 10 bd 03 68 10 b5 |
08:51:59.241 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:51:59.279 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:51:59.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:51:59.281 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:59.281 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef b4 1b 69 0c 00 98 47 00 28 03 d0 03 21 |
08:51:59.304 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.304 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.341 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.355 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:51:59.378 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:51:59.381 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:51:59.382 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:59.382 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef c0 61 43 02 31 40 18 10 bd 10 b5 04 00 |
08:51:59.403 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.403 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.442 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.457 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:51:59.480 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:51:59.480 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:51:59.482 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:59.482 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef cc ff f7 f0 ff 03 1e 0b d0 5b 78 01 78 |
08:51:59.505 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.542 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.542 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.556 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:51:59.580 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:51:59.580 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:51:59.592 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:59.593 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef d8 60 68 9b 06 03 d5 03 6d 5b 68 c9 18 |
08:51:59.602 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.602 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.641 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.641 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:51:59.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:51:59.679 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:51:59.682 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:59.682 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef e4 89 b2 ff f7 43 fe 03 00 18 00 10 bd |
08:51:59.702 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.702 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.742 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:51:59.779 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:51:59.782 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:51:59.805 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.805 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.832 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:59.834 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef f0 10 b5 ff f7 dd ff 01 30 10 bd 00 23 |
08:51:59.880 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.881 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:51:59.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:51:59.917 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:51:59.920 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:51:59.920 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef fc 42 1d 43 71 |
08:51:59.940 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.940 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.969 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:59.969 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:51:59.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:00.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:00.007 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:00.030 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.048 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:00.082 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3C00 with 256 bytes and CRC32 0xF739D17A |
08:52:00.086 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ee 00 01 00 3c 00 00 7a d1 39 f7 |
08:52:00.127 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.127 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.141 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:00.164 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:00.164 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:00.189 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.166 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 20,1% |
08:52:00.213 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 00 d3 77 82 1d d3 77 c2 1d d3 77 01 22 |
08:52:00.259 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:00.296 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:00.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:00.300 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:00.300 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 0c 52 42 02 81 02 32 02 71 02 4a c3 80 |
08:52:00.319 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.360 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:00.396 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:00.398 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:00.421 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.440 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:00.440 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 18 c3 60 93 84 d3 84 70 47 b8 01 00 10 |
08:52:00.486 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:00.523 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:00.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:00.525 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:00.525 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 24 02 22 43 1d 10 b5 da 77 0f 23 81 69 |
08:52:00.545 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.585 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.586 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.600 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:00.623 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:00.623 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:00.631 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:00.632 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 30 4a 79 1a 40 03 68 07 32 9b 6a 98 47 |
08:52:00.647 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.687 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.688 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.701 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:00.725 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:00.725 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:00.743 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:00.743 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 3c 10 bd 10 b5 43 6b 1b 7d db 07 10 d5 |
08:52:00.750 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.750 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.788 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.788 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.802 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:00.825 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:00.825 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:00.848 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.871 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:00.871 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 48 c0 29 05 d0 80 23 5b 00 99 42 0c d0 |
08:52:00.915 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:00.932 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:00.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:00.956 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:00.978 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:00.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.003 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:01.003 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 54 00 20 10 bd 51 7a 13 7a 09 02 19 43 |
08:52:01.048 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.048 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:01.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:01.086 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:01.108 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.109 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.124 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:01.124 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 60 03 68 49 ba db 68 89 b2 98 47 01 20 |
08:52:01.168 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:01.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:01.207 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:01.229 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.229 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.259 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:01.259 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 6c f3 e7 43 1d da 7f d1 b2 00 2a fb d1 |
08:52:01.305 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:01.342 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:01.342 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:01.345 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:01.345 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 78 01 32 da 77 83 69 b0 24 d9 70 19 71 |
08:52:01.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:01.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:01.443 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:01.462 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:01.462 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 84 e1 21 9a 71 3f 32 1c 70 59 71 da 71 |
08:52:01.470 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.506 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.521 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:01.544 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:01.547 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:01.563 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:01.563 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 90 ff f7 c8 ff e9 e7 f0 b5 85 b0 03 93 |
08:52:01.571 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.623 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:01.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:01.648 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:01.661 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:01.661 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 9c 03 68 02 91 1b 68 04 00 17 00 98 47 |
08:52:01.671 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:01.748 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:01.748 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:01.755 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:01.755 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef a8 02 99 06 00 20 00 ff f7 e6 fe 63 68 |
08:52:01.771 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.811 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.825 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:01.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:01.848 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:01.851 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:01.851 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef b4 5a 1d d1 7f cd b2 ac 46 00 29 fa d1 |
08:52:01.872 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.911 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:01.926 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:01.949 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:01.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:01.951 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:01.951 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef c0 01 31 d1 77 9b 69 bc 22 b9 b2 1f 71 |
08:52:01.972 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:01.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.011 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.025 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:02.049 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:02.050 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:02.052 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:02.052 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef cc 0f 27 1a 70 0a 0a da 70 42 1c 17 40 |
08:52:02.072 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.072 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.113 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.126 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:02.149 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:02.149 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:02.151 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:02.151 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef d8 20 22 52 42 3a 43 5a 71 03 9a 80 27 |
08:52:02.171 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.171 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.211 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.226 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:02.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:02.249 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:02.251 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:02.251 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef e4 00 2a 00 d0 40 3f 00 28 1f d0 1a 00 |
08:52:02.270 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.310 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.325 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:02.348 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:02.348 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:02.351 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:02.351 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef f0 01 3e 08 32 00 28 15 dc 62 46 00 26 |
08:52:02.371 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.411 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:02.448 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:02.448 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:02.450 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:02.450 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef fc 3a 43 9e 71 |
08:52:02.470 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.499 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:02.537 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:02.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:02.553 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:02.563 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.609 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3D00 with 256 bytes and CRC32 0xB1E889AE |
08:52:02.623 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ee 00 01 00 3d 00 00 ae 89 e8 b1 |
08:52:02.662 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:02.700 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:02.705 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:02.720 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 21,6% |
08:52:02.720 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 da 71 02 98 22 68 00 90 d7 68 20 00 |
08:52:02.729 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.767 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.781 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:02.804 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:02.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:02.827 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.829 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:02.829 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c 80 22 b8 47 60 68 ff f7 87 ff 02 9b |
08:52:02.874 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:02.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:02.912 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:02.935 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:02.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:02.966 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:02.966 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 18 e3 60 63 68 9b 6a 5e 75 05 b0 f0 bd |
08:52:03.010 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.010 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:03.048 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:03.048 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:03.071 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.071 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.071 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:03.071 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 24 35 5c 01 38 15 70 01 32 e2 e7 32 78 |
08:52:03.118 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.118 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:03.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:03.155 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:03.181 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.181 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.196 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:03.196 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 30 94 46 e1 e7 f0 b5 89 b0 06 93 43 68 |
08:52:03.240 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.254 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:03.278 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:03.280 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:03.302 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.302 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.318 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:03.318 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 3c 04 00 98 6b 04 91 03 68 05 92 9b 68 |
08:52:03.363 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.377 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:03.400 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:03.401 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:03.424 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.424 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.458 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:03.458 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 48 98 47 63 68 05 78 01 90 98 6b 04 99 |
08:52:03.502 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.517 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:03.540 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:03.540 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:03.563 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.598 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:03.598 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 54 03 68 1b 68 98 47 03 90 00 28 08 db |
08:52:03.642 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.642 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:03.679 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:03.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:03.681 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:03.681 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 60 6b 00 07 93 01 9b 5f 1c 01 9b 07 9a |
08:52:03.702 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.702 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.741 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:03.779 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:03.779 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:03.782 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:03.785 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 6c fb 1a 9a 42 01 da 09 b0 f0 bd 3b 78 |
08:52:03.801 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.841 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:03.879 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:03.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:03.889 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:03.889 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 78 03 9a 93 42 38 d1 7d 78 0e 9b 9d 42 |
08:52:03.902 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.902 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.942 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:03.942 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:03.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:03.979 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:03.983 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:04.004 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.040 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:04.040 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 84 34 d0 23 68 29 00 9b 68 20 00 98 47 |
08:52:04.085 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:04.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:04.127 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:04.150 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.150 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.172 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:04.172 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 90 40 22 05 9e 03 78 40 3e 96 43 32 d1 |
08:52:04.217 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.217 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:04.254 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:04.254 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:04.256 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:04.256 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 9c 2c 3a 13 40 93 42 25 d1 23 68 29 00 |
08:52:04.275 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.275 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.315 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:04.353 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:04.353 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:04.355 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:04.355 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef a8 20 00 1b 68 98 47 02 90 00 28 1d d0 |
08:52:04.376 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.377 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.414 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.415 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:04.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:04.452 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:04.454 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:04.454 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef b4 29 00 20 00 ff f7 61 fe 00 28 19 dd |
08:52:04.474 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.514 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.528 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:04.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:04.551 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:04.560 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:04.561 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef c0 06 9a c3 1d d3 18 72 42 9a 5c 02 99 |
08:52:04.573 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.573 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.614 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.614 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:04.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:04.651 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:04.653 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:04.653 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef cc 8a 55 01 36 86 42 f8 d1 23 68 20 00 |
08:52:04.674 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.714 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.728 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:04.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:04.751 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:04.753 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:04.753 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef d8 5b 69 98 47 00 28 07 d0 80 22 eb 07 |
08:52:04.773 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.813 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:04.850 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:04.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:04.852 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:04.852 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef e4 00 d4 78 3a 6d 10 43 5d 13 43 43 55 |
08:52:04.874 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.874 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.914 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:04.928 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:04.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:04.955 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:04.968 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:04.968 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef f0 02 37 b9 e7 3f 22 06 9b db 79 13 40 |
08:52:04.979 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:04.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.019 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:05.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:05.056 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:05.058 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:05.058 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef fc 02 9a 13 70 |
08:52:05.078 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.078 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.108 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.108 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.121 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:05.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:05.145 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:05.147 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:05.161 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3E00 with 256 bytes and CRC32 0x882CD963 |
08:52:05.162 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ee 00 01 00 3e 00 00 63 d9 2c 88 |
08:52:05.170 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.206 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:05.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:05.241 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:05.264 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.244 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 23,0% |
08:52:05.265 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 00 e8 e7 05 9a 00 2a f3 d1 0c 32 13 40 |
08:52:05.311 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.311 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.325 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:05.350 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:05.350 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:05.373 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.408 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:05.408 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 0c 93 42 ef d1 01 23 29 00 20 00 04 9a |
08:52:05.453 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.453 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.467 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:05.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:05.491 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:05.494 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:05.494 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 18 ff f7 3d ff e8 e7 f8 b5 0c 00 41 1d |
08:52:05.516 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.517 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.556 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.556 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:05.593 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:05.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:05.608 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:05.608 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 24 cd 7f 00 2d fc d1 40 26 01 35 cd 77 |
08:52:05.617 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.617 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.656 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:05.694 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:05.694 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:05.715 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.718 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:05.718 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 30 17 0a 85 69 d2 b2 34 42 03 d0 99 00 |
08:52:05.763 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.763 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:05.801 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:05.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:05.821 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:05.821 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 3c 21 43 0e 43 f4 b2 b0 23 2b 70 50 3b |
08:52:05.828 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.866 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.880 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:05.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:05.904 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:05.906 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:05.906 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 48 ef 70 2a 71 6b 71 ac 71 ff f7 e8 fe |
08:52:05.927 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.927 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.967 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:05.967 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:05.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:06.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:06.004 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:06.008 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:06.008 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 54 f8 bd 0b 4a 10 b5 93 8c 04 00 01 33 |
08:52:06.028 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.028 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.067 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:06.105 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:06.105 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:06.128 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.148 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:06.148 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 60 93 84 43 79 00 2b 01 d0 00 23 43 71 |
08:52:06.192 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:06.229 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:06.229 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:06.257 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.257 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:06.257 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 6c 81 21 20 00 e2 88 00 23 ff f7 d3 ff |
08:52:06.304 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.316 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:06.339 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:06.339 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:06.362 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.427 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:06.427 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 78 23 68 20 00 db 69 98 47 10 bd c0 46 |
08:52:06.471 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:06.509 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:06.511 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:06.534 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.590 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:06.590 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 84 b8 01 00 10 00 23 82 1d 07 30 d3 77 |
08:52:06.634 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.649 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:06.672 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:06.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:06.690 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:06.690 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 90 c3 77 70 47 42 68 03 00 00 20 91 42 |
08:52:06.698 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.735 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:06.773 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:06.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:06.796 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.796 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.840 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:06.840 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 9c 03 d3 9b 68 8b 42 40 41 c0 b2 70 47 |
08:52:06.885 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:06.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:06.923 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:06.949 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:06.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:06.983 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:06.983 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef a8 03 00 10 b5 00 20 91 42 06 d8 5c 68 |
08:52:07.027 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.027 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:07.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:07.064 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:07.087 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.102 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:07.102 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef b4 a1 42 03 d3 9b 68 93 42 40 41 c0 b2 |
08:52:07.146 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:07.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:07.187 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:07.196 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:07.196 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef c0 10 bd 43 68 00 69 c9 1a 40 18 70 47 |
08:52:07.212 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.249 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:07.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:07.288 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:07.290 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:07.290 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef cc 42 68 03 00 89 1a c2 68 00 20 01 3a |
08:52:07.313 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.350 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.350 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:07.387 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:07.388 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:07.389 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:07.389 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef d8 8a 42 01 d3 1b 69 58 5c 70 47 42 68 |
08:52:07.409 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.409 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.449 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:07.487 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:07.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:07.489 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:07.489 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef e4 10 b5 89 1a c2 68 4c 1c 01 3a 03 00 |
08:52:07.518 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.550 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.550 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:07.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:07.590 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:07.597 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:07.597 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef f0 00 20 94 42 04 d8 1a 69 53 5c 10 5d |
08:52:07.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.652 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:07.689 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:07.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:07.691 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:07.691 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef fc 1b 02 18 43 |
08:52:07.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.740 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:07.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:07.778 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:07.780 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:07.789 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3F00 with 256 bytes and CRC32 0x591CA884 |
08:52:07.789 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ee 00 01 00 3f 00 00 84 a8 1c 59 |
08:52:07.801 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.836 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.851 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:07.874 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:07.876 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:07.880 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 24,4% |
08:52:07.882 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 00 10 bd 43 68 00 69 c9 1a 40 18 70 47 |
08:52:07.897 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.938 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:07.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:07.975 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:07.975 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:07.978 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:07.978 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 0c 42 68 03 00 89 1a c2 68 00 20 01 3a |
08:52:07.998 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:07.998 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.038 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.038 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.052 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:08.076 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:08.077 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:08.095 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:08.095 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 18 8a 42 01 d3 1b 69 58 5c 70 47 42 68 |
08:52:08.101 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.101 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.140 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:08.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:08.179 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:08.218 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.242 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:08.242 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 24 10 b5 89 1a c2 68 4c 1c 01 3a 03 00 |
08:52:08.286 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:08.324 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:08.324 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:08.348 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.348 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.384 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:08.385 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 30 00 20 94 42 04 d8 1a 69 53 5c 10 5d |
08:52:08.429 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:08.467 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:08.467 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:08.480 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:08.480 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 3c 1b 02 18 43 10 bd c2 68 83 68 9a 42 |
08:52:08.491 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.530 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.544 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:08.568 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:08.568 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:08.581 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:08.581 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 48 03 d0 83 68 c0 18 00 7e 70 47 01 20 |
08:52:08.590 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.591 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.630 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:08.667 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:08.668 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:08.690 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.728 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:08.728 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 54 40 42 fb e7 c3 68 80 68 18 1a 00 d5 |
08:52:08.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:08.809 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:08.810 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:08.831 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.870 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:08.873 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 60 80 30 70 47 10 b5 06 4b 00 2a 01 d1 |
08:52:08.918 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.918 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:08.932 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:08.955 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:08.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:08.978 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:08.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.008 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:09.009 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 6c 98 47 10 bd bf f3 4f 8f bf f3 6f 8f |
08:52:09.055 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.055 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.067 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:09.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:09.091 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:09.113 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.132 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:09.132 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 78 72 b6 98 47 62 b6 f6 e7 f1 1f ff 1f |
08:52:09.176 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.176 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:09.213 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:09.213 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:09.236 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.276 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:09.277 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 84 32 23 30 b5 8b b0 00 93 03 09 01 93 |
08:52:09.321 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:09.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:09.359 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:09.381 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.409 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:09.409 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 90 05 00 0b 09 0c 00 01 22 68 46 05 a9 |
08:52:09.455 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.455 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:09.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:09.495 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:09.518 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.531 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:09.531 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 9c 02 93 ff f7 e1 ff 05 9b db b2 05 93 |
08:52:09.576 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:09.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:09.614 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:09.636 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.636 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.670 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:09.670 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef a8 00 2b 0f d1 fa 21 3b 33 00 93 08 4b |
08:52:09.715 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:09.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:09.752 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:09.775 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.814 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:09.814 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef b4 89 00 18 68 01 95 02 94 02 f0 d8 fc |
08:52:09.860 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:09.898 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:09.898 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:09.920 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:09.921 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.921 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.921 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef c0 01 22 03 90 05 a9 68 46 ff f7 cc ff |
08:52:09.972 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:09.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:09.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:10.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:10.004 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:10.006 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:10.006 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef cc 05 98 c0 b2 0b b0 30 bd e0 00 00 10 |
08:52:10.026 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.026 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.066 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.066 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.080 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:10.104 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:10.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:10.114 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:10.114 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef d8 f0 b5 c3 17 1b 05 1b 0d c3 18 04 00 |
08:52:10.126 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.127 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.167 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.181 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:10.204 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:10.205 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:10.207 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:10.220 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef e4 0e 00 15 00 8b b0 1b 13 bf f3 4f 8f |
08:52:10.229 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.229 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.281 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:10.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:10.305 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:10.308 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:10.308 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef f0 bf f3 6f 8f 72 b6 32 22 68 46 00 92 |
08:52:10.328 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.368 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.368 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.382 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:10.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:10.405 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:10.407 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:10.407 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef fc 05 a9 00 22 |
08:52:10.427 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.455 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.455 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:10.494 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:10.494 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:10.510 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:10.511 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4000 with 256 bytes and CRC32 0x4236E746 |
08:52:10.511 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ee 00 01 00 40 00 00 46 e7 36 42 |
08:52:10.519 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.519 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.552 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.552 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.567 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:10.590 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:10.593 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:10.600 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 25,9% |
08:52:10.604 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 00 01 93 02 93 ff f7 ae ff 05 9f ff b2 |
08:52:10.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.655 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.655 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:10.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:10.693 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:10.696 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:10.696 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 0c 05 97 00 2f 04 d0 62 b6 05 98 c0 b2 |
08:52:10.718 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.719 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.755 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.770 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:10.793 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:10.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:10.811 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:10.811 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 18 0b b0 f0 bd 33 23 fa 21 00 93 0d 4b |
08:52:10.821 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.855 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.870 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:10.893 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:10.893 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:10.895 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:10.895 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 24 89 00 18 68 01 94 02 96 03 95 02 f0 |
08:52:10.915 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:10.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:10.969 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:10.993 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:10.993 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:10.996 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:10.996 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 30 9f fc 3a 00 04 90 05 a9 68 46 ff f7 |
08:52:11.015 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.054 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:11.092 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:11.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:11.115 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.115 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:11.116 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 3c 93 ff 05 9a 00 2a e6 d1 38 23 68 46 |
08:52:11.161 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.161 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.175 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:11.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:11.199 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:11.202 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:11.202 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 48 05 a9 00 93 01 94 02 96 03 95 ff f7 |
08:52:11.223 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.264 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.278 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:11.301 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:11.304 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:11.326 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.326 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.349 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:11.349 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 54 87 ff dc e7 e0 00 00 10 30 b5 0c 4d |
08:52:11.393 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.393 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:11.432 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:11.432 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:11.454 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.454 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.471 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:11.471 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 60 8b b0 a8 6a 00 28 11 d1 35 23 02 24 |
08:52:11.518 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:11.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:11.553 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:11.576 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.586 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:11.586 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 6c 00 93 01 22 68 46 05 a9 01 94 02 94 |
08:52:11.631 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.631 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:11.669 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:11.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:11.692 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.718 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:11.718 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 78 ff f7 74 ff 05 9b 07 2b 02 d0 02 34 |
08:52:11.762 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.762 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:11.800 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:11.800 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:11.802 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:11.802 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 84 80 2c f2 d1 20 03 a8 62 0b b0 30 bd |
08:52:11.823 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.863 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.863 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.877 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:11.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:11.900 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:11.923 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.927 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:11.927 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 90 b8 01 00 10 f8 b5 04 00 ff f7 e0 ff |
08:52:11.972 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:11.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:11.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:12.009 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:12.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:12.033 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.048 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:12.048 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 9c 0c 4f c5 19 ff f7 dc ff c7 19 80 20 |
08:52:12.092 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:12.130 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:12.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:12.146 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:12.146 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef a8 e6 69 40 01 31 00 02 f0 5f fc 01 38 |
08:52:12.156 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.194 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:12.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:12.232 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:12.255 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.278 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:12.278 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef b4 70 43 38 18 a8 42 01 d2 00 20 f8 bd |
08:52:12.322 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:12.360 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:12.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:12.383 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.383 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.415 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:12.415 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef c0 e3 68 c3 18 01 3b 1b 78 ff 2b f8 d1 |
08:52:12.461 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.462 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:12.497 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:12.503 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:12.525 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.526 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.547 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:12.547 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef cc 80 1b f3 e7 00 f0 ff ff f8 b5 05 00 |
08:52:12.592 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.606 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:12.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:12.630 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:12.651 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.668 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:12.669 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef d8 0c 00 00 26 8f 18 bc 42 01 d1 30 00 |
08:52:12.714 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:12.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:12.752 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:12.775 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.801 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:12.801 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef e4 f8 bd 2b 68 21 78 28 00 5b 68 98 47 |
08:52:12.846 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:12.883 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:12.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:12.886 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:12.886 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef f0 01 34 36 18 f3 e7 02 00 ff 32 52 7e |
08:52:12.906 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.947 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:12.947 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:12.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:12.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:12.986 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:12.999 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:12.999 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef fc 03 00 10 1e |
08:52:13.010 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.010 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.036 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.036 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.051 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:13.075 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:13.075 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:13.093 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:13.095 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4100 with 256 bytes and CRC32 0xDD3F9859 |
08:52:13.095 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ee 00 01 00 41 00 00 59 98 3f dd |
08:52:13.101 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.101 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 04 ec |
08:52:13.159 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:13.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:13.198 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:13.205 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 27,3% |
08:52:13.207 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 00 0d d0 18 69 5a 69 90 42 0a d1 0c 4a |
08:52:13.221 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.261 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:13.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:13.299 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:13.301 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:13.301 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 0c 50 69 80 06 06 d5 11 60 02 23 01 20 |
08:52:13.320 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.362 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:13.398 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:13.398 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:13.400 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:13.400 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 18 51 68 0b 43 53 60 70 47 7f 20 5a 69 |
08:52:13.420 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.461 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:13.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:13.498 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:13.501 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:13.501 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 24 01 32 02 40 18 69 82 42 fc d0 58 69 |
08:52:13.521 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.521 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.561 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:13.599 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:13.599 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:13.601 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:13.602 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 30 18 18 98 30 01 70 5a 61 00 4a eb e7 |
08:52:13.622 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.622 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.662 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:13.699 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:13.701 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:13.704 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:13.704 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 3c 00 80 00 40 03 00 ff 33 5b 7e 00 2b |
08:52:13.727 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.727 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.764 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.765 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.780 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:13.802 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:13.807 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:13.816 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:13.817 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 48 03 d0 02 69 43 69 9a 42 fb d1 70 47 |
08:52:13.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 0c ec |
08:52:13.850 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.890 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.890 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:13.927 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:13.927 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:13.950 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:13.950 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:13.984 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:13.984 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 54 19 4b 30 b5 5a 69 92 06 07 d5 01 69 |
08:52:14.029 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:14.067 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:14.067 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:14.090 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.121 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:14.121 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 60 42 69 91 42 09 d1 02 21 5a 68 8a 43 |
08:52:14.166 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.180 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:14.204 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:14.204 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:14.225 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.225 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.243 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:14.243 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 6c 5a 60 01 24 7f 21 5a 69 22 42 0d d1 |
08:52:14.291 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.291 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.302 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:14.325 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:14.325 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:14.348 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.348 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.375 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:14.375 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 78 30 bd 7f 21 02 69 82 18 98 32 12 78 |
08:52:14.420 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:14.456 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:14.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:14.475 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:14.475 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 84 1a 60 02 69 01 32 02 61 02 69 0a 40 |
08:52:14.484 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.484 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.520 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.520 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:14.558 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:14.558 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:14.570 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:14.570 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 90 02 61 ec e7 c2 68 85 68 01 32 0a 40 |
08:52:14.581 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.581 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.620 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.635 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:14.658 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:14.658 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:14.666 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:14.666 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 9c aa 42 0a d0 1d 68 c2 68 82 18 15 76 |
08:52:14.681 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.681 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.721 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:14.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:14.761 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:14.783 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.784 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.798 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:14.798 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef a8 c2 68 01 32 c2 60 c2 68 0a 40 c2 60 |
08:52:14.842 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.856 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:14.880 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:14.880 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:14.900 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:14.900 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef b4 dd e7 1a 68 db e7 c0 46 00 80 00 40 |
08:52:14.906 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.907 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.945 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:14.945 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:14.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:14.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:14.983 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:15.006 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.007 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:15.007 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef c0 03 00 70 b5 ff 33 5b 7e 00 2b 28 d0 |
08:52:15.052 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.053 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.067 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:15.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:15.090 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:15.113 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.153 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:15.154 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef cc 7f 25 c3 68 81 68 c4 68 82 68 01 33 |
08:52:15.198 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:15.235 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:15.235 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:15.247 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:15.247 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef d8 2b 40 94 42 1c d0 82 68 82 18 14 7e |
08:52:15.259 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.299 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:15.336 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:15.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:15.338 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:15.338 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef e4 82 68 01 32 82 60 82 68 2a 40 82 60 |
08:52:15.358 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.398 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.412 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:15.436 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:15.436 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:15.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.506 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:15.509 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef f0 8b 42 0f d1 0b 4b 5b 69 db 07 0b d5 |
08:52:15.554 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.568 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:15.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:15.592 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:15.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.644 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:15.644 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef fc bf f3 4f 8f |
08:52:15.679 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:15.717 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:15.717 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:15.719 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:15.720 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4200 with 256 bytes and CRC32 0x039EECFF |
08:52:15.721 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ee 00 01 00 42 00 00 ff ec 9e 03 |
08:52:15.739 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.775 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.790 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:15.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:15.813 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:15.817 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 28,7% |
08:52:15.827 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 00 bf f3 6f 8f 80 25 08 4b ad 03 dd 67 |
08:52:15.837 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.876 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.890 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:15.913 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:15.914 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:15.916 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:15.916 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 0c ff f7 a2 ff 06 4b 1d 60 20 00 70 bd |
08:52:15.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.977 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:15.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:15.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:16.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:16.019 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:16.033 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:16.033 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 18 01 24 64 42 e8 e7 01 24 64 42 f7 e7 |
08:52:16.043 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.043 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.080 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.081 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.095 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:16.118 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:16.118 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:16.121 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:16.121 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 24 00 80 00 40 04 e1 00 e0 00 e1 00 e0 |
08:52:16.141 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.141 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.181 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.181 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.195 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:16.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:16.219 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:16.221 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:16.221 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 30 10 b5 02 48 ff f7 8e ff 10 bd c0 46 |
08:52:16.241 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.284 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:16.318 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:16.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:16.320 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:16.320 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 3c 24 02 00 10 01 23 02 79 06 49 07 32 |
08:52:16.340 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.380 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.380 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:16.418 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:16.418 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:16.420 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:16.420 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 48 93 40 00 22 10 b5 cc 6f 23 43 cb 67 |
08:52:16.441 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.441 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.482 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.482 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.495 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:16.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:16.521 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:16.530 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:16.530 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 54 03 68 da 63 5a 61 9a 62 10 bd c0 46 |
08:52:16.543 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.543 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.583 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.597 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:16.620 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:16.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:16.622 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:16.622 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 60 04 80 04 40 02 4a 13 6a 01 33 13 62 |
08:52:16.642 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.642 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.682 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.682 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:16.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:16.720 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:16.746 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.746 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.788 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:16.788 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 6c 70 47 c0 46 b8 01 00 10 03 68 70 b5 |
08:52:16.833 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:16.870 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:16.875 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:16.897 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.911 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:16.911 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 78 5b 68 0c 00 98 47 03 00 02 1e 00 d0 |
08:52:16.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:16.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:16.969 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:16.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:16.997 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:17.019 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.047 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:17.048 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 84 02 78 01 20 21 12 03 33 e4 b2 82 42 |
08:52:17.092 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.093 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:17.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:17.130 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:17.153 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.153 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.174 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:17.174 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 90 02 da 01 20 40 42 70 bd 1d 78 8d 42 |
08:52:17.218 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.232 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:17.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:17.256 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:17.279 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.310 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:17.310 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 9c 02 d1 5d 78 a5 42 f8 d0 01 30 02 33 |
08:52:17.354 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:17.392 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:17.392 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:17.395 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:17.395 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef a8 f1 e7 43 68 10 b5 d8 6e 03 68 9b 6e |
08:52:17.415 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.415 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.455 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:17.493 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:17.493 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:17.516 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.516 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.539 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:17.539 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef b4 98 47 10 bd 43 68 10 b5 d8 6e 03 68 |
08:52:17.583 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.598 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:17.621 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:17.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:17.630 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:17.630 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef c0 04 69 9b 6d 98 47 00 78 20 18 10 bd |
08:52:17.645 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.682 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.682 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:17.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:17.720 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:17.745 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.745 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.780 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:17.780 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef cc 03 68 10 b5 5b 68 98 47 00 78 10 bd |
08:52:17.826 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:17.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:17.867 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:17.889 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.916 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:17.916 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef d8 10 b5 0a 4c 20 00 ff f7 2f ff bf f3 |
08:52:17.961 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:17.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:17.975 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:17.998 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:17.998 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:18.001 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:18.001 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef e4 4f 8f bf f3 6f 8f 80 22 06 4b 92 03 |
08:52:18.021 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.021 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.061 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.061 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.075 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:18.098 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:18.099 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:18.121 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.121 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.159 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:18.159 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef f0 da 67 06 4a 06 49 d3 6f ff 34 0b 40 |
08:52:18.215 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.222 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:18.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:18.241 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:18.264 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.287 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:18.288 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef fc d3 67 00 23 |
08:52:18.320 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:18.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:18.358 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:18.361 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:18.381 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.390 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4300 with 256 bytes and CRC32 0x6DB7F954 |
08:52:18.393 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ee 00 01 00 43 00 00 54 f9 b7 6d |
08:52:18.433 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.447 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:18.470 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:18.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:18.472 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 30,2% |
08:52:18.472 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 00 63 76 10 bd 24 02 00 10 04 e1 00 e0 |
08:52:18.492 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.493 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.533 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.533 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:18.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:18.570 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:18.573 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:18.573 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 0c 04 80 04 40 ff ef ff ff 03 23 59 43 |
08:52:18.593 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.633 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:18.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:18.671 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:18.694 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:18.695 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 18 10 b5 89 b2 db 18 80 2a 00 d1 04 3b |
08:52:18.695 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.695 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.739 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:18.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:18.777 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:18.779 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:18.779 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 24 07 24 8c 40 8b 40 82 6a a2 43 82 62 |
08:52:18.801 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.802 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.839 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.839 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:18.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:18.876 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:18.880 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:18.880 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 82 6a 13 43 83 62 10 bd 03 23 30 b5 |
08:52:18.899 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.899 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.939 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:18.939 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:18.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:18.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:18.977 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:18.979 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:18.980 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 3c 07 25 4b 43 9d 40 9a 40 44 69 49 00 |
08:52:19.000 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.039 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:19.077 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:19.077 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:19.079 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:19.079 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 48 ac 43 44 61 44 69 22 43 42 61 30 22 |
08:52:19.100 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.140 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:19.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:19.179 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:19.191 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:19.191 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 54 8a 40 c3 6b 93 43 c3 63 c3 6b c3 63 |
08:52:19.202 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.202 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.241 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:19.279 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:19.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:19.281 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:19.281 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 60 30 bd 70 b5 83 6a 18 68 80 8a 04 0a |
08:52:19.302 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.302 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.342 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.342 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.357 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:19.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:19.380 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:19.383 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:19.383 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 6c 4c 70 88 70 ff 24 00 20 85 b2 aa 42 |
08:52:19.403 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.403 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.443 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.457 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:19.480 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:19.480 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:19.503 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.515 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:19.515 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 78 1f d8 8c 54 d9 64 bf f3 4f 8f bf f3 |
08:52:19.560 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:19.598 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:19.598 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:19.621 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.661 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:19.661 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 84 6f 8f 72 b6 1a 00 2c 32 11 78 c8 b2 |
08:52:19.706 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.719 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:19.742 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:19.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:19.745 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:19.745 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 90 01 29 10 d1 05 31 11 70 da 1d 9b 69 |
08:52:19.764 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.804 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:19.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:19.841 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:19.874 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/2/2 L_Data.ind, low priority hop count 6, tpdu 00 80 03 70 |
08:52:19.886 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.915 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:19.915 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 9c d1 7f 1c 68 8a 00 23 00 18 33 9b 18 |
08:52:19.959 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:19.960 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:19.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:19.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:19.997 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:20.020 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.035 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:20.035 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef a8 18 60 03 22 20 00 ff f7 c3 ff 00 23 |
08:52:20.079 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:20.116 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:20.120 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:20.141 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.169 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:20.169 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef b4 a3 60 62 b6 70 bd 0d 5c 01 30 6c 40 |
08:52:20.214 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.228 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:20.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:20.251 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:20.274 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.281 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:20.281 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef c0 d8 e7 70 b5 04 00 83 69 81 22 1d 68 |
08:52:20.326 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.327 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:20.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:20.371 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:20.393 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.393 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.426 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:20.426 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef cc 43 1d d9 7f 28 00 ff f7 9f ff e3 1d |
08:52:20.471 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.472 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:20.509 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:20.512 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:20.534 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.572 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:20.572 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef d8 de 7f 28 00 31 00 02 22 ff f7 aa ff |
08:52:20.617 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.617 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.631 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:20.655 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:20.655 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:20.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.695 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:20.695 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef e4 18 35 08 4b b6 00 ae 19 33 60 a3 1d |
08:52:20.739 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:20.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:20.777 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:20.800 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.800 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.826 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:20.826 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef f0 db 7f 01 22 9b 00 ed 18 04 4b 2b 60 |
08:52:20.871 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.871 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:20.910 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:20.911 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:20.932 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:20.933 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:20.978 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:20.978 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef fc 23 00 2c 33 |
08:52:21.011 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.026 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:21.049 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:21.054 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:21.076 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.076 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.112 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:21.131 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4400 with 256 bytes and CRC32 0xBB881354 |
08:52:21.132 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ee 00 01 00 44 00 00 54 13 88 bb |
08:52:21.174 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.188 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:21.211 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:21.211 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:21.234 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.234 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.215 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 31,6% |
08:52:21.239 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 00 1a 70 00 23 a3 62 70 bd fe ff 00 00 |
08:52:21.282 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.282 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.297 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:21.320 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:21.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:21.343 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.351 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:21.351 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 0c ff ff 00 00 10 21 f0 b5 43 1d db 7f |
08:52:21.395 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.395 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.409 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:21.433 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:21.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:21.449 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:21.449 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 18 82 69 99 40 12 68 04 00 10 68 87 b0 |
08:52:21.458 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.497 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.497 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:21.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:21.534 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:21.556 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.556 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.601 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:21.601 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 24 01 42 23 d0 98 00 13 00 2c 33 1b 18 |
08:52:21.646 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.660 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:21.683 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:21.683 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:21.686 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:21.687 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 30 18 68 e3 1d dd 7f 13 00 ad 00 18 33 |
08:52:21.707 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.707 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.747 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:21.784 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:21.784 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:21.808 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.808 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.811 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:21.811 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 3c 5b 19 e5 69 1e 68 6f 06 ba 4b bf 0f |
08:52:21.855 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.870 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:21.893 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:21.893 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:21.914 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.939 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:21.939 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 48 bf 00 db 19 5f 6c 1f 23 1d 40 1b 3b |
08:52:21.985 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:21.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:21.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:22.021 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:22.021 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:22.039 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:22.039 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 54 ab 40 1d 00 eb 59 00 2b 02 d0 11 60 |
08:52:22.049 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.049 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.084 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.098 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:22.122 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:22.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:22.124 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:22.124 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 60 07 b0 f0 bd 93 68 98 42 1b d8 1b 1a |
08:52:22.145 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.185 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:22.222 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:22.222 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:22.245 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.245 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.249 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:22.249 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 6c 02 2b f3 d9 27 00 2c 37 3b 78 d8 b2 |
08:52:22.293 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.293 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:22.331 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:22.331 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:22.342 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:22.342 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 78 0e 2b 01 d9 00 f0 85 fc 02 f0 00 fc |
08:52:22.354 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.394 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:22.431 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:22.433 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:22.454 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:22.454 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 84 11 00 23 00 2c 00 38 00 89 01 3b 02 |
08:52:22.454 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.454 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.500 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:22.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:22.538 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:22.541 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:22.541 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 90 6b 02 d1 02 07 03 16 03 65 03 ee 03 |
08:52:22.561 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.601 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.601 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:22.638 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:22.638 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:22.646 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:22.646 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 9c 11 04 43 04 56 04 f3 18 e1 e7 a3 69 |
08:52:22.662 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.702 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.702 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:22.739 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:22.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:22.762 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.762 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.783 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:22.783 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef a8 1a 68 63 1d d8 7f 10 23 83 40 11 68 |
08:52:22.827 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:22.865 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:22.865 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:22.867 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:22.867 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef b4 19 42 01 d1 00 f0 67 fc 00 23 93 60 |
08:52:22.889 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.929 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:22.943 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:22.966 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:22.966 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:22.990 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:22.990 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.013 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:23.013 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef c0 ff 22 a3 69 1b 68 1a 60 ca e7 a3 69 |
08:52:23.059 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.060 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.073 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:23.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:23.100 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:23.121 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.121 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.152 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:23.153 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef cc 1b 68 1a 68 63 1d d9 7f 10 23 8b 40 |
08:52:23.197 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:23.235 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:23.235 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:23.256 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.258 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:23.258 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef d8 1a 42 f1 d0 22 00 00 23 6f 32 23 64 |
08:52:23.303 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.303 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.317 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:23.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:23.341 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:23.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.404 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:23.404 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef e4 07 3a d3 71 13 80 ff 22 a3 62 01 33 |
08:52:23.448 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.448 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:23.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:23.486 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:23.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.534 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:23.534 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef f0 62 66 23 66 63 1d 02 93 db 7f 01 93 |
08:52:23.578 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:23.616 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:23.620 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:23.641 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.641 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.664 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:23.665 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef fc a3 69 01 98 |
08:52:23.698 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:23.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:23.736 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:23.759 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.759 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.815 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:23.836 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4500 with 256 bytes and CRC32 0x0892986D |
08:52:23.838 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ee 00 01 00 45 00 00 6d 98 92 08 |
08:52:23.877 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.878 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.895 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:23.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:23.915 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:23.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:23.917 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 33,1% |
08:52:23.949 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 00 1d 68 10 23 1a 00 82 40 29 68 11 42 |
08:52:23.994 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:23.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.008 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:24.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:24.031 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:24.033 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:24.033 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 0c 00 d0 15 e1 65 6e 26 6c 00 2d 3b d1 |
08:52:24.054 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.093 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.093 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.108 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:24.131 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:24.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:24.152 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.152 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.160 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:24.160 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 18 23 6e 00 2b 3e d1 00 23 a3 62 06 33 |
08:52:24.205 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:24.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:24.243 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:24.245 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:24.245 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 24 3b 70 23 6c 01 2b 00 d0 f0 e0 23 00 |
08:52:24.268 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.268 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.305 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:24.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:24.343 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:24.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.410 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:24.410 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 30 6c 33 1a 78 00 2a 00 d1 ea e0 00 22 |
08:52:24.455 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.455 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.469 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:24.493 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:24.493 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:24.516 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.516 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.533 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:24.533 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 3c 1a 70 22 00 10 21 68 32 13 88 8b 43 |
08:52:24.577 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.591 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:24.614 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:24.615 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:24.616 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:24.616 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 48 13 80 e2 6d 00 2a 03 d0 63 6c cc 2b |
08:52:24.636 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.636 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.676 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.690 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:24.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:24.714 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:24.715 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:24.716 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 54 00 d1 bc e0 21 6b 63 6b 99 42 00 db |
08:52:24.735 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.775 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.789 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:24.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:24.816 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:24.821 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:24.821 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 60 b7 e0 a1 6b e3 6b 99 42 00 db b2 e0 |
08:52:24.838 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.878 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.878 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.893 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:24.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:24.915 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:24.917 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:24.917 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 6c 23 00 20 00 21 00 6a 33 6d 30 6e 31 |
08:52:24.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.982 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:24.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:24.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:25.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:25.015 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:25.017 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:25.017 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 78 00 2a 00 d0 bb e0 04 22 1d 88 2a 43 |
08:52:25.038 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.038 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.081 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.081 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:25.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:25.115 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:25.117 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:25.118 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 84 1a 80 00 23 03 70 01 33 0b 70 35 e0 |
08:52:25.137 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.137 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.177 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.191 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:25.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:25.215 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:25.217 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:25.218 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 90 22 00 68 32 11 88 0b 43 13 80 c0 e7 |
08:52:25.238 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.238 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.278 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.278 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:25.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:25.316 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:25.318 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:25.319 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 9c 06 23 a5 62 3b 70 07 2e bf dd 2c 22 |
08:52:25.340 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.379 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:25.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:25.417 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:25.419 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:25.425 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef a8 23 6d 1b 78 93 43 90 2b 00 d0 ad e0 |
08:52:25.439 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.479 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.494 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:25.517 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:25.517 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:25.537 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:25.537 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef b4 20 68 03 68 5b 6b 98 47 b0 42 b2 db |
08:52:25.542 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.543 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.582 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.582 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:25.619 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:25.620 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:25.621 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:25.622 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef c0 23 6d 19 79 da 78 09 02 11 43 5b 79 |
08:52:25.642 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.642 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.682 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.682 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:25.719 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:25.722 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:25.745 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.746 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.786 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:25.786 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef cc 49 ba 22 68 89 b2 7f 2b 14 d9 4e 42 |
08:52:25.832 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:25.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:25.870 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:25.872 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:25.873 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef d8 4e 41 90 6b f6 b2 05 1e 04 d0 03 68 |
08:52:25.893 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.893 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.938 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:25.960 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:25.971 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:25.971 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:25.993 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:25.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.015 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:26.015 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef e4 1b 68 98 47 c5 43 ed 0f 35 43 23 68 |
08:52:26.059 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.073 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:26.097 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:26.097 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:26.120 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.120 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.126 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:26.126 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef f0 5b 6b 1b 7d 5b 07 06 d5 00 2d 04 d1 |
08:52:26.172 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.172 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:26.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:26.208 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:26.230 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.272 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:26.273 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef fc 4d 4e 46 e0 |
08:52:26.305 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:26.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:26.343 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:26.346 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:26.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.347 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4600 with 256 bytes and CRC32 0x0D50F120 |
08:52:26.366 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ee 00 01 00 46 00 00 20 f1 50 0d |
08:52:26.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:26.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:26.445 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:26.467 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.467 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.449 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 34,5% |
08:52:26.473 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 00 93 8a 99 42 f3 d1 20 20 21 6d 0b 78 |
08:52:26.517 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.532 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:26.555 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:26.558 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:26.562 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:26.562 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 0c 03 42 13 d0 a3 68 00 2b 4f d1 cc 22 |
08:52:26.581 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.581 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.620 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:26.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:26.657 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:26.660 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:26.660 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 18 a2 62 22 6c 21 6d 93 42 52 db a2 60 |
08:52:26.681 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.681 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.720 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:26.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:26.758 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:26.784 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.784 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.798 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:26.798 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 24 22 00 68 32 13 88 9b b2 e3 60 00 23 |
08:52:26.842 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.857 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:26.881 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:26.881 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:26.906 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:26.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:26.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.97->6/1/41 L_Data.ind, low priority hop count 6, tpdu 00 80 19 16 |
08:52:26.957 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:26.957 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 30 13 80 01 33 23 75 15 e0 62 68 15 78 |
08:52:26.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.97->6/1/42 L_Data.ind, low priority hop count 6, tpdu 00 80 19 16 |
08:52:27.002 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.002 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:27.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:27.039 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:27.054 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:27.054 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 3c 6b 40 83 43 e6 d1 20 6c 01 38 01 33 |
08:52:27.065 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.065 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.103 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.117 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:27.141 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:27.141 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:27.143 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:27.144 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 48 83 42 04 da ce 5c d5 5c ae 42 f8 d0 |
08:52:27.164 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.164 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.205 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:27.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:27.241 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:27.243 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:27.243 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 54 dc e7 83 42 da d1 a3 68 00 2b 2a d1 |
08:52:27.269 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.303 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.303 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.317 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:27.341 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:27.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:27.362 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.365 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:27.366 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 60 cc 33 a3 62 23 68 40 21 5b 6b 1a 7d |
08:52:27.410 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:27.448 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:27.448 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:27.470 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.494 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:27.494 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 6c 01 23 52 08 93 43 22 6d 12 78 0a 40 |
08:52:27.540 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.540 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.555 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:27.578 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:27.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:27.599 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.600 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.612 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:27.612 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 78 13 43 01 d0 00 23 a3 62 a3 6a 00 2b |
08:52:27.657 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:27.695 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:27.695 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:27.719 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.719 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.728 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:27.728 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 84 ba d0 05 23 b6 26 3b 70 f6 00 e3 1d |
08:52:27.773 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.787 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:27.810 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:27.811 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:27.812 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:27.812 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 90 df 7f a3 69 39 00 1d 68 03 22 28 00 |
08:52:27.832 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.872 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.887 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:27.910 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:27.910 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:27.912 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:27.912 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 9c ff f7 4c fe 02 9b 28 00 bf 00 18 35 |
08:52:27.931 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.932 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.972 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:27.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:27.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:28.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:28.009 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:28.012 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:28.012 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef a8 81 22 d9 7f ed 19 ff f7 31 fe 2e 60 |
08:52:28.032 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.072 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.072 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:28.110 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:28.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:28.112 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:28.112 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef b4 04 e7 00 23 22 00 a3 62 68 32 11 88 |
08:52:28.132 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.173 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.186 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:28.209 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:28.214 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:28.230 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:28.230 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef c0 40 33 0b 43 13 80 cd e7 c9 5c 62 68 |
08:52:28.250 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.290 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.290 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:28.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:28.328 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:28.350 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:28.350 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef cc d1 54 01 33 a3 e7 22 6b 63 6b 9a 42 |
08:52:28.351 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.395 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.395 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.409 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:28.432 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:28.433 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:28.439 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:28.439 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef d8 03 da a2 6b e3 6b 9a 42 05 db 22 00 |
08:52:28.483 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.520 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.520 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:28.557 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:28.557 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:28.560 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:28.560 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef e4 80 23 6a 32 11 88 0b 43 13 80 20 00 |
08:52:28.580 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.580 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.619 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:28.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:28.658 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:28.662 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:28.662 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef f0 ff f7 96 f9 82 e7 62 6c c0 2a 00 d0 |
08:52:28.682 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.682 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.722 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.722 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:28.760 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:28.760 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:28.767 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:28.767 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef fc 3f e7 1d 88 |
08:52:28.783 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.811 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:28.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:28.849 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:28.875 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.897 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:28.927 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4700 with 256 bytes and CRC32 0x352B405E |
08:52:28.928 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ee 00 01 00 47 00 00 5e 40 2b 35 |
08:52:28.968 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:28.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:28.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:29.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:29.006 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:29.008 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 35,9% |
08:52:29.009 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 00 b0 3a 2a 43 1a 80 01 23 0b 4e 03 70 |
08:52:29.028 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.029 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.068 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:29.106 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:29.106 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:29.130 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.164 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:29.164 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 0c 0b 70 be e7 23 00 6f 33 1a 78 00 2a |
08:52:29.208 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.226 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:29.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:29.246 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:29.247 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:29.247 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 18 02 d0 00 22 1a 70 6d e7 22 00 80 23 |
08:52:29.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.268 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.307 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:29.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:29.345 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:29.368 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.368 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.370 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:29.370 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 24 68 32 11 88 0b 43 13 80 66 e7 c0 46 |
08:52:29.415 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.415 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:29.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:29.453 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:29.475 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.502 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:29.503 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 30 8c 71 00 00 e8 13 00 00 88 3c 00 00 |
08:52:29.547 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:29.588 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:29.588 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:29.609 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.609 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.647 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:29.647 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 3c 01 9b a8 68 9a 00 2b 00 2c 33 9b 18 |
08:52:29.692 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.707 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:29.732 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:29.732 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:29.756 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.777 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:29.777 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 48 e2 1d d1 7f 2a 00 1b 68 8e 00 18 32 |
08:52:29.822 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:29.859 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:29.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:29.861 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:29.861 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 54 92 19 83 42 1a d2 c3 1a 02 20 01 26 |
08:52:29.881 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.921 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.921 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.936 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:29.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:29.959 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:29.985 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:29.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:29.986 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:29.986 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 60 1b 18 68 60 6e 60 ab 60 8f 23 db 00 |
08:52:30.033 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.047 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:30.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:30.071 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:30.094 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.107 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:30.107 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 6c 13 60 28 00 03 22 ff f7 e1 fd 81 22 |
08:52:30.152 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.152 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:30.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:30.194 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:30.202 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:30.202 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 78 28 00 01 99 ff f7 ca fd 04 23 3b 70 |
08:52:30.217 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.217 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.257 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.271 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:30.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:30.299 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:30.321 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.324 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:30.324 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 84 00 23 66 65 63 64 a3 65 e6 65 97 e6 |
08:52:30.369 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.382 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:30.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:30.407 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:30.410 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:30.410 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 90 16 68 80 19 e1 e7 01 21 e5 1d e8 7f |
08:52:30.430 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.471 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.484 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:30.507 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:30.507 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:30.529 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.563 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:30.563 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 9c a3 69 81 40 1b 68 1a 68 0a 40 51 1e |
08:52:30.607 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:30.644 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:30.645 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:30.666 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.667 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.687 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:30.687 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef a8 8a 41 04 a9 d2 b2 ca 70 ca 78 03 31 |
08:52:30.734 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.734 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.745 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:30.769 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:30.769 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:30.770 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:30.771 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef b4 00 2a 27 d0 18 33 80 00 1b 18 1b 68 |
08:52:30.791 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.791 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.831 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:30.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:30.868 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:30.870 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:30.870 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef c0 05 93 a3 6d 05 9a 18 00 44 30 90 42 |
08:52:30.890 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.890 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.930 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:30.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:30.968 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:30.967 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:30.969 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:30.969 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef cc 7a da 68 33 a3 65 80 23 5b 00 9c 46 |
08:52:30.989 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:30.989 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.029 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.029 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:31.067 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:31.067 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:31.069 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:31.069 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef d8 05 9a a3 6d 10 00 62 6d 56 00 01 96 |
08:52:31.090 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.130 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:31.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:31.172 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:31.189 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:31.189 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef e4 1e 00 44 36 86 42 5c da 62 45 11 dc |
08:52:31.199 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.236 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:31.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:31.274 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:31.287 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:31.287 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef f0 66 6c 68 33 32 43 62 64 e2 6d a3 65 |
08:52:31.298 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.298 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.336 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.337 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:31.374 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:31.375 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:31.377 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:31.378 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef fc 56 42 72 41 |
08:52:31.397 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.397 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.426 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.426 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.441 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:31.464 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:31.467 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:31.474 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:31.475 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4800 with 256 bytes and CRC32 0xAC17E81F |
08:52:31.475 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ee 00 01 00 48 00 00 1f e8 17 ac |
08:52:31.489 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.524 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.539 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:31.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:31.563 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:31.564 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 37,4% |
08:52:31.565 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 00 01 9b e2 65 63 65 e7 e7 62 1d d2 7f |
08:52:31.585 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.625 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.640 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:31.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:31.662 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:31.665 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:31.665 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 0c 2c 33 92 00 9b 18 d4 e7 05 9b 01 9b |
08:52:31.686 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.686 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.726 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:31.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:31.767 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:31.782 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:31.782 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 18 63 65 0b 78 00 2b 5f d0 63 6c 26 6c |
08:52:31.791 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.833 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:31.867 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:31.867 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:31.868 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:31.868 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 24 da b2 62 64 00 2e 08 d1 9b 07 06 d0 |
08:52:31.888 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.928 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.928 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:31.943 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:31.966 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:31.966 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:31.989 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:31.989 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.028 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:32.028 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 30 22 00 80 23 68 32 11 88 5b 00 0b 43 |
08:52:32.072 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.072 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:32.110 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:32.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:32.113 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:32.131 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 3c 13 80 20 68 03 68 5b 6b 98 47 86 42 |
08:52:32.134 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.175 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.175 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:32.213 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:32.213 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:32.236 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.253 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:32.253 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 48 43 da 23 6c 22 6d 61 6c 58 1c 20 64 |
08:52:32.298 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.298 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:32.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:32.336 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:32.359 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.359 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.375 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:32.375 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 54 d1 54 63 6e 62 6c 53 40 63 66 e3 6d |
08:52:32.420 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.434 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:32.457 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:32.457 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:32.481 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.481 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.506 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:32.506 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 60 00 2b 05 d1 21 00 08 22 68 31 08 88 |
08:52:32.551 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:32.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:32.590 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:32.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.653 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:32.654 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 6c 02 43 0a 80 22 6e 13 40 23 66 03 23 |
08:52:32.698 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:32.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:32.736 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:32.758 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.767 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:32.767 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 78 3b 70 a3 69 e9 7f 1d 68 8a 00 2b 00 |
08:52:32.813 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.825 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:32.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:32.848 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:32.872 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.910 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:32.910 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 84 18 33 9b 18 9a 22 52 00 1a 60 34 3a |
08:52:32.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:32.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:32.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:32.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:32.992 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:33.014 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.037 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:33.037 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 90 28 00 ff 3a ff f7 50 fd 63 1d 81 22 |
08:52:33.083 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.098 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:33.121 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:33.121 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:33.144 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.180 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:33.180 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 9c 28 00 d9 7f ff f7 38 fd 0c e6 05 9e |
08:52:33.225 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.225 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:33.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:33.263 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:33.286 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.297 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:33.297 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef a8 21 33 b3 42 b3 da 80 23 5b 00 9a 42 |
08:52:33.344 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.344 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:33.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:33.379 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:33.382 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:33.382 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef b4 af dc 22 00 68 32 16 88 fc 3b 33 43 |
08:52:33.402 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.442 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:33.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:33.479 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:33.502 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.534 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:33.534 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef c0 13 80 a8 e7 22 00 04 23 68 32 10 88 |
08:52:33.580 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.580 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:33.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:33.618 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:33.621 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:33.634 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef cc 03 43 13 80 a3 e7 22 00 20 23 68 32 |
08:52:33.642 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.642 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.683 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.683 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.695 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:33.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:33.719 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:33.722 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:33.722 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef d8 11 88 0b 43 13 80 be e7 82 23 05 9a |
08:52:33.742 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.782 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:33.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:33.820 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:33.823 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:33.823 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef e4 db 00 9a 42 00 dc e9 e5 22 00 01 23 |
08:52:33.842 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.882 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:33.920 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:33.924 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:33.939 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:33.939 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef f0 68 32 11 88 0b 43 13 80 e2 e5 a3 69 |
08:52:33.948 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:33.989 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:33.989 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.001 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:34.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:34.024 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:34.027 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:34.027 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef fc 1d 68 63 1d |
08:52:34.047 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.047 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.076 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.076 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:34.114 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:34.114 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:34.116 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:34.117 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4900 with 256 bytes and CRC32 0xEB715BEA |
08:52:34.117 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ee 00 01 00 49 00 00 ea 5b 71 eb |
08:52:34.136 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.173 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.186 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:34.209 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:34.214 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:34.221 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 38,8% |
08:52:34.222 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 00 db 7f 2a 68 01 93 10 23 01 99 16 00 |
08:52:34.235 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.235 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.276 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.290 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:34.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:34.313 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:34.316 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:34.316 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 0c 8b 40 1e 40 1a 42 03 d0 00 23 a3 62 |
08:52:34.335 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.375 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.389 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:34.412 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:34.412 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:34.416 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:34.416 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 18 02 23 7a e1 2a 00 68 21 a6 64 a3 1d |
08:52:34.435 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.435 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.475 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:34.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:34.514 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:34.515 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:34.515 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 24 db 7f 18 32 9b 00 d3 18 19 60 e3 1d |
08:52:34.535 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.578 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.590 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:34.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:34.618 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:34.633 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:34.633 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 30 d9 7f 28 00 8b 00 d2 18 8b 23 13 60 |
08:52:34.644 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.644 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.681 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.681 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.695 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:34.719 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:34.719 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:34.740 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.772 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:34.772 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 3c 03 22 ff f7 fb fc 81 22 28 00 01 99 |
08:52:34.817 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.817 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.830 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:34.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:34.854 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:34.877 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.877 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.913 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:34.913 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 48 ff f7 e4 fc 23 00 6a 33 26 64 1e 80 |
08:52:34.958 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:34.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:34.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:34.995 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:34.996 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:35.019 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.040 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:35.040 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 54 07 23 3b 70 b2 e5 65 1d eb 7f 81 22 |
08:52:35.085 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:35.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:35.123 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:35.145 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.183 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:35.184 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 60 01 93 a3 69 01 99 1e 68 30 00 ff f7 |
08:52:35.228 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.228 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:35.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:35.266 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:35.288 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.295 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:35.295 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 6c d3 fc 10 23 01 99 32 68 8b 40 1a 42 |
08:52:35.341 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:35.377 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:35.384 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:35.405 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.416 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:35.416 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 78 ce d1 22 6b 63 6b 9a 42 03 da a2 6b |
08:52:35.460 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.460 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:35.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:35.499 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:35.505 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:35.506 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 84 e3 6b 9a 42 08 db 22 00 80 23 6a 32 |
08:52:35.521 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.521 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.561 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:35.599 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:35.599 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:35.623 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.623 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.652 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:35.652 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 90 11 88 20 00 0b 43 13 80 ff f7 42 f8 |
08:52:35.697 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:35.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:35.735 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:35.738 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:35.738 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 9c e1 6c 00 29 00 d1 f2 e1 0f 22 4b 79 |
08:52:35.758 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.799 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:35.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:35.836 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:35.838 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:35.838 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef a8 13 40 08 33 a3 64 23 00 6e 33 1b 78 |
08:52:35.859 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.899 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.899 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.913 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:35.936 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:35.936 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:35.938 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:35.938 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef b4 00 2b 0b d0 20 23 0a 78 1a 42 07 d0 |
08:52:35.958 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:35.998 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:35.998 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.013 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:36.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:36.042 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:36.047 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:36.047 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef c0 9a 43 0a 70 a2 6c e1 6c 01 3a 88 5c |
08:52:36.064 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.065 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.104 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.119 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:36.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:36.142 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:36.144 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:36.144 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef cc 43 40 8b 54 24 22 e3 6c 1b 78 13 40 |
08:52:36.165 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.205 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:36.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:36.243 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:36.266 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.291 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:36.291 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef d8 93 42 22 d1 d0 23 5b 00 05 93 a3 69 |
08:52:36.335 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:36.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:36.373 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:36.396 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.396 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.413 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:36.413 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef e4 05 99 1e 68 a3 1d 32 00 db 7f 18 32 |
08:52:36.458 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.472 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:36.496 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:36.496 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:36.513 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:36.513 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef f0 9b 00 d3 18 19 60 e3 1d d9 7f 05 98 |
08:52:36.522 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.559 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.573 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:36.596 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:36.597 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:36.600 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:36.600 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef fc 8b 00 d3 18 |
08:52:36.620 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.648 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.649 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:36.686 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:36.689 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:36.693 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:36.694 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4A00 with 256 bytes and CRC32 0x623CDE6C |
08:52:36.695 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ee 00 01 00 4a 00 00 6c de 3c 62 |
08:52:36.712 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.749 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:36.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:36.786 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:36.787 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 40,2% |
08:52:36.788 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 00 23 30 18 60 03 22 30 00 ff f7 96 fc |
08:52:36.807 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.807 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.847 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.847 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.861 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:36.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:36.885 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:36.888 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:36.888 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 0c 81 22 30 00 e9 7f ff f7 7f fc 22 00 |
08:52:36.907 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.907 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.947 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:36.947 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:36.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:36.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:36.984 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:36.986 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:36.986 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 18 00 23 6a 32 23 64 13 80 98 e7 68 23 |
08:52:37.006 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.046 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.060 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:37.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:37.084 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:37.096 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:37.096 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 24 dc e7 10 20 63 1d da 7f a3 69 90 40 |
08:52:37.107 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.149 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.149 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.161 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:37.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:37.188 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:37.194 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:37.194 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 30 1b 68 19 00 1d 68 18 31 05 42 1b d0 |
08:52:37.210 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.210 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.250 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:37.287 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:37.288 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:37.290 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:37.290 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 3c 92 00 2c 33 9b 18 a2 1d d2 7f 18 68 |
08:52:37.310 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.350 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:37.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:37.388 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:37.389 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:37.390 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 48 92 00 8a 18 11 68 07 39 81 42 02 d9 |
08:52:37.409 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.449 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.451 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.464 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:37.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:37.487 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:37.494 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:37.494 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 54 a1 6a 00 29 07 d0 19 68 13 68 10 3b |
08:52:37.509 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.509 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.549 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:37.586 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:37.586 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:37.608 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.632 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:37.632 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 60 8b 42 05 d9 a3 6a 00 2b 02 d0 ca 4b |
08:52:37.677 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:37.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:37.714 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:37.736 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.738 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:37.738 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 6c 13 60 53 e7 08 23 70 e7 1a 68 e3 1d |
08:52:37.783 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:37.820 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:37.820 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:37.843 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.875 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:37.875 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 78 d9 7f 01 23 8b 40 1a 42 07 d0 08 23 |
08:52:37.920 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.920 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:37.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:37.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:37.960 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:37.982 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:37.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.024 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:38.024 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 84 22 00 3b 70 6a 32 11 88 18 33 0b 43 |
08:52:38.069 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:38.106 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:38.106 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:38.116 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:38.116 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 90 13 80 a3 6a 00 2b 32 d0 a3 6a 80 21 |
08:52:38.130 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.171 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.171 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:38.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:38.211 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:38.245 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:38.245 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 9c 63 64 01 23 49 00 62 6c ff 2b 30 dd |
08:52:38.251 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.289 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:38.327 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:38.334 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:38.356 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.381 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:38.382 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef a8 01 23 63 65 08 33 3b 70 68 23 80 22 |
08:52:38.426 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.426 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.441 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:38.464 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:38.468 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:38.490 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.490 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.509 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:38.509 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef b4 61 6c 05 93 52 00 63 6d 5d 00 65 65 |
08:52:38.553 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.567 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:38.591 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:38.591 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:38.613 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.652 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:38.652 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef c0 0b 42 01 d0 93 42 26 dd a2 69 80 26 |
08:52:38.697 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:38.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:38.735 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:38.757 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.757 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.803 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:38.804 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef cc 10 68 62 1d d1 7f 02 00 05 9b 18 32 |
08:52:38.848 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.862 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:38.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:38.886 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:38.907 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.937 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:38.938 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef d8 b6 00 01 92 68 2b 1e dd 0a 23 81 22 |
08:52:38.982 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:38.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:38.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:39.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:39.020 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:39.042 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.079 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:39.079 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef e4 3b 70 ff f7 15 fc b5 42 1e dc a3 1d |
08:52:39.123 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.137 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:39.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:39.162 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:39.184 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.219 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:39.220 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef f0 db 7f 05 9a 01 99 9b 00 23 3a cb 18 |
08:52:39.265 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:39.302 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:39.303 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:39.318 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:39.318 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef fc 1c e0 23 6c |
08:52:39.327 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.327 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.354 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:39.392 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:39.392 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:39.394 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:39.395 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4B00 with 256 bytes and CRC32 0xAB4A5557 |
08:52:39.396 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ee 00 01 00 4b 00 00 57 55 4a ab |
08:52:39.415 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.415 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.451 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.451 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:39.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:39.494 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:39.501 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 41,7% |
08:52:39.503 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 00 e2 6c 59 1c 21 64 d3 5c c7 e7 1a 42 |
08:52:39.517 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.517 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.555 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.555 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:39.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:39.593 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:39.598 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:39.598 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 0c 01 d0 4a 40 62 64 5b 00 c5 e7 05 9b |
08:52:39.616 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.616 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.656 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:39.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:39.693 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:39.695 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:39.695 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 18 68 33 05 93 cd e7 80 22 ff f7 f8 fb |
08:52:39.716 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.755 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.755 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.769 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:39.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:39.798 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:39.800 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:39.800 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 24 b5 42 e2 dd 0b 23 3b 70 a3 1d db 7f |
08:52:39.820 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.820 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.860 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.874 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:39.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:39.899 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:39.907 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:39.907 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 30 01 9a 9b 00 d3 18 97 4a 1a 60 a3 69 |
08:52:39.926 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.926 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.965 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:39.966 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:39.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:40.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:40.008 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:40.011 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:40.011 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 3c e2 1d 1b 68 d2 7f 05 99 18 33 92 00 |
08:52:40.030 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.070 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:40.108 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:40.112 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:40.118 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:40.118 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 48 9b 18 19 60 b8 e4 63 1d d9 7f a3 69 |
08:52:40.133 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.133 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.175 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.176 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.187 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:40.211 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:40.211 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:40.213 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:40.213 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 54 1d 68 10 23 8b 40 2a 68 1a 42 79 d0 |
08:52:40.234 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.234 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.274 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:40.311 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:40.311 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:40.313 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:40.313 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 60 8b 00 29 00 2c 31 c9 18 0e 68 68 21 |
08:52:40.333 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.373 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.390 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:40.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:40.411 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:40.433 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.434 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.469 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:40.469 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 6c 30 00 01 f0 85 ff 3d 29 00 d8 a3 e4 |
08:52:40.513 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.528 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:40.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:40.551 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:40.574 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.574 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.609 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:40.609 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 78 a1 1d cb 7f 18 35 9b 00 ed 18 2b 68 |
08:52:40.653 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.654 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.667 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:40.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:40.691 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:40.694 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:40.694 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 84 07 3b b3 42 62 d9 23 00 01 22 20 00 |
08:52:40.714 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.754 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.755 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.769 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:40.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:40.792 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:40.815 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.849 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:40.850 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 90 6f 33 1a 70 40 23 6a 30 05 88 2b 43 |
08:52:40.896 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.910 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:40.933 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:40.933 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:40.951 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:40.951 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 9c 03 80 23 00 00 20 68 33 18 80 ff 23 |
08:52:40.960 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.960 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:40.997 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:40.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:41.034 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:41.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:41.057 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.057 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.089 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:41.089 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef a8 63 66 a3 6a 22 66 e2 65 83 42 30 d0 |
08:52:41.133 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.133 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.147 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:41.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:41.170 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:41.172 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:41.172 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef b4 a0 62 a3 69 1b 68 02 93 18 33 03 93 |
08:52:41.193 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.193 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.233 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:41.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:41.270 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:41.286 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:41.286 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef c0 cd 7f 68 21 ad 00 5d 19 28 68 21 30 |
08:52:41.295 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.333 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:41.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:41.371 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:41.394 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.407 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:41.408 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef cc 80 1b 01 f0 cf fe 63 6d 32 00 01 30 |
08:52:41.457 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.457 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:41.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:41.496 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:41.517 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.517 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.538 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:41.538 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef d8 03 41 0a 20 68 3a a2 65 62 6c 59 1e |
08:52:41.583 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.597 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:41.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:41.622 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:41.623 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:41.624 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef e4 0a 40 63 65 01 92 62 64 5b 10 00 2b |
08:52:41.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.36->13/3/0 L_Data.ind, low priority hop count 6, tpdu 00 80 00 00 |
08:52:41.665 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.665 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.708 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.708 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:41.743 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:41.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:41.768 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.768 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.803 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:41.803 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef f0 23 d1 e3 1d d9 7f 68 23 43 43 03 98 |
08:52:41.849 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.863 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:41.887 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:41.887 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:41.892 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:41.893 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef fc 8a 00 9b 19 |
08:52:41.908 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:41.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:41.975 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:41.975 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:41.998 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:41.999 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.022 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:42.053 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4C00 with 256 bytes and CRC32 0xA0B68D5C |
08:52:42.057 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ee 00 01 00 4c 00 00 5c 8d b6 a0 |
08:52:42.098 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.098 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:42.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:42.137 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:42.139 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 43,1% |
08:52:42.140 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 00 82 18 13 60 02 98 03 22 ff f7 96 fb |
08:52:42.162 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.199 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.213 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:42.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:42.244 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:42.255 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:42.255 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 0c 61 4b 2b 60 04 23 3b 70 2c e4 20 00 |
08:52:42.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.305 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:42.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:42.343 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:42.346 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:42.346 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 18 6e 30 02 70 22 6c 01 3a 22 64 22 6c |
08:52:42.369 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.423 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:42.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:42.443 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:42.445 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:42.445 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 24 9a 42 c6 dd e2 6c d0 5c 22 6d d0 54 |
08:52:42.465 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.505 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.519 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:42.543 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:42.547 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:42.564 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:42.564 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 30 62 6e 01 33 42 40 62 66 f3 e7 01 9a |
08:52:42.572 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.623 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:42.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:42.647 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:42.648 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:42.649 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 3c 01 38 13 42 04 d0 e1 6d 0a 00 51 42 |
08:52:42.669 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.708 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.708 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.723 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:42.746 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:42.749 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:42.758 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:42.758 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 48 51 41 e1 65 5b 10 ce e7 09 23 80 e6 |
08:52:42.771 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.811 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:42.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:42.849 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:42.851 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:42.851 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 54 0b 23 80 22 28 00 3b 70 ff f7 5a fb |
08:52:42.872 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.912 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:42.926 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:42.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:42.949 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:42.968 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:42.968 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 60 a3 69 21 6c 1a 68 a3 6c 18 32 99 42 |
08:52:42.974 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:42.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.013 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.013 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.027 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:43.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:43.055 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:43.065 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:43.065 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 6c 02 da a3 6a 00 2b 0a d0 0c 23 3b 70 |
08:52:43.076 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.077 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.118 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.118 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:43.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:43.164 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:43.183 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:43.183 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 78 39 33 05 93 e3 1d db 7f 05 99 9b 00 |
08:52:43.189 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.227 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:43.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:43.265 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:43.287 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:43.287 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 84 d2 18 11 60 1a e4 9c 23 5b 00 05 93 |
08:52:43.288 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.332 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:43.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:43.372 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:43.373 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:43.374 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 90 31 3b ff 3b 3b 70 a3 1d db 7f 05 99 |
08:52:43.393 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.433 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.448 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:43.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:43.473 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:43.496 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.496 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.527 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:43.527 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 9c 9b 00 23 39 d3 18 19 60 ea e7 e2 1d |
08:52:43.572 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.586 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:43.610 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:43.610 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:43.632 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.652 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:43.652 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef a8 d5 7f a3 6a a2 69 16 68 00 2b 0c d0 |
08:52:43.698 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.710 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:43.734 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:43.744 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:43.766 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.766 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.786 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:43.786 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef b4 00 23 a3 62 06 33 3b 70 36 4b 05 93 |
08:52:43.831 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:43.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:43.877 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:43.898 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/0 L_Data.ind, low priority hop count 6, tpdu 00 80 03 98 |
08:52:43.916 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.916 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:43.944 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:43.944 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef c0 05 9b 18 36 ad 00 70 19 03 60 ff f7 |
08:52:43.989 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:43.989 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.003 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:44.026 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:44.026 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:44.049 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.049 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.053 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:44.068 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef cc f9 fb 23 00 01 22 6c 33 1a 70 31 4b |
08:52:44.113 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:44.151 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:44.151 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:44.174 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.201 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:44.201 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef d8 29 00 05 93 0d 23 30 00 3b 70 ff f7 |
08:52:44.245 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.245 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:44.283 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:44.286 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:44.307 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.343 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:44.343 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef e4 29 fb 23 00 6e 33 1b 78 00 2b e7 d0 |
08:52:44.388 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:44.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:44.425 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:44.448 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.448 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.454 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:44.454 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef f0 23 00 6d 33 1b 78 00 2b 03 d0 a3 6b |
08:52:44.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/2/2 L_Data.ind, low priority hop count 6, tpdu 00 80 03 66 |
08:52:44.515 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.515 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:44.552 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:44.552 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:44.555 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:44.555 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef fc 01 33 a3 63 |
08:52:44.575 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.603 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:44.642 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:44.642 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:44.663 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.693 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:44.712 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4D00 with 256 bytes and CRC32 0x72C3CC69 |
08:52:44.749 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ee 00 01 00 4d 00 00 69 cc c3 72 |
08:52:44.788 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.788 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.803 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:44.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:44.826 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:44.851 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.851 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.831 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 44,6% |
08:52:44.861 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 de e7 23 6b 01 33 23 63 da e7 0e 23 |
08:52:44.905 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.919 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:44.942 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:44.942 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:44.964 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:44.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:44.988 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:44.988 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c 3b 70 a3 69 81 22 1d 68 63 1d 28 00 |
08:52:45.032 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.047 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:45.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:45.070 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:45.072 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:45.072 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 18 d9 7f ff f7 fb fa e3 1d db 7f 18 35 |
08:52:45.092 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.131 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:45.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:45.169 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:45.174 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:45.174 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 24 9b 00 ed 18 1d 4b 2b 60 ff f7 c8 fb |
08:52:45.193 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.193 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.233 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:45.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:45.270 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:45.272 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:45.272 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 30 a3 69 1d 68 63 1d d9 7f 10 23 2a 68 |
08:52:45.292 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.332 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:45.370 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:45.370 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:45.371 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:45.371 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 3c 8b 40 10 00 18 40 1a 42 00 d0 e7 e5 |
08:52:45.392 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.392 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.432 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.432 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:45.469 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:45.469 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:45.471 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:45.471 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 48 23 00 01 22 6e 33 1a 70 22 00 02 3b |
08:52:45.492 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.531 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.531 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:45.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:45.571 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:45.574 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:45.574 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 54 18 70 08 23 6a 32 10 88 03 43 13 80 |
08:52:45.594 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.633 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:45.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:45.671 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:45.673 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:45.673 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 60 06 23 3b 70 e3 1d de 7f 2b 00 b2 00 |
08:52:45.693 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.734 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.734 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:45.770 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:45.770 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:45.772 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:45.772 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 6c 18 33 9b 18 09 4a 28 00 1a 60 81 22 |
08:52:45.792 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.798 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.832 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:45.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:45.872 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:45.874 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:45.874 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 78 ff f7 cc fa 03 22 31 00 28 00 ff f7 |
08:52:45.894 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.934 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:45.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:45.971 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:45.972 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:45.974 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:45.974 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 84 d9 fa ff f7 9b fb 20 00 ff f7 19 fb |
08:52:45.993 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:45.993 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.036 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.036 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.047 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:46.071 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:46.071 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:46.094 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.130 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:46.130 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 90 ff f7 96 fb ff ff 00 00 e8 13 00 00 |
08:52:46.176 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.176 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:46.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:46.212 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:46.235 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.235 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.284 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:46.284 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 9c af 05 00 00 9a 06 00 00 10 b5 02 4b |
08:52:46.329 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:46.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:46.366 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:46.387 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:46.387 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef a8 d8 6a ff f7 31 fb 10 bd b8 01 00 10 |
08:52:46.393 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.393 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.433 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:46.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:46.470 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:46.477 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:46.478 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef b4 80 23 01 38 5b 04 98 42 0d d2 c0 21 |
08:52:46.496 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.496 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.534 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:46.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:46.572 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:46.595 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.629 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:46.629 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef c0 06 4a 09 06 50 60 06 48 03 6a 1b 02 |
08:52:46.673 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.673 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:46.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:46.712 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:46.735 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.762 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:46.762 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef cc 1b 0a 0b 43 03 62 00 23 93 60 07 33 |
08:52:46.806 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.820 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:46.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:46.844 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:46.866 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.867 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.907 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:46.907 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef d8 13 60 70 47 10 e0 00 e0 00 ed 00 e0 |
08:52:46.951 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:46.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:46.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:46.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:46.988 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:46.993 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:46.993 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef e4 80 20 70 b5 40 04 ff f7 e3 ff 00 f0 |
08:52:47.013 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.053 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.053 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:47.091 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:47.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:47.101 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:47.101 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef f0 49 fb 1f 21 01 22 0b 4b 80 24 1b 68 |
08:52:47.115 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.155 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:47.192 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:47.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:47.215 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.216 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:47.216 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef fc 0a 4d 19 40 |
08:52:47.250 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:47.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:47.289 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:47.312 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.312 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.334 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:47.369 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4E00 with 256 bytes and CRC32 0x10337136 |
08:52:47.369 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ee 00 01 00 4e 00 00 36 71 33 10 |
08:52:47.409 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.409 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.423 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:47.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:47.447 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:47.449 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 46,0% |
08:52:47.450 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 00 8a 40 5b 06 09 49 9b 0f 9b 00 c9 18 |
08:52:47.470 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.509 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:47.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:47.560 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:47.582 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.582 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.621 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:47.621 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 0c 49 6c e4 03 90 00 ab 68 23 40 5e 42 |
08:52:47.665 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.681 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:47.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:47.703 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:47.726 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.758 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:47.759 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 18 73 41 5b 42 13 40 43 50 f7 e7 c0 46 |
08:52:47.804 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:47.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:47.843 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:47.861 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:47.861 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 24 d4 00 00 10 10 e0 00 e0 8c 71 00 00 |
08:52:47.870 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.870 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.908 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.909 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:47.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:47.946 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:47.946 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:47.956 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:47.956 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 30 f0 b5 43 06 85 b0 9b 0f 01 93 7d 4b |
08:52:47.976 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:47.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.011 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.025 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:48.048 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:48.049 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:48.051 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:48.051 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 3c f0 25 03 93 01 9b 03 9a 9b 00 d3 18 |
08:52:48.077 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.077 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.114 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.114 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:48.151 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:48.151 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:48.154 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:48.154 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 48 5a 6c 1f 23 03 40 02 93 01 23 1e 00 |
08:52:48.175 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.176 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.215 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:48.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:48.261 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:48.266 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:48.266 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 54 9c 46 02 9b c0 27 9e 40 80 23 0c 05 |
08:52:48.286 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.327 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.327 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:48.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:48.368 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:48.390 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.391 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.393 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:48.393 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 60 2d 02 0d 40 24 0d 89 14 b6 b2 ff 01 |
08:52:48.438 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.438 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.453 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:48.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:48.475 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:48.478 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:48.478 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 6c 1b 02 00 29 11 d1 61 46 bd 42 1d d1 |
08:52:48.498 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.538 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:48.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:48.576 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:48.578 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:48.578 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 78 d5 58 35 43 d5 50 c3 05 00 d5 ca e0 |
08:52:48.597 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.598 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.637 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.637 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:48.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:48.675 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:48.677 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:48.677 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 84 43 12 1f 22 1d 00 15 40 a9 42 00 d0 |
08:52:48.697 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.738 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.738 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:48.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:48.777 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:48.778 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:48.779 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 90 c8 e0 00 23 45 e0 09 b2 bd 42 0b d1 |
08:52:48.799 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.839 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.839 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:48.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:48.878 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:48.880 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:48.880 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 9c d5 58 35 43 d5 50 0c 29 00 d0 70 e0 |
08:52:48.901 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.901 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.940 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:48.940 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:48.954 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:48.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:48.978 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:49.000 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.023 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:49.023 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef a8 62 4b 98 42 5d d1 62 4b 00 22 77 e0 |
08:52:49.068 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:49.106 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:49.106 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:49.129 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.129 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.139 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:49.139 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef b4 e0 27 ff 01 bd 42 04 d1 d1 58 31 43 |
08:52:49.185 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:49.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:49.227 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:49.248 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.282 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:49.282 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef c0 d1 50 06 21 db e7 d7 58 b7 43 d7 50 |
08:52:49.326 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.326 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:49.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:49.365 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:49.388 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.401 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:49.401 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef cc 80 23 9b 01 9d 42 36 d1 59 4b 98 42 |
08:52:49.446 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.460 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:49.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:49.483 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:49.506 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.512 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:49.512 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef d8 09 d1 00 22 07 21 58 4b 1a 60 58 4b |
08:52:49.556 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.556 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:49.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:49.602 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:49.618 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:49.618 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef e4 5a 04 d2 0e 91 42 48 d1 5b e0 56 4b |
08:52:49.628 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.628 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.664 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.664 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:49.702 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:49.702 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:49.719 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:49.719 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef f0 98 42 05 d1 01 22 52 4b 07 21 1a 60 |
08:52:49.727 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.727 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.764 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.778 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:49.801 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:49.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:49.813 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:49.814 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef fc 53 4b f1 e7 |
08:52:49.823 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.851 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:49.890 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:49.891 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:49.904 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:49.913 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.913 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.908 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4F00 with 256 bytes and CRC32 0xB8864CA0 |
08:52:49.927 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ee 00 01 00 4f 00 00 a0 4c 86 b8 |
08:52:49.969 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:49.969 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:49.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:50.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:50.007 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:50.009 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 47,4% |
08:52:50.010 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 00 53 4b 98 42 05 d1 00 22 52 4b 07 21 |
08:52:50.030 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.069 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:50.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:50.107 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:50.130 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:50.130 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 0c 1a 60 52 4b e8 e7 52 4b 07 21 98 42 |
08:52:50.131 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.178 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:50.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:50.213 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:50.215 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:50.215 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 18 b1 d1 4e 4b 01 22 1a 60 01 23 0c 22 |
08:52:50.236 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.276 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.290 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:50.314 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:50.317 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:50.319 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:50.319 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 24 01 98 03 99 42 43 02 98 64 31 12 18 |
08:52:50.339 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.339 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.379 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.380 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.393 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:50.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:50.417 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:50.439 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.472 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:50.472 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 30 52 00 52 5a 4a 49 23 43 52 18 92 00 |
08:52:50.518 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.531 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:50.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:50.557 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:50.579 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.587 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:50.587 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 3c 13 60 05 b0 f0 bd c0 23 9b 01 9d 42 |
08:52:50.632 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:50.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:50.675 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:50.698 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.714 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:50.714 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 48 6a d0 0f 29 a9 d1 00 23 44 4a 9d 00 |
08:52:50.759 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.760 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:50.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:50.797 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:50.799 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:50.799 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 54 ad 58 a8 42 02 d1 43 4a 13 60 8e e7 |
08:52:50.819 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.866 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:50.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:50.901 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:50.908 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:50.908 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 60 01 33 04 2b f5 d1 ff f7 3d ff 40 4b |
08:52:50.923 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.963 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:50.963 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:50.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:51.001 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:51.001 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:51.004 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:51.005 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 6c 98 42 00 d0 85 e7 01 22 30 4b 1a 60 |
08:52:51.023 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.062 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.077 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:51.105 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:51.105 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:51.112 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:51.112 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 78 80 23 1c 43 3c 4b 1b 03 db 0e 8b 42 |
08:52:51.128 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.168 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.182 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:51.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:51.212 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:51.222 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:51.222 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 84 ef d1 03 23 cb e7 0d 29 0d d1 39 4b |
08:52:51.237 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.275 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.275 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:51.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:51.313 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:51.318 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:51.318 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 90 98 42 01 d1 38 4b 8b e7 38 4b 98 42 |
08:52:51.335 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.377 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.377 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:51.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:51.413 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:51.415 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:51.415 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 9c 00 d0 6e e7 01 22 35 4b 1a 60 02 23 |
08:52:51.435 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.435 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.475 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:51.512 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:51.512 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:51.515 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:51.515 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef a8 bb e7 0e 29 1d d1 34 4b 98 42 01 d1 |
08:52:51.536 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.576 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:51.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:51.613 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:51.616 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:51.616 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef b4 33 4b 7b e7 33 4b 98 42 01 d1 31 4b |
08:52:51.636 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.636 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.676 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.690 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:51.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:51.714 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:51.737 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.737 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.749 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:51.750 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef c0 ac e7 32 4b 98 42 02 d1 02 22 2e 4b |
08:52:51.794 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.794 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.808 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:51.831 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:51.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:51.833 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:51.833 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef cc ea e7 30 4b 98 42 01 d1 2f 4b 6b e7 |
08:52:51.853 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.893 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.893 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.907 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:51.930 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:51.931 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:51.933 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:51.933 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef d8 2f 4b 98 42 00 d0 4e e7 01 22 2c 4b |
08:52:51.953 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:51.993 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:51.993 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:52.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:52.031 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:52.054 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.091 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:52.091 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef e4 1a 60 2d 4b c9 e7 0b 29 0f d1 11 4b |
08:52:52.135 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.135 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.149 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:52.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:52.173 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:52.176 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:52.176 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef f0 98 42 04 d1 00 22 2a 4b 9a 61 2a 4b |
08:52:52.196 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.236 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:52.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:52.278 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:52.279 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:52.279 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef fc bf e7 2a 4b |
08:52:52.299 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.328 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:52.366 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:52.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:52.368 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:52.369 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5000 with 256 bytes and CRC32 0x2785FADD |
08:52:52.369 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ee 00 01 00 50 00 00 dd fa 85 27 |
08:52:52.388 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.423 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.424 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.438 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:52.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:52.461 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:52.463 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 48,9% |
08:52:52.464 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 00 98 42 00 d0 3b e7 01 22 25 4b 9a 61 |
08:52:52.483 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.523 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:52.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:52.561 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:52.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.32->6/1/11 L_Data.ind, low priority hop count 6, tpdu 00 80 07 49 |
08:52:52.605 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.605 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.629 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:52.640 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 0c cb e7 c3 05 00 d4 37 e7 02 29 00 d1 |
08:52:52.685 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.699 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:52.722 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:52.725 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:52.746 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.746 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.781 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:52.781 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 18 34 e7 80 23 1c 43 31 e7 02 21 2f e7 |
08:52:52.827 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:52.865 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:52.865 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:52.889 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.936 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:52.937 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 24 80 13 10 40 88 42 00 d0 5a e7 77 e7 |
08:52:52.984 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:52.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:52.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:53.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:53.020 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:53.043 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.043 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.079 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:53.079 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 30 8c 71 00 00 42 42 65 00 c8 40 04 40 |
08:52:53.123 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.137 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:53.161 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:53.161 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:53.184 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.221 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:53.221 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 3c 02 c2 3a 00 c0 40 04 40 61 1d 00 00 |
08:52:53.266 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.280 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:53.303 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:53.303 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:53.326 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.326 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.365 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:53.365 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 48 63 82 3d 00 c1 1e 00 00 25 42 3c 00 |
08:52:53.410 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.424 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:53.447 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:53.448 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:53.470 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.489 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:53.489 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 54 d0 40 04 40 21 1e 00 00 49 c2 01 00 |
08:52:53.533 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:53.571 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:53.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:53.579 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:53.579 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 60 00 10 01 10 e0 71 00 00 d4 40 04 40 |
08:52:53.595 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.634 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:53.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:53.671 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:53.675 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:53.675 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 6c 2a 83 30 0c 41 18 06 00 43 82 6d 00 |
08:52:53.699 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.699 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.736 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:53.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:53.778 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:53.785 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:53.785 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 78 cc 40 04 40 29 82 69 00 0a 4a 70 06 |
08:52:53.800 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.800 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.839 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.839 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:53.877 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:53.877 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:53.879 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:53.879 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 84 b0 40 04 40 4b 82 3b 00 06 02 70 00 |
08:52:53.899 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.899 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.938 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.939 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:53.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:53.976 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:53.976 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:53.978 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:53.978 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 90 41 c2 74 00 c4 40 04 40 62 42 35 0e |
08:52:53.999 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:53.999 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.039 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.053 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:54.076 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:54.076 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:54.079 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:54.083 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 9c a1 1a 07 00 00 40 04 40 a1 32 00 00 |
08:52:54.099 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.139 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:54.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:54.186 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:54.192 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:54.192 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef a8 44 82 59 00 70 b5 0e 49 0e 48 ff f7 |
08:52:54.213 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.213 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.250 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:54.287 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:54.287 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:54.289 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:54.289 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef b4 bd fe a0 22 80 23 d2 05 9b 01 d5 58 |
08:52:54.309 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.349 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.349 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:54.387 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:54.387 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:54.394 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:54.394 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef c0 80 21 2c 00 63 1e 9c 41 08 48 49 01 |
08:52:54.409 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.409 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.449 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:54.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:54.493 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:54.498 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:54.498 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef cc e4 b2 ff f7 af fe 00 2d 05 d0 06 4b |
08:52:54.516 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.516 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.555 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.555 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.569 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:54.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:54.593 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:54.594 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:54.595 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef d8 9a 68 00 2a 01 d0 00 22 9a 60 20 00 |
08:52:54.614 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.655 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.655 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:54.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:54.692 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:54.715 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.750 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:54.750 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef e4 70 bd c0 46 08 10 00 00 0b 41 10 06 |
08:52:54.796 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.796 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.809 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:54.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:54.838 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:54.840 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:54.841 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef f0 00 00 02 50 70 b5 06 00 ff f7 d8 ff |
08:52:54.861 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.861 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.901 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.901 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:54.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:54.938 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:54.940 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:54.940 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef fc 00 28 18 d0 |
08:52:54.960 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.960 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:54.989 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:54.989 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:55.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:55.030 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:55.051 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:55.052 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.052 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.078 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5100 with 256 bytes and CRC32 0xD1E9EAAA |
08:52:55.082 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ee 00 01 00 51 00 00 aa ea e9 d1 |
08:52:55.121 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.121 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:55.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:55.159 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:55.180 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.181 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.160 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 50,3% |
08:52:55.197 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 00 10 4d 02 21 28 00 fe f7 f6 ff 00 24 |
08:52:55.243 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:55.281 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:55.281 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:55.283 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:55.284 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 0c 31 78 00 29 10 d1 0d 4e 23 09 f1 5c |
08:52:55.304 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.304 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.344 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.344 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:55.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:55.381 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:55.404 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.404 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.420 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:55.420 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 18 28 00 fe f7 ec ff 0f 23 1c 40 31 5d |
08:52:55.464 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.464 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:55.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:55.502 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:55.527 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.537 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:55.537 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 24 28 00 fe f7 e6 ff 03 21 28 00 fe f7 |
08:52:55.582 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.596 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:55.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:55.628 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:55.654 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.654 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.690 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:55.690 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 30 e2 ff 70 bd 0c 19 28 00 fe f7 dd ff |
08:52:55.736 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.737 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.753 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:55.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:55.774 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:55.776 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:55.776 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 3c e4 b2 01 36 e4 e7 c0 46 24 02 00 10 |
08:52:55.800 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.800 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.837 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.851 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:55.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:55.875 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:55.898 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.898 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.931 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:55.931 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 48 50 72 00 00 ff 22 f0 b5 c5 4c 85 b0 |
08:52:55.976 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:55.976 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:55.990 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:56.013 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:56.017 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:56.039 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.086 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:56.086 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 54 23 6b 1a 60 22 00 c4 4b 38 32 1d 79 |
08:52:56.131 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:56.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:56.170 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:56.197 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.224 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:56.224 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 60 00 93 01 3d ed b2 1d 71 13 78 00 2b |
08:52:56.269 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.282 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:56.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:56.306 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:56.328 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.372 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:56.372 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 6c 14 d0 01 3b db b2 13 70 00 2b 0f d1 |
08:52:56.417 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.417 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.431 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:56.455 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:56.458 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:56.476 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:56.477 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 78 22 00 39 32 13 78 ff 2b 0a d0 01 33 |
08:52:56.483 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.522 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:56.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:56.562 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:56.584 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.587 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:56.587 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 84 db b2 13 70 04 2b 05 d9 02 20 b8 4b |
08:52:56.632 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:56.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:56.674 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:56.676 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:56.677 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 90 1b 78 18 43 fe f7 cd f9 01 23 1d 42 |
08:52:56.696 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.737 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.737 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:56.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:56.775 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:56.777 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:56.777 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 9c 00 d0 e8 e0 b3 4d 2b 7a 00 2b 00 d1 |
08:52:56.797 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.837 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.851 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:56.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:56.875 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:56.877 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:56.877 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef a8 12 e1 ee 7a 00 2e 00 d1 e1 e0 01 3e |
08:52:56.897 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:56.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:56.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:56.974 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:56.978 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:56.979 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef b4 f6 b2 ee 72 00 2e 11 d1 2f 00 98 37 |
08:52:56.997 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:56.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.037 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.037 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.051 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:57.075 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:57.080 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:57.082 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:57.082 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef c0 3b 68 04 20 01 93 fe f7 f1 f9 04 21 |
08:52:57.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.142 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:57.180 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:57.186 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:57.192 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:57.192 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef cc 02 00 33 00 01 98 fe f7 7d fc 31 00 |
08:52:57.208 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.248 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.262 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:57.285 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:57.286 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:57.288 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:57.288 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef d8 2a 7a 38 68 fe f7 a6 fc a3 4e 73 7a |
08:52:57.307 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.347 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.361 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:57.385 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:57.385 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:57.387 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:57.387 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef e4 00 2b 2a d0 37 00 fc 21 94 37 38 68 |
08:52:57.407 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.449 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:57.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:57.485 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:57.487 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:57.487 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef f0 ff 31 03 68 5b 68 98 47 80 06 20 d5 |
08:52:57.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.550 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.550 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:57.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:57.586 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:57.602 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:57.602 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef fc 9d 4b 9d 4a |
08:52:57.609 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.609 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.636 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.636 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:57.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:57.674 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:57.686 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:57.697 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.752 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5200 with 256 bytes and CRC32 0xCC85D3FA |
08:52:57.754 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ee 00 01 00 52 00 00 fa d3 85 cc |
08:52:57.793 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.808 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:57.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:57.831 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:57.839 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 51,7% |
08:52:57.848 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 00 1b 78 01 3b db b2 13 70 00 2b 18 d1 |
08:52:57.857 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.857 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.895 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.895 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:57.909 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:57.932 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:57.936 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:57.957 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:57.957 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 0c f8 21 38 68 ff 31 03 68 5b 68 98 47 |
08:52:57.957 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:57.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.001 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.001 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:58.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:58.041 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:58.056 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:58.056 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 18 fc 21 96 4b ff 31 18 70 38 68 03 68 |
08:52:58.065 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.066 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.103 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.118 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:58.141 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:58.141 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:58.161 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:58.161 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 24 5b 68 98 47 02 23 18 42 02 d0 72 78 |
08:52:58.167 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.206 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:52:58.243 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:52:58.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:52:58.257 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:58.257 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 30 13 43 73 70 20 23 8e 4a 51 78 0b 43 |
08:52:58.279 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.321 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:52:58.359 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:52:58.359 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:52:58.382 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.382 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.390 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:58.390 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 3c 53 70 00 9b 1b 79 9b 07 21 d1 27 00 |
08:52:58.438 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:52:58.472 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:52:58.472 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:52:58.499 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.534 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:58.534 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 48 3c 37 3a 78 00 2a 1c d0 21 00 87 4e |
08:52:58.579 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.580 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:52:58.617 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:52:58.619 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:52:58.620 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:58.620 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 54 3d 31 09 78 33 7a 0b 43 71 7a 0b 43 |
08:52:58.640 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.640 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.680 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.694 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:52:58.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:52:58.718 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:52:58.737 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:58.737 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 60 13 d1 23 00 3e 33 1b 78 00 2b 0e d1 |
08:52:58.744 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.745 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.783 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:52:58.821 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:52:58.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:52:58.844 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.844 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.858 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:58.858 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 6c 0d 2a 00 d9 cf e0 27 00 3c 37 3b 78 |
08:52:58.903 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.903 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:52:58.940 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:52:58.941 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:52:58.963 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:58.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:58.991 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:58.991 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 78 06 3b 07 2b 00 d8 e4 e0 22 00 3c 32 |
08:52:59.037 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.038 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.052 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:52:59.075 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:52:59.075 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:52:59.080 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:59.080 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 84 13 78 01 3b 13 70 00 9b 1f 79 3b 07 |
08:52:59.098 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.098 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.138 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.138 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.152 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:52:59.176 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:52:59.176 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:52:59.199 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.199 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:59.199 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 90 6f d1 20 00 3f 30 03 78 00 2b 35 d0 |
08:52:59.244 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.244 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:52:59.282 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:52:59.282 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:52:59.296 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:59.296 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 9c 25 00 74 49 3d 35 2d 78 0a 7a 2a 43 |
08:52:59.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.34->6/1/12 L_Data.ind, low priority hop count 6, tpdu 00 80 07 1c |
08:52:59.327 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.327 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.373 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:52:59.404 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:52:59.404 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:52:59.426 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.426 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.446 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:59.446 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef a8 4d 7a 2a 43 2c d1 22 00 3e 32 12 78 |
08:52:59.491 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:52:59.528 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:52:59.528 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:52:59.530 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:59.530 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef b4 00 2a 27 d1 22 00 38 32 12 78 00 2a |
08:52:59.550 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.550 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.590 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.590 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.604 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:52:59.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:52:59.627 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:52:59.629 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:59.629 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef c0 22 d1 01 3b db b2 03 70 20 6c 00 28 |
08:52:59.650 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.690 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.690 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.704 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:52:59.728 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:52:59.728 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:52:59.733 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:59.733 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef cc 1c da 03 2b 00 d1 ca 61 05 21 4b 43 |
08:52:59.751 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.791 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.791 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.805 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:52:59.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:52:59.830 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:52:59.835 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:59.835 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef d8 67 4a 68 4e 9d 5c ff f7 e5 fe 00 28 |
08:52:59.852 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.892 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:52:59.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:52:59.933 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:52:59.940 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:52:59.940 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef e4 0c d0 44 36 2b 09 f3 5c 03 a8 03 70 |
08:52:59.955 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:52:59.995 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:52:59.995 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:00.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:00.032 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:00.035 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:00.036 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef f0 0f 23 1d 40 73 5d 43 70 00 23 83 70 |
08:53:00.055 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.055 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.095 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.095 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:00.133 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:00.133 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:00.135 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:00.135 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef fc ff f7 fa fe |
08:53:00.159 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.184 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:00.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:00.223 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:00.230 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:00.237 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5300 with 256 bytes and CRC32 0xCC6F1603 |
08:53:00.238 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ee 00 01 00 53 00 00 03 16 6f cc |
08:53:00.247 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.282 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.282 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:00.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:00.320 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:00.322 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 53,2% |
08:53:00.324 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 00 23 00 06 22 38 33 1a 70 00 2f 32 d1 |
08:53:00.343 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.382 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.383 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.397 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:00.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:00.424 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:00.426 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:00.426 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 0c 78 23 00 9a 57 4d 13 71 23 00 22 00 |
08:53:00.446 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.486 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:00.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:00.523 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:00.546 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.546 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.587 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:00.587 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 18 3d 33 3e 32 1b 78 12 78 13 43 01 2b |
08:53:00.632 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:00.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:00.670 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:00.676 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:00.676 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 24 03 d0 ab 7a 00 2b 00 d0 af 72 23 00 |
08:53:00.693 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.733 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.733 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:00.770 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:00.770 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:00.793 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.800 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:00.806 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 3f 33 1a 78 00 2a 01 d1 06 32 1a 70 |
08:53:00.851 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.851 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:00.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:00.888 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:00.910 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.910 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:00.942 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:00.942 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 3c fc 21 94 35 28 68 ff 31 03 68 5b 68 |
08:53:00.986 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:00.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.001 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:01.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:01.024 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:01.046 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.047 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.060 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:01.060 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 48 98 47 c0 06 11 d5 26 00 44 36 33 78 |
08:53:01.105 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.105 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.119 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:01.143 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:01.149 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:01.170 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:01.170 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 54 01 3b db b2 33 70 00 2b 09 d1 fa 21 |
08:53:01.177 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.215 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:01.253 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:01.253 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:01.276 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.291 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:01.291 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 60 28 68 ff 31 03 68 3c 34 5b 68 98 47 |
08:53:01.335 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.349 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:01.372 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:01.373 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:01.395 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.396 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.399 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:01.399 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 6c 15 23 30 70 23 70 05 b0 f0 bd 2e 00 |
08:53:01.443 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:01.482 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:01.482 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:01.504 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.504 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.555 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:01.555 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 78 fc 21 94 36 30 68 ff 31 03 68 5b 68 |
08:53:01.599 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.599 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:01.637 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:01.637 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:01.660 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.660 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.686 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:01.686 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 84 98 47 40 06 00 d4 29 e7 27 00 3a 37 |
08:53:01.733 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.733 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.744 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:01.768 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:01.770 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:01.772 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:01.772 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 90 3b 78 01 3b db b2 3b 70 00 2b 00 d0 |
08:53:01.793 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.833 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.847 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:01.870 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:01.874 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:01.882 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:01.882 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 9c 20 e7 fd 21 30 68 49 00 03 68 5b 68 |
08:53:01.896 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.936 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:01.950 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:01.974 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:01.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:01.997 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:01.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.009 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:02.009 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef a8 98 47 fc 21 38 70 30 68 ff 31 03 68 |
08:53:02.054 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:02.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:02.091 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:02.109 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:02.110 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef b4 5b 68 98 47 40 07 03 d5 01 22 6b 78 |
08:53:02.117 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.118 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.154 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:02.192 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:02.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:02.207 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:02.207 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef c0 13 43 6b 70 08 23 2a 4a 51 78 0b 43 |
08:53:02.217 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.217 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.255 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:02.292 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:02.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:02.294 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:02.294 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef cc 53 70 07 e7 2e 00 fc 21 94 36 30 68 |
08:53:02.314 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.314 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.354 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.368 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:02.392 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:02.402 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:02.404 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:02.404 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef d8 ff 31 03 68 5b 68 98 47 01 23 18 42 |
08:53:02.424 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.424 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.464 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.464 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.478 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:02.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:02.502 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:02.503 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:02.503 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef e4 00 d1 fb e6 27 00 3a 37 3b 78 01 3b |
08:53:02.524 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.563 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:02.601 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:02.601 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:02.604 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:02.604 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef f0 db b2 3b 70 00 2b 00 d0 f2 e6 fd 21 |
08:53:02.627 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.664 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.664 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:02.701 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:02.706 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:02.719 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:02.719 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef fc 30 68 49 00 |
08:53:02.729 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.757 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.757 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:02.795 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:02.795 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:02.807 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:02.808 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5400 with 256 bytes and CRC32 0x25BBDFC6 |
08:53:02.808 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ee 00 01 00 54 00 00 c6 df bb 25 |
08:53:02.819 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.854 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:02.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:02.892 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:02.895 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 54,6% |
08:53:02.895 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 00 03 68 5b 68 98 47 08 23 6a 78 38 70 |
08:53:02.915 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.958 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:02.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:02.969 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:02.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:03.001 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:03.002 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:03.002 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 0c 13 43 6b 70 e6 e6 33 00 fe 21 94 33 |
08:53:03.023 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.062 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.077 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:03.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:03.100 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:03.103 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:03.103 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 18 18 68 ff 31 03 68 5b 68 98 47 17 4b |
08:53:03.123 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.163 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.163 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:03.201 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:03.201 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:03.204 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:03.204 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 24 3a 78 9b 1a 5b 7d 03 42 00 d1 20 e7 |
08:53:03.225 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.225 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.268 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.278 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:03.301 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:03.301 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:03.324 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.324 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.340 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:03.341 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 30 23 00 07 20 3c 33 1b 78 11 4a d9 08 |
08:53:03.385 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.385 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.400 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:03.423 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:03.423 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:03.445 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.474 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:03.474 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 3c 01 36 03 40 d3 5c 72 5c 13 43 73 54 |
08:53:03.518 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.533 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:03.556 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:03.556 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:03.561 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:03.561 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 48 1a e7 fe 21 94 35 28 68 49 00 03 68 |
08:53:03.579 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.619 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.619 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:03.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:03.657 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:03.659 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:03.659 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 54 5b 68 98 47 09 4b 3a 78 9b 1a 5b 7b |
08:53:03.679 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.719 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.719 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.733 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:03.757 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:03.757 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:03.759 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:03.759 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 60 03 42 e5 d1 0c e7 c0 46 b8 01 00 10 |
08:53:03.779 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.780 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.820 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.820 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.834 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:03.857 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:03.857 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:03.879 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.889 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:03.889 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 6c d4 00 00 10 38 01 00 10 f3 01 00 10 |
08:53:03.935 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:03.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:03.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:03.972 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:03.996 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:03.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.009 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:04.009 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 78 69 72 00 00 0c 72 00 00 61 72 00 00 |
08:53:04.054 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:04.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:04.091 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:04.114 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.114 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.120 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:04.120 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 84 c0 21 10 b5 05 4c c9 01 20 68 ff f7 |
08:53:04.170 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:04.202 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:04.206 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:04.227 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.243 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:04.243 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 90 cf fc 80 21 a0 68 49 01 ff f7 ca fc |
08:53:04.288 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.302 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:04.326 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:04.326 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:04.347 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.348 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:04.348 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 9c 10 bd c0 46 d4 00 00 10 70 b5 0d 4c |
08:53:04.393 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.393 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:04.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:04.430 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:04.455 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.455 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.492 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:04.492 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef a8 06 00 a5 68 01 20 ad b2 02 2e 06 d9 |
08:53:04.536 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:04.574 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:04.574 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:04.580 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:04.581 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef b4 0a 4b 0b 49 18 68 01 f0 59 fa 02 3e |
08:53:04.597 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.597 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.637 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.637 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:04.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:04.675 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:04.683 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:04.684 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef c0 70 43 00 28 00 dc 70 bd a3 68 9a b2 |
08:53:04.697 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.736 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.737 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:04.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:04.778 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:04.800 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.800 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.804 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:04.804 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef cc ab 1a 01 d5 61 68 5b 18 15 00 c0 1a |
08:53:04.849 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.863 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:04.886 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:04.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:04.909 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.909 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.909 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:04.909 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef d8 f3 e7 c0 46 10 e0 00 e0 e0 00 00 10 |
08:53:04.958 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:04.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:04.969 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:04.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:04.996 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:04.999 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:04.999 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef e4 40 42 0f 00 f0 b5 07 00 0c 00 8d b0 |
08:53:05.020 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.059 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.073 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:05.096 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:05.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:05.120 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.120 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.134 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:05.134 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef f0 b8 6a fe f7 0f f8 00 28 fa d0 b8 6d |
08:53:05.178 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.193 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:05.216 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:05.225 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:05.226 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:05.227 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef fc 00 28 03 d0 |
08:53:05.247 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.247 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.276 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.290 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:05.313 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:05.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:05.315 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:05.317 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5500 with 256 bytes and CRC32 0x08D0008E |
08:53:05.317 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ee 00 01 00 55 00 00 8e 00 d0 08 |
08:53:05.335 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.370 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.385 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:05.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:05.409 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:05.410 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 56,1% |
08:53:05.417 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 00 03 68 21 00 1b 68 98 47 3d 6d 2b 7d |
08:53:05.431 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.431 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.471 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:05.508 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:05.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:05.510 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:05.510 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 0c 00 2b 69 d0 bf f3 4f 8f bf f3 6f 8f |
08:53:05.531 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.531 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.570 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.584 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:05.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:05.612 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:05.613 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:05.613 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 18 72 b6 28 00 fe f7 ba fd 04 00 fe f7 |
08:53:05.633 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.688 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:05.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:05.712 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:05.714 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:05.714 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 24 9b fd 51 4b ee 69 c3 18 80 20 31 00 |
08:53:05.734 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.734 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.774 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.788 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:05.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:05.812 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:05.814 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:05.814 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 30 40 01 01 93 01 f0 1c fa 01 38 70 43 |
08:53:05.834 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.875 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:05.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:05.916 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:05.923 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:05.923 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 3c 01 9b 18 18 84 42 3e d1 fe f7 8a fd |
08:53:05.938 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:05.982 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:05.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.002 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:06.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:06.017 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:06.029 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:06.029 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 48 48 4b c4 18 fe f7 86 fd 46 4b c0 18 |
08:53:06.040 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.082 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:06.117 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:06.117 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:06.119 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:06.127 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 54 84 42 38 d1 32 23 e6 17 36 05 36 0d |
08:53:06.140 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.179 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.179 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.193 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:06.217 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:06.217 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:06.238 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.238 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.242 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:06.242 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 60 a6 19 36 13 01 22 07 a9 02 a8 02 93 |
08:53:06.286 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.301 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:06.324 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:06.324 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:06.347 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.429 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:06.429 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 6c 03 96 04 96 fe f7 f8 fc 07 9b db b2 |
08:53:06.476 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:06.512 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:06.512 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:06.535 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.535 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.646 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:06.646 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 78 07 93 00 2b 1b d1 fa 21 34 33 02 93 |
08:53:06.695 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.695 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:06.738 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:06.747 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:06.770 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.770 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.868 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:06.868 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 84 3a 4b 89 00 18 68 03 96 04 96 01 f0 |
08:53:06.914 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.928 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:06.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:06.951 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:06.974 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:06.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:06.980 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:06.980 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 90 ef f9 01 22 05 90 07 a9 02 a8 fe f7 |
08:53:07.024 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.025 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:07.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:07.062 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:07.085 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.102 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:07.102 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 9c e3 fc 07 9b 00 2b 08 d1 35 33 01 22 |
08:53:07.146 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:07.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:07.187 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:07.189 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:07.189 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef a8 07 a9 02 a8 02 93 03 96 04 96 fe f7 |
08:53:07.209 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.209 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.249 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.249 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:07.286 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:07.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:07.302 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:07.302 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef b4 d7 fc 07 9b db b2 00 2b 05 d0 ff f7 |
08:53:07.311 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.311 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.349 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.349 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:07.386 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:07.386 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:07.396 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:07.396 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef c0 11 fc 00 2c be d0 a4 19 c0 e7 00 26 |
08:53:07.409 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.409 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.449 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:07.487 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:07.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:07.495 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:07.495 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef cc 2b 69 ea 68 9b 18 01 3b 1e 70 ea 68 |
08:53:07.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.509 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.548 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:07.586 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:07.586 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:07.609 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.609 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.619 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:07.619 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef d8 96 42 35 d3 00 23 2b 75 ab 61 62 b6 |
08:53:07.663 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:07.701 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:07.705 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:07.726 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.727 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.758 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:07.758 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef e4 7c 6d 00 2c 2b d0 22 4d 63 5d 00 2b |
08:53:07.804 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:07.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:07.842 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:07.865 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.865 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.890 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:07.891 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef f0 0f d0 a0 68 01 00 fe f7 c5 fc 00 28 |
08:53:07.935 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:07.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:07.973 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:07.973 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:07.999 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:07.999 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.007 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:08.007 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef fc df d1 80 22 |
08:53:08.039 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:08.078 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:08.078 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:08.093 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:08.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.113 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5600 with 256 bytes and CRC32 0x6223B551 |
08:53:08.152 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ee 00 01 00 56 00 00 51 b5 23 62 |
08:53:08.192 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:08.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:08.230 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:08.252 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.252 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.236 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 57,5% |
08:53:08.253 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 00 21 00 60 68 52 00 14 31 fe f7 e6 fc |
08:53:08.299 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:08.339 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:08.341 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:08.362 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:08.362 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 0c 00 28 d6 d1 60 55 19 4d 63 5d 00 2b |
08:53:08.363 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.407 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.422 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:08.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:08.445 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:08.447 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:08.447 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 18 13 d0 85 26 b6 00 a0 59 01 00 fe f7 |
08:53:08.466 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.507 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.507 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.521 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:08.544 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:08.544 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:08.546 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:08.546 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 24 af fc 00 28 c9 d1 21 00 80 22 a0 59 |
08:53:08.567 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.567 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.607 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:08.644 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:08.644 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:08.647 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:08.647 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 30 15 31 00 02 52 00 ff 31 fe f7 ce fc |
08:53:08.666 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.706 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:08.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:08.751 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:08.753 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:08.753 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 3c 00 28 be d1 60 55 01 20 0d b0 f0 bd |
08:53:08.774 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.813 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:08.850 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:08.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:08.852 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:08.852 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 48 80 23 92 1b db 00 9a 42 00 dd 1a 00 |
08:53:08.872 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.912 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:08.927 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:08.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:08.951 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:08.953 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:08.953 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 54 29 69 a0 19 89 19 fe f7 bd fc 00 28 |
08:53:08.973 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:08.973 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.013 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.013 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.028 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:09.051 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:09.064 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:09.066 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:09.066 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 60 ad d1 80 23 db 00 f6 18 b5 e7 c0 46 |
08:53:09.086 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.126 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.127 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:09.163 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:09.163 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:09.165 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:09.165 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 6c 00 f0 ff ff e0 00 00 10 22 02 00 00 |
08:53:09.185 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.225 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.225 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:09.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:09.263 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:09.286 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.287 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:09.287 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 78 21 02 00 00 01 21 10 b5 ff f7 32 ff |
08:53:09.332 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:09.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:09.370 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:09.376 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:09.376 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 84 bf f3 4f 8f 02 4b 03 4a da 60 bf f3 |
08:53:09.392 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.392 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.432 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.432 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.447 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:09.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:09.470 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:09.492 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.493 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.531 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:09.531 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 90 4f 8f fe e7 00 ed 00 e0 04 00 fa 05 |
08:53:09.579 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:09.614 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:09.614 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:09.637 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.637 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.661 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:09.661 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 9c 80 20 70 b5 40 04 ff f7 87 fb ff f7 |
08:53:09.707 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.707 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:09.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:09.744 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:09.767 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.785 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:09.785 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef a8 ed fe 1f 21 01 22 0b 4b 80 24 1b 68 |
08:53:09.829 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.830 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.844 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:09.867 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:09.867 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:09.889 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.937 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:09.937 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef b4 0a 4d 19 40 8a 40 5b 06 09 49 9b 0f |
08:53:09.982 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:09.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:09.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:10.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:10.020 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:10.044 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.090 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:10.090 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef c0 9b 00 c9 18 49 6c a4 03 90 00 ab 68 |
08:53:10.135 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.135 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.149 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:10.172 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:10.172 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:10.194 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.203 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:10.203 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef cc 23 40 5e 42 73 41 5b 42 13 40 43 50 |
08:53:10.248 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.262 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:10.285 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:10.285 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:10.308 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.316 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:10.317 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef d8 f7 e7 c0 46 d4 00 00 10 10 e0 00 e0 |
08:53:10.362 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:10.398 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:10.398 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:10.401 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:10.401 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef e4 8c 71 00 00 f0 b5 b5 4f 85 b0 38 00 |
08:53:10.421 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.422 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.461 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.462 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:10.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:10.500 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:10.514 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:10.514 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef f0 fe f7 32 fc 00 28 49 d0 38 00 fe f7 |
08:53:10.524 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.562 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:10.600 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:10.600 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:10.622 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.623 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.659 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:10.659 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef fc 61 fd 00 28 |
08:53:10.696 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:10.730 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:10.730 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:10.753 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.753 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.778 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:10.809 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5700 with 256 bytes and CRC32 0x4ED1317D |
08:53:10.810 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ee 00 01 00 57 00 00 7d 31 d1 4e |
08:53:10.850 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.865 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:10.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:10.888 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:10.911 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.890 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 58,9% |
08:53:10.927 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 00 44 db b0 4d c4 b2 2b 6c 00 2b 04 da |
08:53:10.972 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:10.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:10.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:11.009 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:11.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:11.032 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.053 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:11.053 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 0c 02 2c f3 d1 01 33 2b 64 f0 e7 5e 10 |
08:53:11.097 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.097 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.112 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:11.135 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:11.135 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:11.158 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.158 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.163 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:11.164 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 18 03 2c 00 d0 34 e1 ff f7 c5 fc 00 28 |
08:53:11.209 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.209 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.224 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:11.247 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:11.248 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:11.254 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:11.254 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 24 03 d0 06 21 38 00 fe f7 e4 fc f6 b2 |
08:53:11.270 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.311 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.311 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.324 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:11.348 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:11.348 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:11.351 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:11.351 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 30 01 2e 27 d9 2b 00 00 22 38 33 1a 70 |
08:53:11.371 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.411 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:11.448 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:11.448 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:11.450 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:11.450 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 3c 2b 00 39 33 19 78 01 3e f6 b2 91 42 |
08:53:11.473 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.510 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:11.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:11.547 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:11.567 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:11.567 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 48 06 d0 1a 70 9e 4b 18 78 02 23 98 43 |
08:53:11.573 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.573 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.613 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:11.649 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:11.649 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:11.651 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:11.651 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 54 fd f7 ed fe 2a 00 45 32 13 78 0f 21 |
08:53:11.671 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.725 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:11.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:11.749 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:11.751 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:11.751 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 60 18 00 88 43 c0 28 69 d1 0b 40 04 2b |
08:53:11.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.812 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:11.856 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:11.857 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:11.859 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:11.859 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 6c 10 d0 09 2b 53 d0 0b 2b 53 d0 0c 2b |
08:53:11.882 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.922 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.922 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:11.933 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:11.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:11.957 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:11.977 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:11.977 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 78 0b d0 0d 2b 51 d0 05 24 0e 2b 06 d0 |
08:53:11.983 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:11.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.022 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.022 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.036 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:12.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:12.062 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:12.070 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:12.070 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 84 01 22 8f 4b 52 42 1a 64 05 b0 f0 bd |
08:53:12.084 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.124 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.138 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:12.161 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:12.161 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:12.163 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:12.163 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 90 00 24 8d 4f a2 00 bb 18 1b 69 45 35 |
08:53:12.183 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.223 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:12.260 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:12.261 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:12.263 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:12.263 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 9c 7b 60 00 23 19 00 01 95 01 33 d8 b2 |
08:53:12.283 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.283 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.322 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.337 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:12.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:12.360 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:12.381 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:12.381 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef a8 86 42 3c d8 0f 23 3b 73 0a 3b 63 43 |
08:53:12.381 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.425 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.440 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:12.463 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:12.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:12.486 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.499 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:12.499 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef b4 ba 18 11 61 84 4a d3 18 01 93 01 9b |
08:53:12.544 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:12.582 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:12.582 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:12.602 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:12.602 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef c0 5c 78 ff 2c de d0 3e 00 20 00 98 36 |
08:53:12.608 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.647 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.661 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:12.685 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:12.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:12.690 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:12.690 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef cc 35 68 fd f7 ed fe 00 23 02 00 21 00 |
08:53:12.708 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.708 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.748 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.748 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.763 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:12.785 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:12.785 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:12.787 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:12.788 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef d8 28 00 fe f7 79 f9 07 22 7b 4b 22 40 |
08:53:12.808 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.808 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.848 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.862 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:12.885 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:12.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:12.908 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.915 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:12.915 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef e4 9b 5c 7d 1c 02 93 e3 08 03 93 02 9a |
08:53:12.959 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:12.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:12.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:12.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:12.997 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:13.020 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.045 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:13.045 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef f0 eb 5c 13 42 0e d0 20 00 36 68 fd f7 |
08:53:13.089 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:13.127 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:13.127 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:13.150 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.150 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.166 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:13.166 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef fc d7 fe 21 00 |
08:53:13.198 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.213 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:13.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:13.253 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:13.275 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.275 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.322 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:13.326 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5800 with 256 bytes and CRC32 0xE830A8D3 |
08:53:13.327 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ee 00 01 00 58 00 00 d3 a8 30 e8 |
08:53:13.368 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.368 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.382 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:13.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:13.406 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:13.408 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 60,4% |
08:53:13.409 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 00 02 00 30 00 fe f7 92 f9 03 9b 02 9a |
08:53:13.429 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.469 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.469 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:13.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:13.506 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:13.513 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:13.513 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 0c eb 5c 93 43 03 9a ab 54 01 9b 01 33 |
08:53:13.529 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.569 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.569 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:13.607 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:13.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:13.613 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:13.613 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 18 d0 e7 01 24 b9 e7 02 24 b7 e7 04 24 |
08:53:13.630 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.670 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.684 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:13.707 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:13.707 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:13.719 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:13.719 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 24 b5 e7 dd 00 ac 46 08 25 6d 42 ac 44 |
08:53:13.730 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.731 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.769 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.769 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:13.808 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:13.808 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:13.823 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:13.823 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 30 65 46 01 98 18 5c a8 40 01 43 b3 e7 |
08:53:13.833 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.871 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.871 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:13.908 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:13.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:13.924 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:13.925 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 3c 82 2b a1 d1 04 2e 9f d9 53 78 95 78 |
08:53:13.933 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.933 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.971 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:13.971 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:13.993 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:14.010 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:14.010 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:14.024 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:14.024 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 48 10 22 01 93 1a 40 0c 23 2b 40 1a 43 |
08:53:14.034 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.072 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.072 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:14.109 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:14.109 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:14.118 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:14.118 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 54 16 00 fc 21 73 1e 9e 41 5d 4f 02 92 |
08:53:14.134 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.174 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.176 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.188 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:14.211 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:14.212 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:14.222 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:14.223 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 60 38 68 ff 31 03 68 58 4c 5b 68 f6 b2 |
08:53:14.237 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.274 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:14.312 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:14.313 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:14.327 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:14.327 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 6c 98 47 00 06 7f d5 02 9b 00 2b 7c d0 |
08:53:14.341 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.375 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.389 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:14.413 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:14.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:14.415 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:14.415 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 78 fc 21 38 68 49 00 03 68 5b 68 98 47 |
08:53:14.438 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.438 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.478 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.478 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:14.516 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:14.516 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:14.518 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:14.518 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 84 23 00 e0 72 98 33 04 20 1f 68 fd f7 |
08:53:14.538 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.579 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:14.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:14.616 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:14.618 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:14.618 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 90 8d fe 00 23 02 00 04 21 38 00 fe f7 |
08:53:14.638 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:14.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:14.716 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:14.719 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:14.719 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 9c 19 f9 23 7a b3 42 06 d0 23 00 98 33 |
08:53:14.739 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.779 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.779 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.794 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:14.817 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:14.817 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:14.824 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:14.824 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef a8 32 00 03 21 18 68 fe f7 3d f9 60 23 |
08:53:14.840 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.840 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.880 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.880 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:14.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:14.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:14.923 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:14.925 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:14.925 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef b4 2b 40 5a 1e 93 41 62 7a 26 72 de b2 |
08:53:14.947 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 04 38 |
08:53:14.966 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:14.966 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.005 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.005 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:15.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:15.044 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:15.065 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:15.065 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef c0 9a 42 0b d0 27 00 98 37 32 00 01 21 |
08:53:15.066 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.066 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:15.167 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.186 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:15.195 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:15.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 05 a0 |
08:53:15.234 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.234 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.240 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:15.240 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef cc 38 68 fe f7 2d f9 32 00 05 21 38 68 |
08:53:15.284 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:15.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:15.322 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:15.345 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.383 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:15.383 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef d8 fe f7 28 f9 01 23 3e 4a 66 72 29 09 |
08:53:15.427 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:15.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:15.465 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:15.488 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.490 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:15.490 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef e4 37 4e 19 40 11 70 32 00 e9 09 3e 32 |
08:53:15.535 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.535 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.549 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:15.573 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:15.573 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:15.595 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.597 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:15.597 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef f0 11 70 2a 00 20 78 42 40 1a 42 14 d0 |
08:53:15.642 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.642 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.655 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:15.679 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:15.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:15.702 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.702 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.723 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:15.723 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef fc 1d 40 98 43 |
08:53:15.757 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:15.794 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:15.798 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:15.820 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.837 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:15.874 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5900 with 256 bytes and CRC32 0xC1AF477D |
08:53:15.876 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ee 00 01 00 59 00 00 7d 47 af c1 |
08:53:15.916 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.916 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:15.930 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:15.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:15.953 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:15.957 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 61,8% |
08:53:15.958 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 00 28 43 fd f7 16 fe 0c 25 23 00 e8 b2 |
08:53:15.977 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:15.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.017 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:16.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:16.054 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:16.062 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:16.062 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 0c 98 33 1f 68 fd f7 4c fe 29 00 02 00 |
08:53:16.078 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.078 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.118 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.118 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.133 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:16.155 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:16.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:16.173 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:16.173 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 18 00 23 38 00 01 35 fe f7 d7 f8 0f 2d |
08:53:16.181 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.181 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.217 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:16.255 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:16.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:16.278 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:16.278 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 24 f0 d1 01 9b 1b 07 0e d5 32 00 4b 32 |
08:53:16.278 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.278 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.322 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:16.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:16.360 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:16.367 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:16.367 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 30 13 78 00 2b 02 d0 00 23 13 70 e3 72 |
08:53:16.386 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.386 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.423 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.423 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.437 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:16.460 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:16.460 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:16.483 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.499 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:16.499 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 3c 33 00 4c 33 1a 78 00 2a 01 d0 00 22 |
08:53:16.544 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.544 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.558 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:16.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:16.585 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:16.611 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.633 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:16.633 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 48 1a 70 01 9b 9b 07 00 d4 18 e7 03 22 |
08:53:16.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:16.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:16.715 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:16.736 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.739 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:16.739 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 54 20 78 45 36 33 79 10 40 01 32 13 42 |
08:53:16.784 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.784 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.798 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:16.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:16.821 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:16.828 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:16.829 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 60 00 d0 10 43 db 06 01 d5 08 23 18 43 |
08:53:16.843 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.884 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.884 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:16.921 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:16.921 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:16.942 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:16.942 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:16.963 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:16.963 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 6c fd f7 e1 fd 08 e7 23 7a b3 42 9c d0 |
08:53:17.008 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.008 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.022 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:17.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:17.045 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:17.047 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:17.047 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 78 23 00 98 33 32 00 00 21 18 68 fe f7 |
08:53:17.070 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.109 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.109 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:17.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:17.154 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:17.155 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:17.155 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 84 d3 f8 8a e7 0b 2b 00 dd fe e6 22 00 |
08:53:17.175 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.175 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.216 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:17.253 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:17.253 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:17.256 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:17.256 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 90 30 3a d2 b2 09 2a 06 d9 22 00 41 3a |
08:53:17.277 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.316 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.316 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.330 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:17.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:17.354 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:17.355 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:17.355 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 9c 05 2a 00 d9 f4 e6 37 3c e2 b2 01 21 |
08:53:17.376 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.416 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:17.453 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:17.453 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:17.455 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:17.455 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef a8 0b 42 05 d0 29 00 45 31 89 5d 09 01 |
08:53:17.475 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.516 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.516 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:17.552 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:17.553 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:17.555 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:17.555 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef b4 0a 43 d2 b2 29 00 45 31 8a 55 a7 e6 |
08:53:17.576 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:17.653 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:17.656 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:17.658 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:17.658 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef c0 24 02 00 10 b8 01 00 10 38 01 00 10 |
08:53:17.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.718 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.732 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:17.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:17.758 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:17.761 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:17.761 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef cc 69 72 00 00 61 72 00 00 cc 01 00 10 |
08:53:17.781 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.781 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.821 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:17.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:17.859 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:17.860 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:17.861 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef d8 f5 01 00 10 f0 b5 85 b0 01 90 fe f7 |
08:53:17.881 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.881 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.926 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.926 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:17.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:17.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:17.958 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:17.960 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:17.960 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef e4 0a f9 01 9b 4c 4e 9c 6a 03 23 22 00 |
08:53:17.980 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:17.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.020 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:18.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:18.058 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:18.081 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.081 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.085 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:18.085 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef f0 63 63 e3 63 00 23 68 32 21 00 a3 60 |
08:53:18.130 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:18.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:18.167 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:18.189 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.194 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:18.194 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef fc a3 62 13 80 |
08:53:18.227 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:18.266 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:18.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:18.279 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:18.289 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.314 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5A00 with 256 bytes and CRC32 0xABB184C5 |
08:53:18.316 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ee 00 01 00 5a 00 00 c5 84 b1 ab |
08:53:18.356 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:18.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:18.394 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:18.397 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 63,2% |
08:53:18.398 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 00 01 22 6f 31 e3 60 05 39 22 75 4b 71 |
08:53:18.417 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.417 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.457 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.457 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:18.494 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:18.494 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:18.505 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:18.505 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 0c 0b 80 23 61 e3 64 0b 80 62 75 22 00 |
08:53:18.517 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.557 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.558 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:18.595 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:18.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:18.605 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:18.605 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 18 2c 32 23 63 a3 64 a3 63 4b 80 0b 71 |
08:53:18.618 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.658 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.658 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:18.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:18.696 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:18.719 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.719 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.726 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:18.726 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 24 13 70 a7 69 3d 4a 3e 4b 97 42 59 d1 |
08:53:18.770 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.785 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:18.808 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:18.808 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:18.831 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.854 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:18.854 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 30 c4 22 ff 21 92 00 b3 58 8b 43 b3 50 |
08:53:18.898 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.898 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:18.935 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:18.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:18.941 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:18.941 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 3c 38 00 fe f7 ff fb 01 22 a3 1d db 7f |
08:53:18.958 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:18.998 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:18.998 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.013 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:19.036 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:19.036 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:19.057 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.081 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:19.081 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 48 3d 68 03 93 03 99 6b 6f 8a 40 13 43 |
08:53:19.126 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.126 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:19.164 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:19.164 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:19.187 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.187 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.191 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:19.191 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 54 02 92 6b 67 63 1d d9 7f 81 22 28 00 |
08:53:19.235 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.235 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.249 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:19.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:19.274 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:19.296 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.297 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.317 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:19.317 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 60 fe f7 58 fc 01 22 6b 68 2f 49 13 43 |
08:53:19.362 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:19.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:19.399 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:19.406 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:19.407 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 6c 6b 60 3b 79 1e 32 10 33 13 40 1e 3a |
08:53:19.424 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.424 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.463 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.477 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:19.501 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:19.501 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:19.523 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.529 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:19.529 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 78 9a 40 2c 4b 32 60 18 68 00 f0 76 ff |
08:53:19.577 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.590 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:19.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:19.615 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:19.638 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.638 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.649 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:19.649 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 84 02 22 2e 00 01 38 e8 60 6b 68 18 36 |
08:53:19.693 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.708 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:19.731 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:19.731 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:19.754 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.755 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:19.755 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 90 13 43 6b 60 6b 68 28 00 93 43 6b 60 |
08:53:19.801 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:19.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:19.838 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:19.849 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:19.849 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 9c e3 1d d9 7f 23 4a 8b 00 f3 18 1a 60 |
08:53:19.860 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.900 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:19.937 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:19.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:19.940 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:19.940 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef a8 03 22 fe f7 45 fc 03 9b 9b 00 f6 18 |
08:53:19.959 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:19.999 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:19.999 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:20.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:20.040 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:20.043 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:20.043 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef b4 1f 4b 33 60 ab 60 eb 6b 02 9e 02 9a |
08:53:20.063 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.103 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.117 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:20.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:20.140 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:20.157 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:20.157 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef c0 1e 40 13 42 f9 d1 e0 21 20 6a c9 01 |
08:53:20.165 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.205 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:20.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:20.243 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:20.245 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:20.245 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef cc ff f7 b0 f9 19 49 e0 69 ff f7 ac f9 |
08:53:20.265 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.305 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:20.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:20.343 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:20.349 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:20.349 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef d8 01 23 01 9a 53 64 16 64 05 b0 f0 bd |
08:53:20.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.365 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.405 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:20.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:20.442 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:20.446 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:20.446 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef e4 1a 00 58 32 97 42 05 d1 c4 22 92 00 |
08:53:20.467 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.467 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.507 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.507 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.521 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:20.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:20.545 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:20.548 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:20.549 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef f0 b3 58 12 49 0b 40 a0 e7 1a 00 30 32 |
08:53:20.568 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.568 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.622 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:20.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:20.651 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:20.661 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:20.661 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef fc 97 42 04 d1 |
08:53:20.673 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.673 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.702 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.702 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:20.740 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:20.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:20.741 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:20.743 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5B00 with 256 bytes and CRC32 0x5D36DD40 |
08:53:20.743 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ee 00 01 00 5b 00 00 40 dd 36 5d |
08:53:20.762 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.762 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.797 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:20.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:20.835 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:20.837 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 64,7% |
08:53:20.839 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 00 c4 22 92 00 b3 58 0e 49 f4 e7 60 33 |
08:53:20.857 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.857 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.897 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:20.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:20.934 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:20.936 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:20.936 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 0c 9f 42 95 d1 c4 22 92 00 b3 58 1b 02 |
08:53:20.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:20.996 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:20.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.010 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:21.036 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:21.036 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:21.050 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:21.050 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 18 1b 0a 8e e7 00 e1 00 e0 08 02 00 10 |
08:53:21.062 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.099 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:21.136 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:21.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:21.157 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.158 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.159 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:21.159 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 24 b8 01 00 10 40 42 0f 00 e0 00 00 10 |
08:53:21.204 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:21.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:21.241 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:21.264 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.299 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:21.299 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 30 50 14 00 00 ff ff 00 00 20 20 00 00 |
08:53:21.343 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.357 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:21.380 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:21.381 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:21.382 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:21.382 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 3c ff 00 ff ff ff ff 00 ff 10 b5 83 8a |
08:53:21.402 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.442 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:21.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:21.480 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:21.502 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.527 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:21.533 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 48 04 00 00 2b 03 d1 03 68 07 49 db 68 |
08:53:21.581 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.581 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:21.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:21.615 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:21.637 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.637 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.677 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:21.677 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 54 98 47 20 00 ff f7 40 ff 23 00 01 22 |
08:53:21.722 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.722 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:21.759 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:21.759 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:21.762 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:21.762 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 60 5c 33 1a 70 03 4b 1b 6a 63 66 23 23 |
08:53:21.782 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.822 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:21.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:21.861 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:21.883 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.912 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:21.912 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 6c 23 66 10 bd ff ff 00 00 b8 01 00 10 |
08:53:21.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:21.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:21.970 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:21.993 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:21.996 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:22.011 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:22.011 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 78 f7 b5 01 93 03 68 04 00 db 68 00 6d |
08:53:22.020 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.058 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.072 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:22.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:22.096 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:22.119 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.119 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.145 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:22.146 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 84 00 93 03 68 15 00 db 6e 0e 00 98 47 |
08:53:22.190 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.204 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:22.228 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:22.228 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:22.251 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.255 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:22.255 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 90 07 78 20 6d 3f 02 03 68 db 6e 98 47 |
08:53:22.300 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.314 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:22.337 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:22.337 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:22.362 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:22.362 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 9c 41 78 00 9b 39 43 20 00 98 47 2e 22 |
08:53:22.363 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.407 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:22.444 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:22.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:22.459 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:22.459 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef a8 63 6b 00 27 1a 75 60 6b 03 68 5b 69 |
08:53:22.470 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:22.546 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:22.549 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:22.571 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.588 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:22.588 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef b4 98 47 01 22 07 70 63 6b 5a 75 20 6d |
08:53:22.633 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:22.672 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:22.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:22.673 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:22.673 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef c0 03 68 9b 6c 98 47 ff 23 03 70 20 6d |
08:53:22.694 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.694 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.734 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.734 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.748 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:22.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:22.771 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:22.774 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:22.774 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef cc 03 68 5b 6c 98 47 07 70 20 6d 03 68 |
08:53:22.797 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.835 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:22.872 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:22.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:22.878 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:22.880 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef d8 1b 6a 98 47 33 12 03 70 20 6d 03 68 |
08:53:22.894 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.933 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:22.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:22.971 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:22.971 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:22.973 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:22.973 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef e4 5b 6a 98 47 06 70 20 6d 03 68 9b 6a |
08:53:22.993 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:22.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.032 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.047 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:23.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:23.070 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:23.072 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:23.072 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef f0 98 47 2b 12 03 70 20 6d 03 68 db 6a |
08:53:23.093 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.093 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.132 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.150 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:23.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:23.169 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:23.172 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:23.173 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef fc 98 47 05 70 |
08:53:23.192 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.221 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:23.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:23.259 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:23.268 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:23.269 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5C00 with 256 bytes and CRC32 0xA5DBE4A3 |
08:53:23.270 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ee 00 01 00 5c 00 00 a3 e4 db a5 |
08:53:23.282 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.282 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.318 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:23.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:23.356 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:23.358 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 66,1% |
08:53:23.359 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 00 20 6d 03 68 1b 6b 98 47 01 9b 03 70 |
08:53:23.379 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.420 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:23.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:23.458 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:23.467 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:23.467 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 0c 23 6d 1f 75 9f 61 f7 bd 10 b5 04 00 |
08:53:23.479 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.480 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.520 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.520 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:23.557 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:23.557 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:23.558 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:23.559 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 18 ff f7 ae ff 20 00 ff f7 91 ff 10 bd |
08:53:23.580 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.580 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.620 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:23.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:23.658 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:23.661 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:23.661 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 24 10 b5 04 00 78 21 01 f0 7f f8 20 00 |
08:53:23.681 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.681 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.721 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:23.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:23.758 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:23.761 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:23.761 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 30 10 bd 10 b5 04 00 43 1d da 7f 00 2a |
08:53:23.782 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.822 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:23.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:23.863 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:23.885 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.890 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:23.890 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 3c fc d1 01 32 da 77 0f 23 e1 69 a0 69 |
08:53:23.934 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:23.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:23.972 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:23.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:23.974 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:23.974 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 48 4a 79 1a 40 07 32 01 f0 56 f8 20 00 |
08:53:23.993 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:23.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.033 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.048 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:24.071 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:24.071 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:24.097 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.097 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.084 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:24.116 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 54 fd f7 e6 ff 10 bd 70 b5 03 79 04 00 |
08:53:24.160 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.175 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:24.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:24.198 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:24.221 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.285 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:24.286 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 60 00 2b 39 d0 43 79 00 2b 36 d0 1d 4d |
08:53:24.332 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:24.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:24.378 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:24.400 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.400 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.455 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:24.455 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 6c c2 68 2b 6a 9b 1a 1c 4a 93 42 01 d9 |
08:53:24.499 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:24.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:24.542 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:24.564 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.564 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.630 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:24.630 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 78 fe f7 ed f8 63 79 01 2b 13 d1 a3 1d |
08:53:24.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.690 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:24.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:24.713 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:24.716 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:24.716 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 84 da 7f 02 2a 26 d1 da 7f d1 b2 02 2a |
08:53:24.739 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.777 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.791 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:24.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:24.814 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:24.817 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:24.817 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 90 22 d1 01 32 61 71 20 00 da 77 ff f7 |
08:53:24.840 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.840 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.878 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.878 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:24.915 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:24.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:24.938 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:24.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:24.961 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:24.961 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 9c ca ff 00 23 a3 72 2b 6a 23 61 2b 6a |
08:53:25.005 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.005 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:25.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:25.048 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:25.069 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.098 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:25.098 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef a8 e3 60 63 79 02 2b 13 d1 22 69 2b 6a |
08:53:25.142 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:25.180 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:25.183 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:25.204 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.225 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:25.225 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef b4 9b 1a 0c 4a 93 42 0d d9 0a 23 e3 56 |
08:53:25.270 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:25.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:25.308 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:25.334 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.334 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.367 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:25.367 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef c0 20 00 02 2b 09 dc ff f7 b4 ff a3 7a |
08:53:25.413 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:25.450 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:25.450 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:25.458 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:25.458 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef cc 01 33 a3 72 2b 6a 23 61 2b 6a e3 60 |
08:53:25.472 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.472 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.512 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.512 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.526 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:25.549 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:25.549 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:25.570 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:25.571 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef d8 70 bd fe f7 bc f8 fb e7 b8 01 00 10 |
08:53:25.571 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:25.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:25.652 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:25.660 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:25.660 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef e4 6f 17 00 00 b7 0b 00 00 f0 b5 04 00 |
08:53:25.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.715 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.730 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:25.753 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:25.753 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:25.761 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:25.761 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef f0 85 b0 ff f7 b2 ff a3 6a 1a 00 2c 32 |
08:53:25.775 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.815 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:25.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:25.852 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:25.875 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.915 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:25.916 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef fc 99 68 10 78 |
08:53:25.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:25.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:25.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:25.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:25.988 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:26.009 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:26.010 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.056 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5D00 with 256 bytes and CRC32 0x0B56C42D |
08:53:26.102 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ee 00 01 00 5d 00 00 2d c4 56 0b |
08:53:26.146 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.157 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:26.180 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:26.180 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:26.182 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 67,5% |
08:53:26.182 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 01 28 02 d0 12 78 06 2a 38 d1 da 6c |
08:53:26.202 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.202 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.242 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.258 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:26.279 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:26.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:26.298 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:26.298 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c 00 2a 35 d1 00 29 33 d0 62 6b 12 7d |
08:53:26.305 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.344 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.344 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:26.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:26.381 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:26.403 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:26.403 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 18 52 07 2f d5 c0 20 5d 68 9b 68 2a 79 |
08:53:26.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.448 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:26.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:26.486 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:26.490 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:26.491 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 24 db b2 02 93 eb 78 12 02 1a 43 ab 79 |
08:53:26.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.548 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:26.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:26.585 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:26.608 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.625 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:26.626 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 30 ee 79 19 02 80 00 01 40 0e 43 f0 21 |
08:53:26.671 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:26.708 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:26.708 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:26.711 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:26.711 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 3c a0 27 89 00 31 40 bf 00 b9 42 0a d0 |
08:53:26.731 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.731 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.787 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:26.809 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:26.813 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:26.818 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:26.818 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 48 00 dd 72 e0 08 00 80 27 81 38 ff 38 |
08:53:26.835 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.875 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:26.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:26.912 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:26.932 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:26.933 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 54 b8 43 80 b2 00 28 00 d0 6c e0 8e b2 |
08:53:26.938 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.980 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:26.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:26.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:27.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:27.016 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:27.018 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:27.018 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 60 00 2a 00 d0 6a e0 23 68 2a 00 9f 69 |
08:53:27.038 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.038 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.077 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.078 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:27.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:27.115 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:27.130 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:27.130 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 6c 31 00 20 00 02 9b b8 47 23 68 20 00 |
08:53:27.141 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.141 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.180 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.180 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:27.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:27.218 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:27.224 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:27.224 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 78 5b 6a 98 47 e0 6a 00 28 3e d0 c2 49 |
08:53:27.239 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.279 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:27.317 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:27.317 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:27.319 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:27.319 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 84 ff f7 54 f8 e1 6a c1 4d 4b 06 9b 0f |
08:53:27.339 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.339 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.379 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.393 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:27.417 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:27.417 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:27.419 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:27.419 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 90 9b 00 eb 18 58 6c 1f 23 0b 40 04 21 |
08:53:27.439 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.479 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.493 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:27.516 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:27.516 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:27.539 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.539 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.563 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:27.563 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 9c 99 40 09 58 a0 6c 4b 1e 99 41 bb 4b |
08:53:27.608 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.623 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:27.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:27.646 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:27.669 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.695 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:27.695 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef a8 62 6c 1b 6a 81 42 00 d1 85 e1 23 64 |
08:53:27.740 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:27.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:27.778 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:27.800 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.800 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.846 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:27.846 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef b4 a1 64 63 6c 00 2b 06 d1 00 2a 04 d0 |
08:53:27.892 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:27.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:27.929 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:27.940 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:27.940 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef c0 62 6b 7f 3b 11 7d 4b 40 13 75 c0 21 |
08:53:27.952 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:27.993 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:27.993 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:28.029 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:28.029 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:28.040 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:28.041 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef cc e0 6a c9 01 ff f7 2e f8 01 20 1f 23 |
08:53:28.052 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.052 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.092 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.106 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:28.130 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:28.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:28.151 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:28.151 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef d8 01 00 e2 6a 13 40 99 40 63 6b 52 06 |
08:53:28.154 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.202 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.202 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:28.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:28.236 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:28.253 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:28.253 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef e4 1b 7d 92 0f 03 40 20 6b 92 00 1b 1a |
08:53:28.262 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.262 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.299 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:28.336 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:28.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:28.359 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.360 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:28.360 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef f0 58 1e 83 41 ad 18 6a 6c 5b 42 0b 40 |
08:53:28.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:28.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:28.444 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:28.466 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.467 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.484 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:28.484 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef fc 89 00 8b 50 |
08:53:28.516 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.517 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.531 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:28.554 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:28.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:28.577 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.598 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:28.624 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5E00 with 256 bytes and CRC32 0x57E5AA8D |
08:53:28.674 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ee 00 01 00 5e 00 00 8d aa e5 57 |
08:53:28.713 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.733 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:28.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:28.751 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:28.754 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 69,0% |
08:53:28.758 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 00 a3 6a db 6c 00 2b 12 d1 22 00 4c 32 |
08:53:28.774 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.814 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:28.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:28.852 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:28.854 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:28.854 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 0c 12 78 00 2a 0d d0 62 79 00 2a 06 d0 |
08:53:28.875 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.915 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:28.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:28.957 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:28.980 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:28.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:28.985 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:28.985 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 18 e2 88 00 2a 03 d0 81 21 20 00 fd f7 |
08:53:29.031 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:29.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:29.069 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:29.092 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.129 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:29.129 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 24 fc ff 23 68 20 00 1b 6b 98 47 05 b0 |
08:53:29.173 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.188 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:29.211 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:29.211 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:29.213 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:29.213 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 30 f0 bd 81 42 00 d1 92 e7 b6 b2 91 e7 |
08:53:29.233 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.281 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.281 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.287 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:29.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:29.311 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:29.312 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:29.312 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 3c 69 79 52 ba 92 b2 7f 29 08 d9 02 99 |
08:53:29.332 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.372 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.372 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.386 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:29.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:29.410 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:29.413 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:29.413 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 48 23 68 00 91 5f 69 31 00 2b 00 20 00 |
08:53:29.433 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.473 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:29.510 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:29.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:29.518 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:29.518 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 54 b8 47 8d e7 a1 8a 91 42 00 d0 89 e7 |
08:53:29.532 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.533 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.572 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:29.610 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:29.611 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:29.614 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:29.614 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 60 3c 22 18 00 90 43 aa 78 69 78 12 02 |
08:53:29.635 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.635 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:29.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:29.713 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:29.723 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:29.723 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 6c 0a 43 57 ba 42 b2 b9 b2 00 2a 00 db |
08:53:29.735 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.775 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.790 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:29.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:29.813 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:29.816 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:29.816 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 78 8f e0 80 28 16 d0 81 28 3a d0 da 07 |
08:53:29.836 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.876 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.890 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:29.914 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:29.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:29.915 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:29.915 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 84 65 d4 62 79 01 2a 00 d8 72 e7 e2 88 |
08:53:29.936 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.936 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.975 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:29.975 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:29.989 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:30.013 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:30.013 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:30.015 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:30.015 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 90 8a 42 00 d0 6e e7 08 21 0f 20 61 56 |
08:53:30.038 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.038 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.074 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.074 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.089 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:30.112 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:30.112 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:30.129 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:30.129 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 9c 9b 08 03 40 8b 42 3d d0 20 00 fd f7 |
08:53:30.138 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.138 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.175 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.175 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:30.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:30.213 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:30.214 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:30.214 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef a8 d6 ff 63 e7 65 79 00 2d 12 d0 01 3d |
08:53:30.234 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.234 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.274 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:30.312 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:30.312 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:30.314 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:30.315 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef b4 01 2d 00 d9 5c e7 e3 88 8b 42 00 d1 |
08:53:30.335 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.375 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.389 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:30.412 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:30.412 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:30.434 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.434 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.458 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:30.458 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef c0 58 e7 74 4a 20 00 93 8c 01 33 93 84 |
08:53:30.504 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.504 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:30.541 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:30.541 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:30.543 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:30.543 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef cc 0a 00 00 23 81 21 fd f7 a4 ff 4d e7 |
08:53:30.563 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.602 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.617 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:30.640 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:30.640 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:30.646 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:30.646 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef d8 23 68 20 00 db 69 98 47 6c 4b e7 80 |
08:53:30.663 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.704 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.704 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.717 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:30.741 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:30.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:30.745 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:30.745 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef e4 1b 6a 25 81 e3 60 63 79 01 2b 00 d1 |
08:53:30.764 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.804 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:30.841 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:30.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:30.845 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:30.845 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef f0 40 e7 01 23 63 71 3d e7 63 79 20 68 |
08:53:30.864 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.904 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.919 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:30.942 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:30.942 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:30.965 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:30.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:30.968 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:30.968 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef fc 01 3b 01 2b |
08:53:31.002 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.002 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:31.041 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:31.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:31.043 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:31.044 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5F00 with 256 bytes and CRC32 0x0DD0893D |
08:53:31.044 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ee 00 01 00 5f 00 00 3d 89 d0 0d |
08:53:31.064 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.099 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.114 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:31.137 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:31.137 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:31.141 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 70,4% |
08:53:31.148 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 00 00 d9 37 e7 e3 88 8b 42 00 d0 33 e7 |
08:53:31.161 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.161 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.201 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.201 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:31.238 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:31.238 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:31.241 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:31.241 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 0c 00 23 61 4a 63 71 93 8c 01 33 93 84 |
08:53:31.260 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.260 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.300 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.314 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:31.338 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:31.338 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:31.344 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:31.344 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 18 c3 69 20 00 98 47 29 e7 00 26 5c 4b |
08:53:31.359 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.359 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.399 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:31.437 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:31.437 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:31.441 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:31.441 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 24 01 31 1b 6a 01 40 a7 1d 21 72 e3 60 |
08:53:31.461 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.462 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.498 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:31.536 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:31.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:31.552 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:31.552 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 30 e5 1d fe 77 eb 7f b3 42 db d0 21 6a |
08:53:31.560 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.598 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.598 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:31.637 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:31.637 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:31.660 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:31.660 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 3c 4a 79 02 40 07 32 e0 69 00 f0 db fe |
08:53:31.660 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.660 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.704 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.704 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:31.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:31.749 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:31.756 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:31.756 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 48 eb 7f db b2 fb 77 ee 77 cb e7 ff 2b |
08:53:31.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.812 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:31.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:31.850 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:31.861 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:31.862 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 54 00 d1 0d e7 62 79 00 2a 00 d1 09 e7 |
08:53:31.873 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.913 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.913 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:31.927 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:31.950 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:31.955 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:31.977 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:31.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.000 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:32.000 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 60 08 20 20 56 9b 06 1b 0f 83 42 00 d0 |
08:53:32.045 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.060 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:32.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:32.084 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:32.088 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:32.088 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 6c 02 e7 e3 88 8b 42 00 d0 fe e6 0a 23 |
08:53:32.108 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.108 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.148 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.148 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:32.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:32.185 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:32.202 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:32.202 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 78 e3 56 20 00 02 2b 92 dc 02 2a 90 d1 |
08:53:32.212 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.249 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.249 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:32.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:32.290 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:32.291 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:32.292 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 84 ff f7 55 fe a3 7a 01 33 a3 72 41 4b |
08:53:32.312 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.352 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.352 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:32.389 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:32.389 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:32.391 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:32.391 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 90 1a 6a 1b 6a 22 61 e3 60 ec e6 03 2b |
08:53:32.412 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.412 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.454 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.454 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:32.490 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:32.490 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:32.503 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:32.503 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 9c 21 d8 67 1d fb 7f 00 2b fc d1 0c 22 |
08:53:32.514 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.553 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.567 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:32.590 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:32.590 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:32.596 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:32.597 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef a8 01 33 fb 77 28 78 a3 69 10 40 5c 3a |
08:53:32.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.652 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:32.690 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:32.690 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:32.692 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:32.692 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef b4 02 43 1a 70 0a 0a 19 71 da 70 22 68 |
08:53:32.712 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.753 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.753 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.766 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:32.789 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:32.790 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:32.807 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:32.807 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef c0 00 93 13 6a 31 00 9c 46 2a 00 20 00 |
08:53:32.815 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.851 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:32.890 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:32.894 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:32.896 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:32.896 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef cc 65 46 02 9b a8 47 00 28 03 d0 20 00 |
08:53:32.916 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.916 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:32.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:32.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:32.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:32.994 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:33.006 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:33.006 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef d8 fd f7 24 fe ca e6 f8 77 c8 e6 e2 88 |
08:53:33.018 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.018 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.056 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.071 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:33.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:33.094 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:33.096 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:33.096 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef e4 8a 42 00 d0 c4 e6 61 79 00 29 00 d1 |
08:53:33.120 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.120 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.157 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.157 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.171 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:33.195 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:33.195 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:33.218 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.232 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:33.232 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef f0 c0 e6 9b 08 09 21 18 00 0f 27 61 56 |
08:53:33.277 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.291 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:33.315 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:33.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:33.320 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:33.320 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef fc 38 40 03 00 |
08:53:33.337 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.337 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.365 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.380 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:33.403 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:33.403 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:33.425 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.442 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:33.467 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6000 with 256 bytes and CRC32 0x1C25BE17 |
08:53:33.468 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ee 00 01 00 60 00 00 17 be 25 1c |
08:53:33.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:33.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:33.548 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:33.558 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 71,9% |
08:53:33.570 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 00 88 42 49 d1 c2 21 20 00 fd f7 09 ff |
08:53:33.580 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.580 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.618 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:33.656 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:33.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:33.663 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:33.663 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 0c 63 7a 01 33 3b 40 63 72 1f 4b 1b 6a |
08:53:33.679 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.718 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.732 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:33.756 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:33.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:33.766 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:33.766 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 18 e3 60 a3 1d db 7f 00 2b 2d d1 23 00 |
08:53:33.777 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.817 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:33.855 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:33.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:33.876 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.877 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.886 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:33.886 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 24 e7 69 25 33 03 93 01 23 03 9a 31 00 |
08:53:33.931 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:33.945 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:33.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:33.968 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:33.974 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:33.974 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 30 13 70 23 68 00 97 1b 6a 2a 00 9c 46 |
08:53:33.991 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:33.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.031 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:34.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:34.069 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:34.076 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:34.076 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 3c 20 00 66 46 02 9b b0 47 00 28 1e d0 |
08:53:34.092 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.132 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:34.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:34.169 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:34.190 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:34.190 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 48 0c 23 2a 78 1a 40 5c 3b 13 43 3b 70 |
08:53:34.192 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.236 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:34.273 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:34.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:34.280 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:34.280 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 54 e3 88 1a 0a 3b 71 08 23 fa 70 e2 69 |
08:53:34.296 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.336 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.350 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:34.374 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:34.374 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:34.376 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:34.377 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 60 e3 56 97 42 02 d0 0f 22 01 33 13 40 |
08:53:34.397 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.397 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.437 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.437 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.451 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:34.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:34.474 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:34.477 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:34.477 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 6c 3c 21 ba 79 9b 00 8a 43 13 43 40 22 |
08:53:34.497 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.537 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.552 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:34.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:34.575 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:34.587 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:34.588 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 78 13 43 bb 71 7a e6 23 00 27 6a 26 33 |
08:53:34.599 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.599 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.637 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.638 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:34.675 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:34.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:34.685 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:34.685 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 84 d0 e7 03 9b 18 70 73 e6 10 10 00 00 |
08:53:34.696 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.737 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.737 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:34.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:34.774 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:34.787 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:34.787 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 90 8c 71 00 00 b8 01 00 10 01 39 0f 4d |
08:53:34.797 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.836 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:34.874 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:34.874 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:34.897 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.899 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:34.899 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 9c 39 40 88 42 08 d1 c2 21 20 00 fd f7 |
08:53:34.944 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:34.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:34.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:34.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:34.981 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:34.983 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:34.984 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef a8 ba fe eb 8c 01 33 eb 84 2b 6a 70 e7 |
08:53:35.004 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.044 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:35.081 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:35.081 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:35.093 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:35.093 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef b4 c3 21 20 00 fd f7 b1 fe f8 e7 20 6c |
08:53:35.109 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.109 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.145 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:35.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:35.186 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:35.188 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:35.188 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef c0 00 28 00 d1 77 e6 1b 1a 32 2b 00 d5 |
08:53:35.211 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.211 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.248 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:35.285 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:35.285 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:35.295 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:35.295 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef cc 73 e6 00 23 61 64 23 64 6f e6 c0 46 |
08:53:35.308 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.348 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.348 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:35.391 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:35.391 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:35.404 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:35.404 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef d8 b8 01 00 10 f0 b5 03 79 05 00 87 b0 |
08:53:35.415 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.415 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.453 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.453 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:35.491 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:35.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:35.492 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:35.492 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef e4 00 2b 00 d1 da e0 ff f7 ff fd ab 6a |
08:53:35.513 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.552 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.567 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:35.590 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:35.590 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:35.592 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:35.592 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef f0 db 6c 00 2b 00 d0 d3 e0 2b 00 5c 33 |
08:53:35.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.652 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.653 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:35.689 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:35.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:35.695 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:35.695 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef fc 1b 78 00 2b |
08:53:35.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.739 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:35.778 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:35.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:35.779 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:35.785 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6100 with 256 bytes and CRC32 0xDC07F525 |
08:53:35.785 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ee 00 01 00 61 00 00 25 f5 07 dc |
08:53:35.801 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.802 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.837 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:35.875 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:35.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:35.877 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 73,3% |
08:53:35.877 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 00 00 d1 b7 e0 2b 68 28 00 db 6a 98 47 |
08:53:35.897 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:35.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:35.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:35.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:35.977 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:35.979 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:35.980 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 0c 00 28 00 d1 b0 e0 67 4b 6a 6e 1b 6a |
08:53:35.999 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.040 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:36.077 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:36.077 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:36.100 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.115 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:36.116 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 18 9b 1a 2a 6e 93 42 00 d2 9c e0 ec 6b |
08:53:36.160 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:36.197 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:36.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:36.216 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:36.217 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 24 23 68 20 00 5b 69 98 47 00 90 00 28 |
08:53:36.223 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.261 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:36.299 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:36.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:36.311 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:36.311 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 30 00 d1 93 e0 23 68 20 00 1b 69 98 47 |
08:53:36.324 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.324 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.364 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.378 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:36.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:36.401 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:36.425 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.439 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:36.439 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 3c 03 78 01 93 00 2b 00 d1 8a e0 20 69 |
08:53:36.485 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.497 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:36.528 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:36.528 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:36.553 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.602 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:36.602 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 48 19 00 00 f0 81 fd 21 61 8f b2 bb b2 |
08:53:36.646 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:36.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:36.685 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:36.687 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:36.687 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 54 03 93 01 9b ba b2 93 42 03 d8 23 69 |
08:53:36.707 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.707 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.747 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.762 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:36.785 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:36.785 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:36.807 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.808 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.856 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:36.856 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 60 01 33 23 61 7a e0 23 68 39 00 9b 68 |
08:53:36.900 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.901 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:36.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:36.938 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:36.961 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:36.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:36.974 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:36.974 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 6c 20 00 98 47 03 78 02 93 63 68 98 6b |
08:53:37.018 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:37.056 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:37.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:37.066 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:37.066 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 78 03 68 9b 68 98 47 06 00 03 78 01 36 |
08:53:37.079 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.119 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.119 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.133 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:37.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:37.156 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:37.178 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.191 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:37.191 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 84 5b 00 c3 18 04 93 04 9b b3 42 1d d9 |
08:53:37.239 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:37.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:37.274 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:37.297 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.297 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.319 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:37.319 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 90 73 78 9f 42 1c d1 33 78 01 33 05 93 |
08:53:37.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:37.403 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:37.403 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:37.424 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:37.424 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 9c 63 68 98 6b 03 68 db 68 98 47 05 9b |
08:53:37.430 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.469 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.469 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:37.506 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:37.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:37.528 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.528 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.542 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:37.542 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef a8 83 42 11 d8 63 68 98 6b 03 68 5b 68 |
08:53:37.586 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.601 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:37.624 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:37.626 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:37.628 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:37.628 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef b4 98 47 33 78 5b 00 c0 18 82 78 43 78 |
08:53:37.648 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.688 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.688 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:37.725 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:37.726 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:37.728 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:37.728 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef c0 12 02 1a 43 52 ba 92 b2 00 2a 03 d1 |
08:53:37.749 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.789 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.789 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.803 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:37.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:37.826 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:37.849 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.857 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:37.857 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef cc 01 37 c0 e7 02 36 da e7 44 21 02 9b |
08:53:37.902 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.903 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:37.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:37.940 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:37.940 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:37.944 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:37.944 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef d8 0b 40 8b 42 f6 d1 01 20 03 9b 00 99 |
08:53:37.963 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:37.963 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.003 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.003 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:38.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:38.041 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:38.042 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:38.044 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef e4 5b 08 c9 18 02 91 00 99 c9 5c 03 9b |
08:53:38.063 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.103 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.117 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:38.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:38.142 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:38.144 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:38.144 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef f0 03 42 00 d0 09 09 cb 43 9b 07 e7 d1 |
08:53:38.164 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.204 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:38.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:38.242 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:38.245 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:38.245 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef fc 04 20 0b 00 |
08:53:38.265 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.293 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:38.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:38.346 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:38.349 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:38.369 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.375 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6200 with 256 bytes and CRC32 0x78B0E7F3 |
08:53:38.375 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ee 00 01 00 62 00 00 f3 e7 b0 78 |
08:53:38.415 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.415 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:38.453 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:38.453 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:38.454 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 74,7% |
08:53:38.454 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 00 03 40 01 42 4e d0 63 68 59 1d c8 7f |
08:53:38.476 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.515 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.515 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:38.552 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:38.552 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:38.569 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:38.569 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 0c c6 b2 00 28 fb d1 01 30 c8 77 bc 21 |
08:53:38.577 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.614 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.614 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.628 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:38.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:38.652 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:38.655 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:38.655 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 18 9b 69 19 70 1a 71 11 0a e1 22 d9 70 |
08:53:38.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.716 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.730 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:38.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:38.752 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:38.754 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:38.754 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 24 5a 71 9e 71 de 71 60 68 fd f7 fa fc |
08:53:38.774 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.814 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:38.851 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:38.852 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:38.854 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:38.854 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 30 63 68 e7 60 9b 6a 1e 75 04 23 07 21 |
08:53:38.875 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.914 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:38.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:38.952 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:38.974 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:38.975 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:38.992 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:38.992 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 3c ba 00 1a 40 91 40 02 9b 01 37 1b 78 |
08:53:39.038 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.038 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.053 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:39.075 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:39.080 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:39.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.114 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:39.114 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 48 8b 43 01 21 91 40 02 9a 0b 43 13 70 |
08:53:39.160 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:39.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:39.198 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:39.202 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:39.202 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 54 16 4b 27 61 1b 6a 6b 66 fa 21 14 4a |
08:53:39.221 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.261 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.275 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:39.299 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:39.298 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:39.320 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.343 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:39.343 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 60 6b 6e 12 6a c9 00 d2 1a 8a 42 03 d3 |
08:53:39.388 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.403 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:39.426 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:39.439 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:39.463 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.470 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:39.470 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 6c fa 22 92 00 9b 18 6b 66 2b 6d 1b 7d |
08:53:39.514 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:39.552 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:39.552 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:39.554 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:39.554 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 78 00 2b 11 d0 ac 6a 20 00 fd f7 48 f9 |
08:53:39.576 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:39.661 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:39.661 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:39.676 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:39.676 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 84 00 28 0b d0 a3 68 00 2b 08 d1 6b 79 |
08:53:39.685 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.723 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.723 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.738 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:39.761 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:39.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:39.767 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:39.767 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 90 00 2b 05 d1 06 4b 02 21 28 00 1b 6a |
08:53:39.782 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.825 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.825 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:39.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:39.862 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:39.867 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:39.868 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 9c ff f7 24 f9 07 b0 f0 bd 39 00 20 00 |
08:53:39.885 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.924 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.924 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:39.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:39.961 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:39.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:39.967 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:39.967 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef a8 fd f7 f5 fc c4 e7 c0 46 b8 01 00 10 |
08:53:39.983 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:39.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.024 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.038 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:40.061 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:40.061 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:40.083 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:40.083 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef b4 f7 b5 1f 00 03 68 0d 00 db 69 04 00 |
08:53:40.088 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.088 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.127 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:40.165 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:40.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:40.184 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:40.185 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef c0 16 00 98 47 a8 42 04 d1 01 2f 02 d1 |
08:53:40.199 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.232 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.232 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.245 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:40.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:40.269 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:40.283 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:40.283 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef cc 33 78 23 75 f7 bd 63 68 20 00 ed 1a |
08:53:40.293 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.293 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.332 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:40.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:40.369 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:40.389 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:40.389 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef d8 23 68 db 69 98 47 a8 42 08 d3 7b 19 |
08:53:40.395 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.395 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.433 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.447 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:40.471 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:40.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:40.474 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:40.474 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef e4 01 93 23 68 20 00 db 69 98 47 7b 19 |
08:53:40.493 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.493 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.533 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.533 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:40.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:40.571 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:40.573 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:40.573 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef f0 83 42 10 d2 20 69 3a 00 31 00 40 19 |
08:53:40.594 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.634 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:40.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:40.671 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:40.689 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:40.690 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef fc 00 f0 ff fc |
08:53:40.697 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.724 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.738 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:40.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:40.761 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:40.783 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:40.785 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.804 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6300 with 256 bytes and CRC32 0xB49F40E7 |
08:53:40.817 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ee 00 01 00 63 00 00 e7 40 9f b4 |
08:53:40.860 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:40.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:40.896 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:40.898 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 76,2% |
08:53:40.903 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 00 e6 e7 23 68 20 00 db 69 98 47 33 78 |
08:53:40.923 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.959 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:40.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:40.973 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:40.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:40.997 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:41.004 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:41.004 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 0c a8 42 06 d1 23 75 01 36 01 35 01 9b |
08:53:41.020 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.059 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.060 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.074 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:41.101 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:41.101 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:41.105 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:41.105 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 18 ab 42 f2 d1 d8 e7 22 69 53 55 f6 e7 |
08:53:41.125 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.126 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.165 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.180 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:41.203 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:41.205 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:41.207 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:41.207 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 24 f0 b5 85 b0 01 93 03 68 0e 00 db 69 |
08:53:41.227 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.281 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:41.304 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:41.305 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:41.306 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:41.306 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 04 00 17 00 98 47 b0 42 06 d1 01 9b |
08:53:41.326 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.326 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.368 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.368 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:41.404 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:41.406 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:41.408 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:41.408 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 3c 01 2b 03 d1 23 7d 3b 70 05 b0 f0 bd |
08:53:41.429 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.469 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.482 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:41.506 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:41.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:41.508 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:41.508 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 48 63 68 20 00 f5 1a 03 93 23 68 db 69 |
08:53:41.527 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.528 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.575 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.582 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:41.605 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:41.605 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:41.608 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:41.608 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 54 98 47 a8 42 09 d3 01 9b 20 00 5b 19 |
08:53:41.628 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.628 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.668 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.683 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:41.706 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:41.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:41.708 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:41.708 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 60 02 93 23 68 db 69 98 47 02 9b 83 42 |
08:53:41.728 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.728 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.767 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:41.805 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:41.805 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:41.807 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:41.807 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 6c 12 d2 21 69 38 00 01 9a 49 19 00 f0 |
08:53:41.827 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.36->13/3/0 L_Data.ind, low priority hop count 6, tpdu 00 80 00 00 |
08:53:41.892 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:41.927 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:41.936 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:41.937 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:41.937 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 78 c2 fc e3 e7 23 68 20 00 db 69 98 47 |
08:53:41.958 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:41.998 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:41.998 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.012 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:42.035 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:42.035 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:42.053 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:42.053 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 84 a8 42 09 d1 22 7d 03 9b 9b 1b fb 18 |
08:53:42.061 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.061 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.098 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.098 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.112 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:42.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:42.136 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:42.159 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.206 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:42.206 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 90 5a 55 01 35 02 9b ab 42 f0 d1 d3 e7 |
08:53:42.251 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:42.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:42.289 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:42.291 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:42.291 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 9c 23 69 5a 5d f3 e7 f0 b5 89 b0 06 00 |
08:53:42.311 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.312 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.351 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.352 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:42.389 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:42.390 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:42.407 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:42.407 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef a8 0c 00 1d 00 18 1e 06 92 51 d0 4b 1e |
08:53:42.416 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.457 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.457 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.467 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:42.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:42.491 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:42.513 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.539 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:42.539 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef b4 5b 19 00 20 04 93 99 42 4b d8 70 6d |
08:53:42.584 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.584 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.597 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:42.621 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:42.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:42.625 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:42.625 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef c0 00 28 0c d0 03 68 21 00 9b 68 98 47 |
08:53:42.644 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.644 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.683 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.684 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:42.721 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:42.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:42.730 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:42.730 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef cc 05 90 70 6d 04 99 03 68 9b 68 98 47 |
08:53:42.746 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.746 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.783 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:42.821 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:42.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:42.844 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.844 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.854 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:42.854 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef d8 05 9b 00 2b 1d d1 06 9b 03 93 01 23 |
08:53:42.898 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.898 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:42.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:42.935 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:42.937 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:42.937 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef e4 05 93 30 6d 21 00 03 68 04 9a 1b 69 |
08:53:42.957 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:42.997 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:42.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:43.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:43.035 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:43.051 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:43.052 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef f0 98 47 00 28 64 d0 21 00 30 00 04 9d |
08:53:43.060 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.060 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.097 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.097 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:43.137 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:43.137 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:43.148 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:43.148 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef fc fd f7 38 fa |
08:53:43.162 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.191 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.191 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:43.229 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:43.229 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:43.235 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:43.251 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.269 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6400 with 256 bytes and CRC32 0xB154D91B |
08:53:43.272 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ee 00 01 00 64 00 00 1b d9 54 b1 |
08:53:43.313 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.327 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:43.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:43.351 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:43.354 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 77,6% |
08:53:43.354 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 00 0e 9b 01 35 1b 78 2d 1b 2a 00 00 2b |
08:53:43.374 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.418 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.418 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:43.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:43.452 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:43.476 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.492 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:43.492 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 0c 4d d0 01 00 03 98 00 f0 74 fc 01 20 |
08:53:43.536 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:43.574 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:43.574 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:43.597 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.597 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.633 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:43.633 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 18 1d e0 00 28 0b d1 27 00 2b 19 07 93 |
08:53:43.677 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:43.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:43.715 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:43.724 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:43.730 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 24 06 9b 1b 1b db 19 03 93 07 9b bb 42 |
08:53:43.740 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.776 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.796 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:43.814 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:43.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:43.826 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:43.826 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 30 19 d1 1c 00 d7 e7 0e 9a 70 6d 12 78 |
08:53:43.838 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.877 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.877 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:43.915 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:43.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:43.925 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:43.925 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 3c 03 68 00 2a 0b d0 00 22 00 92 5e 68 |
08:53:43.938 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.977 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:43.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:43.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:44.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:44.018 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:44.019 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:44.019 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 48 21 00 2b 00 06 9a b0 47 43 42 58 41 |
08:53:44.039 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.080 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.080 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:44.119 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:44.119 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:44.142 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:44.143 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.143 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.143 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 54 c0 b2 09 b0 f0 bd 1e 68 21 00 2b 00 |
08:53:44.189 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:44.226 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:44.229 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:44.232 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:44.232 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 60 06 9a b0 47 f4 e7 70 6d 39 00 03 68 |
08:53:44.251 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.291 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:44.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:44.332 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:44.350 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:44.350 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 6c 9b 68 98 47 00 28 0e d0 0e 9a 70 6d |
08:53:44.359 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.395 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.395 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.409 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:44.432 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:44.432 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:44.454 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:44.454 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 78 12 78 03 68 00 2a 0e d0 00 22 00 92 |
08:53:44.461 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.498 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:44.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:44.536 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:44.545 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:44.545 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 84 5d 68 39 00 01 23 03 9a a8 47 00 28 |
08:53:44.558 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.558 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.599 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.599 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:44.635 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:44.635 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:44.642 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:44.642 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 90 01 d0 3c 00 a7 e7 00 23 01 37 05 93 |
08:53:44.658 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.658 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.698 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:44.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:44.742 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:44.752 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:44.752 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 9c c2 e7 1d 68 39 00 01 23 03 9a a8 47 |
08:53:44.765 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.765 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.806 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:44.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:44.844 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:44.846 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:44.846 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef a8 f1 e7 03 99 00 f0 27 fc 01 23 32 6d |
08:53:44.867 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.867 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.906 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.921 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:44.943 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:44.943 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:44.965 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:44.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:44.973 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:44.973 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef b4 13 75 43 4b 1b 6a 32 33 93 61 aa e7 |
08:53:45.020 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.035 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:45.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:45.056 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:45.081 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.109 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:45.109 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef c0 30 6d 21 00 03 68 db 68 98 47 00 28 |
08:53:45.154 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:45.191 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:45.201 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:45.223 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.272 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:45.272 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef cc 16 d0 33 6d 21 00 30 00 9d 68 fd f7 |
08:53:45.316 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.317 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:45.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:45.354 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:45.379 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.397 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:45.397 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef d8 cb f9 0e 9b 01 35 1b 78 2f 1b 3a 00 |
08:53:45.443 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:45.480 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:45.480 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:45.502 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.521 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:45.521 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef e4 00 2b 1e d0 01 00 03 98 00 f0 07 fc |
08:53:45.565 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:45.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:45.603 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:45.624 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:45.624 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef f0 03 9b 2c 00 db 19 03 93 00 23 05 93 |
08:53:45.630 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.668 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:45.706 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:45.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:45.729 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.754 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:45.754 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef fc 70 6b 21 00 |
08:53:45.786 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:45.825 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:45.825 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:45.847 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.853 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:45.861 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6500 with 256 bytes and CRC32 0x41AA2A2F |
08:53:45.863 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ee 00 01 00 65 00 00 2f 2a aa 41 |
08:53:45.904 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:45.918 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:45.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:45.941 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:45.944 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 79,0% |
08:53:45.955 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 00 03 68 04 9a 1b 69 98 47 00 28 17 d0 |
08:53:45.965 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:45.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.003 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.003 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:46.040 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:46.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:46.062 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.077 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:46.077 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 0c 0e 9a 04 9b 12 78 01 33 70 6b 1b 1b |
08:53:46.089 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 04 38 |
08:53:46.128 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:46.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:46.165 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:46.168 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:46.168 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 18 00 2a 3d d1 21 00 03 9a ff f7 c8 fe |
08:53:46.188 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.188 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.228 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.228 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:46.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:46.266 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:46.276 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:46.276 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 24 77 e7 03 99 00 f0 e9 fb 01 23 32 6d |
08:53:46.289 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.329 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:46.366 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:46.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:46.374 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:46.374 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 30 13 75 24 4b 1b 6a 32 33 93 61 d9 e7 |
08:53:46.389 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.389 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.431 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.431 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:46.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:46.466 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:46.490 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.490 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 0c 38 |
08:53:46.538 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:46.538 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 3c 70 6b 03 68 db 69 98 47 84 42 06 d1 |
08:53:46.583 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.597 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:46.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:46.621 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:46.623 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:46.623 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 48 70 6b 03 68 db 69 98 47 04 9b 83 42 |
08:53:46.646 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.687 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:46.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:46.721 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:46.739 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:46.739 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 54 da d0 70 6b 21 00 03 68 db 68 98 47 |
08:53:46.748 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.748 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.785 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.785 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:46.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:46.822 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:46.832 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:46.832 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 60 00 28 24 d0 70 6b 85 68 6b 1c 05 93 |
08:53:46.845 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.886 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:46.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:46.923 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:46.937 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:46.937 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 6c 1f 1b 0e 9b 1b 78 00 2b 15 d0 3b 00 |
08:53:46.948 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:46.986 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:46.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:47.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:47.024 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:47.035 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:47.035 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 78 21 00 03 9a ff f7 d2 fe 03 9b 05 9c |
08:53:47.047 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.047 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.087 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.101 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:47.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:47.124 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:47.129 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:47.129 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 84 db 19 03 93 04 9b 5d 1b 04 9b a3 42 |
08:53:47.146 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.186 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.186 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.200 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:47.223 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:47.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:47.225 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:47.225 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 90 13 d3 03 9b 06 93 12 e7 21 00 03 9a |
08:53:47.245 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.245 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.285 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.285 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:47.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:47.323 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:47.326 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:47.326 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 9c ff f7 c2 fe 39 e7 3b 00 21 00 03 9a |
08:53:47.347 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.384 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:47.422 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:47.422 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:47.437 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:47.438 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef a8 ff f7 84 fe e8 e7 04 9b 5d 1c 05 9b |
08:53:47.447 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.447 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.486 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:47.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:47.530 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:47.535 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:47.535 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef b4 2d 1b 00 2b e8 d0 6b 42 5d 41 e8 b2 |
08:53:47.553 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.593 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:47.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:47.640 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:47.658 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:47.658 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef c0 49 e7 c0 46 b8 01 00 10 30 b5 0f 24 |
08:53:47.666 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.703 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:47.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:47.740 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:47.743 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:47.743 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef cc 00 25 85 b0 6c 44 25 70 00 94 ff f7 |
08:53:47.766 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.766 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.804 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:47.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:47.841 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:47.843 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:47.843 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef d8 e4 fe 05 b0 30 bd 30 b5 0f 24 01 25 |
08:53:47.863 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.863 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.903 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.903 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:47.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:47.948 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:47.970 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:47.970 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:47.998 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:47.998 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef e4 85 b0 6c 44 25 70 00 94 ff f7 d9 fe |
08:53:48.044 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:48.081 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:48.081 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:48.105 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.105 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.114 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:48.114 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef f0 05 b0 30 bd 80 b5 00 af 01 4b 18 00 |
08:53:48.159 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:48.197 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:48.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:48.218 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.223 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:48.223 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef fc bd 46 80 bd |
08:53:48.255 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:48.293 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:48.293 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:48.316 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.316 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.333 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:48.368 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6600 with 256 bytes and CRC32 0xD499E902 |
08:53:48.395 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ee 00 01 00 66 00 00 02 e9 99 d4 |
08:53:48.435 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.435 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:48.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:48.476 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:48.479 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 80,5% |
08:53:48.498 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 00 c0 00 00 10 f0 b5 00 24 98 4a 99 4b |
08:53:48.500 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.543 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.555 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.558 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:48.581 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:48.581 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:48.603 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:48.603 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 0c 14 71 99 4a 01 21 1a 65 1a 00 58 32 |
08:53:48.604 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.604 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.648 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:48.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:48.685 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:48.710 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.710 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.721 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:48.721 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 18 11 71 97 4a 49 18 9a 65 1a 00 30 32 |
08:53:48.766 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.766 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.780 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:48.803 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:48.803 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:48.808 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:48.808 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 24 11 71 95 4a 01 31 1a 63 1a 00 60 32 |
08:53:48.826 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.865 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.865 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.880 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:48.902 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:48.902 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:48.925 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.925 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.925 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:48.926 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 30 11 71 93 4a 85 b0 1a 66 fa 22 92 4b |
08:53:48.973 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:48.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:48.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:49.008 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:49.008 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:49.019 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:49.019 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 3c 92 00 5a 60 91 4a 92 49 1a 60 92 48 |
08:53:49.034 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.074 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.074 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.088 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:49.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:49.113 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:49.136 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.175 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:49.175 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 48 ff 33 5c 76 fe f7 f0 fb 90 49 91 48 |
08:53:49.220 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:49.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:49.263 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:49.287 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.287 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.318 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:49.318 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 54 fe f7 ec fb 1c 20 00 f0 6b fb 81 23 |
08:53:49.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:49.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:49.408 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:49.431 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.431 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.446 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:49.447 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 60 5b 00 83 60 44 60 06 00 04 20 8c 4b |
08:53:49.492 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:49.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:49.531 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:49.560 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.566 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:49.566 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 6c ff 30 33 60 f0 60 8b 4d 00 f0 70 fb |
08:53:49.611 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:49.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:49.648 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:49.671 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.696 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:49.696 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 78 03 00 02 1d ff 32 1c 70 01 33 9a 42 |
08:53:49.742 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:49.780 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:49.780 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:49.788 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:49.788 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 84 fb d1 03 23 b3 61 2b 00 50 33 30 61 |
08:53:49.802 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.802 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.842 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.856 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:49.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:49.879 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:49.881 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:49.881 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 90 b4 82 33 60 20 20 80 24 00 f0 4c fb |
08:53:49.901 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.901 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.941 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:49.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:49.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:49.979 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:49.979 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:49.980 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:49.980 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 9c 81 4b 64 00 7c 35 83 60 44 60 c4 60 |
08:53:50.004 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.042 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:50.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:50.081 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:50.082 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:50.082 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef a8 05 60 07 00 20 00 00 f0 53 fb 00 22 |
08:53:50.105 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.106 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.142 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.157 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:50.180 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:50.195 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:50.197 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:50.197 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef b4 03 00 01 19 1a 70 01 33 99 42 fb d1 |
08:53:50.217 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.257 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:50.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:50.300 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:50.301 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:50.301 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef c0 38 61 3a 75 ba 61 38 00 fc 61 fd f7 |
08:53:50.322 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.361 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:50.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:50.399 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:50.402 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:50.402 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef cc e3 fc fa 68 01 1e 38 69 00 d1 c1 e0 |
08:53:50.425 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.463 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.478 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:50.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:50.500 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:50.502 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:50.502 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef d8 00 f0 11 fb 00 25 72 4b 18 20 3b 60 |
08:53:50.522 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.562 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:50.599 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:50.599 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:50.601 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:50.601 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef e4 3d 75 bd 61 00 f0 24 fb 6f 4b 01 90 |
08:53:50.621 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.661 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.661 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:50.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:50.698 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:50.706 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:50.706 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef f0 03 93 6f 4b 03 9a 83 60 01 23 5b 42 |
08:53:50.720 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.760 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.760 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:50.798 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:50.798 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:50.810 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:50.811 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef fc c3 60 6d 4b |
08:53:50.821 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.849 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:50.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:50.888 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:50.895 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:50.910 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:50.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:50.960 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6700 with 256 bytes and CRC32 0x85DD4A71 |
08:53:50.974 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ee 00 01 00 67 00 00 71 4a dd 85 |
08:53:51.015 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:51.053 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:51.063 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:51.068 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 81,9% |
08:53:51.071 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 00 42 60 03 60 05 61 45 61 08 20 6b 4c |
08:53:51.089 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.089 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.129 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.129 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.143 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:51.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:51.166 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:51.189 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.203 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:51.203 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 0c 00 f0 12 fb 6a 4b 03 99 03 60 6a 4b |
08:53:51.248 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.262 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:51.285 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:51.285 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:51.291 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:51.291 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 18 02 90 a3 62 01 23 41 60 5b 42 17 20 |
08:53:51.307 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.347 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:51.385 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:51.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:51.392 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:51.393 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 24 23 86 e5 62 8d 72 65 63 a5 63 00 f0 |
08:53:51.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.446 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.460 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:51.484 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:51.484 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:51.495 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:51.495 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 30 13 fb 02 00 03 00 17 32 1d 70 01 33 |
08:53:51.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.547 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:51.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:51.585 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:51.607 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.643 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:51.643 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 3c 93 42 fb d1 20 64 17 20 00 f0 08 fb |
08:53:51.687 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.701 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:51.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:51.724 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:51.726 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:51.726 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 48 02 00 03 00 00 21 17 32 19 70 01 33 |
08:53:51.746 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.746 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.786 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.800 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:51.824 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:51.828 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:51.846 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:51.846 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 54 93 42 fb d1 60 64 17 20 00 f0 fc fa |
08:53:51.853 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.891 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.905 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:51.928 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:51.928 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:51.930 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:51.930 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 60 02 00 03 00 00 21 17 32 19 70 01 33 |
08:53:51.950 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.950 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:51.990 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:51.990 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:52.027 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:52.027 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:52.036 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:52.036 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 6c 9a 42 fb d1 54 4b a0 64 70 20 a3 62 |
08:53:52.054 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.089 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.089 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:52.126 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:52.126 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:52.149 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.149 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.149 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:52.149 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 78 00 f0 dc fa 28 34 04 60 05 00 17 20 |
08:53:52.194 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.195 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.209 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:52.232 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:52.232 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:52.247 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:52.247 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 84 00 f0 e8 fa 01 00 03 00 00 22 17 31 |
08:53:52.257 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.294 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:52.331 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:52.331 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:52.353 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.353 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.369 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:52.369 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 90 1a 70 01 33 99 42 fb d1 4b 4b 68 60 |
08:53:52.414 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.414 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:52.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:52.452 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:52.475 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.476 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:52.476 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 9c ab 61 4b 4b 28 68 eb 61 4a 4b aa 84 |
08:53:52.522 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:52.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:52.559 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:52.571 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:52.572 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef a8 2b 62 03 68 5b 6b 98 47 04 00 00 f0 |
08:53:52.582 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.626 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.635 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:52.658 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:52.659 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:52.666 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:52.666 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef b4 d1 fa 00 22 03 00 01 3c 00 2c 50 da |
08:53:52.687 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.725 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.725 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:52.762 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:52.762 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:52.769 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:52.769 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef c0 03 22 28 65 ab 1d db 7f 42 49 02 33 |
08:53:52.784 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.784 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.824 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.824 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:52.862 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:52.862 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:52.864 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:52.864 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef cc 13 40 ea 1d d3 77 2b 00 00 22 2c 33 |
08:53:52.884 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.884 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.924 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.924 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:52.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:52.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:52.962 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:52.963 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:52.964 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef d8 1a 70 37 4b 8c 46 59 65 01 21 18 00 |
08:53:52.984 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:52.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.023 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.037 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:53.061 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:53.064 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:53.066 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:53.066 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef e4 99 65 02 99 28 30 19 66 19 00 03 90 |
08:53:53.086 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.126 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.126 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:53.163 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:53.164 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:53.166 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:53.167 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef f0 60 46 1f 4c 74 31 0a 70 1d 65 37 49 |
08:53:53.186 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.187 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.226 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:53.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:53.265 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:53.269 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:53.269 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef fc e5 62 2d 6a |
08:53:53.287 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.316 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.316 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:53.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:53.354 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:53.362 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:53.363 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6800 with 256 bytes and CRC32 0xB06A6122 |
08:53:53.364 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ee 00 01 00 68 00 00 22 61 6a b0 |
08:53:53.376 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.412 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.412 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.426 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:53.450 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:53.450 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:53.453 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 83,4% |
08:53:53.453 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 00 08 60 8d 60 19 1d ca 67 19 00 84 31 |
08:53:53.473 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.513 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:53.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:53.551 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:53.552 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:53.552 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 0c 9a 66 da 67 0a 70 1a 00 23 21 88 32 |
08:53:53.572 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:53.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:53.650 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:53.651 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:53.652 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 18 11 60 1a 00 21 6a 8c 32 11 60 01 9a |
08:53:53.671 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:53.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:53.749 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:53.751 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:53.751 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 24 de 65 5a 66 2c 4a 9f 67 9a 62 1a 00 |
08:53:53.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.32->6/1/11 L_Data.ind, low priority hop count 6, tpdu 00 80 07 4b |
08:53:53.794 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.794 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.834 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.834 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:53.871 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:53.875 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:53.905 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:53.905 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:53.974 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:53.974 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 30 90 32 16 60 1a 00 94 32 17 60 1a 00 |
08:53:54.018 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.018 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:54.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:54.056 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:54.078 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.141 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:54.141 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 3c 01 99 98 32 11 60 02 9a 9c 33 1a 60 |
08:53:54.185 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.200 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:54.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:54.227 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:54.249 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.249 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.298 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:54.298 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 48 25 49 26 4a 03 98 00 f0 4f fa ff f7 |
08:53:54.342 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:54.380 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:54.380 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:54.383 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:54.383 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 54 cf fe a0 66 05 b0 f0 bd 00 f0 1c fa |
08:53:54.404 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.404 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.444 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:54.481 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:54.482 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:54.504 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.504 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.535 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:54.535 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 60 3c e7 1a 70 01 3c 01 33 a8 e7 c0 46 |
08:53:54.579 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:54.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:54.621 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:54.625 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:54.625 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 6c 08 02 00 10 b8 01 00 10 00 c0 00 40 |
08:53:54.643 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.644 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.683 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.684 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:54.721 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:54.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:54.728 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:54.728 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 78 00 00 01 40 00 40 01 40 00 80 01 40 |
08:53:54.746 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.784 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.784 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.802 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:54.821 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:54.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:54.838 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:54.838 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 84 24 02 00 10 90 72 00 00 00 10 3c 00 |
08:53:54.846 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.847 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.884 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.884 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.898 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:54.921 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:54.921 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:54.931 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:54.931 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 90 47 82 79 00 00 60 40 00 48 82 81 00 |
08:53:54.944 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.984 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:54.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:54.998 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:55.022 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:55.022 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:55.039 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:55.039 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 9c b0 72 00 00 8c 72 00 00 ff 01 00 00 |
08:53:55.047 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.047 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.085 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:55.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:55.123 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:55.146 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.151 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:55.152 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef a8 80 74 00 00 60 01 00 10 e1 10 00 00 |
08:53:55.196 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.210 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:55.233 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:55.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:55.236 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:55.236 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef b4 80 73 00 00 38 01 00 10 a0 73 00 00 |
08:53:55.257 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.296 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.311 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:55.334 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:55.334 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:55.341 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:55.342 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef c0 b8 73 00 00 ec 73 00 00 10 02 00 10 |
08:53:55.356 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.396 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.396 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:55.433 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:55.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:55.438 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:55.438 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef cc 28 c2 01 00 29 82 69 00 40 82 5c 00 |
08:53:55.455 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.455 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.495 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.509 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:55.532 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:55.532 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:55.535 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:55.535 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef d8 d4 00 00 10 2c 74 00 00 f5 37 00 00 |
08:53:55.558 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.558 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.595 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.610 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:55.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:55.633 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:55.654 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.655 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.695 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:55.695 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef e4 e4 00 00 10 8e 21 20 20 1a 4b 89 00 |
08:53:55.741 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.755 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:55.779 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:55.779 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:55.800 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:55.800 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef f0 5a 58 82 43 5a 50 00 22 71 39 1a 62 |
08:53:55.803 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.803 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.844 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.844 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.862 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:55.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:55.883 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:55.886 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:55.886 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef fc ff 39 c0 46 |
08:53:55.906 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.935 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:55.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:55.972 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:55.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:55.974 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:55.975 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6900 with 256 bytes and CRC32 0x5330D435 |
08:53:55.975 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ee 00 01 00 69 00 00 35 d4 30 53 |
08:53:55.994 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:55.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.030 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:56.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:56.068 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:56.069 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 84,8% |
08:53:56.071 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 00 01 39 00 29 fb d1 01 22 1a 64 5a 64 |
08:53:56.090 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.130 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:56.167 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:56.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:56.169 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:56.169 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 0c 59 64 5a 64 59 6c 11 42 fc d0 23 22 |
08:53:56.189 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.229 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.229 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:56.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:56.277 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:56.286 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:56.286 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 18 8e 21 80 20 9a 60 89 00 5a 58 82 43 |
08:53:56.299 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.339 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.339 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.353 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:56.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:56.376 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:56.378 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:56.378 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 24 5a 50 01 22 d9 68 11 42 fc d0 03 21 |
08:53:56.398 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.398 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.438 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.438 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:56.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:56.475 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:56.477 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:56.477 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 30 19 67 00 21 5a 67 59 67 5a 67 01 22 |
08:53:56.497 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.497 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.537 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:56.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:56.575 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:56.580 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:56.580 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 3c 59 6f 11 42 fc d0 9a 67 05 49 06 4b |
08:53:56.597 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.597 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.638 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:56.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:56.675 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:56.683 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:56.684 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 48 d9 67 06 4b 1a 60 06 4b 1a 60 06 4b |
08:53:56.697 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.736 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:56.774 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:56.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:56.777 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:56.777 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 54 1a 60 70 47 00 80 04 40 5f 00 01 00 |
08:53:56.797 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.837 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.851 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:56.875 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:56.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:56.883 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:56.883 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 60 04 80 04 40 94 80 04 40 98 80 04 40 |
08:53:56.899 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.899 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.938 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:56.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:56.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:56.976 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:56.976 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:56.990 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:56.990 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 6c 9c 80 04 40 00 22 43 08 8b 42 74 d3 |
08:53:57.000 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.039 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:57.077 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:57.077 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:57.092 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:57.092 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 78 03 09 8b 42 5f d3 03 0a 8b 42 44 d3 |
08:53:57.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.140 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:57.178 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:57.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:57.192 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:57.192 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 84 03 0b 8b 42 28 d3 03 0c 8b 42 0d d3 |
08:53:57.204 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.204 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.240 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.254 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:57.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:57.277 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:57.296 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:57.297 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 90 ff 22 09 02 12 ba 03 0c 8b 42 02 d3 |
08:53:57.302 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.302 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.341 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.355 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:57.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:57.381 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:57.402 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:57.402 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 9c 12 12 09 02 65 d0 03 0b 8b 42 19 d3 |
08:53:57.404 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.446 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.460 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:57.483 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:57.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:57.498 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:57.498 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef a8 00 e0 09 0a c3 0b 8b 42 01 d3 cb 03 |
08:53:57.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.548 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:57.584 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:57.587 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:57.602 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:57.602 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef b4 c0 1a 52 41 83 0b 8b 42 01 d3 8b 03 |
08:53:57.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.649 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.649 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:57.687 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:57.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:57.702 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:57.703 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef c0 c0 1a 52 41 43 0b 8b 42 01 d3 4b 03 |
08:53:57.712 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.750 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.750 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:57.788 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:57.788 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:57.808 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:57.808 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef cc c0 1a 52 41 03 0b 8b 42 01 d3 0b 03 |
08:53:57.814 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.853 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:57.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:57.891 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:57.898 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:57.898 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef d8 c0 1a 52 41 c3 0a 8b 42 01 d3 cb 02 |
08:53:57.914 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.954 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:57.954 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:57.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:57.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:57.992 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:58.012 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:58.012 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef e4 c0 1a 52 41 83 0a 8b 42 01 d3 8b 02 |
08:53:58.016 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.016 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.058 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.073 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:58.096 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:58.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:58.100 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:58.100 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef f0 c0 1a 52 41 43 0a 8b 42 01 d3 4b 02 |
08:53:58.120 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.120 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.159 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:58.196 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:58.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:58.203 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:58.203 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef fc c0 1a 52 41 |
08:53:58.221 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.249 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.249 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:58.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:58.286 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:58.289 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:58.291 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6A00 with 256 bytes and CRC32 0x31808EA8 |
08:53:58.291 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ee 00 01 00 6a 00 00 a8 8e 80 31 |
08:53:58.309 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.345 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:53:58.383 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:53:58.383 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:53:58.385 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 86,2% |
08:53:58.385 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 00 03 0a 8b 42 01 d3 0b 02 c0 1a 52 41 |
08:53:58.405 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.445 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.459 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:53:58.482 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:53:58.483 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:53:58.500 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:58.500 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 0c cd d2 c3 09 8b 42 01 d3 cb 01 c0 1a |
08:53:58.505 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.547 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:53:58.584 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:53:58.589 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:53:58.590 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:58.590 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 18 52 41 83 09 8b 42 01 d3 8b 01 c0 1a |
08:53:58.610 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.650 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.664 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:53:58.688 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:53:58.689 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:53:58.697 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:58.699 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 24 52 41 43 09 8b 42 01 d3 4b 01 c0 1a |
08:53:58.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.751 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.766 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:53:58.788 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:53:58.790 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:53:58.791 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:58.792 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 30 52 41 03 09 8b 42 01 d3 0b 01 c0 1a |
08:53:58.811 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.852 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:53:58.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:53:58.889 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:53:58.892 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:58.892 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 3c 52 41 c3 08 8b 42 01 d3 cb 00 c0 1a |
08:53:58.915 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.952 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:58.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:58.967 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:53:58.990 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:53:58.990 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:53:58.991 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:58.991 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 48 52 41 83 08 8b 42 01 d3 8b 00 c0 1a |
08:53:59.011 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.012 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.051 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.051 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.066 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:53:59.089 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:53:59.089 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:53:59.107 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:59.107 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 54 52 41 43 08 8b 42 01 d3 4b 00 c0 1a |
08:53:59.115 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.155 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:53:59.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:53:59.189 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:53:59.194 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:59.194 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 60 52 41 41 1a 00 d2 01 46 52 41 10 46 |
08:53:59.215 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.254 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.254 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.268 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:53:59.291 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:53:59.292 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:53:59.293 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:59.293 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 6c 70 47 ff e7 01 b5 00 20 00 f0 f0 f8 |
08:53:59.313 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.353 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.353 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.367 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:53:59.390 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:53:59.390 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:53:59.403 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:59.403 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 78 02 bd c0 46 00 29 f7 d0 76 e7 70 47 |
08:53:59.415 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.415 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.454 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.454 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:53:59.491 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:53:59.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:53:59.514 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:59.514 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.514 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 84 03 46 0b 43 7f d4 00 22 43 08 8b 42 |
08:53:59.559 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.574 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:53:59.597 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:53:59.597 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:53:59.621 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.667 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:59.667 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 90 74 d3 03 09 8b 42 5f d3 03 0a 8b 42 |
08:53:59.712 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:53:59.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:53:59.751 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:53:59.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.791 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:59.791 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 9c 44 d3 03 0b 8b 42 28 d3 03 0c 8b 42 |
08:53:59.836 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:53:59.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:53:59.875 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:53:59.887 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:53:59.887 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef a8 0d d3 ff 22 09 02 12 ba 03 0c 8b 42 |
08:53:59.898 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.898 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.936 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.936 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:53:59.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:53:59.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:53:59.974 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:53:59.997 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:53:59.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.001 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:00.001 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef b4 02 d3 12 12 09 02 65 d0 03 0b 8b 42 |
08:54:00.048 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.048 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:00.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:00.085 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:00.087 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:00.087 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef c0 19 d3 00 e0 09 0a c3 0b 8b 42 01 d3 |
08:54:00.108 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.108 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.148 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.148 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:00.186 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:00.186 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:00.198 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:00.199 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef cc cb 03 c0 1a 52 41 83 0b 8b 42 01 d3 |
08:54:00.210 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.210 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.249 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.249 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:00.287 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:00.287 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:00.309 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.323 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:00.323 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef d8 8b 03 c0 1a 52 41 43 0b 8b 42 01 d3 |
08:54:00.367 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.367 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:00.404 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:00.405 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:00.406 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:00.406 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef e4 4b 03 c0 1a 52 41 03 0b 8b 42 01 d3 |
08:54:00.426 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.426 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.466 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.480 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:00.504 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:00.504 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:00.510 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:00.510 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef f0 0b 03 c0 1a 52 41 c3 0a 8b 42 01 d3 |
08:54:00.526 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.526 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.566 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.566 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.580 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:00.604 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:00.604 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:00.613 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:00.614 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef fc cb 02 c0 1a |
08:54:00.626 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.654 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.654 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:00.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:00.692 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:00.710 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:00.719 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.34->6/1/12 L_Data.ind, low priority hop count 6, tpdu 00 80 07 1c |
08:54:00.738 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.738 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.747 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6B00 with 256 bytes and CRC32 0x9666358F |
08:54:00.778 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ee 00 01 00 6b 00 00 8f 35 66 96 |
08:54:00.819 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:00.856 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:00.856 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:00.879 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.859 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 87,7% |
08:54:00.881 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 00 52 41 83 0a 8b 42 01 d3 8b 02 c0 1a |
08:54:00.926 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.926 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.940 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:00.963 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:00.963 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:00.985 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:00.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:00.997 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:00.997 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 0c 52 41 43 0a 8b 42 01 d3 4b 02 c0 1a |
08:54:01.041 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.055 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:01.078 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:01.078 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:01.081 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:01.097 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 18 52 41 03 0a 8b 42 01 d3 0b 02 c0 1a |
08:54:01.104 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.143 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.148 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.157 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:01.180 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:01.181 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:01.182 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:01.182 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 24 52 41 cd d2 c3 09 8b 42 01 d3 cb 01 |
08:54:01.203 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.203 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.242 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:01.280 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:01.280 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:01.282 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:01.282 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 30 c0 1a 52 41 83 09 8b 42 01 d3 8b 01 |
08:54:01.302 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.302 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.342 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.342 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.357 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:01.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:01.380 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:01.382 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:01.382 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 3c c0 1a 52 41 43 09 8b 42 01 d3 4b 01 |
08:54:01.403 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.403 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.443 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:01.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:01.483 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:01.485 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:01.485 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 48 c0 1a 52 41 03 09 8b 42 01 d3 0b 01 |
08:54:01.505 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.545 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:01.582 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:01.582 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:01.584 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:01.584 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 54 c0 1a 52 41 c3 08 8b 42 01 d3 cb 00 |
08:54:01.608 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.645 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.659 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:01.683 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:01.683 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:01.685 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:01.685 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 60 c0 1a 52 41 83 08 8b 42 01 d3 8b 00 |
08:54:01.705 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.705 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.745 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.745 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.759 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:01.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:01.783 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:01.784 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:01.785 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 6c c0 1a 52 41 43 08 8b 42 01 d3 4b 00 |
08:54:01.804 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.845 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.858 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:01.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:01.882 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:01.888 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:01.888 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 78 c0 1a 52 41 41 1a 00 d2 01 46 52 41 |
08:54:01.913 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.913 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.948 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:01.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:01.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:01.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:01.997 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:01.999 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:01.999 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 84 10 46 70 47 5d e0 ca 0f 00 d0 49 42 |
08:54:02.019 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.060 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.060 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.073 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:02.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:02.096 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:02.099 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:02.099 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 90 03 10 00 d3 40 42 53 40 00 22 9c 46 |
08:54:02.119 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.119 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.158 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:02.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:02.196 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:02.220 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.232 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:02.232 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 9c 03 09 8b 42 2d d3 03 0a 8b 42 12 d3 |
08:54:02.277 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:02.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:02.315 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:02.318 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:02.318 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef a8 fc 22 89 01 12 ba 03 0a 8b 42 0c d3 |
08:54:02.338 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.338 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.378 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.378 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.392 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:02.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:02.416 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:02.438 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.438 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.454 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:02.454 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef b4 89 01 92 11 8b 42 08 d3 89 01 92 11 |
08:54:02.498 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.512 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:02.535 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:02.535 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:02.551 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:02.551 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef c0 8b 42 04 d3 89 01 3a d0 92 11 00 e0 |
08:54:02.559 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.597 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.597 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:02.634 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:02.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:02.647 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:02.647 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef cc 89 09 c3 09 8b 42 01 d3 cb 01 c0 1a |
08:54:02.658 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.659 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.696 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:02.733 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:02.733 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:02.742 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:02.742 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef d8 52 41 83 09 8b 42 01 d3 8b 01 c0 1a |
08:54:02.758 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.797 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.798 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:02.835 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:02.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:02.858 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.858 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.859 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:02.859 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef e4 52 41 43 09 8b 42 01 d3 4b 01 c0 1a |
08:54:02.904 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:02.918 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:02.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:02.942 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:02.953 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:02.953 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef f0 52 41 03 09 8b 42 01 d3 0b 01 c0 1a |
08:54:02.970 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:02.970 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.005 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.005 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:03.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:03.042 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:03.059 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:03.059 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef fc 52 41 c3 08 |
08:54:03.067 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.067 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.093 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.093 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.108 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:03.132 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:03.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:03.143 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:03.154 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.190 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6C00 with 256 bytes and CRC32 0x05627C90 |
08:54:03.191 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ee 00 01 00 6c 00 00 90 7c 62 05 |
08:54:03.232 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:03.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:03.269 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:03.294 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.272 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 89,1% |
08:54:03.299 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 00 8b 42 01 d3 cb 00 c0 1a 52 41 83 08 |
08:54:03.343 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.357 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:03.381 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:03.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:03.390 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:03.390 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 0c 8b 42 01 d3 8b 00 c0 1a 52 41 d9 d2 |
08:54:03.402 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.443 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.457 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:03.480 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:03.480 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:03.503 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.504 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:03.504 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 18 43 08 8b 42 01 d3 4b 00 c0 1a 52 41 |
08:54:03.551 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:03.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:03.590 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:03.596 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:03.597 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 24 41 1a 00 d2 01 46 63 46 52 41 5b 10 |
08:54:03.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.652 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:03.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:03.691 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:03.714 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.764 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:03.764 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 30 10 46 01 d3 40 42 00 2b 00 d5 49 42 |
08:54:03.809 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.809 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:03.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:03.846 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:03.866 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:03.866 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 3c 70 47 63 46 5b 10 00 d3 40 42 01 b5 |
08:54:03.873 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.874 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.912 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:03.926 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:03.949 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:03.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:03.956 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:03.956 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 48 00 20 00 f0 05 f8 02 bd 00 29 f8 d0 |
08:54:03.971 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:03.971 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.011 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.025 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:04.048 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:04.052 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:04.062 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:04.062 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 54 16 e7 70 47 70 47 c0 46 02 b4 71 46 |
08:54:04.073 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.073 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.113 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:04.151 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:04.151 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:04.154 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:04.154 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 60 49 08 49 00 09 56 49 00 8e 44 02 bc |
08:54:04.174 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.215 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.228 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:04.252 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:04.252 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:04.253 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:04.254 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 6c 70 47 c0 46 02 b4 71 46 49 08 49 00 |
08:54:04.273 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.313 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.327 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:04.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:04.351 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:04.353 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:04.353 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 78 09 5c 49 00 8e 44 02 bc 70 47 c0 46 |
08:54:04.372 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.413 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:04.450 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:04.450 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:04.453 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:04.453 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 84 03 b4 71 46 49 08 40 00 49 00 09 5a |
08:54:04.474 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.513 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:04.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:04.551 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:04.565 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:04.566 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 90 49 00 8e 44 03 bc 70 47 03 00 82 18 |
08:54:04.575 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:04.650 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:04.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:04.651 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:04.651 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 9c 93 42 00 d1 70 47 19 70 01 33 f9 e7 |
08:54:04.671 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:04.749 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:04.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:04.756 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:04.757 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef a8 70 b5 00 26 0c 4c 0d 4d 64 1b a4 10 |
08:54:04.770 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.811 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:04.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:04.849 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:04.861 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:04.861 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef b4 a6 42 09 d1 00 26 00 f0 9f fb 0a 4c |
08:54:04.876 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.912 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:04.926 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:04.949 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:04.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:04.951 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:04.951 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef c0 0a 4d 64 1b a4 10 a6 42 05 d1 70 bd |
08:54:04.972 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:04.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.012 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.012 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.027 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:05.050 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:05.050 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:05.072 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.072 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.101 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:05.101 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef cc b3 00 eb 58 98 47 01 36 ee e7 b3 00 |
08:54:05.145 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:05.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:05.183 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:05.208 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:05.208 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef d8 eb 58 98 47 01 36 f2 e7 08 75 00 00 |
08:54:05.210 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.210 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.254 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.254 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:05.292 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:05.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:05.304 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:05.304 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef e4 08 75 00 00 10 75 00 00 08 75 00 00 |
08:54:05.315 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.353 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.353 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:05.391 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:05.392 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:05.414 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.414 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.430 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:05.430 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef f0 03 00 10 b5 08 00 19 00 00 f0 0a f8 |
08:54:05.474 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:05.512 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:05.512 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:05.533 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.569 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:05.569 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef fc 10 bd 00 23 |
08:54:05.601 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.601 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.619 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:05.640 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:05.642 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:05.645 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:05.645 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6D00 with 256 bytes and CRC32 0x7C80013E |
08:54:05.646 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ee 00 01 00 6d 00 00 3e 01 80 7c |
08:54:05.665 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.665 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.700 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.700 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:05.738 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:05.738 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:05.741 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 90,5% |
08:54:05.743 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 10 b5 9a 42 00 d1 10 bd cc 5c c4 54 |
08:54:05.761 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.801 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.816 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:05.839 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:05.839 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:05.860 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.861 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.881 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:05.881 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c 01 33 f8 e7 10 b5 04 00 04 48 13 00 |
08:54:05.925 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.925 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:05.939 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:05.963 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:05.963 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:05.971 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:05.972 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 18 00 28 04 d0 0a 00 02 20 21 00 00 e0 |
08:54:05.985 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:05.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.025 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.025 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:06.063 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:06.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:06.069 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:06.069 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 24 00 bf 10 bd 00 00 00 00 10 b5 00 f0 |
08:54:06.085 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.124 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.143 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:06.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:06.162 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:06.186 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.186 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.194 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:06.195 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 30 17 f8 10 bd 10 b5 04 1e 00 d1 01 34 |
08:54:06.240 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.254 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:06.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:06.277 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:06.299 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.364 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:06.364 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 3c 20 00 00 f0 41 f8 00 28 00 d0 10 bd |
08:54:06.409 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.409 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.423 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:06.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:06.447 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:06.469 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.469 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.479 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:06.479 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 48 00 f0 0e f8 00 28 01 d1 00 f0 10 f8 |
08:54:06.527 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.541 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:06.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:06.565 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:06.588 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.588 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.609 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:06.609 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 54 80 47 f1 e7 10 b5 ff f7 eb ff 10 bd |
08:54:06.654 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.654 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:06.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:06.691 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:06.694 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:06.694 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 60 10 b5 00 f0 39 f8 10 bd 01 4b 18 68 |
08:54:06.715 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.754 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:06.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:06.792 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:06.795 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:06.795 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 6c 70 47 c0 46 40 03 00 10 fe e7 ff ff |
08:54:06.816 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.816 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.854 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:06.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:06.892 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:06.905 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:06.905 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 78 06 48 07 49 09 1a 8b 10 c9 0f c9 18 |
08:54:06.916 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.916 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.953 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:06.954 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:06.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:06.991 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:06.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:06.993 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:06.993 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 84 10 b5 49 10 03 d0 04 4b 00 2b 00 d0 |
08:54:07.014 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.054 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:07.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:07.091 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:07.093 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:07.093 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 90 98 47 10 bd 38 01 00 10 38 01 00 10 |
08:54:07.113 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.152 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.153 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:07.190 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:07.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:07.192 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:07.192 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 9c 00 00 00 00 05 4b 10 b5 00 2b 03 d0 |
08:54:07.212 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.252 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.252 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:07.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:07.289 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:07.291 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:07.291 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef a8 04 49 05 48 00 e0 00 bf ff f7 e2 ff |
08:54:07.311 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.311 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.351 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.365 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:07.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:07.389 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:07.390 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:07.390 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef b4 10 bd c0 46 00 00 00 00 44 03 00 10 |
08:54:07.410 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.450 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.450 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.464 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:07.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:07.488 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:07.490 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:07.490 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef c0 1c 75 00 00 10 b5 03 4b 01 00 18 68 |
08:54:07.509 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.550 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.564 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:07.587 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:07.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:07.589 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:07.589 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef cc 00 f0 30 f8 10 bd c0 46 e8 00 00 10 |
08:54:07.609 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.609 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.649 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.649 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:07.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:07.688 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:07.701 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:07.702 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef d8 10 b5 03 4b 01 00 18 68 00 f0 c4 f8 |
08:54:07.712 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.749 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.750 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:07.787 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:07.787 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:07.807 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:07.808 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef e4 10 bd c0 46 e8 00 00 10 70 b5 0f 4e |
08:54:07.810 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.810 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.852 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:07.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:07.890 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:07.913 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.913 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.932 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:07.932 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef f0 0d 00 31 68 04 00 00 29 02 d1 00 f0 |
08:54:07.977 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:07.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:07.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:08.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:08.018 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:08.020 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:08.020 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef fc a3 f8 30 60 |
08:54:08.040 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.070 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:08.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:08.107 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:08.130 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.131 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:08.166 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6E00 with 256 bytes and CRC32 0xC496ECB7 |
08:54:08.168 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ee 00 01 00 6e 00 00 b7 ec 96 c4 |
08:54:08.207 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.222 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:08.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:08.246 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:08.250 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 92,0% |
08:54:08.264 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 00 29 00 20 00 00 f0 9e f8 43 1c 03 d1 |
08:54:08.272 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.309 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.309 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:08.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:08.346 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:08.369 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.372 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:08.372 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 0c 01 25 6d 42 28 00 70 bd 03 23 c5 1c |
08:54:08.416 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.431 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:08.454 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:08.457 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:08.460 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:08.460 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 18 9d 43 a8 42 f8 d0 29 1a 20 00 00 f0 |
08:54:08.478 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.478 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.518 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:08.556 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:08.556 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:08.577 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.580 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:08.580 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 24 8f f8 01 30 f2 d1 ef e7 5c 03 00 10 |
08:54:08.627 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:08.662 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:08.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:08.674 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:08.674 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 30 03 23 f7 b5 cd 1c 9d 43 08 35 06 00 |
08:54:08.685 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.723 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.738 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:08.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:08.761 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:08.787 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/5/1 L_Data.ind, low priority hop count 6, tpdu 00 80 0c 15 |
08:54:08.801 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:08.801 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 3c 0c 2d 34 d2 0c 25 a9 42 33 d8 30 00 |
08:54:08.814 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.846 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:08.883 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:08.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:08.900 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:08.900 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 48 00 f0 6c f8 34 4f 3b 68 1c 00 00 2c |
08:54:08.909 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.910 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.946 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:08.946 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:08.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:08.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:08.984 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:08.994 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:08.994 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 54 2f d1 29 00 30 00 ff f7 c7 ff 04 00 |
08:54:09.010 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/2/0 L_Data.ind, low priority hop count 6, tpdu 00 80 0c 6a |
08:54:09.029 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.029 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.069 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:09.106 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:09.106 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:09.128 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.160 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:09.160 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 60 43 1c 58 d1 3c 68 21 00 00 29 49 d1 |
08:54:09.204 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.204 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.222 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:09.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:09.242 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:09.265 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.266 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:09.266 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 6c 00 2c 4c d0 23 68 30 00 e3 18 01 93 |
08:54:09.311 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.312 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.327 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:09.349 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:09.349 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:09.367 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:09.367 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 78 00 f0 64 f8 01 9b 83 42 43 d1 23 68 |
08:54:09.372 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.411 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:09.449 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:09.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:09.471 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.472 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.484 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:09.484 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 84 30 00 ed 1a 29 00 ff f7 af ff 01 30 |
08:54:09.529 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.543 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:09.567 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:09.567 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:09.580 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:09.580 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 90 3b d0 23 68 5b 19 23 60 3b 68 00 2b |
08:54:09.594 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.630 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.644 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:09.667 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:09.667 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:09.669 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:09.669 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 9c 3d d0 5a 68 a2 42 30 d1 00 22 5a 60 |
08:54:09.689 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.730 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.730 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.744 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:09.767 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:09.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:09.769 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:09.769 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef a8 12 e0 00 2d c9 da 0c 23 33 60 00 20 |
08:54:09.791 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.829 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:09.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:09.867 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:09.875 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:09.875 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef b4 fe bd 21 68 49 1b 1e d4 0b 29 17 d9 |
08:54:09.888 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.928 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.928 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:09.942 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:09.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:09.965 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:09.970 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:09.970 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef c0 62 19 25 60 a3 42 11 d1 3a 60 63 68 |
08:54:09.988 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:09.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.028 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.028 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:10.065 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:10.065 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:10.067 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:10.068 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef cc 11 60 53 60 30 00 00 f0 2f f8 20 00 |
08:54:10.092 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.132 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:10.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:10.171 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:10.174 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:10.174 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef d8 07 22 0b 30 23 1d 90 43 c2 1a 98 42 |
08:54:10.197 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.234 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.234 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:10.272 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:10.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:10.274 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:10.274 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef e4 e6 d0 1b 1a a3 50 e3 e7 5a 60 ec e7 |
08:54:10.293 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.293 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.333 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.348 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:10.371 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:10.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:10.373 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:10.373 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef f0 62 68 a3 42 d7 d1 3a 60 ea e7 23 00 |
08:54:10.394 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.433 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.434 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.448 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:10.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:10.471 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:10.482 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:10.482 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef fc 64 68 a8 e7 |
08:54:10.495 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.495 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.523 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:10.561 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:10.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:10.574 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:10.576 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6F00 with 256 bytes and CRC32 0x715F7A93 |
08:54:10.577 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ee 00 01 00 6f 00 00 93 7a 5f 71 |
08:54:10.587 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.622 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.622 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.636 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:10.660 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:10.660 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:10.662 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 93,4% |
08:54:10.663 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 00 0c 00 49 68 b0 e7 13 00 c7 e7 0c 23 |
08:54:10.683 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.683 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.723 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.723 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.737 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:10.760 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:10.760 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:10.782 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.790 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:10.790 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 0c 30 00 33 60 00 f0 10 f8 cd e7 05 60 |
08:54:10.839 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.839 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:10.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:10.881 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:10.903 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.925 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:10.926 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 18 da e7 5b 60 ff de c0 46 60 03 00 10 |
08:54:10.971 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:10.971 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:10.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:11.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:11.011 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:11.013 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:11.014 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 24 10 b5 02 48 00 f0 1e f8 10 bd c0 46 |
08:54:11.034 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.074 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.074 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.088 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:11.111 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:11.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:11.115 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:11.115 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 30 64 03 00 10 10 b5 02 48 00 f0 17 f8 |
08:54:11.134 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.173 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.188 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:11.211 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:11.211 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:11.230 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:11.230 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 3c 10 bd c0 46 64 03 00 10 00 23 70 b5 |
08:54:11.243 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.244 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.275 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.275 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:11.313 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:11.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:11.335 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.339 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:11.339 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 48 06 4d 04 00 08 00 2b 60 00 f0 56 f8 |
08:54:11.384 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:11.422 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:11.422 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:11.445 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.459 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:11.459 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 54 43 1c 03 d1 2b 68 00 2b 00 d0 23 60 |
08:54:11.503 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.517 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:11.542 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:11.542 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:11.565 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.595 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:11.595 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 60 70 bd c0 46 68 03 00 10 70 47 70 47 |
08:54:11.639 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.653 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:11.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:11.677 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:11.699 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.699 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.710 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:11.710 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 6c 70 b5 05 00 0c 1e 10 d0 04 3c 23 68 |
08:54:11.754 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.768 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:11.791 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:11.792 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:11.804 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:11.804 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 78 00 2b 00 da e4 18 28 00 ff f7 d0 ff |
08:54:11.814 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.853 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:11.891 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:11.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:11.896 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:11.896 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 84 1d 4a 13 68 00 2b 05 d1 63 60 14 60 |
08:54:11.914 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.954 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:11.954 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:11.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:11.992 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:11.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:12.009 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:12.009 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 90 28 00 ff f7 cf ff 70 bd a3 42 08 d9 |
08:54:12.018 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.018 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.058 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:12.092 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:12.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:12.108 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:12.108 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 9c 20 68 21 18 8b 42 f3 d1 19 68 5b 68 |
08:54:12.116 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.116 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.154 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:12.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:12.192 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:12.219 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.247 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:12.247 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef a8 09 18 21 60 ee e7 1a 00 5b 68 00 2b |
08:54:12.291 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.291 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:12.329 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:12.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:12.352 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.352 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.362 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:12.362 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef b4 01 d0 a3 42 f9 d9 11 68 50 18 a0 42 |
08:54:12.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:12.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:12.446 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:12.449 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:12.449 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef c0 0b d1 20 68 09 18 50 18 11 60 83 42 |
08:54:12.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:12.546 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:12.546 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:12.552 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:12.552 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef cc e0 d1 18 68 5b 68 41 18 11 60 53 60 |
08:54:12.570 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.610 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:12.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:12.648 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:12.650 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:12.650 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef d8 da e7 a0 42 02 d9 0c 23 2b 60 d5 e7 |
08:54:12.670 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.710 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.710 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:12.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:12.748 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:12.749 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:12.749 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef e4 20 68 21 18 8b 42 03 d1 19 68 5b 68 |
08:54:12.777 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.809 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.809 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:12.847 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:12.847 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:12.849 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:12.849 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef f0 09 18 21 60 63 60 54 60 ca e7 c0 46 |
08:54:12.869 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.908 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.909 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:12.946 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:12.946 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:12.948 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:12.948 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef fc 60 03 00 10 |
08:54:12.968 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:12.996 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:12.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.012 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:13.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:13.041 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:13.048 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:13.049 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x7000 with 256 bytes and CRC32 0xE74D853C |
08:54:13.049 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ee 00 01 00 70 00 00 3c 85 4d e7 |
08:54:13.064 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.100 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.114 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:13.137 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:13.142 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:13.143 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 94,9% |
08:54:13.145 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 00 70 b5 0d 4d 04 00 2b 68 00 2b 01 d1 |
08:54:13.165 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.204 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.204 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:13.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:13.250 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:13.252 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:13.252 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 0c 0b 4b 2b 60 03 23 2e 68 03 34 9c 43 |
08:54:13.272 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.312 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.312 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.326 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:13.349 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:13.349 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:13.351 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:13.351 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 18 34 19 20 00 00 f0 10 f8 00 28 02 d1 |
08:54:13.371 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.411 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:13.448 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:13.449 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:13.456 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:13.456 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 24 2c 60 30 00 70 bd 00 f0 15 f8 01 26 |
08:54:13.470 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.510 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:13.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:13.548 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:13.569 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:13.569 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 30 0c 23 76 42 03 60 f6 e7 6c 03 00 10 |
08:54:13.574 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.619 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.619 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:13.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:13.651 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:13.663 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:13.663 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 3c 70 03 00 10 03 00 04 48 00 28 03 d0 |
08:54:13.674 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.713 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.730 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:13.751 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:13.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:13.755 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:13.755 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 48 00 22 83 42 52 41 10 00 70 47 c0 46 |
08:54:13.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.812 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:13.850 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:13.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:13.862 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:13.862 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 54 00 00 00 00 01 4b 18 68 70 47 c0 46 |
08:54:13.873 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.912 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.927 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:13.950 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:13.950 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:13.975 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:13.975 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:13.976 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:13.976 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 60 e8 00 00 10 42 43 55 31 00 01 01 02 |
08:54:14.023 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.037 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:14.061 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:14.063 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:14.069 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:14.069 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 6c 03 04 06 08 0a 0e 0e 00 30 33 30 32 |
08:54:14.085 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.131 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:14.163 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:14.163 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:14.186 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.186 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.210 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:14.210 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 78 31 30 00 30 33 30 32 38 30 00 30 33 |
08:54:14.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->1/2/60 L_Data.ind, normal priority hop count 5, tpdu 00 80 00 |
08:54:14.275 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.275 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:14.307 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:14.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:14.315 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:14.315 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 84 30 32 30 30 00 ff ff ff 0e 00 7f 0e |
08:54:14.331 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.331 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.371 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.385 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:14.408 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:14.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:14.431 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.431 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.432 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:14.432 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 90 00 7f 0e 00 7f 0e 00 7f 0e 00 7f 0e |
08:54:14.478 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.478 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:14.515 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:14.515 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:14.537 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:14.537 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 9c 00 7f 00 00 01 01 00 06 02 00 02 02 |
08:54:14.538 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.582 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.582 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.596 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:14.619 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:14.620 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:14.627 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:14.628 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef a8 03 03 03 00 05 03 02 04 0e 00 7f 0e |
08:54:14.643 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.643 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.684 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.684 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:14.721 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:14.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:14.741 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:14.741 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef b4 00 7f 0e 00 7f 02 02 03 04 00 03 04 |
08:54:14.748 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->2/2/70 L_Data.ind, normal priority hop count 5, tpdu 00 80 ff |
08:54:14.764 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.804 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:14.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:14.842 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:14.853 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:14.853 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef c0 01 03 04 02 03 04 03 03 05 00 03 05 |
08:54:14.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->2/2/60 L_Data.ind, normal priority hop count 5, tpdu 00 80 ff |
08:54:14.885 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.925 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.925 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.939 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:14.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:14.963 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:14.985 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:14.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:14.997 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:14.997 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef cc 01 03 00 00 00 00 00 50 00 00 01 50 |
08:54:15.041 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.055 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:15.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:15.079 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:15.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.125 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:15.125 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef d8 00 00 02 50 00 00 03 50 26 c2 33 00 |
08:54:15.170 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:15.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:15.209 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:15.231 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.262 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:15.262 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef e4 47 82 79 00 61 c2 34 0f 64 c2 79 00 |
08:54:15.308 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:15.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:15.346 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:15.368 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.368 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.383 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:15.383 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef f0 03 00 04 00 07 00 0b 00 0c 00 0d 00 |
08:54:15.427 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:15.465 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:15.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:15.466 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:15.467 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef fc 13 00 14 00 |
08:54:15.487 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.515 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.515 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:15.553 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:15.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:15.566 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:15.576 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.569 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x7100 with 256 bytes and CRC32 0x43B97E2B |
08:54:15.585 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ee 00 01 00 71 00 00 2b 7e b9 43 |
08:54:15.625 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.640 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:15.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:15.663 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:15.666 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 96,3% |
08:54:15.668 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 00 18 00 19 00 1a 00 1d 00 1e 00 1f 00 |
08:54:15.689 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.726 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:15.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:15.764 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:15.769 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:15.769 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 0c 20 00 24 00 25 00 28 00 29 00 2a 00 |
08:54:15.786 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.833 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.840 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:15.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:15.872 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:15.874 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:15.874 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 18 05 00 0e 00 1b 00 26 00 02 00 0a 00 |
08:54:15.894 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:15.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:15.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:15.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:15.978 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:15.979 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:15.979 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 24 17 00 23 00 10 00 11 00 00 00 08 00 |
08:54:16.000 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.040 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:16.077 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:16.077 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:16.081 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:16.081 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 30 09 00 15 00 16 00 1c 00 21 00 22 00 |
08:54:16.099 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.139 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.153 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:16.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:16.178 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:16.179 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:16.179 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 3c 27 00 2b 00 0f 00 12 00 00 00 00 00 |
08:54:16.200 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.200 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.239 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.254 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:16.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:16.277 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:16.280 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:16.280 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 48 00 00 00 00 00 00 00 00 30 31 32 33 |
08:54:16.300 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.301 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.340 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:16.378 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:16.378 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:16.380 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:16.380 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 54 34 35 36 37 38 39 41 42 43 44 45 46 |
08:54:16.401 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.441 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.441 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.455 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:16.479 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:16.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:16.500 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.520 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:16.520 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 60 00 01 02 04 08 10 20 40 80 04 06 ff |
08:54:16.564 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.564 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:16.602 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:16.602 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:16.624 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:16.625 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 6c ff ff 09 07 ff ff ff 0b 08 09 0f ff |
08:54:16.625 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.669 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.683 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:16.706 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:16.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:16.728 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.728 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.736 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:16.736 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 78 0c 0a 0b ff ff 0d 10 11 12 13 0e 14 |
08:54:16.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/5/2 L_Data.ind, low priority hop count 6, tpdu 00 80 0c ab |
08:54:16.792 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:16.829 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:16.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:16.846 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:16.846 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 84 15 ff ff 00 00 00 00 00 00 00 00 00 |
08:54:16.855 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.891 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.905 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:16.929 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:16.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:16.951 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:16.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:16.962 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:16.962 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 90 d5 41 00 00 f7 41 00 00 c1 42 00 00 |
08:54:17.006 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:17.043 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:17.044 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:17.066 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.066 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.069 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:17.069 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 9c 43 40 00 00 59 40 00 00 41 42 00 00 |
08:54:17.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 04 38 |
08:54:17.132 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:17.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:17.168 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:17.194 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 07 08 |
08:54:17.250 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:17.251 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef a8 00 00 00 00 00 00 00 00 03 40 00 00 |
08:54:17.295 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.309 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:17.337 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:17.344 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:17.361 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:17.361 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef b4 0d 40 00 00 23 40 00 00 95 3f 00 00 |
08:54:17.369 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.370 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:17.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:17.449 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:17.466 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:17.466 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef c0 a9 3f 00 00 00 00 00 00 00 00 00 00 |
08:54:17.473 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.513 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.526 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:17.549 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:17.549 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:17.571 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.585 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:17.585 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef cc 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:17.629 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.644 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:17.667 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:17.667 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:17.668 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:17.670 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef d8 00 00 00 00 03 40 00 00 0d 40 00 00 |
08:54:17.688 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.688 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.729 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:17.766 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:17.766 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:17.775 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:17.776 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef e4 23 40 00 00 95 3f 00 00 a9 3f 00 00 |
08:54:17.791 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.829 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:17.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:17.866 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:17.889 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.892 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:17.893 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef f0 91 38 00 00 97 38 00 00 9d 38 00 00 |
08:54:17.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:17.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:17.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:17.974 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:17.976 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:17.976 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef fc a1 38 00 00 |
08:54:17.996 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:17.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.025 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.025 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:18.063 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:18.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:18.077 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:18.088 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.088 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.083 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x7200 with 256 bytes and CRC32 0x2897B183 |
08:54:18.118 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ee 00 01 00 72 00 00 83 b1 97 28 |
08:54:18.159 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:18.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:18.196 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:18.197 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 97,7% |
08:54:18.198 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 00 00 00 00 00 00 00 00 00 c3 3f 00 00 |
08:54:18.217 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.217 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.257 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:18.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:18.297 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:18.303 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:18.304 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 0c cd 3f 00 00 e3 3f 00 00 95 3f 00 00 |
08:54:18.319 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.359 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:18.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:18.410 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:18.412 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:18.412 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 18 a9 3f 00 00 00 00 00 00 00 00 00 00 |
08:54:18.432 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.432 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.472 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.472 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:18.510 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:18.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:18.511 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:18.512 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 24 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:18.532 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.532 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.572 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.586 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:18.610 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:18.610 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:18.613 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:18.613 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 30 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:18.633 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.673 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.673 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:18.710 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:18.711 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:18.712 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:18.712 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 3c 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:18.733 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.733 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.787 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:18.810 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:18.810 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:18.811 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:18.812 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 48 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:18.836 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.873 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:18.911 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:18.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:18.912 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:18.912 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 54 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:18.933 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.933 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.972 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:18.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:18.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:19.010 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:19.010 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:19.011 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:19.012 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 60 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:19.031 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.072 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.072 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:19.109 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:19.109 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:19.112 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:19.112 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 6c 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:19.134 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.174 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:19.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:19.212 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:19.226 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:19.227 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 78 00 00 00 00 00 00 00 00 c9 3c 00 00 |
08:54:19.236 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.274 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:19.311 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:19.311 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:19.313 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:19.313 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 84 37 3c 00 00 f1 3c 00 00 35 3e 00 00 |
08:54:19.334 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.334 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.374 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.374 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:19.412 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:19.412 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:19.414 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:19.414 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 90 75 3c 00 00 99 3c 00 00 00 00 00 00 |
08:54:19.433 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.473 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:19.511 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:19.511 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:19.534 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.534 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.571 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:19.571 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 9c 00 00 00 00 75 43 00 00 ab 43 00 00 |
08:54:19.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:19.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:19.657 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:19.681 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.681 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.699 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:19.699 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef a8 b9 43 00 00 cd 43 00 00 00 00 00 00 |
08:54:19.743 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.757 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:19.781 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:19.781 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:19.802 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.802 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.807 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:19.807 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef b4 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:19.853 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.865 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:19.888 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:19.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:19.910 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.914 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:19.915 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef c0 5b 5d 00 00 e3 38 00 00 fb 3c 00 00 |
08:54:19.959 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:19.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:19.973 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:19.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:19.996 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:20.019 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.024 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:20.025 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef cc 00 00 00 00 00 00 00 00 89 3f 00 00 |
08:54:20.069 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:20.106 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:20.106 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:20.112 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:20.112 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef d8 e7 38 00 00 00 00 00 00 00 00 00 00 |
08:54:20.128 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.168 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.182 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:20.205 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:20.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:20.230 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.237 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:20.238 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef e4 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:20.290 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.290 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:20.319 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:20.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:20.337 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:20.338 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef f0 00 00 00 00 ed 5d 00 00 e3 38 00 00 |
08:54:20.345 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.382 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.382 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.403 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:20.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:20.421 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:20.443 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.459 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:20.459 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef fc dd 5a 00 00 |
08:54:20.491 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:20.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:20.529 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:20.551 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.561 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:20.620 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x7300 with 256 bytes and CRC32 0x0728852F |
08:54:20.633 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ee 00 01 00 73 00 00 2f 85 28 07 |
08:54:20.674 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:20.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:20.723 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:20.725 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 99,2% |
08:54:20.737 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 00 00 00 00 00 00 00 00 00 89 3f 00 00 |
08:54:20.746 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.785 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.785 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.800 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:20.823 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:20.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:20.841 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:20.842 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 0c eb 38 00 00 01 39 00 00 63 44 00 00 |
08:54:20.848 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.887 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.887 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.901 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:20.924 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:20.924 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:20.946 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:20.946 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:20.947 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:20.947 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 18 00 00 00 00 09 39 00 00 fd 38 00 00 |
08:54:21.002 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.002 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:21.029 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:21.029 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:21.052 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.052 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.054 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:21.054 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 24 00 00 00 00 00 00 00 00 f5 37 00 00 |
08:54:21.099 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:21.136 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:21.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:21.158 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.158 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.198 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:21.198 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 25 5d 00 00 dd 61 00 00 21 39 00 00 |
08:54:21.244 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.244 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:21.280 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:21.280 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:21.284 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:21.284 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 3c 45 5c 00 00 a1 39 00 00 3f 3d 00 00 |
08:54:21.302 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.302 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.342 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.342 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:21.379 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:21.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:21.381 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:21.381 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 48 89 3f 00 00 bf 39 00 00 01 39 00 00 |
08:54:21.401 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.441 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.441 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.455 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:21.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:21.479 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:21.480 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:21.480 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 54 63 44 00 00 b1 38 00 00 7d 57 00 00 |
08:54:21.501 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.501 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.540 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.540 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:21.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:21.578 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:21.595 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:21.596 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 60 fd 38 00 00 ad 38 00 00 a5 38 00 00 |
08:54:21.603 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.640 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.640 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.654 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:21.681 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:21.681 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:21.703 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.705 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:21.705 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 6c c9 66 00 00 df 66 00 00 15 5d 00 00 |
08:54:21.750 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.750 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:21.787 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:21.787 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:21.789 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:21.789 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 78 00 00 00 00 00 00 00 00 c3 3f 00 00 |
08:54:21.809 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.809 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.849 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:21.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:21.895 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:21.897 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:21.897 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 84 cd 3f 00 00 e3 3f 00 00 95 3f 00 00 |
08:54:21.917 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.957 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:21.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:21.971 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:21.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:21.994 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:21.996 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:21.996 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 90 a9 3f 00 00 f7 37 00 00 fb 37 00 00 |
08:54:22.016 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.057 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.057 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:22.094 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:22.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:22.097 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:22.097 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 9c 01 38 00 00 07 38 00 00 0d 38 00 00 |
08:54:22.115 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.156 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.171 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:22.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:22.196 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:22.199 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:22.199 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef a8 13 38 00 00 19 38 00 00 1f 38 00 00 |
08:54:22.219 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.259 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:22.298 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:22.298 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:22.306 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:22.306 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef b4 25 38 00 00 2b 38 00 00 31 38 00 00 |
08:54:22.328 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.361 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.361 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:22.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:22.399 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:22.405 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:22.405 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef c0 37 38 00 00 3d 38 00 00 43 38 00 00 |
08:54:22.420 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.461 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.462 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:22.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:22.500 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:22.523 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.542 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:22.542 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef cc 49 38 00 00 4f 38 00 00 55 38 00 00 |
08:54:22.586 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.586 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.600 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:22.623 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:22.623 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:22.645 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.650 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:22.650 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef d8 5b 38 00 00 61 38 00 00 67 38 00 00 |
08:54:22.694 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.694 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.708 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:22.732 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:22.732 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:22.753 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.792 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:22.792 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef e4 6d 38 00 00 79 38 00 00 7f 38 00 00 |
08:54:22.836 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.857 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:22.874 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:22.874 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:22.895 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:22.895 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef f0 73 38 00 00 85 38 00 00 8b 38 00 00 |
08:54:22.899 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.899 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.942 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:22.942 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:22.954 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:22.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:22.978 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:22.979 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:22.980 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef fc f8 b5 c0 46 |
08:54:23.000 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.033 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:23.066 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:54:23.066 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:23.069 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:23.091 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.158 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x7400 with 256 bytes and CRC32 0xE11FC992 |
08:54:23.200 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ee 00 01 00 74 00 00 92 c9 1f e1 |
08:54:23.240 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.254 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:23.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:23.286 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:23.308 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.287 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 148 bytes: 100,0% |
08:54:23.314 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 00 f8 bc 08 bc 9e 46 70 47 05 67 00 00 |
08:54:23.359 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.359 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.372 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:23.397 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:23.397 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:23.430 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.431 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.442 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:23.442 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 0c a1 6e 00 00 f8 b5 c0 46 f8 bc 08 bc |
08:54:23.487 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:23.523 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:23.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:23.545 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.574 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:23.574 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 18 9e 46 70 47 21 41 56 50 21 40 3a 53 |
08:54:23.623 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.624 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:23.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:54:23.659 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:54:23.681 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.681 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.713 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:23.713 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 24 5f 52 4d 5f 48 36 20 31 2e 30 33 00 |
08:54:23.757 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.757 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:54:23.794 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:54:23.794 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:54:23.798 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:23.798 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 30 40 82 5c 00 78 00 00 00 29 82 69 00 |
08:54:23.816 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.816 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.856 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.856 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:54:23.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:54:23.894 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:54:23.919 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.919 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.924 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:23.924 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 3c 00 6c dc 02 00 00 00 00 ec 00 00 10 |
08:54:23.977 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:23.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:23.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:54:24.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:54:24.006 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:54:24.008 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:24.008 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 48 00 00 00 00 00 00 00 00 68 00 00 00 |
08:54:24.028 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.028 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.068 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:54:24.105 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:54:24.105 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:54:24.128 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.161 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:24.161 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 54 d0 00 00 00 00 00 00 00 00 00 00 00 |
08:54:24.205 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:54:24.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:54:24.252 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:54:24.253 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:24.253 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 60 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:24.276 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.313 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:54:24.351 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:54:24.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:54:24.364 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:24.364 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 6c 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:24.375 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.415 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.415 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.428 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:54:24.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:54:24.454 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:54:24.457 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:24.457 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 78 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:24.480 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.480 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.517 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.517 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.531 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:54:24.555 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:54:24.555 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:54:24.557 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:24.557 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 84 00 00 00 00 00 00 00 00 00 00 00 00 |
08:54:24.577 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.616 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.617 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.631 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:54:24.654 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:54:24.654 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:54:24.656 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:24.656 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 90 00 00 00 00 |
08:54:24.676 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.708 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.708 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:54:24.743 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:54:24.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:54:24.744 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:24.761 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x7500 with 148 bytes and CRC32 0x94079DC7 |
08:54:24.762 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ee 94 00 00 75 00 00 c7 9d 07 94 |
08:54:24.768 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.768 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.801 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.816 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:54:24.839 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:54:24.839 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:54:24.841 |
main |
INFO |
org.selfbus.updater.Updater |
run |
408 |
Requesting Bootloader statistic... |
08:54:24.844 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 df |
08:54:24.865 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.865 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.882 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:54:24.925 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:54:24.925 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe de 00 00 00 00 |
08:54:24.927 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
requestBootLoaderStatistic |
325 |
?[0;93m#Disconnect: 0 #repeated T_ACK: 0?[0m |
08:54:24.953 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:24.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:24.982 |
main |
INFO |
org.selfbus.updater.Updater |
printStatisticData |
253 |
Wrote 17812 bytes from file to device in 02:59. ?[0;92m(99,31 B/s)?[0m ?[0;92mDisconnect: 0?[0m ?[0;92mTimeout: 0?[0m |
08:54:25.015 |
main |
INFO |
org.selfbus.updater.Updater |
run |
420 |
?[41mPreparing boot descriptor with valid: true, start: 0x3000, end: 0x7593, size: 0x4594, crc32: 0x3FCC73FE, APP_VERSION pointer: 0x7523?[0m |
08:54:25.023 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 00 30 00 00 93 75 00 00 fe 73 cc 3f |
08:54:25.069 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:25.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:25.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:54:25.105 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:54:25.105 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:54:25.107 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:25.107 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c 23 75 00 00 |
08:54:25.127 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:25.127 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:25.156 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:25.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:25.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:54:25.195 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:54:25.195 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:54:25.197 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
08:54:25.198 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
programBootDescriptor |
304 |
Updating boot descriptor with CRC32 0x26afd3e4, length 16 |
08:54:25.198 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ed 10 00 00 00 e4 d3 af 26 |
08:54:25.223 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:25.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:25.250 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:25.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:25.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:54:25.301 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:54:25.301 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:54:25.303 |
main |
INFO |
org.selfbus.updater.Updater |
run |
426 |
Finished programming ?[0;93mdevice 1.1.98 with \...\rauchmelder-bcu1_flashstart_0x3000_release_v1.03_libv2.02.hex?[0m
|
08:54:25.323 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:25.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:25.303 |
main |
INFO |
org.selfbus.updater.Updater |
run |
427 |
?[42mFirmware Update done, Restarting device now...?[0m |
08:54:25.334 |
main |
WARN |
org.selfbus.updater.DeviceManagement |
restartProgrammingDevice |
59 |
restarting device destination 15.15.192 (TL 192.168.1.12:3671) OpenIdle, conn.-oriented, no keep-alive, no verify mode |
08:54:25.360 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6b 80 |
08:54:25.386 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:25.386 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:25.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:54:31.413 |
Calimero idle thread |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:54:31.437 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:54:31.437 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
08:54:31.448 |
main |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
log |
157 |
close connection - user request |
08:54:31.450 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
connectionClosed |
227 |
link closed |
08:54:31.452 |
Calimero link notifier |
DEBUG |
calimero.mgmt.TL 192.168.1.12:3671 |
linkClosed |
151 |
attached link was closed |
08:54:31.455 |
Calimero link notifier |
DEBUG |
calimero.mgmt.MC 192.168.1.12:3671 |
linkClosed |
191 |
attached link was closed |
08:54:31.455 |
main |
INFO |
org.selfbus.updater.Updater |
main |
109 |
|
08:54:31.456 |
main |
DEBUG |
org.selfbus.updater.Updater |
main |
110 |
main exit |