Log session start time Sat Dec 23 08:55:18 CET 2023
Date | Thread | Level | Logger | MethodOfCaller | LineOfCaller | Message |
08:55:18.303 | main | DEBUG | org.selfbus.updater.Updater | <init> | 78 | Selfbus-Updater 1.11 A Tool for updating firmware of a Selfbus device in a KNX network. Selfbus |
08:55:18.319 | main | DEBUG | org.selfbus.updater.Updater | <init> | 79 | Calimero 2.5.1 |
08:55:18.319 | main | INFO | org.selfbus.updater.Updater | <init> | 80 | ?[1;92m _____ ________ __________ __ _______ __ ______ ____ ___ ________________ / ___// ____/ / / ____/ __ )/ / / / ___/ / / / / __ \/ __ \/ |/_ __/ ____/ __ \ \__ \/ __/ / / / /_ / __ / / / /\__ \ / / / / /_/ / / / / /| | / / / __/ / /_/ / ___/ / /___/ /___/ __/ / /_/ / /_/ /___/ / / /_/ / ____/ /_/ / ___ |/ / / /___/ _, _/ /____/_____/_____/_/ /_____/\____//____/ \____/_/ /_____/_/ |_/_/ /_____/_/ |_| by Dr. Stefan Haller, Oliver Stefan et al. Selfbus-Updater 1.11 ?[0m |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 364 | cli: 192.168.1.12 --fileName .\\out8-bcu1_flashstart_0x3000_release_o8_4t_ha_v5.10_libv2.02.hex -f0 |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 379 | logLevel=DEBUG |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 390 | priority=low |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 407 | NO_FLASH=true |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 412 | eraseFlash=false |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 419 | dumpFlashStartAddress=-1 |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 420 | dumpFlashEndAddress=-1 |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 425 | full=false |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 430 | routing=false |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 435 | nat=false |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 440 | fileName=.\\out8-bcu1_flashstart_0x3000_release_o8_4t_ha_v5.10_libv2.02.hex |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 449 | localhost=null |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 454 | localport=0 |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 459 | port=3671 |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 464 | medium=tp1 |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 473 | delay=0 |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 478 | tl4Timeout=false |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 483 | uid= |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 489 | appVersionPtr=0 |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 496 | device=null |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 502 | progDevice=15.15.192 |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 507 | ownAddress=0.0.0 |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 512 | ft12= |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 517 | tpuart= |
08:55:18.350 | main | DEBUG | org.selfbus.updater.Utils | parseHost | 64 | Resolved 192.168.1.12 with /192.168.1.12 |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 527 | knxInterface=/192.168.1.12 |
08:55:18.350 | main | DEBUG | org.selfbus.updater.CliOptions | parse | 547 | logStatistics=false |
08:55:18.350 | main | DEBUG | org.selfbus.updater.Updater | createLink | 145 | Creating KNX network link TP1 medium, device 0.0.0... |
08:55:18.428 | main | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | connect | 187 | establish connection from 192.168.1.209:60703 to 192.168.1.12:3671 (udp) |
08:55:18.428 | main | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | connect | 202 | wait for connect response from 192.168.1.12:3671 ... |
08:55:18.459 | main | INFO | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | connect | 213 | connection established (data endpoint 192.168.1.12:3671, channel 2, tunneling address 1.0.13) |
08:55:18.475 | main | DEBUG | calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 | connect | 187 | establish connection from 192.168.1.209:60704 to 192.168.1.12:3671 (udp) |
08:55:18.475 | main | DEBUG | calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 | connect | 202 | wait for connect response from 192.168.1.12:3671 ... |
08:55:18.475 | main | INFO | calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 | connect | 213 | connection established (data endpoint 192.168.1.12:3671, channel 3) |
08:55:18.506 | main | DEBUG | calimero.link.192.168.1.12:3671 | setMaxApduLength | 515 | using max. APDU length of 220 |
08:55:18.506 | main | DEBUG | calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 | log | 157 | close connection - user request |
08:55:18.506 | main | DEBUG | org.selfbus.updater.DeviceManagement | <init> | 50 | Creating SBManagementClientImpl |
08:55:18.553 | main | INFO | org.selfbus.updater.Updater | run | 297 | KNX connection: tunneling link 192.168.1.12:3671 TP1 medium, device 0.0.0, hopcount 6 |
08:55:18.553 | main | INFO | org.selfbus.updater.Updater | run | 299 | Telegram priority: low |
08:55:18.569 | main | DEBUG | calimero.link.192.168.1.12:3671 | doSend | 514 | send (wait for confirmation) 0.0.0->0/0/0 L_Data.req, system priority hop count 6 repeat, tpdu 01 00 |
08:55:21.590 | main | WARN | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | doExtraBlockingModes | 272 | response timeout waiting for confirmation |
tuwien.auto.calimero.KNXTimeoutException: no confirmation reply received for 0.0.0->0/0/0 L_Data.req, system priority hop count 6 repeat, tpdu 01 00
at tuwien.auto.calimero.knxnetip.ClientConnection.doExtraBlockingModes(ClientConnection.java:271) at tuwien.auto.calimero.knxnetip.ConnectionBase.send(ConnectionBase.java:268) at tuwien.auto.calimero.knxnetip.KNXnetIPTunnel.send(KNXnetIPTunnel.java:213) at tuwien.auto.calimero.link.KNXNetworkLinkIP.doSend(KNXNetworkLinkIP.java:515) at tuwien.auto.calimero.link.KNXNetworkLinkIP.onSend(KNXNetworkLinkIP.java:503) at tuwien.auto.calimero.link.AbstractLink.send(AbstractLink.java:397) at tuwien.auto.calimero.link.KNXNetworkLinkIP.sendRequestWait(KNXNetworkLinkIP.java:480) at tuwien.auto.calimero.mgmt.TransportLayerImpl.sendData(TransportLayerImpl.java:401) at tuwien.auto.calimero.mgmt.TransportLayerImpl.broadcast(TransportLayerImpl.java:408) at tuwien.auto.calimero.mgmt.ManagementClientImpl.readAddress(ManagementClientImpl.java:342) at tuwien.auto.calimero.mgmt.ManagementProceduresImpl.readAddress(ManagementProceduresImpl.java:244) at org.selfbus.updater.DeviceManagement.checkDeviceInProgrammingMode(DeviceManagement.java:384) at org.selfbus.updater.Updater.run(Updater.java:307) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:55:21.605 | main | DEBUG | calimero.mgmt.TL 192.168.1.12:3671 | detach | 430 | detached from tunneling link 192.168.1.12:3671 TP1 medium, device 0.0.0, hopcount 6 |
08:55:21.605 | main | WARN | org.selfbus.updater.DeviceManagement | checkDeviceInProgrammingMode | 393 | ?[0;91m0 Device(s) in bootloader/programming mode: []?[0m |
08:55:21.616 | main | DEBUG | calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 | log | 157 | close connection - user request |
08:55:21.616 | main | DEBUG | calimero.link.192.168.1.12:3671 | connectionClosed | 227 | link closed |
08:55:21.616 | Calimero link notifier | DEBUG | calimero.mgmt.TL 192.168.1.12:3671 | linkClosed | 151 | attached link was closed |
08:55:21.616 | Calimero link notifier | DEBUG | calimero.mgmt.MC 192.168.1.12:3671 | linkClosed | 191 | attached link was closed |
08:55:21.616 | main | ERROR | org.selfbus.updater.Updater | onCompletion | 127 | Operation did not finish. |
org.selfbus.updater.UpdaterException: No device in programming mode.
at org.selfbus.updater.DeviceManagement.checkDeviceInProgrammingMode(DeviceManagement.java:395) at org.selfbus.updater.Updater.run(Updater.java:307) at org.selfbus.updater.Updater.main(Updater.java:104) | ||||||
08:55:21.616 | main | INFO | org.selfbus.updater.Updater | main | 109 | |
08:55:21.616 | main | DEBUG | org.selfbus.updater.Updater | main | 110 | main exit |