Log session start time Sat Dec 23 08:48:51 CET 2023
Date | Thread | Level | Logger | MethodOfCaller | LineOfCaller | Message |
08:48:51.752 | main | DEBUG | org.selfbus.updater.Updater | <init> | 78 | Selfbus-Updater 1.11 A Tool for updating firmware of a Selfbus device in a KNX network. Selfbus |
08:48:51.754 | main | DEBUG | org.selfbus.updater.Updater | <init> | 79 | Calimero 2.5.1 |
08:48:51.755 | main | INFO | org.selfbus.updater.Updater | <init> | 80 | ?[1;92m _____ ________ __________ __ _______ __ ______ ____ ___ ________________ / ___// ____/ / / ____/ __ )/ / / / ___/ / / / / __ \/ __ \/ |/_ __/ ____/ __ \ \__ \/ __/ / / / /_ / __ / / / /\__ \ / / / / /_/ / / / / /| | / / / __/ / /_/ / ___/ / /___/ /___/ __/ / /_/ / /_/ /___/ / / /_/ / ____/ /_/ / ___ |/ / / /___/ _, _/ /____/_____/_____/_/ /_____/\____//____/ \____/_/ /_____/_/ |_/_/ /_____/_/ |_| by Dr. Stefan Haller, Oliver Stefan et al. Selfbus-Updater 1.11 ?[0m |
08:48:51.780 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 364 | cli: 192.168.1.12 --fileName .\\out8-bcu1_flashstart_0x3000_release_o8_4t_ha_v5.10_libv2.02.hex --full |
08:48:51.781 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 379 | logLevel=DEBUG |
08:48:51.781 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 390 | priority=low |
08:48:51.781 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 407 | NO_FLASH=false |
08:48:51.782 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 412 | eraseFlash=false |
08:48:51.782 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 419 | dumpFlashStartAddress=-1 |
08:48:51.782 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 420 | dumpFlashEndAddress=-1 |
08:48:51.782 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 425 | full=true |
08:48:51.782 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 430 | routing=false |
08:48:51.783 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 435 | nat=false |
08:48:51.783 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 440 | fileName=.\\out8-bcu1_flashstart_0x3000_release_o8_4t_ha_v5.10_libv2.02.hex |
08:48:51.784 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 449 | localhost=null |
08:48:51.785 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 454 | localport=0 |
08:48:51.785 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 459 | port=3671 |
08:48:51.785 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 464 | medium=tp1 |
08:48:51.785 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 473 | delay=0 |
08:48:51.785 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 478 | tl4Timeout=false |
08:48:51.786 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 483 | uid= |
08:48:51.786 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 489 | appVersionPtr=0 |
08:48:51.786 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 496 | device=null |
08:48:51.787 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 502 | progDevice=15.15.192 |
08:48:51.787 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 507 | ownAddress=0.0.0 |
08:48:51.787 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 512 | ft12= |
08:48:51.787 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 517 | tpuart= |
08:48:51.788 | main | DEBUG | org.selfbus.updater.Utils | parseHost | 64 | Resolved 192.168.1.12 with /192.168.1.12 |
08:48:51.788 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 527 | knxInterface=/192.168.1.12 |
08:48:51.788 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 547 | logStatistics=false |
08:48:51.789 | main | DEBUG | org.selfbus.updater.Updater | createLink | 145 | Creating KNX network link TP1 medium, device 0.0.0... |
08:48:51.831 | main | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | connect | 187 | establish connection from 192.168.1.209:53209 to 192.168.1.12:3671 (udp) |
08:48:51.833 | main | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | connect | 202 | wait for connect response from 192.168.1.12:3671 ... |
08:48:51.843 | main | INFO | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | connect | 213 | connection established (data endpoint 192.168.1.12:3671, channel 3, tunneling address 1.0.14) |
08:48:51.848 | main | DEBUG | calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 | connect | 187 | establish connection from 192.168.1.209:53210 to 192.168.1.12:3671 (udp) |
08:48:51.849 | main | DEBUG | calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 | connect | 202 | wait for connect response from 192.168.1.12:3671 ... |
08:48:51.853 | main | INFO | calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 | connect | 213 | connection established (data endpoint 192.168.1.12:3671, channel 4) |
08:48:51.868 | main | DEBUG | calimero.link.192.168.1.12:3671 | setMaxApduLength | 515 | using max. APDU length of 220 |
08:48:51.872 | main | DEBUG | calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 | log | 157 | close connection - user request |
08:48:51.874 | main | DEBUG | org.selfbus.updater.DeviceManagement | <init> | 50 | Creating SBManagementClientImpl |
08:48:51.901 | main | INFO | org.selfbus.updater.Updater | run | 297 | KNX connection: tunneling link 192.168.1.12:3671 TP1 medium, device 0.0.0, hopcount 6 |
08:48:51.912 | main | INFO | org.selfbus.updater.Updater | run | 299 | Telegram priority: low |
08:48:51.915 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->0/0/0 L_Data.req, system priority hop count 6 repeat, tpdu 01 00 |
08:48:51.980 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->0/0/0 L_Data.ind, system priority hop count 6 repeat, tpdu 01 40 |
08:48:52.038 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->0/0/0 |
08:48:52.039 | KNXnet/IP receiver | WARN | calimero.link.192.168.1.12:3671 | frameReceived | 212 | negative confirmation of 0/0/0: 2e 00 91 e0 10 0e 00 00 01 01 00 |
08:48:53.905 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 07 08 |
08:48:53.931 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 0c 38 |
08:48:54.525 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.34->6/1/12 L_Data.ind, low priority hop count 6, tpdu 00 80 07 0b |
08:48:54.691 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.36->13/3/0 L_Data.ind, low priority hop count 6, tpdu 00 80 00 00 |
08:48:55.057 | main | DEBUG | calimero.mgmt.TL 192.168.1.12:3671 | detach | 430 | detached from tunneling link 192.168.1.12:3671 TP1 medium, device 0.0.0, hopcount 6 |
08:48:55.058 | main | INFO | org.selfbus.updater.DeviceManagement | requestUIDFromDevice | 113 | Requesting UID from 15.15.192... |
08:48:55.061 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80 |
08:48:55.084 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:55.085 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:55.089 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 be |
08:48:55.114 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:55.115 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:55.130 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:48:55.169 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe bd 52 c0 01 10 c8 10 65 af cd e0 fa 5d |
08:48:55.171 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:48:55.194 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:55.194 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:55.175 | main | INFO | org.selfbus.updater.DeviceManagement | requestUIDFromDevice | 124 | got: 52:C0:01:10:C8:10:65:AF:CD:E0:FA:5D length 12 |
08:48:55.208 | main | INFO | org.selfbus.updater.DeviceManagement | unlockDeviceWithUID | 202 | Unlocking device 15.15.192 with UID 52:C0:01:10:C8:10:65:AF:CD:E0:FA:5D... |
08:48:55.229 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 bf 52 c0 01 10 c8 10 65 af cd e0 fa 5d |
08:48:55.279 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:55.280 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:55.287 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:48:55.311 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:48:55.311 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:48:55.334 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:55.335 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:55.314 | main | INFO | org.selfbus.updater.DeviceManagement | requestBootloaderIdentity | 137 | Requesting Bootloader Identity... |
08:48:55.350 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 b8 01 0b |
08:48:55.378 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:55.379 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:55.394 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:48:55.430 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe b7 01 0b 00 01 02 02 00 2d 00 00 |
08:48:55.434 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:48:55.436 | main | INFO | org.selfbus.updater.DeviceManagement | requestBootloaderIdentity | 160 | Device Bootloader: ?[0;93mVersion: 1.11, sbLib Version: 2.02, Features: 0x0100, App-start: 0x2D00?[0m |
08:48:55.439 | main | INFO | org.selfbus.updater.Updater | run | 328 | Requesting App Version String... |
08:48:55.440 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 bc |
08:48:55.456 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:55.457 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:55.478 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:55.478 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:55.493 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:48:55.532 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe bb ff ff ff ff ff ff ff ff ff ff ff ff |
08:48:55.538 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:48:55.540 | main | INFO | org.selfbus.updater.Updater | run | 331 | Current App Version String is: ?[0;92mÿÿÿÿÿÿÿÿÿÿÿÿ?[0m |
08:48:55.550 | main | INFO | org.selfbus.updater.Updater | run | 338 | Loading file '.\\out8-bcu1_flashstart_0x3000_release_o8_4t_ha_v5.10_libv2.02.hex'... |
08:48:55.560 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:55.560 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:55.620 | main | INFO | org.selfbus.updater.Updater | run | 340 | Hex file parsed: start 0x3000, end 0x7B4B, length 19276, crc32 0x60D64083 |
08:48:55.817 | main | INFO | org.selfbus.updater.Updater | run | 364 | File App Version String is : ?[0;92mO08.10 5.10?[0m found at address 0x4adf |
08:48:55.819 | main | INFO | org.selfbus.updater.Updater | run | 379 | ?[0;93mInfo: There are 768 bytes of unused flash between bootloader and firmware.?[0m |
08:48:55.820 | main | INFO | org.selfbus.updater.DeviceManagement | requestBootDescriptor | 176 | Requesting Boot Descriptor... |
08:48:55.820 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ba |
08:48:55.853 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:55.853 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:55.861 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:48:55.900 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe b9 00 30 00 00 4b 7b 00 00 83 40 d6 60 |
08:48:55.906 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:48:55.908 | main | INFO | org.selfbus.updater.DeviceManagement | requestBootDescriptor | 186 | Current firmware: valid: true, start: 0x3000, end: 0x7B4B, size: 0x4B4C, crc32: 0x60D64083 |
08:48:55.909 | main | INFO | org.selfbus.updater.Updater | run | 400 | ?[0;30m?[42mStarting to send new firmware now:?[0m |
08:48:55.911 | main | INFO | org.selfbus.updater.DeviceManagement | eraseAddressRange | 216 | Erasing firmware address range: 0x3000 - 0x7B4B... |
08:48:55.912 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 e9 00 30 00 00 4b 7b 00 00 |
08:48:55.929 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:55.930 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:55.962 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:55.962 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.356 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:48:57.379 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:48:57.380 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:48:57.382 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 41 | Start sending application data (19276 bytes) with telegram delay of 0ms |
08:48:57.385 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 1,3% |
08:48:57.389 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 00 00 20 00 10 0b 31 00 00 d5 30 00 00 |
08:48:57.403 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:57.403 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.443 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:57.443 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.462 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:48:57.480 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:48:57.480 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:48:57.500 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:57.500 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 0c 9d 6e 00 00 00 00 00 00 00 00 00 00 |
08:48:57.503 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:57.504 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.547 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:57.548 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.562 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:48:57.585 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:48:57.585 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:48:57.588 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:57.592 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 18 00 00 00 00 83 0f ff ef 00 00 00 00 |
08:48:57.608 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:57.609 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.648 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:57.648 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.663 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:48:57.686 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:48:57.686 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:48:57.693 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:57.694 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 24 00 00 00 00 00 00 00 00 d9 30 00 00 |
08:48:57.709 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:57.709 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.748 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:57.748 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.763 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:48:57.786 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:48:57.786 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:48:57.788 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:57.788 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 30 00 00 00 00 00 00 00 00 db 30 00 00 |
08:48:57.808 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:57.808 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.848 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:57.848 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.862 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:48:57.885 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:48:57.886 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:48:57.888 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:57.888 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 3c 8d 6e 00 00 df 30 00 00 df 30 00 00 |
08:48:57.908 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:57.909 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.948 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:57.948 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:57.963 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:48:57.986 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:48:57.986 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:48:57.987 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:57.990 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 48 df 30 00 00 df 30 00 00 df 30 00 00 |
08:48:58.008 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.008 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.047 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.048 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.062 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:48:58.085 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:48:58.085 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:48:58.088 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:58.088 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 54 df 30 00 00 df 30 00 00 df 30 00 00 |
08:48:58.108 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.108 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.148 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.148 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.162 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:48:58.185 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:48:58.186 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:48:58.189 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:58.189 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 60 df 30 00 00 df 30 00 00 df 30 00 00 |
08:48:58.209 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.209 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.249 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.249 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.263 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:48:58.286 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:48:58.286 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:48:58.289 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:58.292 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 6c df 30 00 00 df 30 00 00 df 30 00 00 |
08:48:58.309 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.309 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.349 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.349 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.363 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:48:58.386 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:48:58.386 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:48:58.399 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:58.399 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 78 df 30 00 00 df 30 00 00 df 30 00 00 |
08:48:58.412 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.412 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.449 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.450 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.464 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:48:58.487 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:48:58.487 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:48:58.511 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.511 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.516 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:58.516 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 84 7d 6e 00 00 df 30 00 00 df 30 00 00 |
08:48:58.562 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.562 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.576 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:48:58.599 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:48:58.600 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:48:58.614 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:58.614 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 90 df 30 00 00 df 30 00 00 00 00 00 00 |
08:48:58.623 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.624 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.663 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.663 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.677 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:48:58.701 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:48:58.701 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:48:58.724 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.724 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.726 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:58.726 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 9c 00 00 00 00 f5 35 00 00 df 30 00 00 |
08:48:58.771 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.771 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.785 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:48:58.809 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:48:58.809 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:48:58.832 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.832 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.834 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:58.834 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef a8 df 30 00 00 00 00 00 00 df 30 00 00 |
08:48:58.879 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.879 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.893 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:48:58.917 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:48:58.917 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:48:58.939 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:58.939 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:58.975 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:58.975 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef b4 df 30 00 00 df 30 00 00 df 30 00 00 |
08:48:59.021 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.025 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.035 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:48:59.058 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:48:59.059 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:48:59.084 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.085 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.092 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:59.093 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef c0 d8 7a 00 00 c0 00 00 10 74 00 00 00 |
08:48:59.138 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.138 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.152 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:48:59.175 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:48:59.175 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:48:59.201 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.201 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.213 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:59.213 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef cc 34 01 00 10 cc 01 00 00 fe e7 fe e7 |
08:48:59.263 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.263 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.277 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:48:59.300 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:48:59.301 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:48:59.323 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.324 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.326 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:59.326 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef d8 fe e7 fe e7 fe e7 fe e7 00 23 30 b5 |
08:48:59.375 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.376 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.387 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:48:59.410 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:48:59.411 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:48:59.426 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:59.427 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef e4 5d 18 1c 18 93 42 00 d3 30 bd 24 68 |
08:48:59.438 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.438 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.473 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.473 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.487 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:48:59.511 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:48:59.511 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:48:59.533 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.533 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.555 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:59.555 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef f0 04 33 2c 60 f6 e7 00 23 10 b5 1c 00 |
08:48:59.600 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.600 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.614 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:48:59.637 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:48:59.637 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:48:59.660 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.661 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.679 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:59.679 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef fc 1a 18 8b 42 |
08:48:59.712 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.712 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.727 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:48:59.750 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:48:59.750 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:48:59.773 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.773 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.778 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:59.811 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3000 with 256 bytes and CRC32 0xF44F9818 |
08:48:59.815 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ee 00 01 00 30 00 00 18 98 4f f4 |
08:48:59.856 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.857 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.871 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:48:59.894 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:48:59.894 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:48:59.897 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 2,7% |
08:48:59.897 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 00 00 d3 10 bd 14 60 04 33 f8 e7 10 b5 |
08:48:59.917 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.917 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.958 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:48:59.958 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:48:59.971 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:48:59.995 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:48:59.995 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:48:59.998 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:48:59.998 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 0c 0d 4c 0e 4b 9c 42 09 d3 0d 4b 9c 42 |
08:49:00.018 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.018 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.058 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.059 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.072 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:00.096 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:00.096 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:00.100 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:00.100 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 18 0d d3 03 f0 2f ff 04 f0 f9 f8 03 f0 |
08:49:00.119 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.119 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.159 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.159 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.173 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:00.197 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:00.197 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:00.200 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:00.200 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 24 e7 fe fe e7 a2 68 61 68 20 68 ff f7 |
08:49:00.220 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.220 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.260 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.260 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.274 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:00.297 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:00.297 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:00.299 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:00.300 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 30 d7 ff 0c 34 eb e7 61 68 20 68 ff f7 |
08:49:00.319 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.319 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.359 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.359 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.373 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:00.397 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:00.398 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:00.399 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:00.399 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 3c dc ff 08 34 e8 e7 c0 46 c0 30 00 00 |
08:49:00.420 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.420 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.459 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.459 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.474 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:00.497 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:00.497 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:00.501 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:00.502 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 48 cc 30 00 00 d4 30 00 00 00 29 06 d0 |
08:49:00.520 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.520 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.560 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.560 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.574 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:00.598 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:00.598 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:00.600 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:00.600 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 54 04 4b 1b 68 cb 18 01 21 99 42 00 d2 |
08:49:00.619 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.620 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.659 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.659 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.673 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:00.697 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:00.697 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:00.699 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:00.700 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 60 19 00 01 60 70 47 c0 46 a0 02 00 10 |
08:49:00.721 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.721 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.760 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.760 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.774 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:00.797 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:00.798 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:00.800 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:00.801 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 6c 03 00 01 68 00 20 81 42 06 d0 04 4a |
08:49:00.822 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.822 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.861 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.861 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.875 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:00.898 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:00.899 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:00.922 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.922 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.924 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:00.924 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 78 12 68 52 1a 82 42 01 db 18 60 01 30 |
08:49:00.969 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:00.969 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:00.983 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:01.006 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:01.011 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:01.033 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.034 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.048 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:01.049 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 84 70 47 c0 46 a0 02 00 10 f8 b5 43 60 |
08:49:01.093 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.094 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.108 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:01.131 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:01.131 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:01.157 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.157 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.171 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:01.171 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 90 06 9b 00 25 83 60 01 23 04 00 1f 27 |
08:49:01.216 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.217 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.231 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:01.253 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:01.254 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:01.269 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:01.269 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 9c 03 61 09 33 02 60 c5 60 43 61 83 61 |
08:49:01.278 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.279 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.317 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.318 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.332 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:01.355 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:01.355 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:01.377 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:01.378 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef a8 c5 61 01 62 23 68 9d 42 09 d3 60 68 |
08:49:01.378 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.378 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.422 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.422 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.436 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:01.472 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:01.472 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:01.493 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:01.494 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef b4 10 21 01 f0 8d ff 0e 48 a1 68 ff f7 |
08:49:01.500 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.500 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.538 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.539 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.553 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:01.576 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:01.576 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:01.598 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.599 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.603 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:01.603 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef c0 c7 ff 20 00 f8 bd c0 21 23 6a ae 00 |
08:49:01.647 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.648 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.661 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:01.685 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:01.685 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:01.703 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:01.703 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef cc 98 59 c9 01 01 f0 80 ff 23 6a 08 4a |
08:49:01.709 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.709 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.748 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.748 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.762 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:01.785 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:01.785 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:01.808 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.808 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.815 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:01.815 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef d8 9b 59 01 35 19 00 5b 06 9b 0f 9b 00 |
08:49:01.859 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.860 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.873 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:01.897 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:01.897 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:01.920 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.920 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:01.941 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:01.941 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef e4 9a 58 04 23 39 40 8b 40 00 21 99 50 |
08:49:01.987 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:01.988 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.002 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:02.025 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:02.026 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:02.049 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.049 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.059 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:02.060 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef f0 dc e7 c0 46 38 01 00 10 b8 77 00 00 |
08:49:02.104 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.105 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.119 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:02.142 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:02.142 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:02.164 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.164 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.189 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:02.189 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef fc 03 00 f0 b5 |
08:49:02.222 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.222 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.236 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:02.266 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:02.266 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:02.289 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.289 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.310 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:02.322 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3100 with 256 bytes and CRC32 0x9D07838F |
08:49:02.322 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ee 00 01 00 31 00 00 8f 83 07 9d |
08:49:02.363 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.363 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.377 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:02.400 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:02.410 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:02.412 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 4,0% |
08:49:02.413 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 00 1c 33 87 b0 04 00 18 00 01 93 ff f7 |
08:49:02.432 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.432 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.472 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.472 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.486 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:02.510 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:02.510 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:02.513 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:02.513 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 0c af ff 00 28 03 d1 e3 69 00 2b 00 d0 |
08:49:02.533 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.533 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.573 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.573 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.587 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:02.610 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:02.610 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:02.612 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:02.612 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 18 fd e0 e3 68 a2 7c 01 20 1a 41 11 00 |
08:49:02.632 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.632 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.672 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.672 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.686 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:02.710 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:02.710 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:02.712 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:02.712 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 24 8a 4d 01 40 02 42 0c d0 22 6a 9e 00 |
08:49:02.736 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.736 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.773 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.773 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.787 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:02.810 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:02.810 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:02.813 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:02.813 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 30 b2 58 1f 26 16 40 b0 40 00 26 52 06 |
08:49:02.833 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.834 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.873 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.874 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.888 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:02.911 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:02.911 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:02.915 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:02.916 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 3c 92 0f 92 00 aa 58 80 00 86 50 03 20 |
08:49:02.935 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.935 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.974 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:02.974 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:02.988 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:03.012 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:03.012 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:03.015 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:03.015 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 48 66 68 84 46 72 11 02 40 92 00 af 58 |
08:49:03.036 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.036 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.075 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.075 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.089 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:03.113 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:03.113 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:03.124 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:03.124 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 54 1f 22 02 38 16 40 02 00 b2 40 96 00 |
08:49:03.136 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.136 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.176 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.176 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.190 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:03.214 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:03.214 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:03.235 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:03.235 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 60 f2 59 00 92 00 2a 00 d0 a4 e0 22 68 |
08:49:03.238 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.238 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.280 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.280 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.294 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:03.317 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:03.317 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:03.339 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.340 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.344 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:03.344 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 6c 00 99 02 92 77 4a 03 92 02 9a 91 42 |
08:49:03.390 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.390 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.403 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:03.428 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:03.429 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:03.450 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.450 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.483 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:03.483 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 78 5f d1 05 20 02 f0 84 ff 1f 21 62 68 |
08:49:03.531 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.531 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.546 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:03.568 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:03.568 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:03.582 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:03.582 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 84 8c 46 53 11 0a 40 1e 39 08 00 03 26 |
08:49:03.592 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.593 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.631 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.631 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.645 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:03.669 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:03.669 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:03.685 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:03.685 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 90 90 40 33 40 9b 00 eb 58 82 00 d3 58 |
08:49:03.696 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.696 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.732 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.732 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.746 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:03.770 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:03.770 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:03.789 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:03.789 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 9c 03 93 23 68 04 93 6c 4b 1b 78 02 93 |
08:49:03.795 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.795 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.833 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.834 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.848 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:03.871 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:03.871 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:03.896 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.896 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.929 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:03.929 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef a8 69 4b 05 93 00 9b 04 9a 93 42 57 d1 |
08:49:03.975 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:03.975 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:03.989 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:04.012 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:04.012 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:04.021 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:04.022 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef b4 03 99 e5 68 62 7c 23 7c 00 29 00 d0 |
08:49:04.037 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.037 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.074 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.074 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.088 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:04.111 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:04.111 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:04.134 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.134 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.165 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:04.165 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef c0 91 e0 1a 42 02 d1 01 31 ff 31 0d 43 |
08:49:04.210 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.210 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.224 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:04.248 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:04.248 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:04.262 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:04.262 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef cc 13 43 63 74 22 7c e3 68 52 00 22 74 |
08:49:04.273 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.273 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.312 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.312 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.332 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:04.349 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:04.349 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:04.373 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.373 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.397 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:04.397 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef d8 22 68 01 33 e3 60 93 42 00 d0 96 e0 |
08:49:04.442 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.442 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.456 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:04.480 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:04.480 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:04.492 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:04.492 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef e4 00 23 a1 69 e3 60 01 33 23 74 01 98 |
08:49:04.503 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.503 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.541 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.541 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.556 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:04.579 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:04.579 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:04.602 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.603 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.624 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:04.624 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef f0 ff f7 2e ff 58 4e 30 00 ff f7 38 ff |
08:49:04.668 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.669 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.683 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:04.706 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:04.706 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:04.711 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:04.711 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef fc 00 28 02 d1 |
08:49:04.728 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.729 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.757 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.757 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.772 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:04.795 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:04.795 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:04.820 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.820 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.846 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:04.888 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3200 with 256 bytes and CRC32 0xD194626B |
08:49:04.913 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ee 00 01 00 32 00 00 6b 62 94 d1 |
08:49:04.956 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:04.956 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:04.968 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:04.991 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:04.993 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:04.994 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 5,3% |
08:49:05.006 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 00 33 68 00 2b 16 d1 23 68 01 21 00 93 |
08:49:05.017 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.017 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.055 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.055 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.070 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:05.093 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:05.093 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:05.116 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.116 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.130 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:05.130 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 0c 51 4b 00 22 1f 78 3b 00 58 1e 83 41 |
08:49:05.175 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.177 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.189 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:05.212 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:05.213 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:05.217 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:05.217 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 18 5b 42 01 93 00 9b 9a 42 00 d0 7b e0 |
08:49:05.238 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.238 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.276 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.276 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.290 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:05.313 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:05.319 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:05.322 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:05.322 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 24 01 22 4b 4b 7a 40 4b 48 a1 68 1a 70 |
08:49:05.341 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.341 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.381 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.381 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.395 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:05.419 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:05.419 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:05.422 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:05.423 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 30 ff f7 0e ff 28 00 07 b0 f0 bd 8b 42 |
08:49:05.442 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.442 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.482 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.483 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.496 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:05.520 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:05.520 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:05.523 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:05.543 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.543 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.533 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 3c 10 d0 26 6a 8f 00 bf 59 1f 22 3e 00 |
08:49:05.598 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.598 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.612 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:05.635 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:05.636 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:05.639 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:05.639 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 48 16 40 02 00 b2 40 16 00 62 46 7f 11 |
08:49:05.658 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.659 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.698 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.699 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.713 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:05.736 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:05.736 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:05.739 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:05.739 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 54 17 40 03 9a bf 00 bf 58 b2 00 d6 51 |
08:49:05.759 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.759 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.802 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.802 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.813 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:05.842 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:05.843 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:05.846 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:05.846 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 60 01 31 87 e7 00 9a 23 6a 92 00 d3 58 |
08:49:05.865 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.866 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.905 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.905 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:05.919 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:05.943 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:05.943 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:05.945 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:05.946 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 6c 62 46 01 25 1a 40 95 40 e2 7c 5b 11 |
08:49:05.966 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:05.966 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.006 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.006 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.020 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:06.043 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:06.045 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:06.047 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:06.048 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 78 af 00 11 42 0e d0 02 98 33 40 42 1e |
08:49:06.067 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.067 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.107 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.107 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.121 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:06.144 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:06.144 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:06.146 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:06.146 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 84 90 41 32 4a 9b 00 9b 58 40 42 28 40 |
08:49:06.166 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.167 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.207 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.207 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.221 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:06.244 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:06.244 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:06.248 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:06.248 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 90 d8 51 00 9b 49 00 01 33 00 93 87 e7 |
08:49:06.267 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.267 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.306 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.307 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.321 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:06.344 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:06.344 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:06.365 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.366 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.400 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:06.400 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 9c a2 7c 33 40 0a 40 50 1e 82 41 05 98 |
08:49:06.445 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.445 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.459 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:06.482 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:06.482 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:06.505 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.505 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.526 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:06.526 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef a8 9b 00 1b 58 52 42 2a 40 da 51 ee e7 |
08:49:06.571 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.571 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.585 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:06.608 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:06.608 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:06.620 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:06.620 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef b4 26 6a 9f 00 1f 22 be 59 07 00 32 40 |
08:49:06.632 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.632 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.669 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.670 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.684 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:06.707 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:06.707 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:06.729 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.730 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.745 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:06.745 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef c0 97 40 3a 00 e7 7c 1f 41 73 11 96 00 |
08:49:06.789 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.790 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.804 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:06.827 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:06.827 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:06.849 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.849 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.861 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:06.861 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef cc 07 42 14 d0 20 49 09 78 48 1e 81 41 |
08:49:06.905 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.906 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.920 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:06.943 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:06.943 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:06.966 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:06.966 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:06.999 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:06.999 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef d8 49 42 0a 40 61 46 0b 40 9b 00 eb 58 |
08:49:07.043 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.043 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.057 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:07.081 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:07.082 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:07.093 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:07.093 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef e4 9a 51 63 7c 22 7c 1a 42 0e d0 80 25 |
08:49:07.105 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.105 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.148 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.148 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.160 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:07.182 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:07.182 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:07.205 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.206 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.217 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:07.217 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef f0 e1 68 ad 00 0d 43 93 43 69 e7 00 29 |
08:49:07.261 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.261 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.276 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:07.299 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:07.300 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:07.303 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:07.303 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef fc 00 d0 11 00 |
08:49:07.323 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.323 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.351 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.352 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.366 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:07.390 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:07.390 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:07.405 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:07.412 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.412 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.437 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3300 with 256 bytes and CRC32 0xFA7D5EC5 |
08:49:07.441 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ee 00 01 00 33 00 00 c5 5e 7d fa |
08:49:07.481 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.481 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.496 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:07.519 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:07.519 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:07.522 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 6,6% |
08:49:07.527 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 00 03 22 13 40 9b 00 eb 58 99 51 ec e7 |
08:49:07.547 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.547 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.583 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.583 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.597 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:07.620 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:07.621 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:07.622 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:07.622 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 0c 01 25 6d 42 5e e7 61 69 6b e7 01 25 |
08:49:07.642 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.642 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.682 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.690 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.696 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:07.721 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:07.721 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:07.723 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:07.724 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 18 6d 42 6b e7 e3 7c 19 42 12 d0 23 6a |
08:49:07.744 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.744 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.785 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.785 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.798 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:07.822 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:07.822 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:07.824 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:07.824 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 24 90 00 c3 58 1f 20 01 26 18 40 86 40 |
08:49:07.845 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.845 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.884 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.884 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.899 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:07.929 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:07.929 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:07.931 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:07.931 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 30 30 00 01 9e 5b 06 06 40 b4 46 9b 0f |
08:49:07.951 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.951 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:07.991 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:07.991 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.005 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:08.028 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:08.028 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:08.030 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:08.030 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 3c 04 4e 9b 00 9b 59 66 46 80 00 c6 50 |
08:49:08.050 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.050 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.090 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.090 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.104 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:08.128 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:08.128 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:08.131 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:08.131 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 48 01 32 49 00 66 e7 c0 46 b8 77 00 00 |
08:49:08.151 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.151 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.191 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.191 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.205 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:08.229 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:08.229 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:08.231 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:08.231 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 54 34 01 00 10 38 01 00 10 70 b5 14 00 |
08:49:08.251 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.251 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.291 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.291 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.305 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:08.328 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:08.328 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:08.332 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:08.332 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 60 0d 00 ff f7 cb fe 03 00 01 30 42 1e |
08:49:08.352 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.352 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.391 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.392 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.406 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:08.429 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:08.430 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:08.432 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:08.432 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 6c 90 41 c0 b2 5a 1c 05 d0 ff 22 19 00 |
08:49:08.452 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.452 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.493 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.493 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.506 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:08.529 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:08.529 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:08.532 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:08.532 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 78 93 43 11 40 29 60 23 80 70 bd ff ff |
08:49:08.552 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.553 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.592 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.593 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.607 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:08.630 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:08.632 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:08.637 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:08.637 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 84 f0 b5 0e 00 01 68 b1 42 18 d9 01 6a |
08:49:08.653 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.654 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.694 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.694 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.708 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:08.731 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:08.731 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:08.754 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.754 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.791 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:08.791 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 90 b4 00 64 58 01 21 1f 25 0f 00 25 40 |
08:49:08.836 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.836 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.850 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:08.873 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:08.873 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:08.876 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:08.876 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 9c af 40 b1 40 64 06 0c 4e a4 0f a4 00 |
08:49:08.897 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.897 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.937 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.937 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:08.952 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:08.975 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:08.975 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:08.998 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:08.998 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.010 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:09.010 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef a8 a6 59 85 7c c9 b2 bc 00 00 2a 06 d1 |
08:49:09.055 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.055 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.070 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:09.092 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:09.092 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:09.116 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.116 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.129 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:09.130 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef b4 32 51 c3 7c 8d 43 8b 43 85 74 c3 74 |
08:49:09.174 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.174 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.188 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:09.211 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:09.211 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:09.240 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.240 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.248 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:09.248 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef c0 f0 bd 0d 43 37 51 85 74 00 2b f9 d0 |
08:49:09.292 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.293 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.307 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:09.330 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:09.330 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:09.338 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:09.338 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef cc c3 7c 19 43 c1 74 f5 e7 b8 77 00 00 |
08:49:09.352 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.352 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.393 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.393 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.407 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:09.430 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:09.430 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:09.448 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:09.449 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef d8 41 61 70 47 81 61 70 47 00 22 01 4b |
08:49:09.457 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.457 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.494 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.494 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.508 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:09.531 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:09.531 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:09.539 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:09.540 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef e4 1a 60 70 47 38 01 00 10 01 22 83 68 |
08:49:09.557 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.557 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.594 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.594 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.608 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:09.632 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:09.632 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:09.654 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.654 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.655 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:09.655 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef f0 01 68 9a 40 0a 43 3a 49 04 33 70 b5 |
08:49:09.702 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.702 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.716 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:09.739 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:09.739 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:09.752 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:09.752 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef fc 9b 00 0a 60 |
08:49:09.763 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.763 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.791 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.791 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.806 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:09.829 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:09.829 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:09.841 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:09.851 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.851 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.874 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3400 with 256 bytes and CRC32 0x235E20C4 |
08:49:09.879 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ee 00 01 00 34 00 00 c4 20 5e 23 |
08:49:09.918 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.918 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:09.933 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:09.956 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:09.956 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:09.958 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 8,0% |
08:49:09.958 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 00 04 00 58 58 00 28 28 da 43 00 26 d4 |
08:49:09.982 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:09.982 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.019 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.020 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.035 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:10.057 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:10.057 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:10.059 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:10.059 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 0c 00 04 83 0d 34 48 35 49 58 43 03 f0 |
08:49:10.082 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.083 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.120 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.120 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.134 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:10.157 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:10.157 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:10.160 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:10.160 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 18 75 fd a3 6b 01 33 a3 63 a3 6b 01 2b |
08:49:10.181 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.182 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.221 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.221 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.235 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:10.259 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:10.259 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:10.260 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:10.261 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 24 02 d9 63 6b 18 18 40 08 60 63 a3 6b |
08:49:10.281 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.281 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.321 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.321 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.335 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:10.359 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:10.359 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:10.362 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:10.362 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 30 63 2b 12 d9 62 6b e3 6a 9a 42 23 dc |
08:49:10.382 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.382 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.422 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.422 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.437 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:10.459 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:10.460 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:10.465 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:10.465 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 3c 00 22 2b 4b 22 64 19 68 e0 6b e5 6b |
08:49:10.485 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.485 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.525 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.525 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.539 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:10.562 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:10.563 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:10.566 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:10.569 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 48 95 42 07 d0 88 42 05 d8 1b 68 e1 6b |
08:49:10.586 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.586 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.626 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.626 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.640 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:10.663 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:10.663 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:10.665 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:10.665 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 54 60 6c 90 42 08 d1 70 bd 40 21 24 4a |
08:49:10.685 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.685 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.725 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.725 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.739 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:10.763 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:10.763 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:10.764 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:10.764 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 60 92 68 fc 32 51 60 1b 68 e3 63 f6 e7 |
08:49:10.785 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.785 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.825 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.825 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.839 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:10.862 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:10.862 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:10.864 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:10.864 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 6c 5b 1a a1 69 99 42 f2 d8 20 6a 62 64 |
08:49:10.884 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.884 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.924 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.924 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:10.938 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:10.961 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:10.961 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:10.963 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:10.963 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 78 00 28 ee d0 03 68 1b 68 98 47 ea e7 |
08:49:10.983 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:10.983 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.023 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.023 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.037 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:11.061 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:11.062 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:11.079 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:11.079 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 84 62 6b 23 6b 9a 42 e6 dd 00 23 e3 63 |
08:49:11.088 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.088 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.126 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.126 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.139 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:11.162 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:11.162 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:11.182 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:11.183 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 90 16 4b 1a 68 21 6c 20 6c 00 28 18 d0 |
08:49:11.184 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.184 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.228 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.228 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.242 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:11.265 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:11.265 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:11.278 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:11.278 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 9c 91 42 16 d8 1b 68 22 6c 61 6c 01 29 |
08:49:11.292 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.292 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.328 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.328 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.342 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:11.365 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:11.366 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:11.390 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.390 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.402 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:11.403 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef a8 d7 d0 9b 1a e2 69 9a 42 d3 d8 63 6c |
08:49:11.448 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.448 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.462 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:11.485 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:11.485 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:11.509 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:11.509 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef b4 ff 2b 07 d0 01 23 20 6a 63 64 00 28 |
08:49:11.511 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.511 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.554 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.555 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.569 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:11.592 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:11.592 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:11.607 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:11.607 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef c0 02 d0 03 68 5b 68 98 47 01 23 63 64 |
08:49:11.616 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.617 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.654 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.654 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.668 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:11.691 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:11.691 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:11.698 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:11.698 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef cc c5 e7 00 21 07 4a 92 68 fc 32 51 60 |
08:49:11.715 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.715 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.753 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.753 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.768 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:11.790 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:11.790 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:11.808 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:11.808 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef d8 1b 68 23 64 bd e7 c0 46 00 c0 01 40 |
08:49:11.816 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.817 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.854 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.854 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.868 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:11.892 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:11.892 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:11.915 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.915 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.923 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:11.923 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef e4 4d 0d 00 00 ff 03 00 00 a0 02 00 10 |
08:49:11.968 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:11.968 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:11.982 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:12.005 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:12.005 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:12.012 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:12.012 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef f0 b8 77 00 00 10 b5 02 48 ff f7 78 ff |
08:49:12.028 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.028 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.067 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.068 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.082 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:12.105 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:12.105 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:12.130 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.130 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.234 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:12.234 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef fc 10 bd c0 46 |
08:49:12.277 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.277 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.281 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:12.305 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:12.305 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:12.307 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:12.327 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.327 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.333 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3500 with 256 bytes and CRC32 0x11B2019C |
08:49:12.334 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ee 00 01 00 35 00 00 9c 01 b2 11 |
08:49:12.377 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.377 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.391 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:12.415 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:12.415 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:12.417 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 9,3% |
08:49:12.422 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 00 3c 01 00 10 0d 4b 0e 4a 43 60 07 23 |
08:49:12.437 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.437 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.477 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.477 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.492 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:12.515 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:12.515 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:12.518 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:12.518 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 0c 83 60 0d 4b c2 62 c3 60 0c 4b 0d 4a |
08:49:12.539 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.539 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.578 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.586 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.593 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:12.616 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:12.616 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:12.618 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:12.618 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 18 03 61 0d 4b 02 63 43 61 14 23 83 61 |
08:49:12.638 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.638 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.678 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.678 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.693 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:12.716 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:12.716 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:12.718 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:12.718 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 24 0b 4b c3 61 00 23 43 63 03 62 83 63 |
08:49:12.739 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.739 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.779 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.779 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.794 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:12.816 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:12.816 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:12.818 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:12.818 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 30 83 62 c3 63 03 64 ff 33 43 64 70 47 |
08:49:12.839 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.839 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.879 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.879 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.893 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:12.916 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:12.916 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:12.918 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:12.918 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 3c 2b 83 38 00 6f 07 00 00 10 27 00 00 |
08:49:12.938 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.938 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.978 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:12.978 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:12.992 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:13.015 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:13.015 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:13.018 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:13.018 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 48 20 4e 00 00 cc 07 00 00 08 52 00 00 |
08:49:13.039 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.039 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.078 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.079 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.093 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:13.116 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:13.116 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:13.119 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:13.119 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 54 dc 05 00 00 10 b5 02 48 ff f7 d2 ff |
08:49:13.140 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.140 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.180 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.180 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.194 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:13.217 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:13.217 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:13.220 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:13.220 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 60 10 bd c0 46 3c 01 00 10 10 b5 0c 4c |
08:49:13.240 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.240 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.280 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.280 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.294 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:13.318 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:13.318 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:13.320 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:13.320 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 6c 20 6f 02 f0 04 fa 00 28 0f da 00 f0 |
08:49:13.341 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.341 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.381 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.381 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.395 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:13.419 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:13.419 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:13.421 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:13.421 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 78 63 fb a3 6a 1a 00 2c 32 11 78 01 29 |
08:49:13.441 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.441 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.481 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.481 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.495 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:13.518 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:13.518 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:13.520 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:13.520 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 84 02 d0 12 78 00 2a 03 d1 db 6c 00 2b |
08:49:13.540 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.541 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.581 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.581 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.595 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:13.618 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:13.618 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:13.629 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:13.629 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 90 00 d1 30 bf 10 bd 00 f0 07 fb e6 e7 |
08:49:13.641 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.641 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.681 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.681 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.696 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:13.719 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:13.718 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:13.740 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.740 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.743 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:13.743 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 9c ec 01 00 10 30 bf 70 47 10 b5 03 f0 |
08:49:13.787 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.787 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.806 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:13.825 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:13.825 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:13.829 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:13.829 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef a8 1d fc 01 4b 18 60 10 bd 84 01 00 10 |
08:49:13.847 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.847 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.888 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.888 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.902 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:13.925 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:13.925 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:13.948 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:13.948 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:13.961 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:13.962 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef b4 70 b5 c0 24 00 25 e4 01 21 00 0e 48 |
08:49:14.006 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.006 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.021 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:14.044 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:14.044 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:14.047 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:14.047 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef c0 01 f0 08 fd 21 00 0d 48 01 f0 04 fd |
08:49:14.070 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.8->1/2/60 L_Data.ind, normal priority hop count 5, tpdu 00 80 00 |
08:49:14.087 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.087 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.127 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.127 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.141 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:14.165 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:14.165 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:14.176 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:14.176 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef cc 0c 4b 08 22 9b 68 0c 49 fc 33 5d 60 |
08:49:14.187 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.187 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.227 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.227 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.241 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:14.264 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:14.264 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:14.289 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:14.289 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef d8 0b 48 00 f0 3f fc 0b 4c 01 23 04 21 |
08:49:14.290 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.8->1/2/80 L_Data.ind, normal priority hop count 5, tpdu 00 80 c7 |
08:49:14.314 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.314 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.347 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.347 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.361 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:14.385 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:14.385 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:14.399 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:14.400 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef e4 20 00 0a 4a 02 f0 a2 fe 28 00 00 f0 |
08:49:14.410 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.410 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.446 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.446 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.460 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:14.484 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:14.484 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:14.509 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:14.509 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef f0 a9 fb 20 00 70 bd c0 46 46 82 01 00 |
08:49:14.510 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.8->2/2/70 L_Data.ind, normal priority hop count 5, tpdu 00 80 ff |
08:49:14.527 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.528 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.567 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.567 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.581 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:14.605 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:14.605 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:14.627 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.627 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.640 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:14.640 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef fc 63 82 3d 00 |
08:49:14.664 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.8->2/2/60 L_Data.ind, normal priority hop count 5, tpdu 00 80 ff |
08:49:14.691 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.691 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.705 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:14.729 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:14.729 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:14.752 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.753 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.768 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:14.788 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3600 with 256 bytes and CRC32 0x699234D1 |
08:49:14.807 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ee 00 01 00 36 00 00 d1 34 92 69 |
08:49:14.848 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.848 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.862 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:14.886 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:14.886 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:14.889 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 10,6% |
08:49:14.896 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 b8 77 00 00 d0 76 00 00 64 02 00 10 |
08:49:14.909 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.909 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.949 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:14.949 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:14.963 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:14.986 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:14.987 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:14.988 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:14.988 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c ec 01 00 10 60 20 00 00 70 47 ff ff |
08:49:15.009 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.009 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.049 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.049 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.063 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:15.087 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:15.087 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:15.090 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:15.090 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 18 f0 b5 87 b0 04 00 01 91 07 28 66 d8 |
08:49:15.110 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.111 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.150 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.150 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.164 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:15.187 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:15.187 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:15.189 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:15.189 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 24 01 27 87 40 53 4b 54 4e 9b 68 f0 6e |
08:49:15.209 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.210 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.249 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.249 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.264 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:15.287 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:15.287 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:15.289 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:15.289 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 30 3b 40 61 1c 03 93 49 10 03 68 fa 31 |
08:49:15.309 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.310 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.349 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.349 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.364 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:15.387 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:15.387 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:15.389 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:15.389 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 3c 1b 68 ff 31 98 47 f5 21 05 78 f0 6e |
08:49:15.409 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.410 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.449 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.450 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.464 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:15.487 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:15.487 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:15.490 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:15.490 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 48 49 00 03 68 1b 68 98 47 ec 21 03 78 |
08:49:15.513 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.8->1/2/10 L_Data.ind, normal priority hop count 5, tpdu 00 80 c9 |
08:49:15.530 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.530 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.570 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.570 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.584 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:15.608 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:15.608 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:15.610 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:15.611 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 54 f0 6e 3b 40 04 93 03 68 ff 31 1b 68 |
08:49:15.631 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.631 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.671 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.671 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.685 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:15.709 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:15.709 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:15.711 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:15.711 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 60 98 47 21 00 03 78 f0 6e 05 93 03 68 |
08:49:15.731 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.731 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.771 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.771 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.785 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:15.809 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:15.809 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:15.810 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:15.811 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 6c e3 31 1b 68 ff 31 98 47 21 00 03 78 |
08:49:15.831 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.831 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.871 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.871 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.885 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:15.909 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:15.908 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:15.910 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:15.910 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 78 f0 6e 02 93 03 68 db 31 1b 68 ff 31 |
08:49:15.930 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.930 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.970 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:15.970 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:15.984 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:16.008 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:16.008 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:16.030 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.031 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.038 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:16.038 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 84 98 47 01 23 01 78 1c 42 00 d1 2d 09 |
08:49:16.082 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.082 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.097 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:16.120 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:16.120 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:16.131 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:16.131 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 90 0f 22 3b 4b 15 40 ad 00 ed 58 02 9b |
08:49:16.144 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.144 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.183 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.183 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.197 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:16.221 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:16.221 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:16.234 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:16.234 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 9c 00 2b 08 d1 00 29 0f d1 00 22 37 4b |
08:49:16.245 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.245 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.283 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.283 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.307 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:16.320 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:16.320 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:16.336 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:16.336 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef a8 e4 00 e2 50 1b 19 5a 60 1f e0 04 9b |
08:49:16.345 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.345 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.382 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.382 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.397 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:16.419 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:16.419 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:16.441 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.442 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.444 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:16.444 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef b4 00 2b 1e d1 01 9b 00 2b 0f d0 00 29 |
08:49:16.488 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.489 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.503 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:16.526 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:16.526 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:16.541 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:16.541 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef c0 f0 d0 05 e0 04 9b 00 2b 2f d1 01 9b |
08:49:16.550 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.550 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.589 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.589 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.603 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:16.626 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:16.626 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:16.649 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.650 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.653 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:16.653 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef cc 00 2b e9 d0 00 23 2c 48 e4 00 00 19 |
08:49:16.697 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.697 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.711 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:16.735 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:16.735 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:16.757 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.758 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.768 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:16.768 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef d8 69 43 43 60 07 e0 02 99 28 4b 01 9a |
08:49:16.814 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.814 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.828 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:16.851 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:16.851 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:16.873 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.873 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.875 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:16.875 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef e4 69 43 e4 00 e2 50 04 34 e0 18 ff f7 |
08:49:16.920 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.921 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:16.935 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:16.958 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:16.958 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:16.963 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:16.963 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef f0 af fc 07 b0 f0 bd 00 29 17 d1 03 9b |
08:49:16.982 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:16.982 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.021 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.021 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.036 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:17.059 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:17.059 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:17.071 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:17.072 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef fc 00 2b 37 d1 |
08:49:17.082 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.082 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.111 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.111 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.126 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:17.149 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:17.149 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:17.172 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.172 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.190 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:17.228 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3700 with 256 bytes and CRC32 0x11AD6E76 |
08:49:17.229 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ee 00 01 00 37 00 00 76 6e ad 11 |
08:49:17.270 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.270 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.284 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:17.308 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:17.308 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:17.310 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 12,0% |
08:49:17.312 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 00 01 9b 00 2b f5 d0 1c 4b 9a 69 3a 42 |
08:49:17.330 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.330 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.370 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.370 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.384 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:17.408 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:17.408 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:17.410 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:17.410 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 0c 02 d1 9a 68 3a 43 9a 60 03 23 01 22 |
08:49:17.430 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.430 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.470 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.470 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.484 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:17.507 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:17.508 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:17.509 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:17.512 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 18 21 00 30 6f 02 f0 ff f8 02 99 19 4b |
08:49:17.530 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.530 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.570 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.570 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.584 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:17.607 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:17.607 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:17.609 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:17.609 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 24 69 43 e0 00 20 e0 03 9b 00 2b 17 d0 |
08:49:17.629 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.629 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.669 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.669 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.683 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:17.707 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:17.706 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:17.708 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:17.708 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 30 01 9b 00 2b f4 d1 05 9b 1f 42 da d1 |
08:49:17.729 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.729 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.768 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.768 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.783 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:17.806 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:17.806 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:17.808 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:17.808 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 3c 0e 4b 9a 69 3a 42 02 d1 9a 68 ba 43 |
08:49:17.830 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.830 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.870 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.870 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.884 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:17.907 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:17.907 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:17.909 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:17.909 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 48 9a 60 03 23 00 22 21 00 30 6f 02 f0 |
08:49:17.929 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.929 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.969 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:17.969 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:17.983 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:18.007 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:18.007 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:18.009 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:18.009 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 54 e4 f8 0b 4b e4 00 00 22 1b 19 a6 e7 |
08:49:18.029 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.029 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.070 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.070 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.083 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:18.106 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:18.106 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:18.108 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:18.108 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 60 01 9b 00 2b c5 d0 69 43 06 4b e0 00 |
08:49:18.128 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.128 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.168 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.168 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.182 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:18.206 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:18.206 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:18.209 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:18.209 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 6c c0 18 be e7 01 9b 00 2b bd d1 de e7 |
08:49:18.229 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.229 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.269 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.269 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.283 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:18.306 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:18.306 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:18.311 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:18.317 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 78 64 02 00 10 ec 01 00 10 f0 76 00 00 |
08:49:18.330 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.331 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.369 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.369 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.383 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:18.410 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:18.410 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:18.417 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:18.418 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 84 ac 01 00 10 b0 01 00 10 ff 23 f7 b5 |
08:49:18.432 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.433 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.473 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.473 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.487 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:18.510 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:18.510 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:18.516 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:18.516 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 90 03 70 01 3b ff 3b 43 60 83 60 83 73 |
08:49:18.534 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.534 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.574 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.574 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.588 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:18.611 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:18.611 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:18.620 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:18.620 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 9c 00 23 3c 4a 04 00 0e 00 82 81 03 61 |
08:49:18.634 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.634 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.674 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.674 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.689 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:18.712 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:18.712 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:18.725 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:18.726 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef a8 0b 29 2a d8 39 4f 08 39 f8 6e 03 68 |
08:49:18.737 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.737 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.775 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.775 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.789 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:18.812 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:18.812 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:18.821 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:18.821 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef b4 1b 68 03 29 0d d8 49 08 d9 31 ff 31 |
08:49:18.835 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.835 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.875 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.875 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.889 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:18.913 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:18.913 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:18.918 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:18.918 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef c0 98 47 01 22 03 78 32 40 92 00 13 41 |
08:49:18.935 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.935 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.975 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:18.975 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:18.989 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:19.012 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:19.012 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:19.015 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:19.015 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef cc 0f 22 13 40 5e 1e 08 2e 15 d8 00 25 |
08:49:19.035 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.035 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.074 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.074 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.088 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:19.112 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:19.112 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:19.133 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:19.134 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef d8 f8 6e 69 08 03 68 d9 31 1b 68 ff 31 |
08:49:19.135 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.135 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.179 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.179 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.193 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:19.216 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:19.216 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:19.219 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:19.219 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef e4 98 47 01 22 03 78 2a 40 92 00 13 41 |
08:49:19.254 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.254 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.280 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.280 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.294 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:19.317 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:19.317 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:19.324 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:19.324 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef f0 01 92 0f 22 13 40 01 3b 9e 42 04 d0 |
08:49:19.340 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.340 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.379 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.380 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.394 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:19.417 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:19.417 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:19.441 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:19.442 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef fc 01 35 04 2d |
08:49:19.447 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.447 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.474 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.474 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.489 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:19.512 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:19.512 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:19.514 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:19.534 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.534 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.544 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3800 with 256 bytes and CRC32 0xF20D596B |
08:49:19.575 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ee 00 01 00 38 00 00 6b 59 0d f2 |
08:49:19.616 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.616 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.629 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:19.658 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:19.658 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:19.661 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 13,3% |
08:49:19.671 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 00 ea d1 20 00 fe bd ee 21 f8 6e a6 60 |
08:49:19.683 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.683 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.721 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.722 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.736 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:19.759 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:19.759 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:19.761 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:19.761 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 0c 03 68 65 60 1b 68 ff 31 98 47 03 78 |
08:49:19.781 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.782 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.821 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.821 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.836 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:19.859 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:19.859 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:19.861 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:19.861 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 18 6e 00 33 41 03 22 1a 40 00 92 22 70 |
08:49:19.881 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.881 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.921 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.921 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:19.936 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:19.959 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:19.959 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:19.961 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:19.961 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 24 27 d0 01 2a eb d1 f8 6e 6e 10 03 68 |
08:49:19.981 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:19.981 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.021 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.021 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.041 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:20.058 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:20.059 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:20.063 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:20.063 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 30 f0 36 ff 36 31 00 1b 68 98 47 01 9a |
08:49:20.083 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.083 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.122 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.123 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.144 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:20.160 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:20.160 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:20.162 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:20.162 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 3c 03 78 f8 6e 13 41 03 22 13 40 63 73 |
08:49:20.182 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.183 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.222 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.223 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.236 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:20.260 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:20.260 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:20.261 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:20.262 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 48 03 68 31 00 1b 68 98 47 01 99 03 78 |
08:49:20.281 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.281 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.322 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.322 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.336 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:20.359 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:20.359 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:20.361 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:20.362 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 54 8a 1c 13 41 03 22 f2 21 f8 6e 13 40 |
08:49:20.383 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.384 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.422 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.422 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.436 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:20.460 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:20.460 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:20.463 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:20.463 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 60 a3 73 03 68 ff 31 1b 68 98 47 03 78 |
08:49:20.483 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.483 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.523 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.523 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.537 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:20.560 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:20.560 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:20.562 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:20.562 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 6c 00 9a 2b 41 13 40 23 61 c5 e7 f7 21 |
08:49:20.582 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.582 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.622 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.622 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.636 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:20.660 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:20.660 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:20.662 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:20.663 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 78 f8 6e 49 00 03 68 1b 68 98 47 03 78 |
08:49:20.683 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.683 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.723 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.723 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.742 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:20.760 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:20.760 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:20.780 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:20.780 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 84 03 22 33 41 13 40 23 73 b9 e7 c0 46 |
08:49:20.786 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.786 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.824 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.824 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.839 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:20.862 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:20.862 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:20.887 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.887 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.891 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:20.891 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 90 00 ff ff ff ec 01 00 10 f0 b5 00 25 |
08:49:20.935 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.936 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:20.949 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:20.973 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:20.973 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:20.975 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:20.976 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 9c 89 b0 03 af 01 90 0c 00 01 00 38 00 |
08:49:20.996 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:20.996 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.036 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.036 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.050 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:21.074 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:21.074 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:21.095 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.095 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.099 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:21.100 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef a8 ff f7 70 ff 7b 68 7d 57 be 68 00 93 |
08:49:21.146 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.146 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.159 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:21.182 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:21.182 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:21.190 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:21.190 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef b4 01 2d 5b d0 02 2d 00 d1 93 e0 00 2d |
08:49:21.204 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.204 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.244 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.244 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.258 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:21.282 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:21.282 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:21.304 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.304 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.332 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:21.332 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef c0 30 d1 01 9b 60 4a 08 3b 01 92 03 2b |
08:49:21.376 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.377 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.391 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:21.414 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:21.414 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:21.437 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.437 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.452 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:21.453 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef cc 04 d8 31 00 10 6f 02 f0 0b f8 04 00 |
08:49:21.497 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.498 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.512 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:21.535 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:21.535 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:21.540 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:21.540 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef d8 01 9b 00 99 18 6f 08 31 02 f0 04 f8 |
08:49:21.558 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.558 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.598 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.598 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.612 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:21.635 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:21.635 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:21.639 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:21.640 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef e4 3b 7b f2 00 05 00 58 4f 00 92 02 2b |
08:49:21.658 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.659 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.698 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.698 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.712 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:21.736 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:21.736 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:21.752 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:21.752 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef f0 1a d0 03 2b 1a d0 01 2b 00 d1 04 43 |
08:49:21.761 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.761 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.798 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.798 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.811 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:21.835 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:21.835 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:21.846 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:21.846 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef fc 00 2c 23 d0 |
08:49:21.858 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.858 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.885 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.885 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.900 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:21.923 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:21.923 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:21.932 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:21.947 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:21.947 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:21.985 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3900 with 256 bytes and CRC32 0xD2F36BCF |
08:49:21.990 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ee 00 01 00 39 00 00 cf 6b f3 d2 |
08:49:22.030 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.030 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.044 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:22.068 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:22.068 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:22.070 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 14,6% |
08:49:22.071 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 00 f3 00 ff 18 38 00 ff f7 b1 fb 00 28 |
08:49:22.090 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.090 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.129 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.140 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.144 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:22.167 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:22.167 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:22.169 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:22.169 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 0c 0a d0 00 23 7b 60 01 33 b3 40 4e 4a |
08:49:22.189 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.189 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.229 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.229 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.243 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:22.267 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:22.268 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:22.277 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:22.277 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 18 91 69 19 42 02 d1 91 68 0b 43 93 60 |
08:49:22.290 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.290 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.329 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.330 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.344 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:22.367 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:22.367 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:22.369 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:22.369 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 24 09 b0 f0 bd 04 40 e7 e7 04 40 00 28 |
08:49:22.390 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.390 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.430 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.430 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.444 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:22.468 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:22.468 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:22.469 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:22.469 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 30 e4 d1 03 00 02 00 01 98 31 00 00 6f |
08:49:22.490 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.490 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.530 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.530 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.544 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:22.567 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:22.567 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:22.570 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:22.570 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 3c 01 f0 ef ff f3 00 fd 50 fb 18 5d 60 |
08:49:22.589 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.590 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.630 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.630 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.644 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:22.667 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:22.667 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:22.670 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:22.670 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 48 f3 00 18 1d 38 18 ff f7 8d fb 00 28 |
08:49:22.690 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.690 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.730 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.730 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.744 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:22.768 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:22.768 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:22.770 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:22.770 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 54 e6 d0 00 23 f2 00 bb 50 01 33 b3 40 |
08:49:22.792 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.792 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.832 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.832 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.846 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:22.870 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:22.870 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:22.873 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:22.873 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 60 3b 4a 91 69 19 42 dd d1 91 68 99 43 |
08:49:22.893 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.893 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.933 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.933 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:22.947 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:22.970 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:22.970 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:22.973 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:22.974 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 6c 91 60 d9 e7 35 4b 00 99 18 6f 08 31 |
08:49:22.994 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:22.994 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.034 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.034 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.048 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:23.071 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:23.071 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:23.074 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:23.074 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 78 01 f0 b8 ff 2a 00 3b 69 b2 40 58 40 |
08:49:23.094 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.094 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.134 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.135 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.148 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:23.172 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:23.173 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:23.198 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.199 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.222 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:23.222 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 84 32 4b 28 42 18 d0 0d 21 79 56 01 29 |
08:49:23.266 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.267 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.281 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:23.304 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:23.304 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:23.328 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.328 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.334 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:23.334 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 90 06 d1 99 69 11 42 22 d0 99 69 0a 43 |
08:49:23.379 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.379 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.393 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:23.417 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:23.417 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:23.425 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:23.425 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 9c 9a 61 c1 e7 02 29 f9 d1 99 69 11 42 |
08:49:23.440 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.440 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.480 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.480 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.495 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:23.518 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:23.518 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:23.534 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:23.534 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef a8 f6 d1 99 68 11 43 18 e0 0a 42 b7 d1 |
08:49:23.542 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.542 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.580 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.580 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.594 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:23.618 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:23.618 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:23.638 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:23.638 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef b4 9a 68 22 40 9a 60 b3 e7 0e 20 99 69 |
08:49:23.643 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.643 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.683 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.683 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.696 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:23.720 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:23.720 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:23.744 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.744 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.760 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:23.760 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef c0 38 56 0a 42 ae d0 91 43 d4 43 99 61 |
08:49:23.805 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.805 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.819 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:23.842 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:23.842 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:23.861 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:23.862 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef cc 01 28 ef d0 02 28 a7 d1 11 42 a5 d1 |
08:49:23.868 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.868 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.907 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.907 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.921 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:23.946 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:23.947 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:23.969 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:23.969 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:23.980 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:23.980 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef d8 99 68 0a 43 ec e7 99 68 91 43 99 60 |
08:49:24.024 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.025 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.039 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:24.062 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:24.062 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:24.084 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.084 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.104 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:24.107 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef e4 d8 e7 00 99 17 4c 08 31 20 6f 01 f0 |
08:49:24.151 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.151 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.165 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:24.188 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:24.189 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:24.210 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.210 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.226 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:24.226 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef f0 7d ff 28 42 12 d0 01 24 21 00 b1 40 |
08:49:24.237 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->0/1/0 L_Data.ind, low priority hop count 6, tpdu 00 80 |
08:49:24.273 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.273 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.288 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:24.311 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:24.311 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:24.325 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:24.326 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef fc 14 4b 9a 69 |
08:49:24.335 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.335 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.365 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.365 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.376 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:24.399 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:24.400 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:24.414 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:24.425 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.425 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.454 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3A00 with 256 bytes and CRC32 0x4A1D27BC |
08:49:24.464 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ee 00 01 00 3a 00 00 bc 27 1d 4a |
08:49:24.504 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.504 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.519 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:24.542 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:24.542 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:24.544 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 15,9% |
08:49:24.544 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 00 0a 40 20 42 04 d0 00 2a 00 d0 8b e7 |
08:49:24.564 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.564 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.604 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.604 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.620 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:24.642 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:24.642 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:24.645 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:24.645 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 0c 9a 68 e4 e7 00 2a 00 d0 86 e7 9a 68 |
08:49:24.664 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.664 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.704 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.704 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.718 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:24.741 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:24.741 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:24.743 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:24.745 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 18 8a 43 cd e7 01 9b 0a 2b 00 dc 7f e7 |
08:49:24.763 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.763 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.803 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.803 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.818 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:24.841 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:24.841 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:24.843 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:24.843 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 24 31 00 20 6f 01 f0 60 ff 01 22 08 4b |
08:49:24.864 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.864 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.904 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.904 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:24.918 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:24.942 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:24.942 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:24.944 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:24.944 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 30 b2 40 99 69 00 28 cd d1 11 42 00 d0 |
08:49:24.964 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:24.964 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.005 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.005 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.018 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:25.041 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:25.041 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:25.043 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:25.043 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 3c 72 e7 99 68 91 43 99 60 6e e7 c0 46 |
08:49:25.063 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.063 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.103 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.103 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.117 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:25.141 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:25.141 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:25.142 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:25.143 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 48 ec 01 00 10 ac 01 00 10 64 02 00 10 |
08:49:25.166 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.166 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.203 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.203 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.217 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:25.240 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:25.240 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:25.242 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:25.242 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 54 fa 20 f8 b5 40 00 02 f0 3d fb 01 f0 |
08:49:25.263 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.263 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.302 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.302 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.316 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:25.340 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:25.339 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:25.341 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:25.342 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 60 b9 ff c0 21 16 48 89 01 01 f0 b4 fa |
08:49:25.362 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.362 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.402 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.402 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.416 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:25.439 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:25.439 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:25.441 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:25.441 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 6c 0a 24 05 20 01 f0 d4 ff 01 3c 05 00 |
08:49:25.461 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.461 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.501 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.501 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.515 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:25.538 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:25.538 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:25.561 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.561 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.579 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:25.579 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 78 0a 20 02 f0 2d fb 00 2c f5 d1 80 21 |
08:49:25.589 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 07 bc |
08:49:25.627 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.627 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.641 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:25.665 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:25.665 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:25.673 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:25.673 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 84 0e 48 49 01 01 f0 a4 fa fa 27 28 00 |
08:49:25.690 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.690 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.726 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.727 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.741 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:25.764 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:25.764 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:25.780 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:25.780 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 90 14 21 03 f0 bd fa 7f 00 79 43 0e 00 |
08:49:25.789 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.789 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.826 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.826 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.840 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:25.863 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:25.863 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:25.876 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:25.876 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 9c 09 4b dd 68 b4 42 02 d3 00 23 2b 62 |
08:49:25.888 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.888 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.927 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:25.927 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:25.941 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:25.965 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:25.965 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:25.981 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:25.982 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef a8 f8 bd 38 00 02 f0 14 fb 2b 6a f5 34 |
08:49:25.995 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 15 19 |
08:49:26.013 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.014 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.053 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.053 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.067 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:26.091 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:26.091 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:26.095 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:26.095 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef b4 5a 42 53 41 db 00 2b 62 ff 34 ef e7 |
08:49:26.115 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.115 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.155 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.155 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.169 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:26.192 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:26.192 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:26.216 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.216 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.221 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:26.221 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef c0 24 83 30 00 b8 77 00 00 10 b5 04 00 |
08:49:26.267 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.267 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.281 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:26.304 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:26.304 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:26.306 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:26.306 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef cc 78 21 03 f0 e3 fb 20 00 10 bd ff ff |
08:49:26.327 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.327 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.366 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.367 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.381 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:26.404 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:26.404 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:26.425 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:26.425 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.425 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.425 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef d8 13 b5 0e 4c 20 00 01 f0 f1 fd 0d 4a |
08:49:26.472 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.472 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.486 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:26.509 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:26.509 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:26.524 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:26.525 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef e4 0d 49 20 00 03 f0 b8 fb 08 22 00 21 |
08:49:26.536 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.537 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.571 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.571 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.585 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:26.609 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:26.609 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:26.623 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:26.623 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef f0 0b 4b 01 3a 19 60 59 60 08 33 00 2a |
08:49:26.635 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.635 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.673 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.676 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.687 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:26.710 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:26.711 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:26.741 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.741 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.756 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:26.756 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef fc f9 d1 fa 23 |
08:49:26.789 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.790 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.805 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:26.828 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:26.828 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:26.831 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:26.849 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.849 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.878 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3B00 with 256 bytes and CRC32 0x249A34F5 |
08:49:26.894 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ee 00 01 00 3b 00 00 f5 34 9a 24 |
08:49:26.934 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.934 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:26.948 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:26.972 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:26.972 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:26.974 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 17,3% |
08:49:26.974 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 00 5b 00 00 93 07 49 08 4b 08 32 08 48 |
08:49:26.995 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:26.995 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.034 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.034 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.048 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:27.071 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:27.071 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:27.073 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:27.073 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 0c ff f7 be fa 13 bd c0 46 ec 01 00 10 |
08:49:27.094 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.094 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.134 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.134 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.148 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:27.174 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:27.174 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:27.176 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:27.176 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 18 e0 00 00 10 15 37 00 00 ac 01 00 10 |
08:49:27.197 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.197 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.237 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.237 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.252 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:27.274 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:27.274 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:27.276 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:27.276 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 24 50 77 00 00 43 82 6d 00 88 01 00 10 |
08:49:27.296 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.296 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.336 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.336 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.351 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:27.374 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:27.374 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:27.376 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:27.376 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 30 f7 b5 01 24 22 00 1a 4d 01 90 6b 68 |
08:49:27.396 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.396 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.436 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.436 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.451 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:27.473 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:27.474 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:27.476 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:27.476 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 3c af 68 9a 40 eb 68 01 3a 13 40 9f 42 |
08:49:27.496 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.496 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.536 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.536 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.550 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:27.573 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:27.574 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:27.577 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:27.577 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 48 21 d0 f4 21 5f 40 15 4b ff 31 d8 6e |
08:49:27.597 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.597 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.637 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.637 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.651 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:27.674 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:27.674 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:27.676 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:27.676 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 54 00 26 03 68 1b 68 98 47 03 78 00 93 |
08:49:27.696 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.696 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.736 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.736 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.750 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:27.773 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:27.773 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:27.775 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:27.775 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 60 3c 42 10 d0 01 23 b3 40 aa 68 1a 40 |
08:49:27.799 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.800 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.837 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.837 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.851 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:27.874 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:27.874 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:27.876 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:27.876 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 6c 00 9b 1c 42 12 d1 53 1e 9a 41 31 00 |
08:49:27.897 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.897 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.936 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:27.936 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:27.950 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:27.977 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:27.977 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:27.999 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.000 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.007 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:28.007 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 78 0a 48 03 23 00 6f d2 b2 0c 31 01 f0 |
08:49:28.051 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.051 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.065 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:28.089 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:28.089 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:28.115 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.115 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.125 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:28.125 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 84 cc fe 01 36 64 00 08 2e e8 d1 28 00 |
08:49:28.170 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.170 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.184 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:28.207 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:28.207 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:28.219 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:28.219 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 90 01 99 00 f0 87 f9 f7 bd 53 42 5a 41 |
08:49:28.231 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.231 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.269 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.269 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.283 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:28.306 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:28.306 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:28.309 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:28.309 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 9c eb e7 c0 46 64 02 00 10 ec 01 00 10 |
08:49:28.328 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.328 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.368 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.368 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.382 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:28.406 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:28.406 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:28.428 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.428 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.446 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:28.446 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef a8 f8 b5 22 4f 01 00 04 00 38 6f 01 f0 |
08:49:28.491 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.491 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.505 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:28.528 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:28.528 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:28.530 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:28.530 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef b4 9b fe 20 4d 06 00 07 2c 23 dc 01 00 |
08:49:28.550 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.550 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.590 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.590 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.604 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:28.627 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:28.627 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:28.635 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:28.635 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef c0 20 00 ff f7 29 fd 1d 4b e2 00 d1 58 |
08:49:28.649 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.649 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.689 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.689 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.703 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:28.726 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:28.726 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:28.749 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.749 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.763 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:28.763 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef cc 00 29 1a d1 9b 18 5b 68 00 2b 16 d1 |
08:49:28.809 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.809 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.823 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:28.846 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:28.846 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:28.850 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:28.850 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef d8 01 33 a3 40 aa 69 1a 40 00 2e 21 d0 |
08:49:28.868 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.868 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.908 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.908 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.923 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:28.945 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:28.945 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:28.967 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:28.967 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:28.974 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:28.974 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef e4 00 2a 02 d1 aa 68 13 43 ab 60 21 00 |
08:49:29.018 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.018 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.032 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:29.056 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:29.056 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:29.069 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:29.069 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef f0 38 6f 01 f0 7b fe b0 42 05 d0 03 23 |
08:49:29.079 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.079 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.118 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.119 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.132 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:29.155 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:29.155 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:29.171 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:29.171 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef fc 32 00 21 00 |
08:49:29.181 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.181 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.206 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.207 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.221 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:29.245 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:29.245 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:29.271 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.271 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.291 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:29.318 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3C00 with 256 bytes and CRC32 0x59C0B229 |
08:49:29.318 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ee 00 01 00 3c 00 00 29 b2 c0 59 |
08:49:29.358 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.358 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.374 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:29.396 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:29.396 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:29.399 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 18,6% |
08:49:29.400 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 00 38 6f 01 f0 8c fe 31 00 20 00 ff f7 |
08:49:29.422 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.423 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.461 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.461 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.474 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:29.497 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:29.497 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:29.499 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:29.499 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 0c 45 fe 01 23 6a 68 93 40 ea 68 01 3b |
08:49:29.520 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.520 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.563 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.564 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.574 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:29.597 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:29.597 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:29.599 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:29.599 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 18 13 40 aa 68 9a 42 02 d0 64 20 ff f7 |
08:49:29.619 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.619 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.659 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.659 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.673 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:29.697 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:29.697 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:29.699 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:29.699 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 24 85 ff f8 bd 00 2a e0 d1 aa 68 9a 43 |
08:49:29.719 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.719 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.759 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.760 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.773 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:29.796 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:29.796 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:29.798 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:29.798 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 aa 60 dc e7 ec 01 00 10 64 02 00 10 |
08:49:29.818 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.818 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.858 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.858 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.872 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:29.896 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:29.896 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:29.898 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:29.898 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 3c ac 01 00 10 f7 b5 6b 46 9d 1c 2a 00 |
08:49:29.918 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.918 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.958 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:29.958 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:29.972 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:29.995 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:29.995 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:29.997 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:29.997 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 48 38 48 01 a9 ff f7 86 fb 37 4c 00 28 |
08:49:30.017 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.018 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.057 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.057 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.071 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:30.095 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:30.095 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:30.097 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:30.097 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 54 1a d0 80 23 00 21 6a 5e 5b 00 9a 42 |
08:49:30.118 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.118 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.158 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.158 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.172 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:30.195 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:30.195 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:30.197 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:30.197 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 60 14 d1 00 22 01 98 c3 00 1a 51 e3 18 |
08:49:30.217 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.217 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.257 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.257 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.272 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:30.295 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:30.295 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:30.297 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:30.297 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 6c 5a 60 01 23 83 40 30 4a 91 69 0b 42 |
08:49:30.317 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.317 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.357 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.357 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.371 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:30.394 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:30.394 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:30.423 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.423 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.450 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:30.450 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 78 01 d0 99 43 91 61 90 69 91 68 18 40 |
08:49:30.495 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.495 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.509 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:30.532 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:30.532 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:30.535 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:30.535 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 84 19 42 44 d0 00 28 47 d0 2a 48 ff f7 |
08:49:30.557 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.557 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.597 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.597 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.611 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:30.634 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:30.634 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:30.653 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:30.653 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 90 ed f9 00 28 03 d0 16 22 28 4b 1b 68 |
08:49:30.660 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.660 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.699 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.699 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.713 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:30.736 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:30.736 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:30.743 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:30.743 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 9c 1a 62 00 25 20 1d ff f7 e3 f9 07 00 |
08:49:30.759 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.759 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.799 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.799 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.813 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:30.836 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:30.836 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:30.849 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:30.849 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef a8 20 00 ff f7 df f9 06 00 00 2f 01 d1 |
08:49:30.859 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.860 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.898 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.898 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:30.913 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:30.937 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:30.937 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:30.956 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:30.956 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef b4 00 28 1a d0 01 21 a9 40 1d 4b 9a 69 |
08:49:30.964 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:30.964 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.002 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.002 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.016 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:31.040 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:31.040 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:31.051 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:31.051 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef c0 0a 40 00 2e 2d d0 00 2a 02 d1 9a 68 |
08:49:31.064 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.064 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.104 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.104 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.118 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:31.141 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:31.141 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:31.163 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:31.163 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef cc 0a 43 9a 60 1b 48 03 23 32 00 29 00 |
08:49:31.166 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.166 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.213 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.213 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.224 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:31.247 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:31.247 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:31.268 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:31.268 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef d8 00 6f 01 f0 20 fe 31 00 28 00 ff f7 |
08:49:31.269 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.269 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.313 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.313 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.327 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:31.350 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:31.351 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:31.353 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:31.353 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef e4 99 fc 31 00 28 00 ff f7 d5 fd 01 35 |
08:49:31.374 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.374 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.414 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.414 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.428 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:31.451 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:31.451 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:31.468 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:31.468 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef f0 08 34 08 2d d4 d1 01 23 0e 49 4a 68 |
08:49:31.478 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.479 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.515 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.515 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.529 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:31.553 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:31.553 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:31.575 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.575 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.582 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:31.582 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef fc 93 40 ca 68 |
08:49:31.615 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.615 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.630 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:31.653 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:31.653 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:31.674 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.674 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.702 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:31.715 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3D00 with 256 bytes and CRC32 0x5B2733C5 |
08:49:31.717 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ee 00 01 00 3d 00 00 c5 33 27 5b |
08:49:31.756 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.757 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.771 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:31.794 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:31.794 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:31.797 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 19,9% |
08:49:31.797 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 00 01 3b 13 40 8a 68 9a 42 02 d0 64 20 |
08:49:31.818 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.818 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.857 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.858 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.872 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:31.895 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:31.895 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:31.898 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:31.898 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 0c ff f7 10 ff f7 bd 00 28 ba d1 0b 43 |
08:49:31.918 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.918 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.965 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:31.965 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:31.973 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:31.996 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:31.996 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:31.998 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:31.998 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 18 93 60 b7 e7 99 43 91 60 b4 e7 00 2a |
08:49:32.017 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.018 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.057 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.058 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.072 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:32.095 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:32.095 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:32.097 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:32.097 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 24 d4 d1 9a 68 8a 43 d0 e7 88 01 00 10 |
08:49:32.117 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.117 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.157 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.157 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.178 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:32.194 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:32.194 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:32.196 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:32.196 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 30 ac 01 00 10 64 02 00 10 80 02 00 10 |
08:49:32.217 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.217 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.257 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.257 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.271 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:32.294 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:32.294 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:32.296 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:32.296 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 3c b8 02 00 10 ec 01 00 10 f7 b5 38 4f |
08:49:32.316 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.316 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.356 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.356 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.370 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:32.394 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:32.394 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:32.395 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:32.395 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 48 08 22 38 00 37 49 00 f0 85 f8 ff f7 |
08:49:32.416 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.416 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.456 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.456 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.470 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:32.493 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:32.493 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:32.495 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:32.495 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 54 7f fe f8 21 35 4d ff 31 e8 6e 00 26 |
08:49:32.515 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.515 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.555 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.555 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.569 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:32.593 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:32.593 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:32.595 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:32.596 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 60 03 68 1b 68 98 47 fb 21 04 78 e8 6e |
08:49:32.619 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.36->6/1/14 L_Data.ind, low priority hop count 6, tpdu 00 80 07 30 |
08:49:32.638 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.638 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.677 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.678 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.692 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:32.715 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:32.715 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:32.717 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:32.717 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 6c 49 00 03 68 24 02 1b 68 98 47 03 21 |
08:49:32.737 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.737 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.778 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.778 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.791 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:32.815 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:32.815 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:32.833 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:32.833 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 78 02 78 6b 46 22 43 8c 46 34 00 10 00 |
08:49:32.840 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.840 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.878 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.878 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.893 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:32.916 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:32.916 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:32.938 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:32.938 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:32.973 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:32.973 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 84 61 00 c8 40 01 00 60 46 01 40 02 29 |
08:49:33.017 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.018 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.032 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:33.055 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:33.055 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:33.078 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.078 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.088 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:33.088 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 90 47 d1 01 39 19 70 a1 40 0e 43 01 34 |
08:49:33.132 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.132 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.146 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:33.170 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:33.170 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:33.184 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:33.184 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 9c 01 33 08 2c ef d1 00 23 21 00 1a 00 |
08:49:33.194 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.194 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.232 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.232 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.246 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:33.269 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:33.269 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:33.282 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:33.282 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef a8 28 6f 01 34 01 f0 b7 fd 0c 2c f6 d1 |
08:49:33.295 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.295 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.331 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.331 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.345 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:33.368 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:33.368 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:33.392 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.392 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.403 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:33.404 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef b4 00 24 6b 46 1a 5d 21 00 01 3a 53 42 |
08:49:33.449 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.450 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.467 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:33.487 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:33.487 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:33.507 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:33.507 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef c0 5a 41 28 6f 00 23 01 34 01 f0 a9 fd |
08:49:33.515 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.515 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.552 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.552 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.565 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:33.589 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:33.589 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:33.599 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:33.599 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef cc 08 2c f2 d1 00 24 21 00 28 6f 01 f0 |
08:49:33.612 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.612 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.651 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.651 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.665 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:33.689 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:33.689 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:33.702 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:33.702 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef d8 89 fd 01 00 20 00 01 34 ff f7 5a fd |
08:49:33.712 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.713 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.751 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.751 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.765 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:33.788 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:33.793 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:33.814 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.814 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.828 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:33.828 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef e4 08 2c f4 d1 f9 21 e8 6e 49 00 03 68 |
08:49:33.872 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.872 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.893 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:33.910 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:33.910 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:33.934 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:33.934 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:33.956 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:33.956 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef f0 1b 68 98 47 23 00 02 78 31 00 38 00 |
08:49:34.001 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.001 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.014 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:34.041 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:34.041 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:34.064 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.064 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.083 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:34.083 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef fc 00 f0 f4 f8 |
08:49:34.116 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.116 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.131 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:34.154 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:34.154 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:34.156 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:34.159 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3E00 with 256 bytes and CRC32 0x9B36827B |
08:49:34.160 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ee 00 01 00 3e 00 00 7b 82 36 9b |
08:49:34.176 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.176 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.212 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.212 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.226 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:34.249 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:34.250 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:34.252 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 21,2% |
08:49:34.253 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 00 0c 4c 0a 21 20 00 ff f7 e7 fa 20 00 |
08:49:34.272 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.273 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.312 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.313 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.327 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:34.350 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:34.350 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:34.352 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:34.352 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 0c 0a 21 ff f7 e5 fa 38 00 21 00 00 f0 |
08:49:34.372 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.372 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.412 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.412 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.426 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:34.449 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:34.449 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:34.452 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:34.452 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 18 33 f9 00 20 ff f7 88 fe f7 bd 00 21 |
08:49:34.472 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.472 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.513 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.513 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.526 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:34.550 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:34.550 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:34.552 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:34.552 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 24 19 70 b8 e7 64 02 00 10 30 77 00 00 |
08:49:34.572 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.572 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.612 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.612 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.626 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:34.650 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:34.650 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:34.651 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:34.652 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 30 ec 01 00 10 88 01 00 10 c2 69 00 2a |
08:49:34.672 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.672 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.712 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.712 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.726 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:34.749 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:34.749 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:34.753 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:34.753 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 3c 09 d0 05 4b 1b 68 9b 1a 05 d4 00 23 |
08:49:34.773 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.773 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.813 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.813 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.827 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:34.850 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:34.851 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:34.853 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:34.853 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 48 16 22 c3 61 02 4b 1b 68 1a 62 70 47 |
08:49:34.873 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.873 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.913 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.913 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:34.927 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:34.950 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:34.950 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:34.952 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:34.952 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 54 a0 02 00 10 b8 02 00 10 f8 b5 05 00 |
08:49:34.972 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:34.972 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.012 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.012 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.027 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:35.049 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:35.049 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:35.051 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:35.051 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 60 00 26 1f 27 41 63 02 63 2b 6b 9e 42 |
08:49:35.071 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.071 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.111 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.111 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.125 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:35.149 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:35.149 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:35.155 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:35.155 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 6c 00 d3 f8 bd c0 21 0a 4a b3 00 d4 58 |
08:49:35.171 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.171 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.211 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.211 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.225 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:35.248 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:35.248 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:35.259 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:35.259 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 78 c9 01 20 00 01 f0 aa f8 22 00 64 06 |
08:49:35.272 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.272 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.312 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.312 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.326 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:35.360 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:35.360 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:35.382 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:35.382 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 84 06 4b a4 0f a4 00 e1 58 04 23 3a 40 |
08:49:35.386 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.387 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.426 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.426 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.440 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:35.463 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:35.464 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:35.486 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.487 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.519 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:35.520 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 90 93 40 00 22 01 36 5a 50 e6 e7 c0 46 |
08:49:35.571 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.571 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.578 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:35.601 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:35.602 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:35.625 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.625 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.637 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:35.637 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 9c 88 77 00 00 b8 77 00 00 f8 b5 04 00 |
08:49:35.683 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.683 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.697 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:35.720 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:35.720 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:35.743 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:35.743 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef a8 0e 00 00 25 01 27 63 68 ab 42 00 d8 |
08:49:35.743 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.743 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.787 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.787 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.801 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:35.837 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:35.837 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:35.860 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.860 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:35.953 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:35.954 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef b4 f8 bd 23 68 29 00 20 00 9b 68 98 47 |
08:49:35.998 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:35.999 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.013 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:36.036 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:36.036 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:36.058 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.058 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.153 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:36.153 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef c0 00 28 15 d0 3a 00 63 68 9a 40 e3 68 |
08:49:36.197 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.197 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.211 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:36.235 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:36.235 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:36.247 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:36.247 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef cc 01 3a 13 40 a2 68 9a 42 0c d0 14 2e |
08:49:36.259 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.259 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.298 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.298 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.313 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:36.335 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:36.336 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:36.346 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:36.346 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef d8 0a d9 14 20 02 f0 fc f8 23 68 20 00 |
08:49:36.357 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.357 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.397 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.397 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.411 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:36.445 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:36.445 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:36.467 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.467 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.470 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:36.470 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef e4 5b 68 98 47 30 00 14 38 02 f0 f4 f8 |
08:49:36.515 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.515 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.532 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:36.553 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:36.553 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:36.568 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:36.568 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef f0 01 35 dc e7 f8 b5 01 27 3d 00 8d 40 |
08:49:36.579 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.579 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.616 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.616 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.631 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:36.656 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:36.657 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:36.678 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:36.678 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef fc 03 69 04 00 |
08:49:36.678 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.678 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.712 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.712 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.727 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:36.750 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:36.750 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:36.767 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:36.767 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x3F00 with 256 bytes and CRC32 0x65989BD8 |
08:49:36.767 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ee 00 01 00 3f 00 00 d8 9b 98 65 |
08:49:36.776 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.776 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.826 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.827 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.844 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:36.847 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:36.847 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:36.850 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 22,6% |
08:49:36.850 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 00 80 68 e2 68 58 40 28 40 c8 40 53 40 |
08:49:36.870 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.870 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.910 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.910 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.924 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:36.947 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:36.948 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:36.973 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:36.973 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:36.978 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:36.979 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 0c 2b 40 cb 40 02 00 00 26 9a 43 98 42 |
08:49:37.024 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.024 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.038 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:37.060 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:37.060 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:37.067 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:37.067 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 18 4b d0 b2 42 0b d0 55 20 2d 4b 1b 68 |
08:49:37.084 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.084 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.124 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.124 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.138 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:37.162 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:37.162 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:37.163 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:37.163 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 24 18 62 2d 4b 1b 68 14 33 9f 42 00 d2 |
08:49:37.183 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.183 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.223 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.223 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.237 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:37.262 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:37.262 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:37.264 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:37.264 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 30 1f 00 01 26 e7 61 63 6b 1f 27 88 00 |
08:49:37.284 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.284 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.323 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.323 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.338 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:37.362 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:37.362 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:37.364 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:37.364 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 3c c0 58 01 23 07 40 40 06 bb 40 80 0f |
08:49:37.387 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.387 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.438 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.438 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.445 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:37.462 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:37.463 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:37.467 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:37.467 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 48 39 d0 00 2a 33 d0 60 6a 03 43 63 62 |
08:49:37.498 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 255 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.498 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.525 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.525 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.539 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:37.562 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:37.563 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:37.564 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:37.564 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 54 a0 6b 00 28 05 d0 53 1e 9a 41 00 23 |
08:49:37.585 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 3 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.585 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.625 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.625 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.639 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:37.662 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:37.663 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:37.693 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:37.697 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 60 d2 b2 ff f7 0f fa 22 6a e3 68 11 00 |
08:49:37.712 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 7 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.713 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.752 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.752 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.767 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:37.793 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:37.793 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:37.800 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:37.800 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 6c 6b 40 e3 60 63 6a 19 43 0a d0 55 20 |
08:49:37.815 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 11 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.815 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.855 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.855 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:37.869 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:37.893 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:37.893 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:37.915 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 15 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:37.916 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.017 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:38.017 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 78 17 49 09 68 08 62 17 49 09 68 08 00 |
08:49:38.061 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.061 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.076 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:38.099 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:38.099 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:38.122 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 19 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.122 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.215 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:38.215 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 84 14 30 14 31 23 d0 e0 61 14 49 15 4d |
08:49:38.260 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.260 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.274 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:38.303 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:38.303 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:38.326 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 23 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.326 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.410 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:38.410 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 90 08 68 89 68 92 00 9b 00 15 50 5d 50 |
08:49:38.454 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.454 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.468 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:38.501 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:38.501 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:38.513 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:38.513 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 9c 00 23 a2 6a 63 62 92 00 23 62 13 50 |
08:49:38.525 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.525 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.565 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.565 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.579 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:38.602 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:38.604 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:38.626 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.626 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.702 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:38.703 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef a8 e2 6a 92 00 53 50 e3 62 a3 62 30 00 |
08:49:38.747 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.747 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.761 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:38.784 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:38.785 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:38.789 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:38.789 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef b4 f8 bd e0 6a 03 43 e3 62 ca e7 00 2a |
08:49:38.823 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.823 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.850 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.850 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.862 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:38.885 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:38.885 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:38.891 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:38.891 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef c0 03 d0 20 6a 03 43 23 62 c4 e7 a0 6a |
08:49:38.907 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.907 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.949 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:38.949 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:38.961 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:38.985 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:38.985 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:39.009 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:39.009 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:39.115 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.131->1/2/61 L_Data.ind, low priority hop count 6, tpdu 00 80 18 ff |
08:49:39.168 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:39.168 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef cc 03 43 a3 62 c0 e7 01 21 e1 61 d9 e7 |
08:49:39.213 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:39.213 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:39.226 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:39.262 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:39.262 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:39.273 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:39.273 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef d8 b8 02 00 10 a0 02 00 10 b8 77 00 00 |
08:49:39.285 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:39.285 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:39.332 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:39.333 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:39.347 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:39.370 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:39.370 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:39.394 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:39.394 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:39.504 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:39.504 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef e4 ff ff 00 00 f7 b5 0e 00 e0 21 04 00 |
08:49:39.548 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:39.548 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:39.568 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:39.595 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:39.595 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:39.619 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:39.619 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:39.670 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:39.670 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef f0 c9 01 1e 48 01 92 1f 00 00 f0 ec ff |
08:49:39.715 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:39.715 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:39.728 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:39.752 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:39.773 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:39.790 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:39.790 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef fc 1c 4d 28 00 |
08:49:39.798 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:39.798 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:39.825 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:39.825 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:39.842 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:39.863 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:39.863 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:39.886 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:39.886 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:39.903 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:39.904 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4000 with 256 bytes and CRC32 0x02EB38E0 |
08:49:39.904 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ee 00 01 00 40 00 00 e0 38 eb 02 |
08:49:39.954 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:39.954 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:39.976 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:39.982 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:39.982 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:39.986 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 23,9% |
08:49:40.002 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 00 02 f0 9a f8 1b 4b 1c 49 18 68 02 f0 |
08:49:40.008 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.008 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.069 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.069 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.071 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:40.084 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:40.084 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:40.101 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:40.101 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 0c 7b ff 2b 68 01 38 d8 60 20 22 02 21 |
08:49:40.109 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.110 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.147 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.147 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.163 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:40.184 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:40.185 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:40.187 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:40.187 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 18 28 00 02 f0 9f f8 16 22 2b 68 28 00 |
08:49:40.209 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.209 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.247 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.247 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.261 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:40.295 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:40.295 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:40.297 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:40.297 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 24 1a 62 59 6f 12 3a 0a 43 5a 67 03 21 |
08:49:40.311 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.5->6/2/2 L_Data.ind, low priority hop count 6, tpdu 00 80 02 f8 |
08:49:40.332 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.333 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.370 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.370 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.389 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:40.408 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:40.408 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:40.421 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:40.421 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 30 02 22 02 f0 93 f8 55 22 01 21 2b 68 |
08:49:40.433 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.433 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.488 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.488 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.490 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:40.508 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:40.508 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:40.521 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:40.521 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 3c 5a 62 5a 68 0a 43 5a 60 0d 4b 1b 68 |
08:49:40.549 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.549 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.570 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.570 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.593 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:40.608 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:40.609 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:40.612 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:40.612 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 48 1a 00 14 32 14 33 00 d1 0a 00 01 23 |
08:49:40.633 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.633 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.673 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.673 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.687 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:40.713 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:40.717 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:40.723 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:40.723 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 54 bb 40 01 3b b3 43 e3 60 01 9b 67 60 |
08:49:40.743 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.743 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.779 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.780 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.793 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:40.817 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:40.817 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:40.819 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:40.819 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 60 23 61 00 23 a6 60 e2 61 a3 63 f7 bd |
08:49:40.839 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.839 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.879 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.879 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.893 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:40.916 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:40.916 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:40.940 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:40.944 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:40.947 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:40.948 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 6c 62 42 35 0e b8 02 00 10 dc 00 00 10 |
08:49:41.008 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:41.008 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:41.010 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:41.036 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:41.036 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:41.037 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:41.037 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 78 a0 86 01 00 a0 02 00 10 81 63 70 47 |
08:49:41.062 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:41.062 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:41.099 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:41.099 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:41.115 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:41.135 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:41.136 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:41.173 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:41.174 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:41.270 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:41.271 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 84 05 4b 06 4a 1a 60 00 22 5a 60 9a 60 |
08:49:41.316 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:41.316 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:41.329 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:41.362 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:41.362 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:41.380 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:41.381 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 90 da 60 1a 61 9a 61 da 61 70 47 c0 46 |
08:49:41.388 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:41.388 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:41.426 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:41.427 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:41.457 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:41.466 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:41.466 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:41.488 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:41.488 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 9c 64 02 00 10 78 77 00 00 00 69 70 47 |
08:49:41.489 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:41.489 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:41.533 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:41.533 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:41.548 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:41.570 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:41.571 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:41.608 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:41.608 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:41.736 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:41.737 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef a8 00 69 01 30 70 47 00 69 02 30 70 47 |
08:49:41.781 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:41.782 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:41.796 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:41.830 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:41.832 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:41.855 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:41.855 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:41.959 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:41.959 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef b4 00 69 03 30 70 47 00 69 04 30 70 47 |
08:49:42.004 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.004 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.018 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:42.041 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:42.048 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:42.055 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:42.055 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef c0 00 69 05 30 70 47 00 69 06 30 70 47 |
08:49:42.070 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.070 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.110 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.110 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.124 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:42.154 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:42.154 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:42.171 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:42.172 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef cc 00 69 07 30 70 47 00 69 08 30 70 47 |
08:49:42.180 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.180 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.218 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.218 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.232 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:42.255 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:42.255 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:42.263 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:42.263 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef d8 00 69 09 30 70 47 00 69 0a 30 70 47 |
08:49:42.278 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.278 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.318 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.318 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.332 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:42.355 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:42.355 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:42.379 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.379 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.427 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:42.427 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef e4 00 69 0b 30 70 47 00 69 0c 30 70 47 |
08:49:42.472 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.472 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.486 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:42.509 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:42.509 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:42.531 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.531 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.542 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:42.542 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef f0 00 69 0d 30 70 47 00 69 0e 30 70 47 |
08:49:42.587 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.587 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.601 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:42.624 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:42.624 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:42.646 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.646 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.654 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:42.654 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef fc 00 69 0f 30 |
08:49:42.687 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.687 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.702 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:42.725 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:42.725 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:42.746 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:42.747 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.747 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.793 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4100 with 256 bytes and CRC32 0x802835C4 |
08:49:42.793 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ee 00 01 00 41 00 00 c4 35 28 80 |
08:49:42.834 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.834 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.848 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:42.872 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:42.872 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:42.874 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 25,2% |
08:49:42.876 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 00 70 47 00 69 10 30 70 47 00 69 11 30 |
08:49:42.898 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.898 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.935 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.935 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:42.949 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:42.972 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:42.975 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:42.977 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:42.977 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 0c 70 47 00 69 12 30 70 47 00 69 13 30 |
08:49:42.997 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:42.997 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:43.037 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:43.037 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:43.051 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:43.069 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:49:43.070 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:49:43.091 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:43.091 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:43.111 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:43.111 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:49:43.133 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:43.133 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:45.062 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.55->3/5/40 L_Data.ind, low priority hop count 6, tpdu 00 80 07 71 |
08:49:45.550 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.5->6/3/3 L_Data.ind, low priority hop count 6, tpdu 00 80 0e 77 |
08:49:46.060 | main | WARN | org.selfbus.updater.DeviceManagement | sendWithRetry | 345 | ?[0;31mUPDCommand.SEND_DATA timeout waiting for data response : KNXTimeoutException?[0m |
08:49:46.063 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80 |
08:49:46.086 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.086 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.087 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 0c 70 47 00 69 12 30 70 47 00 69 13 30 |
08:49:46.134 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.134 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.148 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:46.171 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:46.171 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:46.173 | main | WARN | org.selfbus.updater.DeviceManagement | doFlash | 268 | ?[0;31mx?[0m |
08:49:46.176 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 0c 70 47 00 69 12 30 70 47 00 69 13 30 |
08:49:46.194 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.194 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.233 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.234 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.248 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:46.271 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:46.272 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:46.273 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:46.273 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 18 70 47 00 69 14 30 70 47 00 69 15 30 |
08:49:46.294 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.300 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.334 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.334 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.348 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:46.371 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:46.373 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:46.376 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:46.376 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 24 70 47 00 69 16 30 70 47 00 69 17 30 |
08:49:46.397 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.397 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.438 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.438 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.450 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:46.474 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:46.474 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:46.490 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:46.490 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 30 70 47 00 69 19 30 70 47 00 69 ff 30 |
08:49:46.498 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.499 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.536 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.536 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.554 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:46.574 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:46.574 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:46.596 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.596 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.647 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:46.647 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 3c 70 47 00 69 62 30 70 47 00 69 63 30 |
08:49:46.691 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.691 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.706 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:46.729 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:46.729 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:46.737 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:46.737 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 48 70 47 60 20 70 47 61 20 70 47 01 48 |
08:49:46.752 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.752 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.792 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.792 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.807 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:46.830 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:46.830 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:46.833 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:46.833 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 54 70 47 c0 46 a8 77 00 00 12 20 70 47 |
08:49:46.857 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.32->6/1/11 L_Data.ind, low priority hop count 6, tpdu 00 80 07 30 |
08:49:46.875 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.875 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.915 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.915 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:46.929 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:46.952 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:46.952 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:46.962 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:46.962 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 60 17 20 70 47 70 b5 03 79 00 2b 01 d1 |
08:49:46.977 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:46.977 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.014 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.014 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.028 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:47.051 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:47.051 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:47.066 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:47.066 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 6c 00 20 70 bd 83 6e c0 6e 1c 7d 5d 7d |
08:49:47.077 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.077 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.113 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.113 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.127 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:47.151 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:47.151 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:47.158 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:47.158 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 78 03 68 9b 6c 98 47 09 23 00 78 1c 40 |
08:49:47.173 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.173 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.213 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.213 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.227 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:47.250 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:47.250 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:47.269 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:47.269 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 84 08 2c f1 d1 01 2d ef d1 ff 38 43 42 |
08:49:47.275 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.275 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.314 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.315 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.328 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:47.351 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:47.352 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:47.354 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:47.354 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 90 58 41 c0 b2 eb e7 81 82 70 47 00 20 |
08:49:47.377 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.377 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.415 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.415 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.429 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:47.452 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:47.452 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:47.476 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.476 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.482 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:47.483 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 9c 70 47 e0 23 9b 00 99 42 02 d1 01 23 |
08:49:47.527 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.527 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.541 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:47.565 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:47.565 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:47.588 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.588 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.624 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:47.624 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef a8 4c 30 03 70 00 20 70 47 00 22 83 6a |
08:49:47.669 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.669 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.683 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:47.706 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:47.706 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:47.708 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:47.708 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef b4 9a 60 70 47 bf f3 4f 8f 02 4b 03 4a |
08:49:47.728 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 235 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.728 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.768 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.768 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.782 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:47.805 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:47.805 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:47.831 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.831 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.831 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:47.831 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef c0 da 60 bf f3 4f 8f fe e7 00 ed 00 e0 |
08:49:47.876 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.876 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.890 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:47.913 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:47.913 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:47.937 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:47.937 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:47.957 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:47.957 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef cc 04 00 fa 05 70 b5 04 00 00 6d 0d 00 |
08:49:48.003 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.003 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.016 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:48.040 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:48.040 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:48.041 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:48.041 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef d8 03 68 db 6e 98 47 06 78 20 6d 36 02 |
08:49:48.062 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 247 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.062 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.101 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.102 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.116 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:48.139 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:48.140 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:48.163 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 251 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.163 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.197 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:48.197 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef e4 03 68 db 6e 98 47 43 78 33 43 9d 42 |
08:49:48.223 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.131->1/2/41 L_Data.ind, low priority hop count 6, tpdu 00 80 19 1a |
08:49:48.263 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.263 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.276 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:48.299 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:48.299 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:48.321 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.321 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.349 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:48.349 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef f0 11 d0 20 6d 03 68 db 6e 98 47 2b 0a |
08:49:48.394 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.394 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.408 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:48.431 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:48.431 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:48.455 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.456 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.463 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:48.464 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef fc 03 70 20 6d |
08:49:48.496 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.496 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.511 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:48.534 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:48.534 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:48.546 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:48.547 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4200 with 256 bytes and CRC32 0xD9F18366 |
08:49:48.547 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ee 00 01 00 42 00 00 66 83 f1 d9 |
08:49:48.558 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.558 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.593 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.593 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.607 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:48.631 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:48.631 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:48.632 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 26,6% |
08:49:48.633 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 03 68 db 6e 98 47 01 23 45 70 22 6d |
08:49:48.653 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.653 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.693 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.693 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.707 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:48.730 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:48.730 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:48.743 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:48.743 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c 13 75 03 4b 1b 68 32 33 93 61 a5 82 |
08:49:48.754 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.754 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.793 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.794 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.811 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:48.831 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:48.831 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:48.847 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:48.847 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 18 70 bd c0 46 a0 02 00 10 70 b5 05 00 |
08:49:48.857 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.857 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.896 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.897 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.911 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:48.934 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:48.934 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:48.941 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:48.941 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 24 00 6d 0c 00 03 68 db 68 98 47 00 28 |
08:49:48.957 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.957 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:48.997 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:48.997 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.012 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:49.035 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:49.035 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:49.037 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:49.037 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 30 05 d0 28 6d 03 68 21 00 1b 68 98 47 |
08:49:49.057 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.057 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.097 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.098 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.111 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:49.134 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:49.135 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:49.137 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:49.137 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 3c 70 bd 68 6b 21 00 03 68 db 68 98 47 |
08:49:49.158 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.158 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.198 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.198 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.212 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:49.235 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:49.235 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:49.237 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:49.237 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 48 00 28 f7 d0 68 6b f1 e7 37 b5 14 00 |
08:49:49.257 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.258 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.304 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.304 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.312 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:49.335 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:49.336 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:49.360 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.360 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.376 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:49.377 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 54 f0 22 01 25 c0 6b 92 00 0a 40 6d 42 |
08:49:49.421 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.421 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.439 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:49.458 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:49.459 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:49.475 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:49.475 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 60 01 68 00 95 cd 68 21 00 a8 47 01 20 |
08:49:49.488 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.488 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.528 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.528 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.536 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:49.559 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:49.559 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:49.584 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.584 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.759 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:49.759 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 6c 3e bd c0 23 f7 b5 08 9c 05 00 9b 00 |
08:49:49.802 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.802 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.818 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:49.841 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:49.841 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:49.843 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:49.843 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 78 99 42 69 d0 0b d8 80 20 0e 00 01 3b |
08:49:49.862 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.862 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.902 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.902 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:49.917 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:49.941 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:49.941 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:49.952 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:49.952 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 84 ff 3b 86 43 9e 42 20 d0 80 3b 99 42 |
08:49:49.962 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:49.962 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.002 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.002 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.018 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:50.041 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:50.041 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:50.047 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:50.047 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 90 0e d0 00 20 fe bd 4b 4b 99 42 6d d0 |
08:49:50.061 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.061 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.101 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.102 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.117 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:50.140 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:50.140 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:50.142 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:50.142 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 9c 4a 4b 99 42 00 d1 85 e0 e0 23 9b 00 |
08:49:50.161 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.161 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.201 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.201 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.217 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:50.240 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:50.241 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:50.243 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:50.243 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef a8 99 42 f2 d1 4c 35 6a e0 64 21 d3 79 |
08:49:50.262 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.262 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.302 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.302 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.318 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:50.341 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:50.341 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:50.354 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:50.354 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef b4 12 7a 61 71 63 39 a1 71 41 39 0b 43 |
08:49:50.362 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.362 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.402 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.402 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.417 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:50.441 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:50.441 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:50.449 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:50.449 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef c0 e3 71 00 23 22 72 63 72 a3 72 01 20 |
08:49:50.461 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.461 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.501 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.501 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.517 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:50.540 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:50.540 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:50.546 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:50.546 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef cc e2 e7 0f 23 d6 79 10 7a 1e 40 53 7a |
08:49:50.561 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.561 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.602 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.602 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.617 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:50.640 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:50.640 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:50.642 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:50.642 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef d8 1b 02 03 43 a0 20 5b ba 9b b2 01 93 |
08:49:50.661 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.661 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.701 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.701 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.716 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:50.739 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:50.739 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:50.743 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:50.743 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef e4 80 00 2b 68 81 42 1a d0 22 00 2b 68 |
08:49:50.761 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.761 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.801 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.801 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.816 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:50.839 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:50.840 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:50.843 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:50.843 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef f0 28 00 5b 6c 01 99 1f 00 0a 32 33 00 |
08:49:50.861 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.861 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.902 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.902 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.917 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:50.940 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:50.940 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:50.942 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:50.942 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef fc b8 47 43 1e |
08:49:50.961 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.961 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:50.990 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:50.990 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.005 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:51.028 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:51.028 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:51.031 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:51.032 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4300 with 256 bytes and CRC32 0xE2F806E9 |
08:49:51.033 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ee 00 01 00 43 00 00 e9 06 f8 e2 |
08:49:51.050 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.050 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.085 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.085 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.103 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:51.125 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:51.125 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:51.127 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 27,9% |
08:49:51.128 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 00 98 41 40 42 06 40 33 00 63 33 63 71 |
08:49:51.146 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.146 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.186 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.186 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.202 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:51.225 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:51.225 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:51.227 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:51.227 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 0c 02 23 a3 71 3e 33 33 43 e3 71 01 9b |
08:49:51.246 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.246 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.286 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.286 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.302 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:51.325 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:51.325 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:51.328 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:51.329 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 18 1b 0a 23 72 01 9b 63 72 d3 e7 1b 6c |
08:49:51.346 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.346 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.386 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.386 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.402 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:51.425 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:51.425 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:51.429 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:51.429 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 24 28 00 1f 00 01 99 33 00 0a 32 b8 47 |
08:49:51.446 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.446 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.487 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.487 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.502 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:51.526 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:51.526 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:51.528 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:51.528 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 30 00 28 ae d0 2b 68 28 00 9b 6b 98 47 |
08:49:51.549 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.549 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.586 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.586 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.602 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:51.625 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:51.625 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:51.627 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:51.627 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 3c 1f 28 a8 d9 68 6b 03 68 5b 69 98 47 |
08:49:51.646 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.646 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.686 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.686 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.702 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:51.725 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:51.729 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:51.735 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:51.735 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 48 03 78 5b 07 a1 d5 cd e7 d3 79 9b 06 |
08:49:51.749 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.749 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.789 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.789 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.805 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:51.828 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:51.833 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:51.835 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:51.835 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 54 9d d1 63 23 63 71 60 3b a3 71 3d 33 |
08:49:51.854 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.854 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.894 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.894 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.909 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:51.932 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:51.932 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:51.935 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:51.935 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 60 e3 71 03 68 9b 6b 98 47 00 0a 20 72 |
08:49:51.954 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.954 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:51.994 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:51.994 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.010 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:52.033 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:52.033 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:52.043 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:52.043 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 6c 2b 68 28 00 9b 6b 98 47 60 72 a8 e7 |
08:49:52.053 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.053 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.093 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.096 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.110 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:52.135 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:52.135 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:52.145 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:52.147 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 78 53 7a 12 7a 4c 35 07 2a 01 d1 ff 2b |
08:49:52.157 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.158 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.199 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.199 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.215 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:52.238 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:52.238 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:52.241 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:52.241 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 84 02 d0 01 23 2b 70 82 e7 64 23 63 71 |
08:49:52.259 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.259 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.299 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.299 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.315 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:52.338 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:52.341 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:52.362 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.362 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.397 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:52.397 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 90 61 3b a3 71 9e 33 e3 71 00 23 23 72 |
08:49:52.439 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.440 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.455 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:52.479 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:52.479 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:52.500 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.500 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.522 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:52.523 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 9c 63 72 01 33 a3 72 80 23 09 4a 5b 05 |
08:49:52.566 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.566 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.582 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:52.605 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:52.605 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:52.612 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:52.612 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef a8 1a 60 02 23 2b 70 8c e7 62 23 63 71 |
08:49:52.625 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.625 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.665 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.665 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.681 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:52.705 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:52.705 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:52.719 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:52.720 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef b4 5f 3b a3 71 cf 33 e3 71 00 23 23 72 |
08:49:52.727 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.727 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.765 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.765 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.781 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:52.805 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:52.805 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:52.807 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:52.807 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef c0 83 e7 c0 46 81 03 00 00 d1 03 00 00 |
08:49:52.825 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.826 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.865 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.866 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.881 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:52.904 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:52.904 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:52.907 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:52.907 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef cc 55 b0 1f 5e 01 00 30 b5 6a 31 0b 88 |
08:49:52.926 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.926 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.966 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:52.967 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:52.982 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:53.004 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:53.004 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:53.009 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:53.009 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef d8 9b b2 03 61 c3 6c 00 2b 0f d0 00 24 |
08:49:53.027 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.027 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.067 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.067 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.081 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:53.105 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:53.105 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:53.109 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:53.109 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef e4 80 25 c4 64 02 68 0b 88 2b 40 55 1d |
08:49:53.127 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.127 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.167 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.167 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.182 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:53.205 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:53.206 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:53.209 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:53.210 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef f0 ec 77 94 1d e5 7f 01 2d 10 d1 5a 42 |
08:49:53.227 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.227 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.267 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.267 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.283 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:53.306 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:53.306 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:53.310 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:53.310 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef fc 53 41 5b 00 |
08:49:53.327 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.327 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.356 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.356 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.372 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:53.395 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:53.395 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:53.399 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:53.402 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4400 with 256 bytes and CRC32 0x666DCD72 |
08:49:53.403 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ee 00 01 00 44 00 00 72 cd 6d 66 |
08:49:53.417 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.417 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.452 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.452 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.468 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:53.491 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:53.491 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:53.493 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 29,2% |
08:49:53.494 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 00 e3 77 00 23 01 22 0b 80 42 75 02 00 |
08:49:53.513 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.513 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.553 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.553 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.569 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:53.592 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:53.592 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:53.595 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:53.595 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 0c 03 63 83 64 83 63 6c 32 6e 30 13 80 |
08:49:53.613 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.613 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.653 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.653 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.669 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:53.691 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:53.691 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:53.695 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:53.695 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 18 03 70 30 bd 07 32 d4 7f 01 2c ee d1 |
08:49:53.713 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.713 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.753 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.753 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.768 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:53.791 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:53.792 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:53.794 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:53.794 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 24 5c 42 63 41 5b 00 d3 77 e9 e7 03 68 |
08:49:53.812 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.812 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.852 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.852 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.868 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:53.891 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:53.891 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:53.896 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:53.896 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 30 70 b5 9b 68 04 00 0d 00 98 47 43 78 |
08:49:53.912 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.912 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.952 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:53.952 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:53.968 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:53.991 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:53.991 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:53.994 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:53.994 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 3c 00 20 05 2b 04 d9 23 68 29 00 20 00 |
08:49:54.012 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.012 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.053 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.053 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.068 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:54.091 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:54.091 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:54.097 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:54.097 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 48 5b 68 98 47 70 bd 30 b5 04 00 0d 00 |
08:49:54.112 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.112 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.152 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.152 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.168 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:54.191 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:54.194 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:54.196 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:54.196 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 54 85 b0 0a 22 0b 49 01 a8 02 f0 05 ff |
08:49:54.215 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.215 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.255 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.255 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.270 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:54.293 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:54.293 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:54.305 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:54.305 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 60 23 68 29 00 9b 68 20 00 98 47 43 78 |
08:49:54.314 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.314 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.355 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.356 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.370 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:54.393 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:54.393 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:54.395 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:54.395 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 6c 01 20 05 2b 05 dd 0f 2b 05 dc 01 aa |
08:49:54.415 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.415 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.453 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.454 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.469 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:54.492 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:54.492 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:54.498 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:54.504 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 78 d3 18 06 3b 18 78 05 b0 30 bd 01 20 |
08:49:54.513 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.516 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.553 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.553 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.568 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:54.592 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:54.592 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:54.601 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:54.601 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 84 40 42 fa e7 ad 77 00 00 43 68 10 b5 |
08:49:54.613 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.613 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.653 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.653 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.668 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:54.692 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:54.692 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:54.697 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:54.697 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 90 04 00 18 6d 03 68 db 6d 98 47 01 78 |
08:49:54.716 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.36->13/3/0 L_Data.ind, low priority hop count 6, tpdu 00 80 00 00 |
08:49:54.735 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.735 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.775 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.775 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.791 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:54.814 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:54.814 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:54.818 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:54.818 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 9c 08 1e 06 d0 60 68 03 6d 5b 68 c9 18 |
08:49:54.834 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.835 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.875 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.875 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.891 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:54.914 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:54.914 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:54.917 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:54.918 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef a8 89 b2 ff f7 b9 fe 10 bd 03 68 10 b5 |
08:49:54.935 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.935 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.975 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:54.975 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:54.991 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:55.014 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:55.015 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:55.019 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:55.019 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef b4 1b 69 04 00 98 47 00 28 03 d0 41 78 |
08:49:55.036 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.036 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.076 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.077 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.092 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:55.115 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:55.116 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:55.119 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:55.120 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef c0 60 68 ff f7 ad fe 10 bd 03 68 10 b5 |
08:49:55.136 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.136 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.176 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.176 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.192 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:55.216 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:55.216 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:55.219 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:55.220 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef cc 1b 69 0c 00 98 47 00 28 03 d0 03 21 |
08:49:55.237 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.238 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.277 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.278 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.293 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:55.316 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:55.316 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:55.321 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:55.321 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef d8 61 43 02 31 40 18 10 bd 10 b5 04 00 |
08:49:55.338 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.338 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.378 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.379 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.393 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:55.416 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:55.417 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:55.420 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:55.420 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef e4 ff f7 f0 ff 03 1e 0b d0 5b 78 01 78 |
08:49:55.438 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.438 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.479 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.479 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.494 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:55.517 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:55.518 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:55.521 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:55.522 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef f0 60 68 9b 06 03 d5 03 6d 5b 68 c9 18 |
08:49:55.538 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.538 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.579 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.579 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.595 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:55.618 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:55.618 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:55.620 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:55.621 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef fc 89 b2 ff f7 |
08:49:55.639 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.640 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.668 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.668 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.684 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:55.707 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:55.707 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:55.712 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:55.714 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4500 with 256 bytes and CRC32 0x08B2636C |
08:49:55.715 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ee 00 01 00 45 00 00 6c 63 b2 08 |
08:49:55.729 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.729 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.765 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.765 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.781 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:55.804 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:55.804 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:55.806 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 30,5% |
08:49:55.809 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 00 8f fe 03 00 18 00 10 bd 10 b5 ff f7 |
08:49:55.829 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.34->6/1/12 L_Data.ind, low priority hop count 6, tpdu 00 80 07 0c |
08:49:55.846 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.846 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.886 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.889 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.902 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:55.926 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:55.926 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:55.927 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:55.927 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 0c dd ff 01 30 10 bd 00 23 42 1d 43 71 |
08:49:55.946 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.946 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:55.986 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:55.986 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.002 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:56.025 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:56.025 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:56.027 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:56.027 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 18 d3 77 82 1d d3 77 c2 1d d3 77 01 22 |
08:49:56.045 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.046 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.085 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.085 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.105 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:56.124 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:56.125 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:56.126 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:56.127 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 24 52 42 02 81 02 32 02 71 02 4a c3 80 |
08:49:56.145 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.145 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.185 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.185 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.201 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:56.224 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:56.224 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:56.253 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->10/1/0 L_Data.ind, low priority hop count 6, tpdu 00 80 03 48 |
08:49:56.255 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:56.255 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 30 c3 60 93 80 d3 80 70 47 a0 02 00 10 |
08:49:56.275 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 51 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.275 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.315 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.315 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.331 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:56.354 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:56.354 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:56.364 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:56.364 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 3c 02 22 43 1d 10 b5 da 77 0f 23 81 69 |
08:49:56.375 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 55 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.375 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.415 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.415 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.431 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:56.454 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:56.454 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:56.460 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:56.460 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 48 4a 79 1a 40 03 68 07 32 9b 6a 98 47 |
08:49:56.474 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 59 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.474 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.514 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.514 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.530 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:56.555 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:56.556 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:56.558 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:56.558 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 54 10 bd 10 b5 43 6b 1b 7d db 07 10 d5 |
08:49:56.576 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 63 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.577 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.616 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.617 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.632 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:56.655 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:56.656 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:56.668 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:56.668 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 60 c0 29 05 d0 80 23 5b 00 99 42 0c d0 |
08:49:56.676 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 67 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.676 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.716 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.716 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.732 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:56.755 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:56.755 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:56.757 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:56.757 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 6c 00 20 10 bd 51 7a 13 7a 09 02 19 43 |
08:49:56.776 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 71 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.776 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.817 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.817 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.831 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:56.856 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:56.856 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:56.857 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:56.857 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 78 03 68 49 ba db 68 89 b2 98 47 01 20 |
08:49:56.876 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 75 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.876 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.917 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.917 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:56.932 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:56.955 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:56.955 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:56.959 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:56.959 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 84 f3 e7 43 1d da 7f d1 b2 00 2a fb d1 |
08:49:56.977 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:56.977 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.018 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.018 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.033 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:57.056 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:57.056 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:57.061 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:57.061 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 90 01 32 da 77 83 69 b0 24 d9 70 19 71 |
08:49:57.078 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.078 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.118 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.118 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.134 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:57.158 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:57.158 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:57.164 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:57.164 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 9c e1 21 9a 71 3f 32 1c 70 59 71 da 71 |
08:49:57.184 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.184 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.223 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.223 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.239 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:57.262 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:57.262 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:57.267 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:57.267 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef a8 ff f7 c8 ff e9 e7 f0 b5 85 b0 03 93 |
08:49:57.284 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.284 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.324 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.325 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.340 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:57.363 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:57.364 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:57.367 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:57.368 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef b4 03 68 02 91 1b 68 04 00 17 00 98 47 |
08:49:57.385 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.385 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.425 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.425 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.441 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:57.464 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:57.464 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:57.468 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:57.469 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef c0 02 99 06 00 20 00 ff f7 32 ff 63 68 |
08:49:57.485 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.485 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.525 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.525 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.541 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:57.564 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:57.564 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:57.568 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:57.568 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef cc 5a 1d d1 7f cd b2 ac 46 00 29 fa d1 |
08:49:57.586 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.586 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.625 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.626 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.642 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:57.664 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:57.665 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:57.668 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:57.668 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef d8 01 31 d1 77 9b 69 bc 22 b9 b2 1f 71 |
08:49:57.686 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.686 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.726 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.726 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.742 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:57.765 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:57.765 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:57.768 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:57.769 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef e4 0f 27 1a 70 0a 0a da 70 42 1c 17 40 |
08:49:57.787 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.787 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.826 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.826 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.842 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:57.865 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:57.865 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:57.867 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:57.867 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef f0 20 22 52 42 3a 43 5a 71 03 9a 80 27 |
08:49:57.885 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 115 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.885 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.925 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.925 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:57.941 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:57.964 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:57.964 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:57.966 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:57.966 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef fc 00 2a 00 d0 |
08:49:57.984 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:57.984 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.013 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.013 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.030 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:58.053 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:58.053 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:58.057 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:58.058 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4600 with 256 bytes and CRC32 0x5C153E16 |
08:49:58.058 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ee 00 01 00 46 00 00 16 3e 15 5c |
08:49:58.073 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.073 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.109 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.109 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.125 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:58.148 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:58.148 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:58.153 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 31,9% |
08:49:58.158 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 00 40 3f 00 28 1f d0 1a 00 01 3e 08 32 |
08:49:58.170 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.170 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.210 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.210 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.226 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:58.249 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:58.253 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:58.255 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:58.255 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 0c 00 28 15 dc 62 46 00 26 3a 43 9e 71 |
08:49:58.273 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.273 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.314 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.314 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.329 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:58.352 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:58.352 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:58.363 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:58.363 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 18 da 71 02 98 22 68 00 90 d7 68 20 00 |
08:49:58.374 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.374 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.414 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.414 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.429 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:49:58.453 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:49:58.453 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:49:58.461 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:58.461 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 24 80 22 b8 47 60 68 ff f7 87 ff 02 9b |
08:49:58.473 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.473 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.513 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.513 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.529 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:49:58.552 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:49:58.555 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:49:58.557 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:58.557 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 30 e3 60 63 68 9b 6a 5e 75 05 b0 f0 bd |
08:49:58.575 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.575 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.616 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.616 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.631 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:49:58.655 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:49:58.654 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:49:58.656 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:58.656 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 3c 35 5c 01 38 15 70 01 32 e2 e7 32 78 |
08:49:58.675 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.675 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.715 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.715 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.731 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:49:58.754 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:49:58.754 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:49:58.756 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:58.756 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 48 94 46 e1 e7 f0 b5 89 b0 06 93 43 68 |
08:49:58.774 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.774 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.814 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.814 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.830 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:49:58.854 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:49:58.854 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:49:58.856 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:58.856 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 54 04 00 98 6b 04 91 03 68 05 92 9b 68 |
08:49:58.874 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 155 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.874 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.915 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.915 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:58.930 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:49:58.953 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:49:58.953 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:49:58.957 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:58.957 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 60 98 47 63 68 05 78 01 90 98 6b 04 99 |
08:49:58.975 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 159 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:58.975 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.014 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.016 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.031 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:49:59.053 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:49:59.053 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:49:59.057 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:59.058 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 6c 03 68 1b 68 98 47 03 90 00 28 08 db |
08:49:59.075 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 163 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.075 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.115 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.116 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.130 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:49:59.154 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:49:59.154 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:49:59.159 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:59.159 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 78 6b 00 07 93 01 9b 5f 1c 01 9b 07 9a |
08:49:59.176 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 167 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.176 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.216 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.216 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.233 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:49:59.255 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:49:59.255 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:49:59.259 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:59.260 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 84 fb 1a 9a 42 01 da 09 b0 f0 bd 3b 78 |
08:49:59.277 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 171 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.277 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.317 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.317 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.332 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:49:59.355 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:49:59.355 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:49:59.359 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:59.359 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 90 03 9a 93 42 38 d1 7d 78 0e 9b 9d 42 |
08:49:59.377 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 175 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.377 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.417 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.417 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.432 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:49:59.456 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:49:59.456 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:49:59.460 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:59.460 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 9c 34 d0 23 68 29 00 9b 68 20 00 98 47 |
08:49:59.478 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 179 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.478 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.517 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.517 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.534 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:49:59.556 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:49:59.556 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:49:59.560 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:59.560 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef a8 40 22 05 9e 03 78 40 3e 96 43 32 d1 |
08:49:59.579 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 183 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.579 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.618 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.618 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.634 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:49:59.657 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:49:59.657 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:49:59.662 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:59.662 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef b4 2c 3a 13 40 93 42 25 d1 23 68 29 00 |
08:49:59.679 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.680 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.720 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.720 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.735 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:49:59.759 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:49:59.759 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:49:59.760 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:59.760 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef c0 20 00 1b 68 98 47 02 90 00 28 1d d0 |
08:49:59.779 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.779 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.819 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.819 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.834 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:49:59.858 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:49:59.858 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:49:59.868 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:59.868 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef cc 29 00 20 00 ff f7 ad fe 00 28 19 dd |
08:49:59.878 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.878 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.918 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.918 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:49:59.934 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:49:59.957 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:49:59.957 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:49:59.965 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:49:59.965 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef d8 06 9a c3 1d d3 18 72 42 9a 5c 02 99 |
08:49:59.978 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:49:59.978 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.018 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.018 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.034 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:00.057 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:00.057 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:00.064 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:00.064 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef e4 8a 55 01 36 86 42 f8 d1 23 68 20 00 |
08:50:00.077 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.078 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.118 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.118 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.133 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:00.156 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:00.156 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:00.158 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:00.158 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef f0 5b 69 98 47 00 28 07 d0 80 22 eb 07 |
08:50:00.177 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.177 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.218 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.218 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.232 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:00.256 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:00.256 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:00.276 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.277 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.279 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:00.279 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef fc 00 d4 78 3a |
08:50:00.310 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.310 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.327 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:00.350 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:00.350 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:00.353 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:00.354 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4700 with 256 bytes and CRC32 0x6DF220E9 |
08:50:00.354 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ee 00 01 00 47 00 00 e9 20 f2 6d |
08:50:00.372 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.372 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.408 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.408 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.424 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:00.447 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:00.449 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:00.451 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 33,2% |
08:50:00.452 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 00 6d 10 43 5d 13 43 43 55 02 37 b9 e7 |
08:50:00.470 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.470 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.512 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.512 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.525 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:00.548 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:00.548 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:00.553 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:00.554 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 0c 3f 22 06 9b db 79 13 40 02 9a 13 70 |
08:50:00.590 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.5->6/2/0 L_Data.ind, low priority hop count 6, tpdu 00 80 0e 77 |
08:50:00.594 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.594 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.640 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.640 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.648 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:00.687 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:00.693 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:00.712 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:00.712 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 18 e8 e7 05 9a 00 2a f3 d1 0c 32 13 40 |
08:50:00.716 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.716 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.758 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.758 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.774 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:00.801 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:00.801 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:00.821 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:00.821 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 24 93 42 ef d1 01 23 29 00 20 00 04 9a |
08:50:00.835 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.836 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.866 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.866 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.880 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:00.905 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:00.905 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:00.912 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:00.912 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 30 ff f7 3d ff e8 e7 f8 b5 0c 00 41 1d |
08:50:00.944 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.944 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.967 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:00.967 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:00.981 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:01.010 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:01.011 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:01.034 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.034 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.193 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:01.193 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 3c cd 7f 00 2d fc d1 40 26 01 35 cd 77 |
08:50:01.238 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.238 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.252 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:01.278 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:01.278 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:01.294 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:01.294 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 48 17 0a 85 69 d2 b2 34 42 03 d0 99 00 |
08:50:01.304 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.304 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.340 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.340 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.354 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:01.394 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:01.394 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:01.396 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:01.397 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 54 21 43 0e 43 f4 b2 b0 23 2b 70 50 3b |
08:50:01.417 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.417 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.457 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.457 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.471 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:01.494 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:01.494 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:01.515 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:01.516 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 60 ef 70 2a 71 6b 71 ac 71 ff f7 e8 fe |
08:50:01.519 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.519 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.562 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.563 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.575 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:01.611 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:01.611 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:01.613 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:01.613 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 6c f8 bd 0b 4a 10 b5 93 88 04 00 01 33 |
08:50:01.634 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.634 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.673 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.673 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.688 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:01.711 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:01.712 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:01.735 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.735 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.735 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:01.735 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 78 93 80 43 79 00 2b 01 d0 00 23 43 71 |
08:50:01.781 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.785 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.795 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:01.819 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:01.819 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:01.824 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:01.824 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 84 81 21 20 00 e2 88 00 23 ff f7 d3 ff |
08:50:01.846 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.846 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.884 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.885 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:01.902 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:01.922 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:01.922 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:01.955 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:01.956 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 90 23 68 20 00 db 69 98 47 10 bd c0 46 |
08:50:01.956 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:01.956 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.003 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.003 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.020 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:02.050 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:02.050 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:02.052 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:02.052 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 9c a0 02 00 10 00 23 82 1d 07 30 d3 77 |
08:50:02.073 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.073 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.113 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.113 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.127 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:02.150 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:02.150 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:02.153 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:02.153 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef a8 c3 77 70 47 42 68 03 00 00 20 91 42 |
08:50:02.173 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.174 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.214 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.214 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.232 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:02.251 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:02.251 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:02.253 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:02.253 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef b4 03 d3 9b 68 8b 42 40 41 c0 b2 70 47 |
08:50:02.275 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.275 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.314 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.314 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.328 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:02.351 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:02.352 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:02.357 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:02.357 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef c0 03 00 10 b5 00 20 91 42 06 d8 5c 68 |
08:50:02.374 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.374 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.413 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.414 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.428 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:02.451 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:02.451 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:02.474 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.474 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.478 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:02.478 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef cc a1 42 03 d3 9b 68 93 42 40 41 c0 b2 |
08:50:02.522 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.522 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.536 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:02.559 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:02.560 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:02.583 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.583 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.630 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:02.631 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef d8 10 bd 43 68 00 69 c9 1a 40 18 70 47 |
08:50:02.675 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.676 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.690 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:02.713 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:02.713 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:02.715 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:02.715 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef e4 42 68 03 00 89 1a c2 68 00 20 01 3a |
08:50:02.735 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.735 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.775 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.775 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.789 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:02.812 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:02.812 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:02.834 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.834 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.859 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:02.859 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef f0 8a 42 01 d3 1b 69 58 5c 70 47 42 68 |
08:50:02.903 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.903 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.917 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:02.941 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:02.941 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:02.962 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:02.963 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef fc 10 b5 89 1a |
08:50:02.964 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.964 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:02.996 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:02.996 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.011 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:03.034 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:03.034 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:03.057 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.057 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.089 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:03.123 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4800 with 256 bytes and CRC32 0xA245A39D |
08:50:03.168 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ee 00 01 00 48 00 00 9d a3 45 a2 |
08:50:03.208 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.208 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.223 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:03.246 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:03.246 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:03.269 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.269 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.249 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 34,5% |
08:50:03.282 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 00 c2 68 4c 1c 01 3a 03 00 00 20 94 42 |
08:50:03.327 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.327 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.341 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:03.364 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:03.364 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:03.367 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:03.367 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 0c 04 d8 1a 69 53 5c 10 5d 1b 02 18 43 |
08:50:03.386 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.386 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.426 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.426 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.441 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:03.463 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:03.464 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:03.486 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.487 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.509 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:03.509 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 18 10 bd 43 68 00 69 c9 1a 40 18 70 47 |
08:50:03.553 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.553 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.567 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:03.591 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:03.591 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:03.613 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.614 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.645 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:03.645 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 24 42 68 03 00 89 1a c2 68 00 20 01 3a |
08:50:03.690 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.690 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.703 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:03.727 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:03.727 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:03.745 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:03.745 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 8a 42 01 d3 1b 69 58 5c 70 47 42 68 |
08:50:03.753 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.753 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.790 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.790 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.804 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:03.828 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:03.828 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:03.850 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.851 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.887 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:03.888 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 3c 10 b5 89 1a c2 68 4c 1c 01 3a 03 00 |
08:50:03.933 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.933 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:03.947 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:03.970 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:03.970 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:03.972 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:03.972 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 48 00 20 94 42 04 d8 1a 69 53 5c 10 5d |
08:50:03.992 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:03.993 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.032 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.032 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.047 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:04.070 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:04.070 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:04.072 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:04.073 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 54 1b 02 18 43 10 bd 10 b5 06 4b 00 2a |
08:50:04.093 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.093 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.133 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.133 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.147 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:04.170 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:04.170 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:04.192 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.192 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.202 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:04.202 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 60 01 d1 98 47 10 bd bf f3 4f 8f bf f3 |
08:50:04.247 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.247 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.261 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:04.285 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:04.285 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:04.308 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.308 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.319 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:04.319 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 6c 6f 8f 72 b6 98 47 62 b6 f6 e7 c0 46 |
08:50:04.364 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.364 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.378 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:04.401 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:04.401 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:04.423 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.423 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.449 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:04.449 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 78 f1 1f ff 1f 32 23 30 b5 8b b0 00 93 |
08:50:04.494 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.494 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.508 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:04.532 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:04.532 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:04.541 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:04.541 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 84 03 09 01 93 05 00 0b 09 0c 00 01 22 |
08:50:04.554 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.554 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.594 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.594 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.608 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:04.631 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:04.631 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:04.633 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:04.633 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 90 68 46 05 a9 02 93 ff f7 e0 ff 05 9b |
08:50:04.653 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.653 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.693 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.693 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.707 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:04.730 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:04.730 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:04.732 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:04.732 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 9c db b2 05 93 00 2b 0f d1 fa 21 3b 33 |
08:50:04.753 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.753 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.792 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.793 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.807 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:04.830 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:04.830 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:04.832 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:04.832 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef a8 00 93 08 4b 89 00 18 68 01 95 02 94 |
08:50:04.852 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.852 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.892 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.892 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.906 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:04.929 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:04.930 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:04.936 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:04.936 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef b4 02 f0 26 fb 01 22 03 90 05 a9 68 46 |
08:50:04.953 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.953 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:04.993 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:04.993 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.007 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:05.030 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:05.030 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:05.037 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:05.037 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef c0 ff f7 cb ff 05 98 c0 b2 0b b0 30 bd |
08:50:05.054 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.054 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.095 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.095 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.108 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:05.132 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:05.132 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:05.140 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:05.141 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef cc dc 00 00 10 f0 b5 c3 17 1b 05 1b 0d |
08:50:05.156 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.156 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.194 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.194 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.208 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:05.232 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:05.232 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:05.233 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:05.234 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef d8 c3 18 04 00 0e 00 15 00 8b b0 1b 13 |
08:50:05.254 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.254 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.295 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.295 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.308 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:05.331 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:05.331 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:05.353 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:05.353 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef e4 bf f3 4f 8f bf f3 6f 8f 72 b6 32 22 |
08:50:05.357 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.357 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.398 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.398 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.412 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:05.435 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:05.435 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:05.437 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:05.437 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef f0 68 46 00 92 05 a9 00 22 01 93 02 93 |
08:50:05.458 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.458 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.497 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.498 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.512 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:05.535 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:05.535 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:05.540 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:05.540 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef fc ff f7 ad ff |
08:50:05.559 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.559 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.587 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.587 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.602 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:05.625 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:05.625 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:05.647 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.647 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.654 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:05.669 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4900 with 256 bytes and CRC32 0xB835DDBF |
08:50:05.673 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ee 00 01 00 49 00 00 bf dd 35 b8 |
08:50:05.714 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.714 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.728 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:05.752 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:05.752 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:05.753 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 35,9% |
08:50:05.753 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 00 05 9f ff b2 05 97 00 2f 04 d0 62 b6 |
08:50:05.773 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.773 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.813 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.813 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.827 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:05.851 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:05.851 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:05.873 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.873 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.874 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:05.875 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 0c 05 98 c0 b2 0b b0 f0 bd 33 23 fa 21 |
08:50:05.921 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.921 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:05.934 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:05.958 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:05.958 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:05.984 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:05.984 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.016 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:06.016 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 18 00 93 0d 4b 89 00 18 68 01 94 02 96 |
08:50:06.061 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.061 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.075 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:06.098 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:06.099 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:06.115 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:06.115 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 24 03 95 02 f0 ed fa 3a 00 04 90 05 a9 |
08:50:06.129 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.129 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.162 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.162 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.176 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:06.199 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:06.200 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:06.223 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.223 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.255 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:06.255 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 30 68 46 ff f7 92 ff 05 9a 00 2a e6 d1 |
08:50:06.299 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.299 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.313 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:06.336 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:06.337 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:06.358 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.358 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.375 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:06.375 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 3c 38 23 68 46 05 a9 00 93 01 94 02 96 |
08:50:06.419 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.419 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.433 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:06.463 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:06.463 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:06.473 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:06.473 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 48 03 95 ff f7 86 ff dc e7 dc 00 00 10 |
08:50:06.485 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.485 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.525 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.525 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.539 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:06.562 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:06.562 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:06.565 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:06.565 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 54 30 b5 0c 4d 8b b0 a8 68 00 28 11 d1 |
08:50:06.586 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.586 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.625 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.625 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.640 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:06.663 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:06.663 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:06.666 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:06.666 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 60 35 23 02 24 00 93 01 22 68 46 05 a9 |
08:50:06.686 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.686 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.726 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.726 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.740 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:06.764 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:06.764 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:06.787 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.787 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.801 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:06.801 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 6c 01 94 02 94 ff f7 73 ff 05 9b 07 2b |
08:50:06.845 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.846 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.860 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:06.883 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:06.883 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:06.906 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:06.906 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:06.929 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:06.966 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 78 02 d0 02 34 80 2c f2 d1 20 03 a8 60 |
08:50:07.010 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.011 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.025 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:07.048 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:07.048 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:07.070 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.070 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.081 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:07.081 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 84 0b b0 30 bd a0 02 00 10 f8 b5 04 00 |
08:50:07.126 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.126 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.140 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:07.165 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:07.165 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:07.187 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.188 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.196 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:07.196 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 90 ff f7 e0 ff 0c 4f c5 19 ff f7 dc ff |
08:50:07.241 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.241 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.256 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:07.279 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:07.279 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:07.282 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:07.282 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 9c c7 19 80 20 e6 69 40 01 31 00 02 f0 |
08:50:07.302 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.302 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.343 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.343 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.356 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:07.380 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:07.380 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:07.389 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:07.389 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef a8 ad fa 01 38 70 43 38 18 a8 42 01 d2 |
08:50:07.404 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.404 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.443 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.443 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.457 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:07.484 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:07.496 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:07.518 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.519 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.538 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:07.538 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef b4 00 20 f8 bd e3 68 c3 18 01 3b 1b 78 |
08:50:07.583 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.583 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.598 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:07.620 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:07.620 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:07.642 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.642 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.654 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:07.655 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef c0 ff 2b f8 d1 80 1b f3 e7 00 f0 ff ff |
08:50:07.699 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.699 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.713 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:07.736 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:07.736 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:07.758 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.758 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.762 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:07.762 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef cc 88 22 92 00 03 00 80 5c 00 28 0b d1 |
08:50:07.807 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.807 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.822 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:07.845 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:07.845 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:07.868 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.868 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.914 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:07.914 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef d8 09 12 ff 29 09 d8 5b 18 1b 7d db 43 |
08:50:07.959 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:07.959 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:07.973 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:08.002 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:08.002 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:08.024 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.024 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.073 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:08.074 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef e4 db b2 01 20 01 33 98 42 80 41 40 42 |
08:50:08.119 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.119 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.133 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:08.156 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:08.161 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:08.185 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:08.185 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef f0 70 47 01 23 5b 42 f6 e7 03 68 70 b5 |
08:50:08.202 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.202 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.242 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.243 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.256 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:08.279 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:08.279 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:08.285 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:08.285 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef fc 9b 68 04 00 |
08:50:08.301 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.301 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.329 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.329 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.344 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:08.367 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:08.367 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:08.379 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:08.381 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4A00 with 256 bytes and CRC32 0x3E609EE1 |
08:50:08.382 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ee 00 01 00 4a 00 00 e1 9e 60 3e |
08:50:08.392 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.392 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.425 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.426 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.440 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:08.463 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:08.468 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:08.469 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 37,2% |
08:50:08.487 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 00 15 00 98 47 00 28 04 d0 23 68 29 00 |
08:50:08.493 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.493 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.532 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.532 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.546 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:08.569 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:08.569 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:08.571 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:08.571 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 0c 20 00 9b 68 98 47 70 bd 03 68 70 b5 |
08:50:08.591 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.592 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.632 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.632 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.646 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:08.669 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:08.669 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:08.671 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:08.671 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 18 5b 68 0c 00 98 47 03 00 02 1e 00 d0 |
08:50:08.692 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.692 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.731 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.731 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.745 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:08.768 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:08.768 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:08.771 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:08.771 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 24 02 78 01 20 21 12 03 33 e4 b2 82 42 |
08:50:08.792 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.792 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.831 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.832 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.846 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:08.869 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:08.869 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:08.872 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:08.872 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 30 02 da 01 20 40 42 70 bd 1d 78 8d 42 |
08:50:08.892 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.893 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.932 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.932 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:08.947 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:08.970 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:08.970 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:08.981 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:08.981 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 3c 02 d1 5d 78 a5 42 f8 d0 01 30 02 33 |
08:50:08.993 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:08.993 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.033 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.033 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.047 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:09.071 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:09.071 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:09.074 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:09.074 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 48 f1 e7 43 68 10 b5 d8 6e 03 68 9b 6e |
08:50:09.095 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.095 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.135 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.135 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.149 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:09.173 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:09.173 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:09.202 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.202 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.222 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:09.222 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 54 98 47 10 bd 43 68 10 b5 d8 6e 03 68 |
08:50:09.268 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.268 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.281 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:09.304 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:09.304 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:09.324 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:09.324 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 60 04 69 9b 6d 98 47 00 78 20 18 10 bd |
08:50:09.339 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.339 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.374 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.374 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.388 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:09.412 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:09.412 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:09.427 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:09.427 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 6c 03 68 10 b5 5b 68 98 47 00 78 10 bd |
08:50:09.437 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.437 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.474 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.475 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.489 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:09.512 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:09.512 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:09.514 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:09.515 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 78 03 23 59 43 10 b5 89 b2 db 18 80 2a |
08:50:09.535 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.535 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.575 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.575 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.589 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:09.612 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:09.612 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:09.617 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:09.617 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 84 00 d1 04 3b 07 24 8c 40 8b 40 82 6a |
08:50:09.636 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.636 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.676 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.676 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.691 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:09.714 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:09.714 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:09.720 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:09.720 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 90 a2 43 82 62 82 6a 13 43 83 62 10 bd |
08:50:09.737 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.737 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.777 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.777 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.791 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:09.814 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:09.814 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:09.824 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:09.824 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 9c 80 23 01 38 5b 04 98 42 0d d2 c0 21 |
08:50:09.837 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.837 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.877 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.877 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.892 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:09.915 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:09.915 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:09.936 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:09.937 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:09.959 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:09.959 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef a8 06 4a 09 06 50 60 06 48 03 6a 1b 02 |
08:50:10.004 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.004 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.018 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:10.041 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:10.048 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:10.070 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.070 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.109 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:10.109 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef b4 1b 0a 0b 43 03 62 00 23 93 60 07 33 |
08:50:10.153 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.153 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.167 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:10.190 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:10.190 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:10.212 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.212 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.222 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:10.222 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef c0 13 60 70 47 10 e0 00 e0 00 ed 00 e0 |
08:50:10.267 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.267 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.281 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:10.304 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:10.304 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:10.317 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:10.326 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.326 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.326 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef cc 70 b5 0d 00 86 21 89 00 43 58 04 00 |
08:50:10.373 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.373 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.387 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:10.410 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:10.410 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:10.432 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.432 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.442 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:10.442 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef d8 00 2b 0d d1 02 00 15 30 14 32 ff 30 |
08:50:10.492 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.493 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.500 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:10.524 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:10.529 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:10.540 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:10.540 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef e4 13 78 66 58 db 43 db b2 9e 42 00 d2 |
08:50:10.551 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.552 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.591 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.591 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.605 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:10.628 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:10.629 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:10.631 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:10.631 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef f0 63 50 01 32 82 42 f5 d1 86 21 a0 68 |
08:50:10.652 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.652 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.692 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.692 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.706 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:10.729 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:10.729 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:10.752 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.753 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.788 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:10.788 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef fc 22 69 89 00 |
08:50:10.820 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.820 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.835 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:10.859 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:10.859 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:10.874 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:10.881 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.881 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.927 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4B00 with 256 bytes and CRC32 0xC8FA1095 |
08:50:10.936 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ee 00 01 00 4b 00 00 95 10 fa c8 |
08:50:10.977 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:10.977 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:10.992 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:11.015 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:11.015 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:11.016 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 38,5% |
08:50:11.016 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 00 82 18 63 58 01 3a 93 42 16 d0 00 2b |
08:50:11.036 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.036 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.076 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.076 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.090 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:11.114 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:11.114 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:11.130 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:11.130 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 0c 11 d1 43 1c 85 26 20 00 80 22 b6 00 |
08:50:11.138 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.138 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.175 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.176 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.189 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:11.212 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:11.212 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:11.226 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:11.226 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 18 15 30 a3 51 00 21 ff 30 52 00 02 f0 |
08:50:11.237 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.237 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.276 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.276 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.291 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:11.313 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:11.313 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:11.336 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:11.336 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 24 6f fb a3 59 00 20 db 43 65 19 2b 75 |
08:50:11.336 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.336 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.380 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.381 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.395 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:11.418 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:11.418 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:11.420 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:11.420 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 30 70 bd 01 33 63 50 eb e7 04 20 40 42 |
08:50:11.440 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.440 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.480 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.480 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.494 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:11.518 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:11.518 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:11.521 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:11.521 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 3c f8 e7 10 b5 04 00 43 1d da 7f 00 2a |
08:50:11.541 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.541 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.584 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.584 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.594 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:11.618 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:11.625 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:11.627 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:11.627 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 48 fc d1 01 32 da 77 0f 23 e1 69 a0 69 |
08:50:11.649 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.649 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.687 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.687 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.702 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:11.724 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:11.725 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:11.731 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:11.731 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 54 4a 79 1a 40 07 32 02 f0 86 fb 20 00 |
08:50:11.748 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.748 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.788 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.788 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.802 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:11.825 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:11.825 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:11.830 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:11.830 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 60 ff f7 ec fc 10 bd 70 b5 03 79 04 00 |
08:50:11.852 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.852 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.889 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.889 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.903 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:11.927 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:11.926 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:11.935 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:11.935 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 6c 00 2b 39 d0 43 79 00 2b 36 d0 1d 4d |
08:50:11.948 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.948 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:11.988 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:11.988 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.002 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:12.026 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:12.029 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:12.034 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:12.034 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 78 c2 68 2b 68 9b 1a 1c 4a 93 42 01 d9 |
08:50:12.051 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.051 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.091 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.091 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.106 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:12.129 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:12.129 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:12.131 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:12.131 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 84 ff f7 f3 fd 63 79 01 2b 13 d1 a3 1d |
08:50:12.151 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.152 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.191 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.192 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.205 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:12.230 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:12.230 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:12.231 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:12.231 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 90 da 7f 02 2a 26 d1 da 7f d1 b2 02 2a |
08:50:12.252 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.252 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.292 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.292 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.305 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:12.328 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:12.329 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:12.346 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:12.347 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 9c 22 d1 01 32 61 71 20 00 da 77 ff f7 |
08:50:12.356 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.356 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.392 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.392 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.406 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:12.429 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:12.429 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:12.441 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:12.441 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef a8 ca ff 00 23 a3 72 2b 68 23 61 2b 68 |
08:50:12.454 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.454 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.492 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.493 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.507 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:12.530 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:12.530 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:12.554 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.554 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.577 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.5->6/2/4 L_Data.ind, low priority hop count 6, tpdu 00 80 6d |
08:50:12.615 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:12.615 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef b4 e3 60 63 79 02 2b 13 d1 22 69 2b 68 |
08:50:12.660 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.660 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.674 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:12.697 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:12.697 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:12.700 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:12.700 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef c0 9b 1a 0c 4a 93 42 0d d9 0a 23 e3 56 |
08:50:12.720 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.720 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.762 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.762 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.775 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:12.798 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:12.798 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:12.800 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:12.800 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef cc 20 00 02 2b 09 dc ff f7 b4 ff a3 7a |
08:50:12.821 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.821 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.861 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.861 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.876 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:12.898 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:12.899 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:12.922 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:12.922 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:12.985 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:12.986 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef d8 01 33 a3 72 2b 68 23 61 2b 68 e3 60 |
08:50:13.031 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.032 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.046 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:13.069 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:13.077 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:13.099 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.099 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.094 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:13.107 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef e4 70 bd ff f7 c2 fd fb e7 a0 02 00 10 |
08:50:13.151 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.151 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.165 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:13.190 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:13.190 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:13.213 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.213 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.246 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:13.246 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef f0 6f 17 00 00 b7 0b 00 00 f7 b5 1f 00 |
08:50:13.290 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.290 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.305 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:13.329 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:13.329 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:13.348 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:13.348 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef fc 03 68 0d 00 |
08:50:13.352 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.352 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.381 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.381 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.395 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:13.419 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:13.419 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:13.422 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:13.441 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.441 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.461 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4C00 with 256 bytes and CRC32 0x1E697E18 |
08:50:13.496 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ee 00 01 00 4c 00 00 18 7e 69 1e |
08:50:13.535 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.535 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.550 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:13.573 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:13.573 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:13.575 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 39,8% |
08:50:13.577 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 00 db 69 04 00 16 00 98 47 a8 42 04 d1 |
08:50:13.596 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.596 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.637 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.637 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.650 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:13.673 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:13.673 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:13.685 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:13.685 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 0c 01 2f 02 d1 33 78 23 75 f7 bd 63 68 |
08:50:13.697 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.697 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.735 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.735 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.749 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:13.773 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:13.773 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:13.794 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:13.794 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.794 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.794 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 18 20 00 ed 1a 23 68 db 69 98 47 a8 42 |
08:50:13.840 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.840 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.854 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:13.878 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:13.878 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:13.900 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:13.901 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:13.965 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:13.965 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 24 08 d3 7b 19 01 93 23 68 20 00 db 69 |
08:50:14.010 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.010 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.025 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:14.048 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:14.048 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:14.061 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:14.061 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 30 98 47 7b 19 83 42 10 d2 20 69 3a 00 |
08:50:14.071 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.071 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.111 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.111 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.124 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:14.148 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:14.148 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:14.170 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.170 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.200 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:14.200 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 3c 31 00 40 19 02 f0 13 fb e6 e7 23 68 |
08:50:14.244 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.244 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.259 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:14.283 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:14.288 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:14.289 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:14.290 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 48 20 00 db 69 98 47 33 78 a8 42 06 d1 |
08:50:14.310 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.310 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.350 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.351 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.364 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:14.388 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:14.388 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:14.389 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:14.389 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 54 23 75 01 36 01 35 01 9b ab 42 f2 d1 |
08:50:14.409 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.409 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.449 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.449 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.464 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:14.487 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:14.487 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:14.489 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:14.489 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 60 d8 e7 22 69 53 55 f6 e7 f0 b5 85 b0 |
08:50:14.509 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.509 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.549 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.549 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.563 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:14.587 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:14.587 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:14.608 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:14.608 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 6c 01 93 03 68 0e 00 db 69 04 00 17 00 |
08:50:14.610 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.610 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.654 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.654 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.668 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:14.691 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:14.691 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:14.714 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.714 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.727 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:14.727 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 78 98 47 b0 42 06 d1 01 9b 01 2b 03 d1 |
08:50:14.771 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.772 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.787 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:14.810 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:14.810 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:14.814 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:14.815 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 84 23 7d 3b 70 05 b0 f0 bd 63 68 20 00 |
08:50:14.831 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.831 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.871 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.871 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.886 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:14.909 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:14.909 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:14.918 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:14.918 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 90 f5 1a 03 93 23 68 db 69 98 47 a8 42 |
08:50:14.931 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.931 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.971 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:14.971 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:14.985 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:15.009 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:15.009 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:15.011 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:15.012 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 9c 09 d3 01 9b 20 00 5b 19 02 93 23 68 |
08:50:15.031 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.033 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.071 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.072 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.086 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:15.109 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:15.109 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:15.111 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:15.111 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef a8 db 69 98 47 02 9b 83 42 12 d2 21 69 |
08:50:15.131 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.131 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.171 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.171 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.185 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:15.208 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:15.208 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:15.211 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:15.211 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef b4 38 00 01 9a 49 19 02 f0 d6 fa e3 e7 |
08:50:15.231 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.231 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.270 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.270 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.286 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:15.308 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:15.310 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:15.320 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:15.320 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef c0 23 68 20 00 db 69 98 47 a8 42 09 d1 |
08:50:15.333 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.333 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.372 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.372 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.386 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:15.410 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:15.410 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:15.424 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:15.424 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef cc 22 7d 03 9b 9b 1b fb 18 5a 55 01 35 |
08:50:15.434 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.435 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.471 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.472 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.486 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:15.509 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:15.509 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:15.511 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:15.511 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef d8 02 9b ab 42 f0 d1 d3 e7 23 69 5a 5d |
08:50:15.531 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.532 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.572 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.572 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.585 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:15.609 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:15.608 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:15.613 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:15.613 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef e4 f3 e7 f0 b5 89 b0 06 00 0c 00 1d 00 |
08:50:15.632 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.632 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.672 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.672 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.686 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:15.709 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:15.709 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:15.730 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:15.730 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef f0 18 1e 06 92 51 d0 4b 1e 5b 19 00 20 |
08:50:15.731 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.731 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.775 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.775 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.789 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:15.821 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:15.822 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:15.827 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:15.827 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef fc 04 93 99 42 |
08:50:15.844 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.844 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.872 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.872 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.887 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:15.910 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:15.910 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:15.923 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:15.932 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:15.932 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:15.955 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4D00 with 256 bytes and CRC32 0x3E813258 |
08:50:16.002 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ee 00 01 00 4d 00 00 58 32 81 3e |
08:50:16.042 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.042 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.057 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:16.081 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:16.081 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:16.081 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 41,2% |
08:50:16.081 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 00 4b d8 70 6d 00 28 0c d0 03 68 21 00 |
08:50:16.101 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.101 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.141 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.142 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.156 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:16.179 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:16.179 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:16.182 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:16.182 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 0c 9b 68 98 47 05 90 70 6d 04 99 03 68 |
08:50:16.201 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.201 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.241 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.241 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.255 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:16.279 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:16.279 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:16.304 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.304 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.316 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:16.316 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 18 9b 68 98 47 05 9b 00 2b 1d d1 06 9b |
08:50:16.361 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.362 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.375 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:16.398 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:16.398 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:16.420 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.420 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.425 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:16.425 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 24 03 93 01 23 05 93 30 6d 21 00 03 68 |
08:50:16.469 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.469 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.484 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:16.507 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:16.507 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:16.526 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:16.527 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 30 04 9a 1b 69 98 47 00 28 64 d0 21 00 |
08:50:16.530 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.530 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.572 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.572 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.586 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:16.608 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:16.608 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:16.610 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:16.610 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 3c 30 00 04 9d ff f7 6e fa 0e 9b 01 35 |
08:50:16.630 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.630 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.670 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.670 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.684 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:16.708 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:16.708 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:16.731 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.731 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.772 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:16.772 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 48 1b 78 2d 1b 2a 00 00 2b 4d d0 01 00 |
08:50:16.817 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.817 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.831 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:16.854 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:16.854 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:16.861 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:16.861 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 54 03 98 02 f0 88 fa 01 20 1d e0 00 28 |
08:50:16.877 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.877 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.917 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.917 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.931 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:16.955 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:16.954 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:16.977 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:16.978 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:16.988 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:16.988 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 60 0b d1 27 00 2b 19 07 93 06 9b 1b 1b |
08:50:17.032 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.032 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.047 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:17.070 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:17.070 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:17.093 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.093 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.094 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:17.095 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 6c db 19 03 93 07 9b bb 42 19 d1 1c 00 |
08:50:17.140 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.141 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.162 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:17.178 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:17.178 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:17.200 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.200 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.220 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:17.220 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 78 d7 e7 0e 9a 70 6d 12 78 03 68 00 2a |
08:50:17.265 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.265 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.279 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:17.302 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:17.302 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:17.319 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:17.319 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 84 0b d0 00 22 00 92 5e 68 21 00 2b 00 |
08:50:17.328 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.328 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.365 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.365 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.380 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:17.403 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:17.403 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:17.426 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.426 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.436 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:17.436 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 90 06 9a b0 47 43 42 58 41 c0 b2 09 b0 |
08:50:17.480 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.480 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.495 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:17.518 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:17.518 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:17.529 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:17.529 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 9c f0 bd 1e 68 21 00 2b 00 06 9a b0 47 |
08:50:17.544 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.544 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.583 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.583 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.598 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:17.621 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:17.621 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:17.623 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:17.623 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef a8 f4 e7 70 6d 39 00 03 68 9b 68 98 47 |
08:50:17.645 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.646 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.682 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.682 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.697 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:17.720 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:17.720 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:17.722 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:17.722 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef b4 00 28 0e d0 0e 9a 70 6d 12 78 03 68 |
08:50:17.742 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.742 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.781 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.782 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.796 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:17.820 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:17.820 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:17.823 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:17.823 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef c0 00 2a 0e d0 00 22 00 92 5d 68 39 00 |
08:50:17.844 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.844 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.884 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.884 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.898 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:17.921 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:17.921 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:17.924 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:17.924 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef cc 01 23 03 9a a8 47 00 28 01 d0 3c 00 |
08:50:17.944 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.944 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.984 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:17.984 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:17.998 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:18.021 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:18.021 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:18.023 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:18.023 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef d8 a7 e7 00 23 01 37 05 93 c2 e7 1d 68 |
08:50:18.043 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.043 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.083 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 78 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.083 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.098 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:18.121 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:18.121 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:18.127 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:18.127 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef e4 39 00 01 23 03 9a a8 47 f1 e7 03 99 |
08:50:18.143 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.143 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.183 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.183 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.197 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:18.220 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:18.220 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:18.231 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:18.231 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef f0 02 f0 3b fa 01 23 32 6d 13 75 43 4b |
08:50:18.242 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.242 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.283 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.283 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.297 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:18.320 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:18.320 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:18.331 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:18.331 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef fc 1b 68 32 33 |
08:50:18.342 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.342 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.370 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.370 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.385 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:18.409 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:18.409 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:18.413 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:18.425 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4E00 with 256 bytes and CRC32 0x64214B2F |
08:50:18.425 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ee 00 01 00 4e 00 00 2f 4b 21 64 |
08:50:18.435 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.435 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.466 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.466 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.481 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:18.504 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:18.504 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:18.506 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 42,5% |
08:50:18.506 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 00 93 61 aa e7 30 6d 21 00 03 68 db 68 |
08:50:18.527 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.527 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.566 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.566 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.580 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:18.603 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:18.603 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:18.625 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.626 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.627 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:18.627 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 0c 98 47 00 28 16 d0 33 6d 21 00 30 00 |
08:50:18.672 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.673 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.687 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:18.710 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:18.715 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:18.737 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.738 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.741 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:18.741 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 18 9d 68 ff f7 01 fa 0e 9b 01 35 1b 78 |
08:50:18.785 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.786 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.800 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:18.823 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:18.823 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:18.847 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.847 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.848 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:18.848 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 24 2f 1b 3a 00 00 2b 1e d0 01 00 03 98 |
08:50:18.895 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.895 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.909 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:18.932 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:18.932 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:18.955 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:18.955 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:18.956 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:18.956 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 30 02 f0 1b fa 03 9b 2c 00 db 19 03 93 |
08:50:19.001 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.001 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.015 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:19.040 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:19.040 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:19.063 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.063 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.131 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:19.131 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 3c 00 23 05 93 70 6b 21 00 03 68 04 9a |
08:50:19.176 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 118 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.176 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.190 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:19.213 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:19.218 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:19.240 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.240 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.249 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:19.249 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 48 1b 69 98 47 00 28 17 d0 0e 9a 04 9b |
08:50:19.294 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 122 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.295 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.308 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:19.346 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:19.346 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:19.368 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.368 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.369 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:19.369 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 54 12 78 01 33 70 6b 1b 1b 00 2a 3d d1 |
08:50:19.414 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 126 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.414 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.428 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:19.452 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:19.452 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:19.474 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.474 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.517 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:19.517 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 60 21 00 03 9a ff f7 c8 fe 77 e7 03 99 |
08:50:19.561 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 130 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.561 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.576 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:19.599 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:19.599 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:19.620 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.620 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.627 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:19.627 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 6c 02 f0 fd f9 01 23 32 6d 13 75 24 4b |
08:50:19.673 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 134 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.673 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.686 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:19.709 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:19.709 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:19.732 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.732 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.758 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:19.758 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 78 1b 68 32 33 93 61 d9 e7 70 6b 03 68 |
08:50:19.802 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 138 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.802 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.817 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:19.840 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:19.840 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:19.865 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.865 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.876 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:19.876 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 84 db 69 98 47 84 42 06 d1 70 6b 03 68 |
08:50:19.921 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 142 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.921 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:19.937 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:19.959 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:19.959 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:19.962 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:19.962 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 90 db 69 98 47 04 9b 83 42 da d0 70 6b |
08:50:19.983 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:19.983 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.024 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 146 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.024 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.038 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:20.060 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:20.060 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:20.084 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.084 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.113 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:20.113 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 9c 21 00 03 68 db 68 98 47 00 28 24 d0 |
08:50:20.157 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 150 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.157 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.171 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:20.195 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:20.195 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:20.204 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:20.204 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef a8 70 6b 85 68 6b 1c 05 93 1f 1b 0e 9b |
08:50:20.217 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.217 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.258 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 154 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.258 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.271 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:20.294 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:20.294 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:20.315 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:20.315 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef b4 1b 78 00 2b 15 d0 3b 00 21 00 03 9a |
08:50:20.316 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.316 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.360 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 158 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.360 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.374 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:20.398 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:20.398 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:20.421 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.421 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.422 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:20.422 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef c0 ff f7 d2 fe 03 9b 05 9c db 19 03 93 |
08:50:20.468 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 162 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.468 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.483 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:20.505 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:20.506 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:20.517 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:20.517 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef cc 04 9b 5d 1b 04 9b a3 42 13 d3 03 9b |
08:50:20.529 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.529 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.569 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 166 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.569 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.583 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:20.606 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:20.607 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:20.611 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:20.611 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef d8 06 93 12 e7 21 00 03 9a ff f7 c2 fe |
08:50:20.629 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.631 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.669 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 170 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.669 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.683 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:20.707 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:20.707 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:20.709 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:20.710 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef e4 39 e7 3b 00 21 00 03 9a ff f7 84 fe |
08:50:20.734 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.734 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.770 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.770 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.785 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:20.807 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:20.807 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:20.812 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:20.812 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef f0 e8 e7 04 9b 5d 1c 05 9b 2d 1b 00 2b |
08:50:20.829 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.829 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.869 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 178 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.869 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.883 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:20.908 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:20.908 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:20.908 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:20.909 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef fc e8 d0 6b 42 |
08:50:20.929 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.929 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.957 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:20.957 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:20.972 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:20.997 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:20.997 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:20.997 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:20.998 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x4F00 with 256 bytes and CRC32 0x054FDB31 |
08:50:20.998 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ee 00 01 00 4f 00 00 31 db 4f 05 |
08:50:21.017 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.017 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.053 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.053 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.067 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:21.092 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:21.092 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:21.093 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 43,8% |
08:50:21.094 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 00 5d 41 e8 b2 49 e7 c0 46 a0 02 00 10 |
08:50:21.115 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.115 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.154 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.154 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.169 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:21.191 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:21.191 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:21.200 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:21.200 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 0c 30 b5 0f 24 00 25 85 b0 6c 44 25 70 |
08:50:21.216 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.216 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.255 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.255 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.268 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:21.292 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:21.292 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:21.294 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:21.294 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 18 00 94 ff f7 e4 fe 05 b0 30 bd 30 b5 |
08:50:21.314 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.314 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.353 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.354 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.369 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:21.391 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:21.391 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:21.401 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:21.401 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 24 0f 24 01 25 85 b0 6c 44 25 70 00 94 |
08:50:21.414 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.414 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.453 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.454 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.467 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:21.490 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:21.493 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:21.509 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:21.515 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 30 ff f7 d9 fe 05 b0 30 bd f7 b5 01 93 |
08:50:21.516 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.517 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.560 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.560 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.575 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:21.597 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:21.597 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:21.599 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:21.599 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 3c 03 68 04 00 db 68 00 6d 00 93 03 68 |
08:50:21.619 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.619 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.659 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.659 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.680 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:21.696 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:21.696 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:21.714 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:21.714 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 48 15 00 db 6e 0e 00 98 47 07 78 20 6d |
08:50:21.723 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.723 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.760 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.760 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.774 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:21.798 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:21.798 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:21.801 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:21.801 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 54 3f 02 03 68 db 6e 98 47 41 78 00 9b |
08:50:21.822 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.822 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.862 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.862 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.876 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:21.901 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:21.901 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:21.922 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.922 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.923 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:21.923 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 60 39 43 20 00 98 47 2e 22 63 6b 00 27 |
08:50:21.969 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:21.969 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:21.984 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:22.011 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:22.011 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:22.033 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.033 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.048 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:22.048 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 6c 1a 75 60 6b 03 68 5b 69 98 47 01 22 |
08:50:22.092 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.092 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.107 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:22.130 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:22.130 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:22.153 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.153 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.162 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:22.162 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 78 07 70 63 6b 5a 75 20 6d 03 68 9b 6c |
08:50:22.206 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.206 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.229 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:22.244 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:22.244 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:22.247 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:22.247 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 84 98 47 ff 23 03 70 20 6d 03 68 5b 6c |
08:50:22.268 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.268 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.308 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.308 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.322 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:22.345 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:22.346 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:22.369 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.369 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.419 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:22.419 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 90 98 47 07 70 20 6d 03 68 1b 6a 98 47 |
08:50:22.464 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 238 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.464 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.478 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:22.501 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:22.501 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:22.525 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.525 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.539 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:22.539 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 9c 33 12 03 70 20 6d 03 68 5b 6a 98 47 |
08:50:22.584 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 242 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.586 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.599 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:22.622 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:22.622 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:22.639 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:22.639 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef a8 06 70 20 6d 03 68 9b 6a 98 47 2b 12 |
08:50:22.649 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.649 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.685 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 246 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.685 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.699 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:22.723 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:22.723 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:22.746 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.746 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.751 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:22.751 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef b4 03 70 20 6d 03 68 db 6a 98 47 05 70 |
08:50:22.795 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 250 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.795 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.809 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:22.833 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:22.833 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:22.855 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.856 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.855 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:22.856 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef c0 20 6d 03 68 1b 6b 98 47 01 9b 03 70 |
08:50:22.900 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 254 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.900 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:22.915 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:22.938 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:22.938 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:22.960 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:22.960 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.006 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:23.006 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef cc 23 6d 1f 75 9f 61 f7 bd f0 b5 43 06 |
08:50:23.050 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 2 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.050 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.064 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:23.088 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:23.088 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:23.111 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.111 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.111 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:23.111 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef d8 85 b0 9b 0f 01 93 86 4b 01 26 03 93 |
08:50:23.157 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 6 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.157 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.171 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:23.194 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:23.194 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:23.217 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.217 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.223 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:23.223 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef e4 01 9b 03 9a 9b 00 9c 58 1f 23 9c 46 |
08:50:23.267 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 10 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.267 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.281 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:23.304 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:23.305 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:23.326 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.326 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.374 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:23.374 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef f0 03 40 02 93 0f 05 02 9a f0 25 3b 0d |
08:50:23.419 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 14 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.419 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.433 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:23.456 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:23.456 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:23.475 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:23.476 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef fc 96 40 00 93 |
08:50:23.481 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.482 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.508 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 18 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.508 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.523 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:23.546 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:23.546 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:23.569 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.569 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.582 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:23.588 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x5000 with 256 bytes and CRC32 0x15D06BE8 |
08:50:23.588 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ee 00 01 00 50 00 00 e8 6b d0 15 |
08:50:23.628 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 22 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.628 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.643 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:23.666 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:23.666 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:23.668 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 45,2% |
08:50:23.668 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 00 80 22 63 46 67 46 2d 02 0d 40 89 14 |
08:50:23.688 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.689 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.728 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 26 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.728 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.742 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:23.766 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:23.766 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:23.789 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.789 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.795 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:23.795 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 0c 0b 40 b6 b2 12 02 39 42 0e d1 c0 21 |
08:50:23.839 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.839 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.853 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:23.877 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:23.877 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:23.879 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:23.879 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 18 01 23 c9 01 8d 42 19 d1 a1 58 31 43 |
08:50:23.898 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.898 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.938 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.938 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:23.954 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:23.976 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:23.976 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:23.987 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:23.987 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 24 a1 50 c2 05 1f d5 80 22 00 99 11 43 |
08:50:23.999 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:23.999 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.038 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 38 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.038 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.053 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:24.076 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:24.076 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:24.078 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:24.078 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 30 00 91 1a e0 c0 21 c9 01 8d 42 0b d1 |
08:50:24.098 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.098 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.138 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 42 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.138 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.152 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:24.175 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:24.175 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:24.178 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:24.178 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 3c a1 58 31 43 a1 50 0c 2b 00 d0 7e e0 |
08:50:24.197 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.197 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.238 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 46 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.238 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.253 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:24.275 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:24.275 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:24.290 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:24.290 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 48 6c 4a 90 42 69 d1 6c 4b 00 22 85 e0 |
08:50:24.302 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.302 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.338 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 50 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.338 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.352 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:24.375 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:24.375 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:24.378 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:24.378 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 54 e0 21 c9 01 8d 42 0f d1 a3 58 33 43 |
08:50:24.397 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.397 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.438 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 54 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.438 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.451 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:24.481 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:24.481 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:24.489 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:24.489 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 60 a3 50 c3 05 00 d5 bb e0 06 23 42 12 |
08:50:24.506 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.506 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.545 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 58 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.545 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.559 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:24.582 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:24.582 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:24.597 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:24.598 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 6c 1f 21 14 00 0c 40 a3 42 00 d0 b9 e0 |
08:50:24.606 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.607 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.644 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 62 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.644 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.658 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:24.681 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:24.681 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:24.704 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.704 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.705 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:24.705 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 78 00 22 2d e0 a1 58 b1 43 a1 50 80 22 |
08:50:24.751 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 66 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.751 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.765 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:24.788 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:24.788 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:24.811 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.811 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.813 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:24.813 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 84 92 01 95 42 37 d1 5e 4b 98 42 09 d1 |
08:50:24.859 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 70 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.859 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.873 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:24.896 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:24.896 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:24.914 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:24.915 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 90 00 22 5d 4b 1a 60 07 23 5c 4a 51 04 |
08:50:24.921 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.921 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.960 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 74 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:24.960 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:24.974 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:24.998 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:24.998 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:25.021 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.021 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.083 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.132->1/2/81 L_Data.ind, low priority hop count 6, tpdu 00 80 19 08 |
08:50:25.095 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:25.095 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 9c c9 0e 8b 42 4b d1 5e e0 5a 4b 98 42 |
08:50:25.139 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 79 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.139 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.154 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:25.177 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:25.177 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:25.178 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:25.178 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef a8 05 d1 01 22 56 4b 1a 60 07 23 58 4a |
08:50:25.200 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 82 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.200 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.239 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 83 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.239 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.253 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:25.276 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:25.277 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:25.300 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 86 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.300 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.309 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:25.309 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef b4 f1 e7 58 4b 98 42 05 d1 00 22 57 4b |
08:50:25.353 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 87 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.353 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.367 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:25.392 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:25.392 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:25.415 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 90 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.415 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.478 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:25.478 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef c0 1a 60 07 23 56 4a e8 e7 56 4b 98 42 |
08:50:25.526 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 91 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.526 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.536 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:25.560 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:25.560 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:25.583 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:25.583 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef cc 00 d0 6a e0 52 4b 01 22 1a 60 01 22 |
08:50:25.583 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 94 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.583 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.627 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 95 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.627 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.641 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:25.665 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:25.665 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:25.687 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 98 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.687 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.704 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:25.704 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef d8 0c 23 01 99 4b 43 02 99 5b 18 03 99 |
08:50:25.747 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 99 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.747 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.762 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:25.785 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:25.785 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:25.807 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 102 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.807 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.816 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:25.816 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef e4 5b 00 cb 18 1b 8c 4f 49 5b 18 00 99 |
08:50:25.861 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 103 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.861 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.877 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:25.898 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:25.898 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:25.920 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 106 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:25.920 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:25.966 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:25.967 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef f0 9b 00 0a 43 1a 60 05 b0 f0 bd c0 22 |
08:50:26.012 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 107 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.012 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.026 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:26.049 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:26.049 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:26.071 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 110 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.071 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.080 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:26.081 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef fc 92 01 95 42 |
08:50:26.113 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 111 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.113 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.128 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:26.151 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:26.151 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:26.173 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 114 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.173 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.196 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->0/1/0 L_Data.ind, low priority hop count 6, tpdu 00 81 |
08:50:26.228 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:26.269 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x5100 with 256 bytes and CRC32 0x1A04FB00 |
08:50:26.274 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ee 00 01 00 51 00 00 00 fb 04 1a |
08:50:26.314 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.314 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.328 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:26.352 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:26.352 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:26.355 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 46,5% |
08:50:26.374 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 00 72 d0 0f 2b 9d d1 00 22 48 49 94 00 |
08:50:26.377 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 119 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.377 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.419 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.420 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.433 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:26.456 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:26.456 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:26.479 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 123 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.479 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.503 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:26.504 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 0c 64 58 a0 42 02 d1 47 49 0a 60 86 e7 |
08:50:26.551 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.552 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.562 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:26.585 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:26.585 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:26.607 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 127 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.608 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.618 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:26.619 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 18 01 32 04 2a f5 d1 00 f0 ad fa 44 4a |
08:50:26.665 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.665 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.677 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:26.701 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:26.701 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:26.715 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:26.715 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 24 90 42 00 d0 7d e7 01 21 34 4a 11 60 |
08:50:26.726 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 131 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.726 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.762 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.762 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.777 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:26.800 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:26.800 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:26.802 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:26.802 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 30 80 22 00 99 11 43 40 4a 00 91 12 03 |
08:50:26.824 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 135 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.824 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.863 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.863 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.878 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:26.901 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:26.901 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:26.910 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:26.910 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 3c d2 0e 9a 42 ed d1 03 22 c8 e7 0d 2b |
08:50:26.923 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 139 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.923 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.963 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:26.963 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:26.977 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:27.001 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:27.002 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:27.005 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:27.005 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 48 0d d1 3c 4a 90 42 01 d1 3b 4b 7d e7 |
08:50:27.024 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 143 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.024 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.064 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.064 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.078 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:27.101 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:27.101 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:27.112 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:27.112 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 54 3b 4a 90 42 00 d0 64 e7 01 22 38 4b |
08:50:27.125 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 147 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.125 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.163 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.163 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.180 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:27.200 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:27.201 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:27.204 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:27.204 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 60 1a 60 02 22 b8 e7 0e 2b 21 d1 37 4a |
08:50:27.222 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 151 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.222 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.262 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.262 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.276 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:27.300 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:27.300 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:27.302 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:27.302 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 6c 90 42 01 d1 36 4b 6d e7 36 4a 90 42 |
08:50:27.326 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.5->6/5/2 L_Data.ind, low priority hop count 6, tpdu 00 80 0c a1 |
08:50:27.344 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.344 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.385 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.385 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.399 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:27.422 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:27.422 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:27.437 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:27.437 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 78 01 d1 34 4b a9 e7 35 4a 90 42 02 d1 |
08:50:27.449 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.449 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.485 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.485 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.499 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:27.523 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:27.523 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:27.531 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:27.531 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 84 02 22 31 4b ea e7 33 4a 90 42 01 d1 |
08:50:27.546 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.546 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.586 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.586 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.600 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:27.623 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:27.623 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:27.625 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:27.626 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 90 32 4b 5d e7 32 4a 90 42 00 d0 44 e7 |
08:50:27.646 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.646 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.685 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.686 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.700 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:27.723 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:27.723 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:27.735 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:27.735 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 9c 01 21 2f 4a 11 60 30 4a c9 e7 c3 05 |
08:50:27.747 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.747 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.787 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.787 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.801 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:27.824 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:27.824 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:27.828 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:27.828 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef a8 1c d4 07 23 5d e7 0b 2b 0f d1 12 4a |
08:50:27.846 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.846 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.886 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.886 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.900 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:27.923 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:27.923 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:27.945 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:27.945 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:27.964 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:27.965 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef b4 90 42 04 d1 00 21 2b 4a 91 61 2b 4a |
08:50:27.975 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 0c 38 |
08:50:28.011 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 182 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.011 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.026 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:28.052 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:28.052 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:28.079 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 14 92 |
08:50:28.097 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 186 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.097 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.134 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:28.135 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef c0 bb e7 2b 4a 90 42 00 d0 2d e7 01 22 |
08:50:28.179 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 187 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.179 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.194 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:28.218 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:28.218 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:28.241 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 190 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.241 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.265 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:28.265 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef cc 26 4b 9a 61 c7 e7 c2 05 00 d4 48 e7 |
08:50:28.309 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 191 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.310 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.324 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:28.348 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:28.348 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:28.370 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 194 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.370 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.379 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:28.379 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef d8 02 2b 00 d1 45 e7 24 e7 06 23 22 e7 |
08:50:28.423 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 195 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.423 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.437 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:28.461 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:28.461 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:28.477 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:28.477 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef e4 07 23 20 e7 02 23 3e e7 80 13 08 40 |
08:50:28.486 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 198 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.486 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.523 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 199 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.523 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.537 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:28.560 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:28.561 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:28.562 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:28.562 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef f0 98 42 00 d0 51 e7 6e e7 b8 77 00 00 |
08:50:28.583 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 202 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.583 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.622 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 203 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.623 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.637 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:28.660 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:28.660 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:28.676 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:28.676 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef fc 42 42 65 00 |
08:50:28.686 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 206 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.687 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.712 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 207 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.712 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.727 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:28.750 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:28.750 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:28.768 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:28.775 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 210 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.775 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.827 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x5200 with 256 bytes and CRC32 0xE7BBCFF2 |
08:50:28.864 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ee 00 01 00 52 00 00 f2 cf bb e7 |
08:50:28.904 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 211 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.904 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.918 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:28.942 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:28.942 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:28.964 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 214 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:28.964 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:28.945 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 47,8% |
08:50:28.976 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 c8 40 04 40 02 c2 3a 00 c0 40 04 40 |
08:50:29.021 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 215 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.021 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.036 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:29.059 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:29.059 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:29.074 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:29.074 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c 61 1d 00 00 63 82 3d 00 c1 1e 00 00 |
08:50:29.084 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 218 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.084 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.122 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 219 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.122 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.137 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:29.160 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:29.160 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:29.174 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:29.174 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 18 25 42 3c 00 d0 40 04 40 21 1e 00 00 |
08:50:29.185 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 222 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.185 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.222 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 223 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.222 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.236 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:29.259 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:29.259 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:29.281 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 226 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.281 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.293 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:29.293 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 24 49 c2 01 00 00 10 01 10 c8 77 00 00 |
08:50:29.338 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 227 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.339 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.364 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:29.376 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:29.376 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:29.399 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 230 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.399 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.402 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:29.402 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 30 d4 40 04 40 2a 83 30 0c 41 18 06 00 |
08:50:29.446 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 231 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.446 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.461 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:29.484 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:29.484 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:29.508 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 234 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.508 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.544 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:29.545 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 3c 43 82 6d 00 cc 40 04 40 29 82 69 00 |
08:50:29.571 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.1->4/1/5 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
08:50:29.609 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.610 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.624 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:29.647 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:29.647 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:29.653 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:29.653 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 48 0a 4a 70 06 b0 40 04 40 4b 82 3b 00 |
08:50:29.670 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 239 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.670 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.710 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.710 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.724 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:29.748 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:29.747 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:29.767 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:29.772 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 54 06 02 70 00 41 c2 74 00 c4 40 04 40 |
08:50:29.772 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 243 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.773 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.796 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.1->4/4/0 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
08:50:29.835 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.842 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.849 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:29.873 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:29.873 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:29.877 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:29.877 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 60 62 42 35 0e a1 1a 07 00 00 40 04 40 |
08:50:29.896 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.896 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.936 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.936 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:29.950 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:29.973 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:29.973 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:29.975 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:29.975 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 6c a1 32 00 00 44 82 59 00 f0 b5 04 00 |
08:50:29.996 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:29.996 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.035 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.035 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.050 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:30.073 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:30.073 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:30.076 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:30.076 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 78 85 b0 ff f7 74 fc a3 6a 1a 00 2c 32 |
08:50:30.096 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.096 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.136 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.136 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.150 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:30.174 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:30.174 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:30.192 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:30.192 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 84 99 68 10 78 01 28 02 d0 12 78 06 2a |
08:50:30.200 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.200 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.237 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.237 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.251 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:30.275 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:30.275 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:30.284 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:30.285 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 90 36 d1 da 6c 00 2a 33 d1 00 29 31 d0 |
08:50:30.298 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.298 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.339 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.339 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.352 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:30.376 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:30.375 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:30.394 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:30.396 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 9c 62 6b 12 7d 52 07 2d d5 c0 20 5d 68 |
08:50:30.402 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.402 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.441 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.441 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.455 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:30.478 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:30.478 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:30.480 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:30.480 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef a8 9b 68 2a 79 db b2 02 93 eb 78 12 02 |
08:50:30.500 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.500 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.541 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.541 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.554 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:30.578 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:30.578 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:30.581 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:30.581 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef b4 1a 43 ab 79 ee 79 19 02 80 00 01 40 |
08:50:30.602 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.602 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.641 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.642 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.657 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:30.679 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:30.679 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:30.682 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:30.682 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef c0 0e 43 f0 21 a0 27 89 00 31 40 bf 00 |
08:50:30.703 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.703 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.743 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 25 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.743 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.757 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:30.780 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:30.783 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:30.792 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:30.792 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef cc b9 42 09 d0 00 dd 6e e0 08 00 80 27 |
08:50:30.806 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 28 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.806 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.846 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 29 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.846 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.861 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:30.884 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:30.884 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:30.906 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 32 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.906 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.923 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:30.923 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef d8 81 38 ff 38 b8 43 80 b2 00 28 68 d1 |
08:50:30.967 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 33 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:30.968 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:30.982 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:31.005 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:31.005 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:31.030 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 36 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.030 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.044 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:31.044 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef e4 8e b2 00 2a 67 d1 23 68 2a 00 9f 69 |
08:50:31.090 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 37 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.090 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.104 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:31.132 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:31.132 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:31.134 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:31.134 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef f0 31 00 20 00 02 9b b8 47 23 68 20 00 |
08:50:31.154 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.154 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.195 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 41 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.195 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.209 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:31.232 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:31.233 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:31.256 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.256 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.266 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:31.266 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef fc 5b 6a 98 47 |
08:50:31.301 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 45 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.301 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.313 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:31.337 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:31.337 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:31.339 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:31.359 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 48 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.359 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.368 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x5300 with 256 bytes and CRC32 0xA7D3F8CA |
08:50:31.379 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ee 00 01 00 53 00 00 ca f8 d3 a7 |
08:50:31.419 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.419 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.433 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:31.457 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:31.457 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:31.458 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 49,1% |
08:50:31.459 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 00 e0 6a 00 28 3c d0 c1 49 ff f7 64 fe |
08:50:31.478 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.478 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.518 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.518 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.533 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:31.556 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:31.557 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:31.583 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.583 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.633 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:31.634 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 0c e2 6a c0 4d 53 06 9b 0f 9b 00 58 59 |
08:50:31.679 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.679 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.693 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:31.716 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:31.717 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:31.739 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.739 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.767 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:31.767 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 18 1f 23 1a 40 1b 3b 93 40 1a 58 a0 6c |
08:50:31.812 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.812 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.825 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:31.849 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:31.849 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:31.857 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:31.857 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 24 53 1e 9a 41 ba 4b 61 6c 1b 68 82 42 |
08:50:31.871 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.871 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.911 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.911 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:31.926 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:31.949 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:31.949 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:31.972 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:31.972 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.066 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:32.066 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 30 00 d1 84 e1 23 64 a2 64 63 6c 00 2b |
08:50:32.111 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.111 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.126 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:32.149 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:32.151 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:32.173 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.173 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.203 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:32.203 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 3c 06 d1 00 29 04 d0 62 6b 7f 3b 11 7d |
08:50:32.248 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.248 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.270 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:32.285 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:32.285 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:32.306 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:32.306 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 48 4b 40 13 75 c0 21 e0 6a c9 01 ff f7 |
08:50:32.307 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.307 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.351 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.351 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.365 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:32.389 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:32.389 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:32.396 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:32.396 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 54 3f fe 01 20 1f 23 01 00 e2 6a 13 40 |
08:50:32.411 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.411 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.451 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.451 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.465 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:32.489 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:32.489 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:32.498 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:32.498 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 60 99 40 63 6b 52 06 1b 7d 92 0f 03 40 |
08:50:32.511 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.511 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.551 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.551 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.565 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:32.589 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:32.589 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:32.612 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.612 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.644 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:32.645 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 6c 20 6b 92 00 1b 1a 58 1e 83 41 aa 58 |
08:50:32.689 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.689 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.704 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:32.727 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:32.727 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:32.747 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:32.747 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 78 5b 42 0b 40 89 00 8b 50 a3 6a db 6c |
08:50:32.748 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.748 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.792 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.792 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.806 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:32.829 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:32.829 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:32.852 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.852 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.865 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:32.867 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 84 00 2b 12 d1 22 00 4c 32 12 78 00 2a |
08:50:32.913 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.913 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.926 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:32.950 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:32.950 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:32.972 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:32.972 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:32.996 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:32.996 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 90 0d d0 62 79 00 2a 06 d0 e2 88 00 2a |
08:50:33.040 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.040 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.054 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:33.078 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:33.078 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:33.080 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:33.080 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 9c 03 d0 81 21 20 00 ff f7 c8 f9 23 68 |
08:50:33.100 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.100 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.139 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.140 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.154 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:33.177 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:33.177 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:33.181 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:33.181 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef a8 20 00 1b 6b 98 47 05 b0 f0 bd 81 42 |
08:50:33.199 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.199 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.239 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.239 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.253 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:33.276 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:33.276 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:33.287 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:33.287 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef b4 96 d0 b6 b2 95 e7 69 79 52 ba 92 b2 |
08:50:33.300 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.300 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.340 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.340 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.354 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:33.377 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:33.377 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:33.379 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:33.379 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef c0 7f 29 08 d9 02 99 23 68 00 91 5f 69 |
08:50:33.399 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.399 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.440 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.440 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.453 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:33.477 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:33.477 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:33.480 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:33.480 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef cc 31 00 2b 00 20 00 b8 47 90 e7 a1 8a |
08:50:33.499 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.499 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.539 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.539 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.554 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:33.577 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:33.577 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:33.578 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:33.579 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef d8 91 42 00 d0 8c e7 3c 22 18 00 90 43 |
08:50:33.599 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.599 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.640 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.640 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.653 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:33.676 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:33.676 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:33.678 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:33.678 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef e4 aa 78 69 78 12 02 0a 43 57 ba 42 b2 |
08:50:33.698 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.698 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.739 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.739 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.752 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:33.776 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:33.776 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:33.785 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:33.785 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef f0 b9 b2 00 2a 00 db 8f e0 80 28 16 d0 |
08:50:33.799 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.799 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.839 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.839 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.853 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:33.877 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:33.877 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:33.891 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:33.891 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef fc 81 28 3a d0 |
08:50:33.901 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.901 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.929 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.929 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:33.943 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:33.967 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:33.966 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:33.983 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:33.984 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x5400 with 256 bytes and CRC32 0x2FA59C27 |
08:50:33.984 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ee 00 01 00 54 00 00 27 9c a5 2f |
08:50:33.993 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:33.994 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.026 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.026 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.040 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:34.064 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:34.064 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:34.065 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 50,5% |
08:50:34.065 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 00 da 07 65 d4 62 79 01 2a 00 d8 75 e7 |
08:50:34.086 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.086 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.126 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.126 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.144 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:34.163 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:34.163 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:34.173 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:34.174 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 0c e2 88 8a 42 00 d0 71 e7 08 21 0f 20 |
08:50:34.187 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.187 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.226 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.226 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.240 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:34.264 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:34.264 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:34.274 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:34.274 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 18 61 56 9b 08 03 40 8b 42 3d d0 20 00 |
08:50:34.285 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.286 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.325 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.326 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.340 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:34.363 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:34.363 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:34.365 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:34.365 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 24 ff f7 a3 f9 66 e7 65 79 00 2d 12 d0 |
08:50:34.386 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.386 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.425 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.425 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.441 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:34.463 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:34.463 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:34.485 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.485 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.486 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:34.486 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 30 01 3d 01 2d 00 d9 5f e7 e3 88 8b 42 |
08:50:34.531 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.531 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.548 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:34.569 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:34.568 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:34.591 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.591 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.629 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:34.630 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 3c 00 d1 5b e7 74 4a 20 00 93 88 01 33 |
08:50:34.674 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.674 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.688 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:34.712 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:34.712 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:34.723 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:34.724 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 48 93 80 0a 00 00 23 81 21 ff f7 71 f9 |
08:50:34.735 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.735 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.774 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.774 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.788 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:34.811 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:34.812 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:34.813 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:34.813 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 54 50 e7 23 68 20 00 db 69 98 47 6d 4b |
08:50:34.834 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.834 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.873 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.874 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.888 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:34.911 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:34.912 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:34.934 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:34.934 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:34.966 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:34.966 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 60 e7 80 1b 68 25 81 e3 60 63 79 01 2b |
08:50:35.010 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.010 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.024 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:35.048 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:35.048 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:35.069 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.069 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.072 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:35.072 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 6c 00 d1 43 e7 01 23 63 71 40 e7 63 79 |
08:50:35.116 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.116 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.131 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:35.154 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:35.154 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:35.177 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.177 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.187 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:35.187 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 78 20 68 01 3b 01 2b 00 d9 3a e7 e3 88 |
08:50:35.232 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.232 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.247 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:35.270 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:35.270 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:35.293 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.293 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.313 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:35.314 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 84 8b 42 00 d0 36 e7 00 23 61 4a 63 71 |
08:50:35.358 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.358 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.372 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:35.395 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:35.395 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:35.417 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.417 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.448 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:35.448 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 90 93 88 01 33 93 80 c3 69 20 00 98 47 |
08:50:35.492 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.492 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.506 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:35.529 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:35.529 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:35.551 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.551 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.596 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:35.596 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 9c 2c e7 00 26 5c 4b 01 31 1b 68 01 40 |
08:50:35.641 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.641 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.655 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:35.679 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:35.679 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:35.693 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:35.693 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef a8 a7 1d 21 72 e3 60 e5 1d fe 77 eb 7f |
08:50:35.703 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.703 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.742 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.742 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.756 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:35.780 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:35.780 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:35.802 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.802 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.809 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:35.809 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef b4 b3 42 db d0 21 6a 4a 79 02 40 07 32 |
08:50:35.853 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.853 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.867 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:35.891 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:35.891 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:35.893 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:35.893 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef c0 e0 69 01 f0 d2 fe eb 7f db b2 fb 77 |
08:50:35.912 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.912 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.953 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:35.953 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:35.967 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:35.990 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:35.990 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:36.013 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.013 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.046 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:36.046 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef cc ee 77 cb e7 ff 2b 00 d1 10 e7 62 79 |
08:50:36.091 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.091 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.105 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:36.129 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:36.129 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:36.132 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:36.132 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef d8 00 2a 00 d1 0c e7 08 20 20 56 9b 06 |
08:50:36.151 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.151 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.191 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.191 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.205 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:36.228 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:36.228 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:36.250 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.250 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.268 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:36.268 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef e4 1b 0f 83 42 00 d0 05 e7 e3 88 8b 42 |
08:50:36.312 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.312 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.326 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:36.350 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:36.350 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:36.353 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:36.353 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef f0 00 d0 01 e7 0a 23 e3 56 20 00 02 2b |
08:50:36.373 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.374 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.413 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.413 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.427 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:36.451 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:36.451 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:36.460 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:36.460 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef fc 92 dc 02 2a |
08:50:36.476 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.476 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.503 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.503 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.516 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:36.540 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:36.540 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:36.542 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:36.542 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x5500 with 256 bytes and CRC32 0xBDE26B23 |
08:50:36.543 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ee 00 01 00 55 00 00 23 6b e2 bd |
08:50:36.566 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.566 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.598 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.598 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.612 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:36.636 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:36.636 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:36.637 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 51,8% |
08:50:36.637 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 00 90 d1 ff f7 1c fb a3 7a 01 33 a3 72 |
08:50:36.658 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.658 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.698 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.698 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.712 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:36.735 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:36.735 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:36.739 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:36.739 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 0c 41 4b 1a 68 1b 68 22 61 e3 60 ef e6 |
08:50:36.758 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.759 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.797 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.798 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.812 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:36.835 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:36.835 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:36.849 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:36.849 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 18 03 2b 21 d8 67 1d fb 7f 00 2b fc d1 |
08:50:36.859 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.859 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.897 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.897 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.912 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:36.935 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:36.935 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:36.937 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:36.937 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 24 0c 22 01 33 fb 77 28 78 a3 69 10 40 |
08:50:36.956 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.957 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:36.998 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:36.998 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.011 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:37.034 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:37.034 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:37.040 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:37.040 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 30 5c 3a 02 43 1a 70 0a 0a 19 71 da 70 |
08:50:37.057 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.058 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.098 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.098 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.112 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:37.135 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:37.135 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:37.147 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:37.150 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 3c 22 68 00 93 13 6a 31 00 9c 46 2a 00 |
08:50:37.160 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.160 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.198 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.199 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.217 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:37.236 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:37.236 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:37.259 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.259 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.309 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:37.309 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 48 20 00 65 46 02 9b a8 47 00 28 03 d0 |
08:50:37.353 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.353 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.368 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:37.391 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:37.391 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:37.413 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.413 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.539 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:37.539 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 54 20 00 fe f7 f1 ff cd e6 f8 77 cb e6 |
08:50:37.584 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.584 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.598 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:37.621 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:37.621 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:37.625 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:37.625 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 60 e2 88 8a 42 00 d0 c7 e6 61 79 00 29 |
08:50:37.643 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.643 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.683 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.683 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.701 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:37.720 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:37.720 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:37.739 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:37.739 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 6c 00 d1 c3 e6 9b 08 09 21 18 00 0f 27 |
08:50:37.746 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.746 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.786 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.786 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.799 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:37.822 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:37.822 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:37.846 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 20 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.846 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.856 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:37.856 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 78 61 56 38 40 03 00 88 42 4a d1 c2 21 |
08:50:37.901 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.901 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.915 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:37.939 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:37.939 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:37.962 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 24 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:37.962 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:37.990 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.1->4/1/22 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
08:50:38.003 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:38.003 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 84 20 00 ff f7 d6 f8 63 7a 01 33 3b 40 |
08:50:38.016 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.1->4/4/20 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
08:50:38.056 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 27 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.056 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.070 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:38.093 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:38.093 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:38.105 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:38.105 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 90 63 72 20 4b 1b 68 e3 60 a3 1d db 7f |
08:50:38.117 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 30 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.117 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.155 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 31 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.155 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.169 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:38.192 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:38.192 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:38.195 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:38.195 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 9c 00 2b 2d d1 23 00 e7 69 25 33 03 93 |
08:50:38.216 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 34 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.216 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.255 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 35 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.256 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.270 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:38.293 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:38.298 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:38.305 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:38.305 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef a8 01 23 03 9a 31 00 13 70 23 68 00 97 |
08:50:38.322 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.1->4/1/32 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
08:50:38.343 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 39 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.343 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.380 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 40 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.380 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.396 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:38.418 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:38.418 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:38.425 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:38.425 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef b4 1b 6a 2a 00 9c 46 20 00 66 46 02 9b |
08:50:38.439 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 43 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.440 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.479 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 44 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.480 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.494 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:38.517 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:38.517 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:38.540 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 47 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.540 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.566 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.1->4/4/30 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
08:50:38.572 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:38.573 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef c0 b0 47 00 28 1e d0 0c 23 2a 78 1a 40 |
08:50:38.618 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 49 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.618 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.632 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:38.655 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:38.655 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:38.677 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 52 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.677 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.739 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:38.739 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef cc 5c 3b 13 43 3b 70 e3 88 1a 0a 3b 71 |
08:50:38.783 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 53 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.783 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.797 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:38.821 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:38.832 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:38.835 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:38.835 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef d8 08 23 fa 70 e2 69 e3 56 97 42 02 d0 |
08:50:38.855 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 56 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.855 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.895 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 57 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.895 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.909 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:38.932 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:38.933 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:38.956 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 60 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:38.956 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:38.997 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:38.997 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef e4 0f 22 01 33 13 40 3c 21 ba 79 9b 00 |
08:50:39.042 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 61 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.042 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.056 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:39.079 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:39.079 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:39.102 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 64 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.103 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.123 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:39.123 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef f0 8a 43 13 43 40 22 13 43 bb 71 7d e6 |
08:50:39.167 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 65 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.167 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.182 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:39.205 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:39.205 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:39.215 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:39.215 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef fc 23 00 27 6a |
08:50:39.228 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 68 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.228 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.257 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 69 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.257 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.271 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:39.295 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:39.295 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:39.318 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 72 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.318 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.350 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:39.396 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x5600 with 256 bytes and CRC32 0x21F62281 |
08:50:39.425 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ee 00 01 00 56 00 00 81 22 f6 21 |
08:50:39.465 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 73 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.465 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.479 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:39.503 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:39.503 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:39.504 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 53,1% |
08:50:39.505 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 00 26 33 d0 e7 03 9b 18 70 76 e6 c0 46 |
08:50:39.525 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 76 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.525 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.564 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 77 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.564 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.579 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:39.602 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:39.602 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:39.604 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:39.604 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 0c 10 10 00 00 b8 77 00 00 a0 02 00 10 |
08:50:39.624 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 80 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.624 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.664 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 81 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.664 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.678 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:39.701 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:39.701 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:39.703 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:39.703 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 18 01 39 0f 4d 39 40 88 42 08 d1 c2 21 |
08:50:39.724 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 84 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.724 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.764 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 85 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.764 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.778 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:39.801 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:39.801 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:39.812 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:39.812 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 24 20 00 ff f7 86 f8 eb 88 01 33 eb 80 |
08:50:39.825 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 88 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.825 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.864 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 89 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.865 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.879 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:39.903 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:39.903 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:39.905 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:39.906 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 30 2b 68 6f e7 c3 21 20 00 ff f7 7d f8 |
08:50:39.926 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 92 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.926 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.967 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 93 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:39.967 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:39.981 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:40.004 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:40.004 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:40.021 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:40.021 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 3c f8 e7 20 6c 00 28 00 d1 78 e6 1b 1a |
08:50:40.028 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 96 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.028 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.066 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 97 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.066 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.080 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:40.104 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:40.104 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:40.108 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:40.108 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 48 32 2b 00 d5 74 e6 00 23 62 64 23 64 |
08:50:40.126 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 100 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.126 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.166 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 101 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.166 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.180 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:40.203 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:40.203 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:40.205 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:40.205 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 54 70 e6 c0 46 a0 02 00 10 c0 21 10 b5 |
08:50:40.226 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 104 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.226 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.265 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 105 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.265 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.279 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:40.303 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:40.303 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:40.310 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:40.311 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 60 05 4c c9 01 20 68 ff f7 b5 fc 80 21 |
08:50:40.326 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 108 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.326 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.366 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 109 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.366 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.380 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:40.403 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:40.403 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:40.405 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:40.405 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 6c 60 68 49 01 ff f7 b0 fc 10 bd c0 46 |
08:50:40.425 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 112 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.425 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.465 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 113 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.465 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.480 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:40.503 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:40.503 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:40.506 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:40.506 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 78 d4 00 00 10 80 20 70 b5 40 04 ff f7 |
08:50:40.526 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 116 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.526 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.566 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 117 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.566 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.580 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:40.603 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:40.603 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:40.606 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:40.606 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 84 0b fa ff f7 e9 ff 1f 21 01 22 0a 4b |
08:50:40.627 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 120 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.627 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.667 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 121 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.667 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.681 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:40.704 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:40.704 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:40.706 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:40.706 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 90 80 24 1b 68 09 4d 19 40 8a 40 5b 06 |
08:50:40.726 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 124 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.726 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.766 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 125 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.766 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.780 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:40.803 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:40.803 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:40.825 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 128 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.825 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.837 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:40.837 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 9c 08 49 9b 0f 9b 00 59 58 e4 03 90 00 |
08:50:40.882 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 129 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.882 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.896 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:40.919 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:40.919 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:40.936 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:40.936 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef a8 ab 68 23 40 5e 42 73 41 5b 42 13 40 |
08:50:40.944 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 132 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.944 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.981 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 133 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:40.981 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:40.996 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:41.019 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:41.019 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:41.041 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 136 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.041 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.049 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:41.049 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef b4 43 50 f7 e7 d4 00 00 10 10 e0 00 e0 |
08:50:41.093 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 137 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.093 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.107 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:41.131 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:41.131 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:41.133 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:41.134 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef c0 b8 77 00 00 f0 b5 04 00 85 b0 1c 20 |
08:50:41.154 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 140 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.154 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.194 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 141 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.194 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.208 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:41.232 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:41.232 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:41.256 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 144 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.256 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.269 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:41.269 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef cc 01 f0 e8 fd 81 23 00 25 5b 00 02 00 |
08:50:41.314 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 145 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.314 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.328 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:41.352 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:41.352 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:41.374 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 148 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.374 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.410 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:41.410 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef d8 83 60 45 60 01 90 04 20 72 4b ff 30 |
08:50:41.455 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 149 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.456 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.470 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:41.493 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:41.495 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:41.517 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 152 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.517 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.573 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:41.573 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef e4 13 60 d0 60 71 4e 01 f0 eb fd 03 00 |
08:50:41.617 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 153 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.617 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.631 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:41.655 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:41.655 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:41.666 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:41.666 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef f0 02 1d ff 32 1d 70 01 33 93 42 fb d1 |
08:50:41.681 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 156 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.682 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.720 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 157 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.721 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.731 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:41.755 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:41.755 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:41.776 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 160 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.776 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.789 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:41.789 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef fc 01 9b 01 9a |
08:50:41.822 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 161 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.822 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.836 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:41.859 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:41.859 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:41.863 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:41.881 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 164 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.881 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.908 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x5700 with 256 bytes and CRC32 0xFDED726E |
08:50:41.914 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ee 00 01 00 57 00 00 6e 72 ed fd |
08:50:41.954 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 165 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:41.954 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.968 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:41.992 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:41.992 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:42.015 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 168 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.015 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:41.995 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 54,5% |
08:50:42.033 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 00 18 61 9d 82 03 23 93 61 33 00 34 33 |
08:50:42.079 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 169 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.079 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.092 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:42.115 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:42.115 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:42.131 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:42.131 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 0c 13 60 20 20 80 25 01 f0 c5 fd 67 4b |
08:50:42.140 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 172 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.140 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.177 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.177 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.191 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:42.214 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:42.215 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:42.238 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 176 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.238 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.274 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:42.274 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 18 6d 00 60 36 83 60 45 60 c5 60 06 60 |
08:50:42.320 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 177 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.320 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.334 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:42.357 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:42.357 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:42.376 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:42.376 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 24 07 00 28 00 01 f0 cc fd 00 22 03 00 |
08:50:42.382 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 180 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.382 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.420 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 181 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.420 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.434 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:42.458 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:42.458 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:42.480 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 184 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.480 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.540 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:42.540 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 30 41 19 1a 70 01 33 99 42 fb d1 38 61 |
08:50:42.585 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 185 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.585 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.599 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:42.622 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:42.622 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:42.626 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:42.626 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 3c 3a 75 ba 61 38 00 fd 61 ff f7 22 f9 |
08:50:42.645 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 188 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.645 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.685 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 189 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.685 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.699 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:42.723 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:42.723 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:42.724 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:42.725 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 48 fa 68 01 1e 38 69 00 d1 a4 e0 01 f0 |
08:50:42.749 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 192 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.749 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.786 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 193 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.786 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.800 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:42.823 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:42.823 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:42.831 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:42.831 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 54 8a fd 00 25 57 4b 18 20 3b 60 3d 75 |
08:50:42.846 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 196 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.846 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.886 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 197 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.886 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.906 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:42.924 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:42.924 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:42.927 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:42.927 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 60 bd 61 01 f0 9d fd 55 4b 02 90 83 60 |
08:50:42.946 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 200 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.946 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:42.987 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 201 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:42.987 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.000 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:43.024 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:43.030 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:43.032 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:43.032 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 6c 01 23 5b 42 c3 60 53 4b 44 60 03 60 |
08:50:43.052 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 204 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.052 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.092 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 205 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.092 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.106 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:43.129 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:43.129 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:43.131 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:43.131 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 78 05 61 45 61 08 20 51 4e 01 f0 8e fd |
08:50:43.151 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 208 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.151 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.192 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 209 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.192 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.205 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:43.229 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:43.229 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:43.230 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:43.230 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 84 50 4b 78 36 23 60 01 23 5b 42 03 90 |
08:50:43.250 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 212 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.251 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.290 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 213 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.291 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.305 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:43.328 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:43.328 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
08:50:43.338 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:43.338 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 90 06 60 44 60 23 81 17 20 65 60 a5 72 |
08:50:43.351 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 216 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.351 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.391 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 217 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.391 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.405 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu da |
08:50:43.429 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
08:50:43.431 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
08:50:43.438 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:43.438 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 9c e5 60 25 61 01 f0 90 fd 02 00 03 00 |
08:50:43.453 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 220 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.453 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.493 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 221 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.493 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.508 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu de |
08:50:43.531 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
08:50:43.531 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
08:50:43.532 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:43.532 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef a8 17 32 1d 70 01 33 93 42 fb d1 a0 61 |
08:50:43.552 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 224 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.552 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.592 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 225 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.592 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.606 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e2 |
08:50:43.630 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
08:50:43.630 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
08:50:43.644 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:43.644 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef b4 17 20 01 f0 85 fd 02 00 03 00 00 21 |
08:50:43.653 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 228 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.653 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.691 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 229 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.691 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.706 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu e6 |
08:50:43.729 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
08:50:43.729 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
08:50:43.732 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:43.732 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef c0 17 32 19 70 01 33 9a 42 fb d1 e0 61 |
08:50:43.752 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 232 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.752 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.791 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 233 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.791 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.806 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ea |
08:50:43.829 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
08:50:43.829 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
08:50:43.831 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:43.831 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef cc 17 20 01 f0 79 fd 02 00 03 00 00 21 |
08:50:43.851 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 236 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.851 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.891 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 237 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.891 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.905 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ee |
08:50:43.929 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
08:50:43.929 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
08:50:43.952 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 240 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:43.952 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:43.966 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:43.966 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef d8 17 32 19 70 01 33 9a 42 fb d1 3a 4b |
08:50:44.011 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 241 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.011 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.025 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f2 |
08:50:44.049 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
08:50:44.049 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
08:50:44.058 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:44.061 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef e4 20 62 23 60 70 20 01 f0 59 fd 04 60 |
08:50:44.074 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 244 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.074 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.112 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 245 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.112 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.126 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu f6 |
08:50:44.150 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
08:50:44.150 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
08:50:44.172 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 248 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.172 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.252 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:44.252 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef f0 05 00 17 20 01 f0 66 fd 01 00 03 00 |
08:50:44.296 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 249 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.296 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.310 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fa |
08:50:44.333 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
08:50:44.346 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
08:50:44.368 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:44.368 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 252 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.368 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef fc 00 22 17 31 |
08:50:44.368 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.401 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 253 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.401 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.415 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu fe |
08:50:44.439 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
08:50:44.439 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
08:50:44.462 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 0 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.462 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.511 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:44.536 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 74 | Program device at flash address 0x5800 with 256 bytes and CRC32 0x5E56E2C9 |
08:50:44.575 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ee 00 01 00 58 00 00 c9 e2 56 5e |
08:50:44.615 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 1 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.616 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.630 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c2 |
08:50:44.653 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
08:50:44.654 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
08:50:44.655 | main | INFO | org.selfbus.updater.FlashFullMode | doFullFlash | 48 | Sending 256 bytes: 55,8% |
08:50:44.656 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 00 1a 70 01 33 99 42 fb d1 31 4b 68 60 |
08:50:44.676 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 4 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.676 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.716 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 5 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.716 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.730 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu c6 |
08:50:44.753 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
08:50:44.753 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
08:50:44.776 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 8 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.776 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.788 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:44.788 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 0c ab 61 31 4b 28 68 eb 61 30 4b aa 84 |
08:50:44.833 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 9 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.833 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.847 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ca |
08:50:44.870 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
08:50:44.870 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
08:50:44.879 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:44.879 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 18 2b 62 03 68 5b 6b 98 47 06 00 01 f0 |
08:50:44.892 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 12 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.892 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.932 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 13 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.932 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:44.946 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu ce |
08:50:44.970 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
08:50:44.970 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
08:50:44.992 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 16 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:44.992 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:45.007 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:45.007 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 24 4f fd 00 22 03 00 01 3e 00 2e 38 da |
08:50:45.052 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 17 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:45.052 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:45.066 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d2 |
08:50:45.089 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:45.089 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
08:50:45.111 | main | DEBUG | org.selfbus.updater.upd.UPDProtocol | checkResult | 51 | . |
08:50:45.111 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 03 22 28 65 ab 1d db 7f 28 49 02 33 |
08:50:45.112 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6 repeat, tpdu 52 fe dc 7f |
08:50:45.133 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 21 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:50:45.133 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:50:45.209 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:45.233 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:45.255 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6 repeat, tpdu 56 fe dc 7f |
08:50:45.335 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:45.414 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:45.494 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:45.574 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:45.653 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:45.733 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:45.813 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:45.892 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:45.972 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:46.052 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:46.131 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:46.211 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:46.291 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:46.370 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:46.450 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:46.529 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:46.609 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:46.689 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:46.768 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:46.848 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:46.928 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.007 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.087 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.167 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.246 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.326 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.406 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.485 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.565 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.644 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.724 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.804 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.883 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:47.963 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:48.043 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:48.122 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:48.202 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:48.146 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 03 22 28 65 ab 1d db 7f 28 49 02 33
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:371) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:50:48.208 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 03 22 28 65 ab 1d db 7f 28 49 02 33 |
08:50:48.264 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:48.282 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:48.362 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:48.442 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:48.521 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:48.601 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:48.680 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:48.760 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:48.840 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:48.919 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:49.003 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:49.084 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:49.948 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:49.957 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.034 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.114 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.193 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.273 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.352 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.432 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.512 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.591 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.671 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.751 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.830 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.910 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:50.990 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:51.071 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:51.150 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:51.213 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 03 22 28 65 ab 1d db 7f 28 49 02 33
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:371) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:50:51.216 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 03 22 28 65 ab 1d db 7f 28 49 02 33 |
08:50:51.295 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:51.298 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:51.302 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6 repeat, tpdu 56 fe dc 7f |
08:50:51.354 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:51.434 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:51.514 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:51.594 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:51.673 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:51.753 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:51.832 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:51.912 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:51.991 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:52.070 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:52.150 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:52.230 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:52.309 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:52.389 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:52.468 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:52.548 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:52.628 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:52.707 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:52.787 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:52.867 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:52.946 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.026 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.106 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.187 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.267 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.345 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.425 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.505 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.584 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.664 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.743 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.824 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.903 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:53.982 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:54.061 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:54.141 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:54.221 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:54.286 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
08:50:54.303 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6, tpdu d6 |
08:50:54.259 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 03 22 28 65 ab 1d db 7f 28 49 02 33
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:371) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:50:54.312 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 03 22 28 65 ab 1d db 7f 28 49 02 33 |
08:50:54.393 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:54.460 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:54.540 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:54.619 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:54.699 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:54.779 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:54.862 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:54.885 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.36->13/3/0 L_Data.ind, low priority hop count 6, tpdu 00 80 00 00 |
08:50:54.908 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.36->13/3/0 L_Data.ind, low priority hop count 6 repeat, tpdu 00 80 00 00 |
08:50:54.984 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:55.064 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:55.143 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:55.223 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:55.303 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:55.387 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:55.465 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:55.541 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:55.621 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:55.701 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:55.783 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:55.861 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:55.940 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.021 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.107 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.179 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.259 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.340 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.419 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.498 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.578 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.657 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.737 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.816 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.896 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:56.975 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:57.055 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:57.135 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:57.215 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
08:50:57.290 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 15.15.192->1.0.14 L_Data.ind, system priority hop count 6 repeat, tpdu 81 |
08:50:57.315 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 03 22 28 65 ab 1d db 7f 28 49 02 33
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:371) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:50:57.317 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
08:50:57.317 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:50:57.318 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:51:00.333 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:390) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:51:00.335 | main | WARN | calimero.mgmt.TL 192.168.1.12:3671 | sendDisconnect | 622 | disconnected not gracefully (timeout) |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:390) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:51:00.339 | main | WARN | org.selfbus.updater.DeviceManagement | sendWithRetry | 355 | ?[0;31mUPDCommand.SEND_DATA send data connected failed : KNXDisconnectException?[0m |
08:51:00.352 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80 |
08:51:03.349 | Calimero link notifier | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.checkSendDisconnect(TransportLayerImpl.java:610) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:525) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:03.351 | Calimero link notifier | WARN | calimero.mgmt.TL 192.168.1.12:3671 | sendDisconnect | 622 | disconnected not gracefully (timeout) |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.checkSendDisconnect(TransportLayerImpl.java:610) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:525) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:03.353 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d7 |
08:51:06.361 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.connect(TransportLayerImpl.java:333) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:352) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:51:06.368 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d7 |
08:51:06.369 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:51:06.366 | main | WARN | org.selfbus.updater.DeviceManagement | sendWithRetry | 355 | ?[0;31mUPDCommand.SEND_DATA no connection opened for 15.15.192 (timeout) : KNXDisconnectException?[0m |
08:51:06.446 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80 |
08:51:07.218 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.5->6/3/3 L_Data.ind, low priority hop count 6, tpdu 00 80 0e 72 |
08:51:09.461 | Calimero link notifier | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:532) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:09.484 | Calimero link notifier | WARN | calimero.mgmt.TL 192.168.1.12:3671 | sendDisconnect | 622 | disconnected not gracefully (timeout) |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:532) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:09.515 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:51:12.489 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.connect(TransportLayerImpl.java:333) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:352) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:51:12.491 | main | WARN | org.selfbus.updater.DeviceManagement | sendWithRetry | 355 | ?[0;31mUPDCommand.SEND_DATA no connection opened for 15.15.192 (timeout) : KNXDisconnectException?[0m |
08:51:12.492 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80 |
08:51:15.503 | Calimero link notifier | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:532) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:15.506 | Calimero link notifier | WARN | calimero.mgmt.TL 192.168.1.12:3671 | sendDisconnect | 622 | disconnected not gracefully (timeout) |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:532) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:15.514 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:51:16.726 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 173 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:16.726 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:51:18.522 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.connect(TransportLayerImpl.java:333) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:352) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:51:18.523 | main | WARN | org.selfbus.updater.DeviceManagement | sendWithRetry | 355 | ?[0;31mUPDCommand.SEND_DATA no connection opened for 15.15.192 (timeout) : KNXDisconnectException?[0m |
08:51:18.535 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80 |
08:51:21.529 | Calimero link notifier | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:532) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:21.532 | Calimero link notifier | WARN | calimero.mgmt.TL 192.168.1.12:3671 | sendDisconnect | 622 | disconnected not gracefully (timeout) |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:532) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:21.540 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:51:24.538 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.connect(TransportLayerImpl.java:333) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:352) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:51:24.540 | main | WARN | org.selfbus.updater.DeviceManagement | sendWithRetry | 355 | ?[0;31mUPDCommand.SEND_DATA no connection opened for 15.15.192 (timeout) : KNXDisconnectException?[0m |
08:51:24.540 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80 |
08:51:26.158 | KNXnet/IP receiver | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | handleServiceType | 397 | received request seq 174 (channel 3) cEMI L-Data.con 1.0.14->15.15.192 |
08:51:26.158 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 210 | confirmation of 15.15.192 |
08:51:26.181 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.32->6/1/11 L_Data.ind, low priority hop count 6, tpdu 00 80 07 30 |
08:51:26.202 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.32->6/1/11 L_Data.ind, low priority hop count 6 repeat, tpdu 00 80 07 30 |
08:51:26.223 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.44->2/0/75 L_Data.ind, low priority hop count 6, tpdu 00 80 |
08:51:26.244 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.44->2/0/75 L_Data.ind, low priority hop count 6 repeat, tpdu 00 80 |
08:51:26.266 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.34->6/1/12 L_Data.ind, low priority hop count 6, tpdu 00 80 07 0e |
08:51:26.289 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.34->6/1/12 L_Data.ind, low priority hop count 6 repeat, tpdu 00 80 07 0e |
08:51:26.312 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.55->3/5/40 L_Data.ind, low priority hop count 6, tpdu 00 80 07 71 |
08:51:26.332 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.15->2/0/75 L_Data.ind, low priority hop count 6, tpdu 00 80 |
08:51:26.357 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.1->1/1/22 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
08:51:26.383 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.97->6/1/41 L_Data.ind, low priority hop count 6 repeat, tpdu 00 80 19 ad |
08:51:26.407 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.1->1/1/22 L_Data.ind, low priority hop count 6 repeat, tpdu 00 80 00 |
08:51:26.432 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.97->6/1/41 L_Data.ind, low priority hop count 6 repeat, tpdu 00 80 19 ad |
08:51:26.458 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 0c 38 |
08:51:26.482 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.1->1/1/23 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
08:51:26.508 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.97->6/1/42 L_Data.ind, low priority hop count 6 repeat, tpdu 00 80 19 28 |
08:51:26.532 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.1->1/1/23 L_Data.ind, low priority hop count 6 repeat, tpdu 00 80 00 |
08:51:26.558 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.97->6/1/42 L_Data.ind, low priority hop count 6 repeat, tpdu 00 80 19 28 |
08:51:26.586 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 0d fa |
08:51:26.833 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.131->1/2/51 L_Data.ind, low priority hop count 6, tpdu 00 80 19 29 |
08:51:27.543 | Calimero link notifier | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:532) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:27.552 | Calimero link notifier | WARN | calimero.mgmt.TL 192.168.1.12:3671 | sendDisconnect | 622 | disconnected not gracefully (timeout) |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:532) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:27.555 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:51:29.121 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 0c 38 |
08:51:29.148 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 0f 62 |
08:51:30.306 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.44->2/0/75 L_Data.ind, low priority hop count 6, tpdu 00 81 |
08:51:30.354 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.1.15->2/0/75 L_Data.ind, low priority hop count 6, tpdu 00 81 |
08:51:30.556 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.connect(TransportLayerImpl.java:333) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:352) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:51:30.558 | main | WARN | org.selfbus.updater.DeviceManagement | sendWithRetry | 355 | ?[0;31mUPDCommand.SEND_DATA no connection opened for 15.15.192 (timeout) : KNXDisconnectException?[0m |
08:51:30.558 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80 |
08:51:33.566 | Calimero link notifier | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:532) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:33.569 | Calimero link notifier | WARN | calimero.mgmt.TL 192.168.1.12:3671 | sendDisconnect | 622 | disconnected not gracefully (timeout) |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:532) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:33.577 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:51:36.302 | KNXnet/IP receiver | DEBUG | calimero.link.192.168.1.12:3671 | frameReceived | 205 | indication 1.0.5->6/2/1 L_Data.ind, low priority hop count 6, tpdu 00 80 0e 72 |
08:51:36.585 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.connect(TransportLayerImpl.java:333) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:352) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:51:36.587 | main | WARN | org.selfbus.updater.DeviceManagement | sendWithRetry | 355 | ?[0;31mUPDCommand.SEND_DATA no connection opened for 15.15.192 (timeout) : KNXDisconnectException?[0m |
08:51:36.588 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80 |
08:51:39.592 | Calimero link notifier | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:532) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:39.594 | Calimero link notifier | WARN | calimero.mgmt.TL 192.168.1.12:3671 | sendDisconnect | 622 | disconnected not gracefully (timeout) |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendDisconnect(TransportLayerImpl.java:618) at tuwien.auto.calimero.mgmt.TransportLayerImpl.disconnectIndicate(TransportLayerImpl.java:599) at tuwien.auto.calimero.mgmt.TransportLayerImpl.handleConnected(TransportLayerImpl.java:532) at tuwien.auto.calimero.mgmt.TransportLayerImpl$NLListener.indication(TransportLayerImpl.java:137) at tuwien.auto.calimero.link.AbstractLink$LinkNotifier.lambda$frameReceived$1(AbstractLink.java:204) at tuwien.auto.calimero.internal.EventListeners.fire(EventListeners.java:137) at tuwien.auto.calimero.link.EventNotifier.fire(EventNotifier.java:169) at tuwien.auto.calimero.link.EventNotifier.run(EventNotifier.java:88) | ||||||
08:51:39.599 | Calimero link notifier | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
08:51:42.608 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.connect(TransportLayerImpl.java:333) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:352) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1427) at tuwien.auto.calimero.mgmt.ManagementClientImpl.send(ManagementClientImpl.java:1276) at tuwien.auto.calimero.mgmt.ManagementClientImpl.sendWait(ManagementClientImpl.java:1365) at org.selfbus.updater.SBManagementClientImpl.sendUpdateData(SBManagementClientImpl.java:71) at org.selfbus.updater.DeviceManagement.sendWithRetry(DeviceManagement.java:340) at org.selfbus.updater.DeviceManagement.doFlash(DeviceManagement.java:264) at org.selfbus.updater.FlashFullMode.doFullFlash(FlashFullMode.java:52) at org.selfbus.updater.Updater.run(Updater.java:406) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:51:42.800 | main | WARN | org.selfbus.updater.DeviceManagement | sendWithRetry | 355 | ?[0;31mUPDCommand.SEND_DATA no connection opened for 15.15.192 (timeout) : KNXDisconnectException?[0m |
08:51:42.801 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80 |