| 18:44:29.489 |
main |
DEBUG |
org.selfbus.updater.Updater |
<init> |
78 |
Selfbus-Updater 1.11
A Tool for updating firmware of a Selfbus device in a KNX network.
Selfbus |
| 18:44:29.491 |
main |
DEBUG |
org.selfbus.updater.Updater |
<init> |
79 |
Calimero 2.5.1 |
| 18:44:29.492 |
main |
INFO |
org.selfbus.updater.Updater |
<init> |
80 |
?[1;92m
_____ ________ __________ __ _______ __ ______ ____ ___ ________________
/ ___// ____/ / / ____/ __ )/ / / / ___/ / / / / __ \/ __ \/ |/_ __/ ____/ __ \
\__ \/ __/ / / / /_ / __ / / / /\__ \ / / / / /_/ / / / / /| | / / / __/ / /_/ /
___/ / /___/ /___/ __/ / /_/ / /_/ /___/ / / /_/ / ____/ /_/ / ___ |/ / / /___/ _, _/
/____/_____/_____/_/ /_____/\____//____/ \____/_/ /_____/_/ |_/_/ /_____/_/ |_|
by Dr. Stefan Haller, Oliver Stefan et al. Selfbus-Updater 1.11
?[0m |
| 18:44:29.511 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
364 |
cli: 192.168.1.12 --fileName .\\out8-bcu1_flashstart_0x3000_release_o8_4t_bi_v5.10_libv2.02.hex --full |
| 18:44:29.513 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
379 |
logLevel=DEBUG |
| 18:44:29.513 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
390 |
priority=low |
| 18:44:29.513 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
407 |
NO_FLASH=false |
| 18:44:29.513 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
412 |
eraseFlash=false |
| 18:44:29.513 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
419 |
dumpFlashStartAddress=-1 |
| 18:44:29.513 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
420 |
dumpFlashEndAddress=-1 |
| 18:44:29.514 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
425 |
full=true |
| 18:44:29.514 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
430 |
routing=false |
| 18:44:29.515 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
435 |
nat=false |
| 18:44:29.515 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
440 |
fileName=.\\out8-bcu1_flashstart_0x3000_release_o8_4t_bi_v5.10_libv2.02.hex |
| 18:44:29.515 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
449 |
localhost=null |
| 18:44:29.516 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
454 |
localport=0 |
| 18:44:29.516 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
459 |
port=3671 |
| 18:44:29.516 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
464 |
medium=tp1 |
| 18:44:29.516 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
473 |
delay=0 |
| 18:44:29.516 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
478 |
tl4Timeout=false |
| 18:44:29.517 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
483 |
uid= |
| 18:44:29.517 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
489 |
appVersionPtr=0 |
| 18:44:29.517 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
496 |
device=null |
| 18:44:29.518 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
502 |
progDevice=15.15.192 |
| 18:44:29.518 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
507 |
ownAddress=0.0.0 |
| 18:44:29.518 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
512 |
ft12= |
| 18:44:29.518 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
517 |
tpuart= |
| 18:44:29.519 |
main |
DEBUG |
org.selfbus.updater.Utils |
parseHost |
64 |
Resolved 192.168.1.12 with /192.168.1.12 |
| 18:44:29.519 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
527 |
knxInterface=/192.168.1.12 |
| 18:44:29.519 |
main |
DEBUG |
org.selfbus.updater.CliOptions |
parse |
547 |
logStatistics=false |
| 18:44:29.520 |
main |
DEBUG |
org.selfbus.updater.Updater |
createLink |
145 |
Creating KNX network link TP1 medium, device 0.0.0... |
| 18:44:29.561 |
main |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
connect |
187 |
establish connection from 192.168.1.209:58961 to 192.168.1.12:3671 (udp) |
| 18:44:29.562 |
main |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
connect |
202 |
wait for connect response from 192.168.1.12:3671 ... |
| 18:44:29.572 |
main |
INFO |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
connect |
213 |
connection established (data endpoint 192.168.1.12:3671, channel 2, tunneling address 1.0.13) |
| 18:44:29.579 |
main |
DEBUG |
calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 |
connect |
187 |
establish connection from 192.168.1.209:58962 to 192.168.1.12:3671 (udp) |
| 18:44:29.579 |
main |
DEBUG |
calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 |
connect |
202 |
wait for connect response from 192.168.1.12:3671 ... |
| 18:44:29.583 |
main |
INFO |
calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 |
connect |
213 |
connection established (data endpoint 192.168.1.12:3671, channel 3) |
| 18:44:29.596 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
setMaxApduLength |
515 |
using max. APDU length of 220 |
| 18:44:29.601 |
main |
DEBUG |
calimero.knxnetip.KNXnet/IP DevMgmt 192.168.1.12:3671 |
log |
157 |
close connection - user request |
| 18:44:29.606 |
main |
DEBUG |
org.selfbus.updater.DeviceManagement |
<init> |
50 |
Creating SBManagementClientImpl |
| 18:44:29.634 |
main |
INFO |
org.selfbus.updater.Updater |
run |
297 |
KNX connection: tunneling link 192.168.1.12:3671 TP1 medium, device 0.0.0, hopcount 6
|
| 18:44:29.644 |
main |
INFO |
org.selfbus.updater.Updater |
run |
299 |
Telegram priority: low |
| 18:44:29.647 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->0/0/0 L_Data.req, system priority hop count 6 repeat, tpdu 01 00 |
| 18:44:29.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->0/0/0 L_Data.ind, system priority hop count 6 repeat, tpdu 01 40 |
| 18:44:29.771 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 2) cEMI L-Data.con 1.0.13->0/0/0 |
| 18:44:29.773 |
KNXnet/IP receiver |
WARN |
calimero.link.192.168.1.12:3671 |
frameReceived |
212 |
negative confirmation of 0/0/0: 2e 00 91 e0 10 0d 00 00 01 01 00 |
| 18:44:32.787 |
main |
DEBUG |
calimero.mgmt.TL 192.168.1.12:3671 |
detach |
430 |
detached from tunneling link 192.168.1.12:3671 TP1 medium, device 0.0.0, hopcount 6 |
| 18:44:32.788 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
requestUIDFromDevice |
113 |
Requesting UID from 15.15.192... |
| 18:44:32.790 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 80 |
| 18:44:32.817 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:32.817 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:32.818 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 be |
| 18:44:32.846 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:32.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:32.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:32.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe bd 52 c0 01 10 c8 10 65 af cd e0 fa 5d |
| 18:44:32.900 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:32.906 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
requestUIDFromDevice |
124 |
got: 52:C0:01:10:C8:10:65:AF:CD:E0:FA:5D length 12 |
| 18:44:32.914 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
unlockDeviceWithUID |
202 |
Unlocking device 15.15.192 with UID 52:C0:01:10:C8:10:65:AF:CD:E0:FA:5D... |
| 18:44:32.914 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 bf 52 c0 01 10 c8 10 65 af cd e0 fa 5d |
| 18:44:32.924 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:32.925 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:32.965 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:32.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:32.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:33.001 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:33.001 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:33.006 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
requestBootloaderIdentity |
137 |
Requesting Bootloader Identity... |
| 18:44:33.011 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 b8 01 0b |
| 18:44:33.028 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:33.029 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:33.053 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:33.053 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:33.065 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:33.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe b7 01 0b 00 01 02 02 00 2d 00 00 |
| 18:44:33.102 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:33.107 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
requestBootloaderIdentity |
160 |
Device Bootloader: ?[0;93mVersion: 1.11, sbLib Version: 2.02, Features: 0x0100, App-start: 0x2D00?[0m |
| 18:44:33.129 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:33.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:33.118 |
main |
INFO |
org.selfbus.updater.Updater |
run |
328 |
Requesting App Version String... |
| 18:44:33.151 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 bc |
| 18:44:33.179 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:33.179 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:33.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:33.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe bb ff ff ff ff ff ff ff ff ff ff ff ff |
| 18:44:33.231 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:33.234 |
main |
INFO |
org.selfbus.updater.Updater |
run |
331 |
Current App Version String is: ?[0;92mÿÿÿÿÿÿÿÿÿÿÿÿ?[0m |
| 18:44:33.235 |
main |
INFO |
org.selfbus.updater.Updater |
run |
338 |
Loading file '.\\out8-bcu1_flashstart_0x3000_release_o8_4t_bi_v5.10_libv2.02.hex'... |
| 18:44:33.255 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:33.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:33.273 |
main |
INFO |
org.selfbus.updater.Updater |
run |
340 |
Hex file parsed: start 0x3000, end 0x7203, length 16900, crc32 0xB9F0A613 |
| 18:44:33.565 |
main |
INFO |
org.selfbus.updater.Updater |
run |
364 |
File App Version String is : ?[0;92mO08.10 5.10?[0m found at address 0x4197 |
| 18:44:33.601 |
main |
INFO |
org.selfbus.updater.Updater |
run |
379 |
?[0;93mInfo: There are 768 bytes of unused flash between bootloader and firmware.?[0m |
| 18:44:33.603 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
requestBootDescriptor |
176 |
Requesting Boot Descriptor... |
| 18:44:33.633 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ba |
| 18:44:33.661 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:33.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:33.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:33.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe b9 00 30 00 00 03 72 00 00 13 a6 f0 b9 |
| 18:44:33.715 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:33.719 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
requestBootDescriptor |
186 |
Current firmware: valid: true, start: 0x3000, end: 0x7203, size: 0x4204, crc32: 0xB9F0A613 |
| 18:44:33.734 |
main |
INFO |
org.selfbus.updater.Updater |
run |
400 |
?[0;30m?[42mStarting to send new firmware now:?[0m |
| 18:44:33.737 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
eraseAddressRange |
216 |
Erasing firmware address range: 0x3000 - 0x7203... |
| 18:44:33.738 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 e9 00 30 00 00 03 72 00 00 |
| 18:44:33.739 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:33.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:33.780 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:33.781 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6 repeat, tpdu d6 |
| 18:44:34.296 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:34.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:34.299 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
41 |
Start sending application data (16900 bytes) with telegram delay of 0ms |
| 18:44:34.303 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 1,5% |
| 18:44:34.304 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 00 00 20 00 10 dd 30 00 00 d7 30 00 00 |
| 18:44:34.321 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.362 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.365 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:34.398 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:34.398 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:34.402 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:34.403 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 0c 15 55 00 00 00 00 00 00 00 00 00 00 |
| 18:44:34.425 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.465 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.477 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:34.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:34.500 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:34.505 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:34.505 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 18 00 00 00 00 21 af ff ef 00 00 00 00 |
| 18:44:34.527 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.564 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.564 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:34.602 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:34.602 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:34.606 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:34.607 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 24 00 00 00 00 00 00 00 00 d9 30 00 00 |
| 18:44:34.626 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.667 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.667 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:34.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:34.703 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:34.710 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:34.710 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 30 00 00 00 00 00 00 00 00 db 30 00 00 |
| 18:44:34.728 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.768 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.769 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:34.805 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:34.805 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:34.807 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:34.809 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 3c d5 44 00 00 d5 30 00 00 d5 30 00 00 |
| 18:44:34.829 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.869 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:34.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:34.912 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:34.936 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.936 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.939 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:34.939 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 48 d5 30 00 00 d5 30 00 00 d5 30 00 00 |
| 18:44:34.985 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:34.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:34.998 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:35.028 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:35.033 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:35.046 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:35.047 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 54 d5 30 00 00 d5 30 00 00 d5 30 00 00 |
| 18:44:35.057 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.057 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.095 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.095 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.109 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:35.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:35.132 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:35.155 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.161 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:35.161 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 60 d5 30 00 00 d5 30 00 00 d5 30 00 00 |
| 18:44:35.207 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:35.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:35.243 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:35.259 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:35.260 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 6c d5 30 00 00 d5 30 00 00 d5 30 00 00 |
| 18:44:35.268 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.306 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:35.344 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:35.344 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:35.346 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:35.348 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 78 d5 30 00 00 d5 30 00 00 d5 30 00 00 |
| 18:44:35.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.367 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.423 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:35.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:35.444 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:35.449 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:35.449 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 84 d5 4f 00 00 d5 30 00 00 d5 30 00 00 |
| 18:44:35.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.510 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:35.546 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:35.546 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:35.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/3/3 L_Data.ind, low priority hop count 6, tpdu 00 80 14 b7 |
| 18:44:35.579 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:35.580 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 90 d5 30 00 00 d5 30 00 00 00 00 00 00 |
| 18:44:35.591 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.633 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:35.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:35.669 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:35.694 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.695 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.715 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:35.715 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 9c 00 00 00 00 4d 35 00 00 d5 30 00 00 |
| 18:44:35.760 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:35.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:35.797 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:35.813 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:35.814 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef a8 d5 30 00 00 00 00 00 00 d5 30 00 00 |
| 18:44:35.829 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.869 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:35.905 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:35.905 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:35.932 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.932 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.928 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:35.933 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef b4 d5 30 00 00 d5 30 00 00 d5 30 00 00 |
| 18:44:35.979 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:35.979 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:35.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:36.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:36.016 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:36.039 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.055 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:36.056 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef c0 90 71 00 00 c0 00 00 10 74 00 00 00 |
| 18:44:36.103 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:36.138 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:36.138 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:36.142 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:36.142 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef cc 34 01 00 10 9c 01 00 00 fe e7 fe e7 |
| 18:44:36.164 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.164 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.202 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.203 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.216 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:36.239 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:36.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:36.244 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:36.244 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef d8 fe e7 fe e7 f0 b5 ca 4b ca 49 87 b0 |
| 18:44:36.266 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.304 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.304 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:36.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:36.341 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:36.346 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:36.346 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef e4 8b 42 00 d2 09 e1 00 20 c8 49 8b 42 |
| 18:44:36.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.408 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:36.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:36.444 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:36.447 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:36.447 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef f0 00 d2 12 e1 03 f0 bc fa 03 f0 86 fc |
| 18:44:36.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.510 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:36.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:36.561 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:36.567 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:36.567 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef fc fa 21 c5 4e |
| 18:44:36.587 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.628 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:36.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:36.652 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:36.656 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:36.657 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3000 with 256 bytes and CRC32 0x3F61430A |
| 18:44:36.657 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ee 00 01 00 30 00 00 0a 43 61 3f |
| 18:44:36.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.714 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:36.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:36.749 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:36.754 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 3,0% |
| 18:44:36.755 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 00 89 00 30 68 03 f0 f8 fa 01 f0 6c ff |
| 18:44:36.777 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.816 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.817 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:36.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:36.852 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:36.857 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:36.858 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 0c c0 21 00 24 c1 4b c2 48 c9 01 1c 60 |
| 18:44:36.879 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.919 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.919 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:36.932 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:36.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:36.955 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:36.958 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:36.958 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 18 01 93 01 f0 9f ff c0 21 bf 48 c9 01 |
| 18:44:36.980 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:36.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.021 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.021 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:37.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:37.056 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:37.058 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:37.061 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 24 01 f0 9a ff be 4d bf 4b 28 00 5c 60 |
| 18:44:37.079 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.080 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.120 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.120 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:37.157 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:37.157 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:37.178 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:37.178 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 30 10 22 be 49 be 4c bf 4f 02 f0 26 f8 |
| 18:44:37.194 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.234 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.235 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:37.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:37.273 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:37.295 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.318 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:37.318 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 3c 01 98 01 23 04 21 bd 4a 54 30 02 f0 |
| 18:44:37.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:37.400 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:37.400 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:37.427 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.429 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:37.429 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 48 ff fb 21 00 10 22 28 00 70 31 02 f0 |
| 18:44:37.476 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:37.511 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:37.512 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:37.535 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.556 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:37.556 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 54 19 f8 fa 20 40 00 02 f0 6b f8 8e 21 |
| 18:44:37.603 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.616 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:37.638 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:37.638 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:37.656 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:37.656 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 60 10 20 b6 4b 89 00 5a 58 b5 4c 82 43 |
| 18:44:37.664 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.664 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.709 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.709 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:37.744 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:37.744 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:37.770 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.777 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:37.777 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 6c 5a 50 80 22 b4 49 92 01 c8 6f 0a 25 |
| 18:44:37.826 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:37.861 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:37.861 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:37.887 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.887 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.903 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:37.903 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 78 02 43 ca 67 99 6f 30 68 03 f0 ba fa |
| 18:44:37.948 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:37.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:37.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:37.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:37.985 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:38.028 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:38.028 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 84 b0 49 03 f0 b7 fa c0 21 01 38 00 02 |
| 18:44:38.036 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.036 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.079 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.080 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:38.115 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:38.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:38.118 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:38.124 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 90 20 60 89 01 ad 48 01 f0 61 ff ff 22 |
| 18:44:38.140 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.141 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.184 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.195 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:38.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:38.219 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:38.244 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.245 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.251 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:38.252 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 9c 23 68 93 43 23 60 63 6a 22 68 aa 4b |
| 18:44:38.297 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.297 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.312 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:38.334 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:38.334 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:38.344 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:38.344 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef a8 13 43 23 60 63 6a 00 2b fc da 22 68 |
| 18:44:38.361 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.402 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:38.437 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:38.437 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:38.440 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:38.442 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef b4 a7 49 00 26 0a 40 22 60 80 22 d2 05 |
| 18:44:38.461 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.502 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:38.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:38.538 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:38.541 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:38.542 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef c0 13 42 01 d1 1b 04 9e 0d 0a 20 01 3d |
| 18:44:38.565 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.603 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.604 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.617 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:38.641 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:38.641 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:38.646 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:38.646 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef cc 02 f0 32 f8 00 2d e2 d1 80 21 9d 48 |
| 18:44:38.666 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.706 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.719 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:38.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:38.742 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:38.745 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:38.745 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef d8 49 01 01 f0 3f ff fa 24 14 21 30 00 |
| 18:44:38.766 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.766 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.806 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.820 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:38.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:38.843 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:38.845 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:38.845 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef e4 03 f0 0e fb 64 00 4c 43 9a 4b 9c 42 |
| 18:44:38.866 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.908 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:38.920 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:38.943 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:38.943 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:38.946 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:38.946 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef f0 02 d8 f6 33 ff 33 e4 18 fa 26 00 25 |
| 18:44:38.966 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:38.966 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.008 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.008 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:39.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:39.044 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:39.048 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:39.048 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef fc 76 00 30 00 |
| 18:44:39.070 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.098 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.098 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.112 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:39.135 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:39.135 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:39.137 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:39.137 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3100 with 256 bytes and CRC32 0x984A2EDA |
| 18:44:39.138 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ee 00 01 00 31 00 00 da 2e 4a 98 |
| 18:44:39.159 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.194 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:39.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:39.231 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:39.234 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 4,5% |
| 18:44:39.244 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 00 02 f0 18 f8 95 4a f5 35 13 6a ff 35 |
| 18:44:39.260 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.260 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.295 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:39.332 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:39.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:39.335 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:39.335 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 0c 59 42 4b 41 db 00 13 62 a5 42 f2 d3 |
| 18:44:39.356 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.398 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.398 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:39.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:39.434 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:39.436 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:39.436 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 18 00 24 f8 21 01 9e 14 62 c0 36 30 68 |
| 18:44:39.460 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.460 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.499 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.512 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:39.535 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:39.536 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:39.560 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.568 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:39.569 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 24 ff 31 03 68 1b 68 98 47 fb 21 05 78 |
| 18:44:39.614 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.614 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:39.651 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:39.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:39.669 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:39.670 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 30 30 68 49 00 03 68 2d 02 1b 68 98 47 |
| 18:44:39.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.715 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:39.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:39.752 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:39.777 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.778 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.780 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:39.780 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 3c 02 78 a4 46 2a 43 01 20 25 00 04 ab |
| 18:44:39.827 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.840 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:39.863 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:39.863 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:39.877 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:39.879 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 48 16 00 61 00 ce 40 31 00 03 26 31 40 |
| 18:44:39.892 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.930 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.930 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:39.942 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:39.965 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:39.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:39.980 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:39.980 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 54 02 29 00 d0 54 e1 01 00 a1 40 18 70 |
| 18:44:39.990 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:39.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.032 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:40.067 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:40.068 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:40.093 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.093 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.112 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:40.112 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 60 0d 43 01 34 01 33 08 2c ee d1 00 23 |
| 18:44:40.157 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.158 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.171 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:40.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:40.194 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:40.218 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.228 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:40.229 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 6c 01 98 21 00 c4 30 1a 00 00 68 01 34 |
| 18:44:40.274 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:40.312 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:40.312 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:40.334 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.337 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:40.337 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 78 00 f0 e8 fc 0c 2c f4 d1 00 24 04 ab |
| 18:44:40.384 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.398 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:40.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:40.421 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:40.447 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.457 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:40.463 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 84 1a 5d 01 98 01 3a c4 30 53 42 5a 41 |
| 18:44:40.511 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.511 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:40.546 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:40.546 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:40.574 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.587 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:40.587 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 90 21 00 00 23 00 68 01 34 00 f0 d8 fc |
| 18:44:40.634 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:40.669 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:40.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:40.674 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:40.674 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 9c 08 2c f0 d1 00 24 01 9b 21 00 c4 33 |
| 18:44:40.693 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.736 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.748 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:40.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:40.771 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:40.776 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:40.776 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef a8 18 68 00 f0 b6 fc 01 00 20 00 01 34 |
| 18:44:40.795 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.796 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.838 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:40.873 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:40.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:40.877 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:40.877 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef b4 00 f0 f8 fc 08 2c f2 d1 f9 21 01 9b |
| 18:44:40.898 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.898 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.939 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:40.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:40.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:40.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:40.976 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:40.981 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:40.981 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef c0 49 00 c0 33 18 68 03 68 1b 68 98 47 |
| 18:44:41.000 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.041 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.053 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:41.077 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:41.077 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:41.080 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:41.080 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef cc ff 23 02 78 6b 40 00 20 3c 61 7d 61 |
| 18:44:41.101 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.101 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.142 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.143 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:41.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:41.178 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:41.181 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:41.181 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef d8 bb 61 fa 61 02 f0 02 f8 03 94 01 9b |
| 18:44:41.200 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.200 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.242 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.253 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:41.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:41.279 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:41.281 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:41.281 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef e4 01 9c 5b 6d 54 34 20 00 9b 68 98 47 |
| 18:44:41.302 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.303 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.342 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.342 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:41.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:41.379 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:41.382 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:41.386 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef f0 20 00 00 f0 1b fb 00 28 50 d1 30 bf |
| 18:44:41.404 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.404 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.444 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.457 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:41.481 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:41.481 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:41.496 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:41.496 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef fc f1 e7 00 22 |
| 18:44:41.505 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.536 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.549 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:41.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:41.572 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:41.575 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:41.577 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3200 with 256 bytes and CRC32 0x7C42C119 |
| 18:44:41.577 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ee 00 01 00 32 00 00 19 c1 42 7c |
| 18:44:41.598 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.598 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.632 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:41.669 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:41.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:41.672 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 6,1% |
| 18:44:41.693 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.694 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.689 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 00 1d 68 5f 68 98 68 be 18 ac 18 90 42 |
| 18:44:41.741 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:41.778 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:41.778 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:41.780 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:41.780 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 0c 01 d8 0c 33 e8 e6 24 68 04 32 34 60 |
| 18:44:41.800 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.800 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.842 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:41.877 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:41.879 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:41.902 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.902 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.912 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:41.912 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 18 f5 e7 00 22 1e 68 5c 68 b5 18 94 42 |
| 18:44:41.957 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:41.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:41.971 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:41.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:41.994 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:42.018 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.024 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:42.025 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 24 01 d8 08 33 e1 e6 28 60 04 32 f7 e7 |
| 18:44:42.078 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:42.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:42.114 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:42.137 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.138 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.156 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:42.156 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 30 29 00 20 00 02 f0 12 f9 49 4b e2 00 |
| 18:44:42.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 07 08 |
| 18:44:42.205 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:42.243 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:42.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:42.245 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:42.245 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 3c 9b 18 da 6c 00 2a 1b d1 1b 6d 00 2b |
| 18:44:42.264 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.306 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:42.342 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:42.342 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:42.344 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:42.345 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 48 18 d1 01 32 a2 40 7b 6a 13 40 00 2d |
| 18:44:42.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.365 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.405 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.419 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:42.443 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:42.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:42.467 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.467 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.482 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:42.483 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 54 53 d0 00 2b 02 d1 7b 69 13 43 7b 61 |
| 18:44:42.494 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 14 bf |
| 18:44:42.535 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.535 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:42.571 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:42.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:42.589 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:42.590 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 60 01 9e 21 00 c4 36 30 68 00 f0 57 fc |
| 18:44:42.597 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.598 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.641 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.641 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.653 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:42.677 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:42.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:42.704 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.705 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.725 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:42.725 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 6c 85 42 05 d0 03 23 2a 00 21 00 30 68 |
| 18:44:42.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.784 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:42.807 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:42.811 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:42.827 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:42.830 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 78 00 f0 68 fc 29 00 20 00 00 f0 92 fc |
| 18:44:42.834 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.834 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.880 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.880 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:42.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:42.918 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:42.922 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:42.922 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 84 01 22 3b 69 9a 40 bb 69 01 3a 13 40 |
| 18:44:42.944 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.984 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:42.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:42.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:43.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:43.020 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:43.022 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:43.022 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 90 7a 69 9a 42 02 d0 64 20 01 f0 a4 ff |
| 18:44:43.043 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.043 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.082 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:43.120 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:43.120 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:43.124 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:43.124 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 9c 01 9b c4 33 1d 68 2b 68 28 00 5b 69 |
| 18:44:43.145 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.184 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:43.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:43.221 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:43.224 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:43.224 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef a8 98 47 06 1e 5f d0 2b 68 28 00 1b 69 |
| 18:44:43.249 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.249 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.288 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:43.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:43.323 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:43.327 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:43.327 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef b4 98 47 01 78 00 29 58 d0 7f 23 00 24 |
| 18:44:43.349 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.349 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.390 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.390 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:43.424 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:43.424 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:43.428 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:43.428 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef c0 9c 46 6c 61 01 20 63 08 f2 18 02 92 |
| 18:44:43.449 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.491 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.504 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:43.526 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:43.526 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:43.531 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:43.531 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef cc f3 5c 03 9a 1a 40 04 42 02 d0 1a 00 |
| 18:44:43.551 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.592 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.605 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:43.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:43.629 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:43.630 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:43.630 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef d8 60 46 82 43 60 1c 00 2a 40 d0 93 43 |
| 18:44:43.653 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.653 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.692 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.705 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:43.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:43.729 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:43.731 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:43.732 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef e4 02 9a 21 00 13 70 01 9b 68 61 c4 33 |
| 18:44:43.754 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.792 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.794 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:43.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:43.829 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:43.834 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:43.834 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef f0 18 68 00 f0 12 fc 05 00 07 2c bf d8 |
| 18:44:43.854 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.896 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:43.931 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:43.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:43.952 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:43.953 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef fc 98 e7 00 2b |
| 18:44:43.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:43.991 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:43.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.005 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:44.028 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:44.028 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:44.044 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:44.044 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3300 with 256 bytes and CRC32 0xAA8723B1 |
| 18:44:44.044 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ee 00 01 00 33 00 00 b1 23 87 aa |
| 18:44:44.055 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.055 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.087 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.101 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:44.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:44.124 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:44.126 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 7,6% |
| 18:44:44.142 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 00 ae d1 7b 69 93 43 aa e7 c0 30 00 00 |
| 18:44:44.151 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.151 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.191 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.191 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:44.227 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:44.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:44.229 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:44.230 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 0c cc 30 00 00 d4 30 00 00 dc 00 00 10 |
| 18:44:44.255 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.292 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:44.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:44.329 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:44.353 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.353 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.370 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:44.371 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 18 34 01 00 10 46 82 01 00 63 82 3d 00 |
| 18:44:44.416 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:44.453 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:44.453 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:44.468 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:44.468 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 24 40 02 00 10 fc 00 02 50 84 6e 00 00 |
| 18:44:44.479 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.518 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:44.553 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:44.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:44.569 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:44.569 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 30 54 6e 00 00 34 02 00 10 60 20 00 00 |
| 18:44:44.579 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.620 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:44.655 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:44.655 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:44.657 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:44.657 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 3c 00 80 04 40 00 c0 01 40 04 80 04 40 |
| 18:44:44.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.717 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.717 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.731 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:44.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:44.758 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:44.783 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.790 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:44.790 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 48 00 9f 24 00 24 83 30 00 20 00 00 01 |
| 18:44:44.836 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:44.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:44.873 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:44.887 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:44.888 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 54 ff ff ff f8 db 05 00 00 00 00 03 50 |
| 18:44:44.898 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.899 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:44.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:44.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:44.974 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:44.998 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:44.999 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.015 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:45.015 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 60 b4 01 00 10 84 b2 a1 42 ac d8 01 23 |
| 18:44:45.062 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.074 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:45.097 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:45.098 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:45.116 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:45.116 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 6c 6b 61 38 00 00 24 0c 30 00 f0 d6 f9 |
| 18:44:45.121 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.121 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.163 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.164 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:45.200 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:45.201 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:45.203 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:45.203 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 78 24 4e 30 1d 00 f0 56 f8 02 90 30 00 |
| 18:44:45.224 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.224 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.264 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:45.301 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:45.301 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:45.303 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:45.304 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 84 00 f0 52 f8 02 9b 05 00 00 2b 01 d1 |
| 18:44:45.325 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.331 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:45.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:45.402 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:45.404 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:45.404 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 90 00 28 1a d0 01 22 a2 40 7b 6a 13 40 |
| 18:44:45.425 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.478 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:45.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:45.502 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:45.505 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:45.505 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 9c 00 2d 2c d0 00 2b 02 d1 7b 69 13 43 |
| 18:44:45.529 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.567 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.567 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:45.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:45.603 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:45.619 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:45.619 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef a8 7b 61 01 98 03 23 c4 30 2a 00 21 00 |
| 18:44:45.629 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.668 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.681 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:45.705 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:45.705 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:45.708 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:45.708 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef b4 00 68 00 f0 c9 fb 29 00 20 00 02 f0 |
| 18:44:45.729 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.769 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.769 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:45.807 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:45.807 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:45.811 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:45.811 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef c0 4d f8 29 00 20 00 00 f0 ef fb 01 34 |
| 18:44:45.832 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.872 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:45.909 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:45.910 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:45.911 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:45.911 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef cc 08 36 08 2c d3 d1 01 22 3b 69 9a 40 |
| 18:44:45.932 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.932 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.972 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:45.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:45.995 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:46.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:46.009 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:46.012 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:46.012 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef d8 bb 69 01 3a 13 40 7a 69 9a 42 02 d0 |
| 18:44:46.032 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.074 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.074 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:46.110 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:46.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:46.114 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:46.114 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef e4 64 20 01 f0 fd fe 01 9b d8 6f 00 f0 |
| 18:44:46.154 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.193 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:46.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:46.232 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:46.246 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:46.246 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef f0 a9 f8 00 28 00 d1 f4 e6 ff e6 00 2b |
| 18:44:46.256 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.296 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:46.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:46.332 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:46.358 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.374 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:46.374 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef fc d5 d1 7b 69 |
| 18:44:46.408 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:46.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:46.445 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:46.454 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:46.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.481 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3400 with 256 bytes and CRC32 0xAB7494C7 |
| 18:44:46.482 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ee 00 01 00 34 00 00 c7 94 74 ab |
| 18:44:46.523 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:46.574 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:46.574 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:46.577 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 9,1% |
| 18:44:46.587 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 00 93 43 d1 e7 61 46 19 70 ab e6 c0 46 |
| 18:44:46.600 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.600 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.638 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.638 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:46.675 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:46.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:46.701 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.701 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.696 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:46.701 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 0c 00 02 00 10 00 29 06 d0 04 4b 1b 68 |
| 18:44:46.748 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.748 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:46.785 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:46.785 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:46.805 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:46.805 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 18 cb 18 01 21 99 42 00 d2 19 00 01 60 |
| 18:44:46.810 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.810 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.854 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:46.892 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:46.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:46.908 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:46.908 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 24 70 47 c0 46 34 01 00 10 03 00 01 68 |
| 18:44:46.918 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.918 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.958 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:46.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:46.970 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:46.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:46.994 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:47.019 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.040 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:47.040 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 30 00 20 81 42 06 d0 04 4a 12 68 52 1a |
| 18:44:47.085 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:47.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:47.123 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:47.144 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.144 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:47.145 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 3c 82 42 01 db 18 60 01 30 70 47 c0 46 |
| 18:44:47.189 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.203 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:47.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:47.229 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:47.251 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.276 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:47.277 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 48 34 01 00 10 01 22 10 b5 37 4c e3 68 |
| 18:44:47.321 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:47.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:47.359 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:47.381 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.393 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:47.393 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 54 61 68 9a 40 0a 43 36 49 04 33 0a 60 |
| 18:44:47.439 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.453 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:47.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:47.476 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:47.480 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:47.480 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 60 9b 00 58 58 00 28 27 da 43 00 25 d4 |
| 18:44:47.500 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.543 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.543 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:47.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:47.577 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:47.582 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:47.582 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 6c 00 04 83 0d 31 48 32 49 58 43 03 f0 |
| 18:44:47.604 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.604 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.644 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.644 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:47.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:47.680 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:47.684 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:47.684 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 78 bf f8 e3 6b 01 33 e3 63 e3 6b 01 2b |
| 18:44:47.705 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.705 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.747 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.748 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.759 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:47.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:47.782 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:47.785 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:47.785 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 84 02 d9 a3 6b 18 18 40 08 a0 63 e3 6b |
| 18:44:47.806 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.845 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:47.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:47.882 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:47.886 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:47.886 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 90 63 2b 11 d9 a2 6b 23 6b 9a 42 20 dc |
| 18:44:47.907 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.907 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.948 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:47.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:47.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:47.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:47.984 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:47.987 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:47.988 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 9c 00 22 62 64 21 68 23 6c 20 6c 90 42 |
| 18:44:48.012 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.012 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.052 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.052 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:48.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:48.087 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:48.091 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:48.091 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef a8 07 d0 99 42 05 d3 23 68 21 6c a0 6c |
| 18:44:48.110 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.151 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.151 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:48.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:48.189 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:48.193 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:48.193 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef b4 90 42 06 d1 10 bd 40 22 20 4b 5a 60 |
| 18:44:48.212 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.251 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:48.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:48.289 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:48.293 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:48.293 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef c0 23 68 23 64 f8 e7 5b 1a e1 69 8b 42 |
| 18:44:48.314 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.314 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.354 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.355 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.367 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:48.390 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:48.390 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:48.394 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:48.394 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef cc f4 d3 60 6a a2 64 00 28 f0 d0 03 68 |
| 18:44:48.414 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.414 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.455 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.455 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:48.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:48.492 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:48.515 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.516 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.538 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:48.539 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef d8 1b 68 98 47 ec e7 a2 6b 63 6b 9a 42 |
| 18:44:48.584 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.584 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.598 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:48.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:48.621 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:48.648 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.677 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:48.677 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef e4 e8 dd 00 23 23 64 21 68 62 6c 60 6c |
| 18:44:48.722 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.722 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:48.759 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:48.759 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:48.779 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:48.779 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef f0 98 42 18 d0 91 42 16 d3 23 68 62 6c |
| 18:44:48.784 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.784 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.828 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:48.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:48.864 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:48.866 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:48.866 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef fc a1 6c 01 29 |
| 18:44:48.889 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.915 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:48.953 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:48.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:48.977 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:48.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:48.987 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:48.999 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3500 with 256 bytes and CRC32 0xEB78BFD8 |
| 18:44:49.001 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ee 00 01 00 35 00 00 d8 bf 78 eb |
| 18:44:49.043 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:49.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:49.079 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:49.081 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 10,6% |
| 18:44:49.095 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 00 da d0 9b 1a 22 6a 93 42 d6 d3 a3 6c |
| 18:44:49.106 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.106 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.142 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:49.179 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:49.179 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:49.194 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:49.194 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 0c ff 2b 07 d0 01 23 60 6a a3 64 00 28 |
| 18:44:49.205 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.243 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:49.280 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:49.280 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:49.305 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.371 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:49.371 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 18 02 d0 03 68 5b 68 98 47 01 23 a3 64 |
| 18:44:49.416 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:49.453 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:49.453 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:49.476 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:49.477 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 24 c8 e7 06 4a 53 60 23 68 63 64 c3 e7 |
| 18:44:49.477 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.478 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.524 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.542 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:49.561 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:49.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:49.579 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:49.579 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 30 34 01 00 10 00 c0 01 40 4d 0d 00 00 |
| 18:44:49.587 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.627 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.640 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:49.663 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:49.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:49.665 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:49.665 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 3c ff 03 00 00 fc 00 02 50 02 00 2c 32 |
| 18:44:49.685 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.726 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:49.762 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:49.762 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:49.788 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.788 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.789 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:49.789 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 48 11 78 03 00 01 29 03 d0 00 20 12 78 |
| 18:44:49.837 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:49.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:49.873 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:49.877 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:49.877 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 54 82 42 03 d1 d8 6c 43 42 58 41 c0 b2 |
| 18:44:49.896 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.936 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:49.950 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:49.975 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:49.975 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:49.977 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:49.977 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 60 70 47 70 47 10 b5 1c 30 ff f7 60 ff |
| 18:44:49.999 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:49.999 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.038 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.038 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.052 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:50.075 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:50.075 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:50.077 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:50.077 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 6c 00 28 03 d0 16 22 02 4b db 6c 1a 62 |
| 18:44:50.098 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.098 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.139 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.152 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:50.175 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:50.175 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:50.178 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:50.178 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 78 10 bd c0 46 34 01 00 10 f0 b5 01 26 |
| 18:44:50.202 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.202 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.241 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.253 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:50.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:50.277 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:50.281 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:50.281 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 84 35 00 8d 40 02 69 84 68 03 00 54 40 |
| 18:44:50.301 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.301 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.344 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.344 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:50.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:50.379 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:50.383 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:50.383 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 90 2c 40 cc 40 c0 68 27 00 42 40 2a 40 |
| 18:44:50.403 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.403 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.445 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:50.481 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:50.481 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:50.485 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:50.486 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 9c ca 40 00 20 97 43 94 42 43 d0 87 42 |
| 18:44:50.505 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.548 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:50.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:50.583 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:50.587 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:50.587 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef a8 0a d0 55 24 28 4a d0 6c 04 62 12 68 |
| 18:44:50.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/2/0 L_Data.ind, low priority hop count 6, tpdu 00 80 14 b0 |
| 18:44:50.629 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.671 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.682 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:50.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:50.706 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:50.710 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:50.710 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef b4 14 32 96 42 00 d2 16 00 01 20 de 61 |
| 18:44:50.731 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.732 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.770 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.770 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.785 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:50.808 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:50.808 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:50.831 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.837 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:50.837 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef c0 5a 6b 1f 24 89 00 89 58 01 22 0c 40 |
| 18:44:50.882 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:50.919 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:50.921 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:50.944 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:50.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:50.961 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:50.961 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef cc 49 06 a2 40 89 0f 1c 6a 30 d0 00 2f |
| 18:44:51.006 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:51.043 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:51.043 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:51.065 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.065 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.079 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:51.079 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef d8 2a d0 59 6a 0a 43 5a 62 da 68 6a 40 |
| 18:44:51.125 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.125 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.138 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:51.162 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:51.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:51.188 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.197 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:51.197 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef e4 da 60 1a 6a 00 2a 02 d1 59 6a 00 29 |
| 18:44:51.243 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.244 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:51.279 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:51.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:51.305 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.325 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:51.325 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef f0 09 d0 55 25 16 49 cc 6c 25 62 09 68 |
| 18:44:51.372 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.372 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:51.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:51.407 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:51.432 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.432 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.452 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:51.452 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef fc 0c 00 14 34 |
| 18:44:51.485 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:51.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:51.523 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:51.535 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:51.546 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.560 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3600 with 256 bytes and CRC32 0x081C2C8C |
| 18:44:51.560 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ee 00 01 00 36 00 00 8c 2c 1c 08 |
| 18:44:51.601 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.601 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:51.638 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:51.638 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:51.641 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 12,1% |
| 18:44:51.642 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 14 31 22 d0 dc 61 a0 25 12 49 ed 05 |
| 18:44:51.663 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.703 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.717 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:51.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:51.740 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:51.760 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:51.764 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c 92 00 51 51 5a 6a 11 4c 92 00 11 51 |
| 18:44:51.765 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.765 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.812 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.825 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:51.848 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:51.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:51.873 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.873 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:51.874 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 18 00 22 99 6a 5a 62 89 00 1a 62 4a 51 |
| 18:44:51.921 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.921 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:51.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:51.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:51.957 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:51.970 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:51.971 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 24 d9 6a 89 00 0a 51 da 62 9a 62 f0 bd |
| 18:44:51.984 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:51.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.020 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:52.057 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:52.057 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:52.059 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:52.060 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 30 d9 6a 0a 43 da 62 d3 e7 00 2f 02 d0 |
| 18:44:52.082 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.121 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.135 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:52.158 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:52.158 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:52.164 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:52.164 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 3c 22 43 1a 62 ce e7 99 6a 0a 43 9a 62 |
| 18:44:52.184 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.225 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.226 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:52.262 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:52.262 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:52.265 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:52.265 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 48 ca e7 01 21 d9 61 da e7 34 01 00 10 |
| 18:44:52.285 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.285 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.327 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:52.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:52.364 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:52.368 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:52.368 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 54 ff ff 00 00 00 00 02 50 01 23 f7 b5 |
| 18:44:52.408 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.409 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.447 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.447 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:52.484 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:52.484 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:52.488 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:52.492 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 60 02 00 18 00 88 40 14 69 95 68 00 90 |
| 18:44:52.511 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.511 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.551 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:52.586 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:52.586 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:52.590 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:52.590 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 6c 65 40 05 40 cd 40 d0 68 44 40 01 90 |
| 18:44:52.611 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.651 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.664 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:52.688 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:52.688 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:52.692 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:52.692 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 78 00 98 04 40 cc 40 28 00 a0 43 84 46 |
| 18:44:52.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.752 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.765 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:52.789 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:52.789 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:52.791 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:52.791 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 84 00 20 a5 42 2f d0 64 46 50 6b c9 00 |
| 18:44:52.813 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.852 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:52.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:52.889 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:52.893 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:52.893 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 90 45 18 04 31 41 18 00 2c 28 d0 09 68 |
| 18:44:52.914 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.953 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:52.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:52.966 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:52.990 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:52.990 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:52.992 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:52.992 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 9c 1f 20 0c 00 1e 00 03 27 04 40 49 11 |
| 18:44:53.013 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.013 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.053 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.053 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.067 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:53.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:53.090 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:53.100 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:53.100 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef a8 a6 40 39 40 1b 4c 89 00 09 59 8c 46 |
| 18:44:53.111 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.112 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.154 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:53.189 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:53.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:53.208 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:53.209 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef b4 b1 00 60 46 00 26 0e 50 1f 20 29 68 |
| 18:44:53.216 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.216 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.259 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:53.296 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:53.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:53.321 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.338 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:53.338 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef c0 08 40 83 40 49 11 39 40 89 00 09 59 |
| 18:44:53.383 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.383 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.397 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:53.420 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:53.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:53.438 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:53.438 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef cc 98 00 43 50 00 99 01 9b 4b 40 01 21 |
| 18:44:53.444 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.491 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:53.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:53.527 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:53.551 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.552 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.567 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:53.568 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef d8 d3 60 11 4b 1b 68 0f 33 99 42 00 d2 |
| 18:44:53.614 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.614 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:53.649 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:53.653 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:53.676 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.683 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:53.683 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef e4 19 00 01 20 d1 61 fe bd 2c 68 1f 20 |
| 18:44:53.731 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.731 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:53.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:53.767 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:53.789 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.790 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.794 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:53.795 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef f0 25 00 1e 00 03 27 05 40 ae 40 60 46 |
| 18:44:53.840 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.840 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:53.877 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:53.877 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:53.901 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.902 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.915 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:53.915 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef fc 64 11 07 4d |
| 18:44:53.947 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:53.947 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:53.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:53.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:53.985 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:53.993 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:54.008 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.008 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.022 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3700 with 256 bytes and CRC32 0x6D566063 |
| 18:44:54.033 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ee 00 01 00 37 00 00 63 60 56 6d |
| 18:44:54.073 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.074 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:54.111 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:54.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:54.116 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 13,6% |
| 18:44:54.123 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 00 3c 40 a4 00 64 59 b6 00 30 51 1f 20 |
| 18:44:54.136 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.179 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.179 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:54.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:54.214 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:54.231 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:54.231 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 0c 09 68 08 40 49 11 39 40 89 00 83 40 |
| 18:44:54.245 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.245 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.284 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:54.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:54.319 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:54.323 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:54.323 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 18 49 59 d7 e7 d4 6d 00 00 34 01 00 10 |
| 18:44:54.345 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.384 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.398 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:54.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:54.421 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:54.424 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:54.424 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 24 f8 b5 c3 69 04 00 00 2b 04 d0 1c 30 |
| 18:44:54.445 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.485 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:54.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:54.522 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:54.524 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:54.524 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 30 ff f7 7c fe 00 28 14 d1 f8 bd 63 6b |
| 18:44:54.546 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.546 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.585 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.599 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:54.622 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:54.622 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:54.624 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:54.624 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 3c 91 00 cb 58 1f 20 19 00 01 40 28 00 |
| 18:44:54.645 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.685 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.699 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:54.722 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:54.722 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:54.725 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:54.725 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 48 88 40 81 00 00 20 5b 11 3b 40 9b 00 |
| 18:44:54.747 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.786 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:54.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:54.823 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:54.825 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:54.825 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 54 9b 59 01 32 c8 50 23 6b 9a 42 ec d3 |
| 18:44:54.846 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.885 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:54.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:54.923 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:54.925 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:54.925 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 60 ea e7 00 22 01 25 03 27 00 4e f6 e7 |
| 18:44:54.946 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.946 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:54.986 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:54.987 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:55.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:55.023 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:55.025 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:55.025 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 6c d4 6d 00 00 00 69 70 47 00 69 01 30 |
| 18:44:55.046 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.088 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.088 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:55.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:55.123 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:55.128 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:55.129 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 78 70 47 00 69 02 30 70 47 00 69 03 30 |
| 18:44:55.148 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.148 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.190 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.203 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:55.226 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:55.226 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:55.231 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:55.231 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 84 70 47 00 69 04 30 70 47 00 69 05 30 |
| 18:44:55.250 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.292 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:55.329 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:55.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:55.354 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.367 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:55.367 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 90 70 47 00 69 06 30 70 47 00 69 07 30 |
| 18:44:55.413 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:55.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:55.449 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:55.451 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:55.451 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 9c 70 47 00 69 08 30 70 47 00 69 09 30 |
| 18:44:55.473 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.514 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.526 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:55.549 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:55.549 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:55.552 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:55.552 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef a8 70 47 00 69 0a 30 70 47 00 69 0b 30 |
| 18:44:55.573 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.573 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.613 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:55.649 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:55.649 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:55.672 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.675 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:55.675 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef b4 70 47 00 69 0c 30 70 47 00 69 0d 30 |
| 18:44:55.720 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.734 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:55.757 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:55.757 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:55.781 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.809 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:55.809 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef c0 70 47 00 69 0e 30 70 47 00 69 0f 30 |
| 18:44:55.855 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:55.891 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:55.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:55.901 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:55.901 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef cc 70 47 00 69 10 30 70 47 00 69 11 30 |
| 18:44:55.914 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.955 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:55.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:55.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:55.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:55.991 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:56.007 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:56.007 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef d8 70 47 00 69 12 30 70 47 00 69 13 30 |
| 18:44:56.017 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.056 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.075 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:56.093 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:56.093 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:56.118 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.118 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.150 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:56.150 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef e4 70 47 00 69 14 30 70 47 00 69 15 30 |
| 18:44:56.197 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.209 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:56.232 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:56.232 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:56.248 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:56.248 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef f0 70 47 00 69 16 30 70 47 00 69 17 30 |
| 18:44:56.258 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.258 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.295 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.309 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:56.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:56.333 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:56.356 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.389 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:56.389 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef fc 70 47 00 69 |
| 18:44:56.423 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.423 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.436 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:56.460 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:56.460 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:56.485 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.492 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:56.516 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3800 with 256 bytes and CRC32 0xC35DBC3C |
| 18:44:56.517 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ee 00 01 00 38 00 00 3c bc 5d c3 |
| 18:44:56.559 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:56.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:56.594 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:56.598 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 15,1% |
| 18:44:56.598 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 00 19 30 70 47 00 69 ff 30 70 47 00 69 |
| 18:44:56.621 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.661 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.661 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:56.698 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:56.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:56.702 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:56.702 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 0c 62 30 70 47 00 69 63 30 70 47 60 20 |
| 18:44:56.721 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.762 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.762 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:56.798 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:56.802 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:56.804 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:56.804 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 18 70 47 61 20 70 47 01 48 70 47 c0 46 |
| 18:44:56.826 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.864 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.878 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:56.902 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:56.902 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:56.915 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:56.916 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 24 c4 6d 00 00 12 20 70 47 70 b5 03 79 |
| 18:44:56.929 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.930 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.964 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:56.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:56.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:57.001 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:57.001 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:57.024 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.045 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:57.045 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 30 00 2b 01 d1 00 20 70 bd 83 6e c0 6e |
| 18:44:57.091 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:57.127 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:57.127 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:57.151 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.151 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.165 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:57.168 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 3c 1c 7d 5d 7d 03 68 9b 6c 98 47 09 23 |
| 18:44:57.214 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:57.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:57.250 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:57.255 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:57.255 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 48 00 78 1c 40 08 2c f1 d1 01 2d ef d1 |
| 18:44:57.276 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.314 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.314 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:57.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:57.351 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:57.354 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:57.354 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 54 ff 38 43 42 58 41 c0 b2 eb e7 81 82 |
| 18:44:57.375 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.418 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.418 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.428 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:57.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:57.452 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:57.458 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:57.458 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 60 70 47 00 20 70 47 e0 23 9b 00 99 42 |
| 18:44:57.479 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.518 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.519 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.531 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:57.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:57.554 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:57.556 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:57.557 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 6c 02 d1 01 23 4c 30 03 70 00 20 70 47 |
| 18:44:57.577 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.618 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.631 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:57.654 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:57.654 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:57.656 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:57.656 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 78 17 20 70 47 00 22 83 6a 9a 60 70 47 |
| 18:44:57.677 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.718 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.730 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:57.753 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:57.753 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:57.756 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:57.757 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 84 bf f3 4f 8f 02 4b 03 4a da 60 bf f3 |
| 18:44:57.780 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.781 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.819 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:57.856 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:57.856 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:57.859 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:57.859 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 90 4f 8f fe e7 00 ed 00 e0 04 00 fa 05 |
| 18:44:57.879 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.923 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:57.933 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:57.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:57.957 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:57.962 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:57.962 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 9c 70 b5 04 00 00 6d 0d 00 03 68 db 6e |
| 18:44:57.985 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:57.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.026 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.026 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.037 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:58.061 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:58.061 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:58.063 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:58.063 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef a8 98 47 06 78 20 6d 36 02 03 68 db 6e |
| 18:44:58.083 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.123 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:58.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:58.160 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:58.162 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:58.162 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef b4 98 47 43 78 33 43 9d 42 11 d0 20 6d |
| 18:44:58.184 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.223 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.224 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:58.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:58.261 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:58.286 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.305 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:58.305 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef c0 03 68 db 6e 98 47 2b 0a 03 70 20 6d |
| 18:44:58.351 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:44:58.387 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:44:58.387 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:44:58.405 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:58.405 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef cc 03 68 db 6e 98 47 01 23 45 70 22 6d |
| 18:44:58.413 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.451 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.451 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:44:58.488 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:44:58.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:44:58.490 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:58.490 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef d8 13 75 03 4b 1b 68 32 33 93 61 a5 82 |
| 18:44:58.513 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.553 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:44:58.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:44:58.593 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:44:58.616 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.616 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.641 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:58.642 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef e4 70 bd c0 46 34 01 00 10 70 b5 05 00 |
| 18:44:58.687 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.701 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:44:58.724 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:44:58.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:44:58.741 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:58.741 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef f0 00 6d 0c 00 03 68 db 68 98 47 00 28 |
| 18:44:58.746 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.746 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.792 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:44:58.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:44:58.828 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:44:58.843 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:58.843 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef fc 05 d0 28 6d |
| 18:44:58.853 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.880 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.880 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:44:58.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:44:58.917 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:44:58.919 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:58.920 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3900 with 256 bytes and CRC32 0x208BD3D3 |
| 18:44:58.921 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ee 00 01 00 39 00 00 d3 d3 8b 20 |
| 18:44:58.940 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.940 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.978 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:58.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:58.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:44:59.014 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:44:59.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:44:59.038 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.038 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.018 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 16,7% |
| 18:44:59.048 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 00 03 68 21 00 1b 68 98 47 70 bd 68 6b |
| 18:44:59.096 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:44:59.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:44:59.130 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:44:59.147 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:59.147 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 0c 21 00 03 68 db 68 98 47 00 28 f7 d0 |
| 18:44:59.156 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.196 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.210 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:44:59.233 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:44:59.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:44:59.235 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:59.235 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 18 68 6b f1 e7 37 b5 14 00 f0 22 01 25 |
| 18:44:59.261 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.295 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.309 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:44:59.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:44:59.333 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:44:59.356 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.369 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:59.369 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 24 c0 6b 92 00 0a 40 6d 42 01 68 00 95 |
| 18:44:59.414 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.414 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:44:59.451 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:44:59.451 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:44:59.459 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:59.459 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 30 cd 68 21 00 a8 47 01 20 3e bd c0 23 |
| 18:44:59.479 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.517 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:44:59.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:44:59.554 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:44:59.557 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:59.558 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 3c f7 b5 08 9c 05 00 9b 00 99 42 69 d0 |
| 18:44:59.577 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.620 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:44:59.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:44:59.656 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:44:59.660 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:59.660 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 48 0b d8 80 20 0e 00 01 3b ff 3b 86 43 |
| 18:44:59.679 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.722 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.722 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:44:59.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:44:59.758 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:44:59.762 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:59.762 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 54 9e 42 20 d0 80 3b 99 42 0e d0 00 20 |
| 18:44:59.782 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.824 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.824 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:44:59.860 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:44:59.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:44:59.864 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:59.864 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 60 fe bd 4b 4b 99 42 6d d0 4a 4b 99 42 |
| 18:44:59.886 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.925 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.925 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:44:59.939 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:44:59.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:44:59.962 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:44:59.964 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:44:59.964 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 6c 00 d1 85 e0 e0 23 9b 00 99 42 f2 d1 |
| 18:44:59.986 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:44:59.987 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.026 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.026 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:00.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:00.063 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:00.066 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:00.066 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 78 4c 35 6a e0 64 21 d3 79 12 7a 61 71 |
| 18:45:00.087 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.127 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.127 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:00.164 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:00.164 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:00.166 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:00.166 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 84 63 39 a1 71 41 39 0b 43 e3 71 00 23 |
| 18:45:00.187 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.187 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.227 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:00.264 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:00.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:00.265 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:00.266 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 90 22 72 63 72 a3 72 01 20 e2 e7 0f 23 |
| 18:45:00.287 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.287 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.327 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.327 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:00.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:00.364 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:00.366 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:00.368 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 9c d6 79 10 7a 1e 40 53 7a 1b 02 03 43 |
| 18:45:00.388 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.430 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:00.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:00.469 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:00.494 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.494 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.504 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:00.504 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef a8 a0 20 5b ba 9b b2 01 93 80 00 2b 68 |
| 18:45:00.553 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.566 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:00.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:00.589 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:00.614 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.622 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:00.622 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef b4 81 42 1a d0 22 00 2b 68 28 00 5b 6c |
| 18:45:00.669 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:00.704 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:00.704 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:00.737 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.737 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.762 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:00.762 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef c0 01 99 1f 00 0a 32 33 00 b8 47 43 1e |
| 18:45:00.809 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.809 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:00.844 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:00.844 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:00.850 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:00.851 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef cc 98 41 40 42 06 40 33 00 63 33 63 71 |
| 18:45:00.870 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.870 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.911 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:00.946 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:00.946 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:00.970 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:00.970 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:00.985 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:00.986 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef d8 02 23 a3 71 3e 33 33 43 e3 71 01 9b |
| 18:45:01.032 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:01.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:01.069 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:01.071 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:01.071 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef e4 1b 0a 23 72 01 9b 63 72 d3 e7 1b 6c |
| 18:45:01.092 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.093 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.132 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:01.169 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:01.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:01.192 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.207 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:01.207 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef f0 28 00 1f 00 01 99 33 00 0a 32 b8 47 |
| 18:45:01.252 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.252 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:01.289 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:01.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:01.305 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:01.305 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef fc 00 28 ae d0 |
| 18:45:01.313 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.314 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.340 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.355 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:01.378 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:01.379 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:01.397 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:01.402 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.403 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3A00 with 256 bytes and CRC32 0xA09B30D6 |
| 18:45:01.421 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ee 00 01 00 3a 00 00 d6 30 9b a0 |
| 18:45:01.462 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.462 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:01.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:01.502 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:01.525 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.525 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.505 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 18,2% |
| 18:45:01.529 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 00 2b 68 28 00 9b 6b 98 47 1f 28 a8 d9 |
| 18:45:01.576 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.588 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:01.611 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:01.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:01.634 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.642 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:01.642 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 0c 68 6b 03 68 5b 69 98 47 03 78 5b 07 |
| 18:45:01.690 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.690 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.701 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:01.725 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:01.725 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:01.727 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:01.727 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 18 a1 d5 cd e7 d3 79 9b 06 9d d1 63 23 |
| 18:45:01.749 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.795 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.796 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:01.825 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:01.825 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:01.827 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:01.827 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 24 63 71 60 3b a3 71 3d 33 e3 71 03 68 |
| 18:45:01.850 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.890 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.902 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:01.926 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:01.926 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:01.930 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:01.930 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 30 9b 6b 98 47 00 0a 20 72 2b 68 28 00 |
| 18:45:01.953 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:01.991 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:01.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.005 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:02.028 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:02.028 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:02.030 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:02.030 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 3c 9b 6b 98 47 60 72 a8 e7 53 7a 12 7a |
| 18:45:02.051 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.051 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.091 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.105 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:02.129 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:02.129 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:02.131 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:02.132 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 48 4c 35 07 2a 01 d1 ff 2b 02 d0 01 23 |
| 18:45:02.153 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.153 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.194 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:02.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:02.230 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:02.232 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:02.232 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 54 2b 70 82 e7 64 23 63 71 61 3b a3 71 |
| 18:45:02.256 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.294 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:02.331 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:02.331 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:02.333 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:02.333 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 60 9e 33 e3 71 00 23 23 72 63 72 01 33 |
| 18:45:02.354 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.395 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.395 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:02.431 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:02.431 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:02.434 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:02.434 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 6c a3 72 80 23 09 4a 5b 05 1a 60 02 23 |
| 18:45:02.456 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.495 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.495 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.509 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:02.532 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:02.532 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:02.534 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:02.534 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 78 2b 70 8c e7 62 23 63 71 5f 3b a3 71 |
| 18:45:02.555 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.556 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.595 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:02.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:02.633 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:02.636 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:02.636 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 84 cf 33 e3 71 00 23 23 72 83 e7 c0 46 |
| 18:45:02.655 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/2/4 L_Data.ind, low priority hop count 6, tpdu 00 80 54 |
| 18:45:02.676 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.715 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:02.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:02.752 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:02.755 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:02.755 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 90 81 03 00 00 d1 03 00 00 55 b0 1f 5e |
| 18:45:02.776 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.815 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:02.852 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:02.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:02.875 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.888 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:02.888 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 9c 01 00 30 b5 6a 31 0b 88 9b b2 03 61 |
| 18:45:02.933 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.933 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:02.947 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:02.970 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:02.970 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:02.988 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:02.988 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef a8 c3 6c 00 2b 0f d0 00 24 80 25 c4 64 |
| 18:45:02.996 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:02.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.033 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.047 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:03.071 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:03.071 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:03.073 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:03.073 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef b4 02 68 0b 88 2b 40 55 1d ec 77 94 1d |
| 18:45:03.095 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.136 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.148 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:03.171 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:03.171 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:03.188 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:03.188 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef c0 e5 7f 01 2d 10 d1 5a 42 53 41 5b 00 |
| 18:45:03.198 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.236 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:03.274 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:03.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:03.276 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:03.276 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef cc e3 77 00 23 01 22 0b 80 42 75 02 00 |
| 18:45:03.297 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.297 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.337 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.337 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.350 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:03.374 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:03.374 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:03.376 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:03.376 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef d8 03 63 83 64 83 63 6c 32 6e 30 13 80 |
| 18:45:03.399 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.439 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.453 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:03.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:03.476 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:03.478 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:03.478 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef e4 03 70 30 bd 07 32 d4 7f 01 2c ee d1 |
| 18:45:03.502 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.539 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.540 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:03.577 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:03.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:03.580 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:03.580 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef f0 5c 42 63 41 5b 00 d3 77 e9 e7 03 68 |
| 18:45:03.600 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.600 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.639 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.640 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.654 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:03.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:03.677 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:03.696 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:03.697 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef fc 70 b5 9b 68 |
| 18:45:03.702 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.702 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.733 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.733 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:03.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:03.771 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:03.795 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.796 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.804 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:03.805 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3B00 with 256 bytes and CRC32 0xF45191F6 |
| 18:45:03.805 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ee 00 01 00 3b 00 00 f6 91 51 f4 |
| 18:45:03.845 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:03.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:03.882 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:03.886 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 19,7% |
| 18:45:03.899 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 00 04 00 0d 00 98 47 43 78 00 20 05 2b |
| 18:45:03.908 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.947 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:03.947 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:03.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:03.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:03.984 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:04.012 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.012 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.018 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:04.018 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 0c 04 d9 23 68 29 00 20 00 5b 68 98 47 |
| 18:45:04.064 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.078 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:04.101 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:04.101 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:04.103 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:04.104 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 18 70 bd 03 68 70 b5 05 00 5b 68 0e 00 |
| 18:45:04.125 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.125 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.166 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.180 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:04.203 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:04.203 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:04.206 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:04.206 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 24 98 47 2b 68 04 00 1b 68 31 00 28 00 |
| 18:45:04.230 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.269 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.281 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:04.304 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:04.304 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:04.308 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:04.308 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 30 98 47 02 19 53 1e 18 78 a4 1a 1a 19 |
| 18:45:04.328 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.369 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.383 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:04.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:04.406 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:04.408 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:04.408 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 3c 00 2a 00 dc 70 bd 01 3b 1a 78 00 02 |
| 18:45:04.429 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.469 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.469 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.482 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:04.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:04.506 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:04.508 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:04.508 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 48 10 43 f6 e7 f7 b5 01 93 03 68 05 00 |
| 18:45:04.530 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.569 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.569 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:04.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:04.607 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:04.608 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:04.608 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 54 1b 68 0e 00 17 00 98 47 04 1e 1b d0 |
| 18:45:04.630 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.673 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.673 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:04.708 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:04.707 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:04.709 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:04.709 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 60 2b 68 31 00 5b 68 28 00 98 47 43 1c |
| 18:45:04.730 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.730 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.771 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.784 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:04.807 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:04.807 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:04.810 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:04.810 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 6c 14 d0 20 18 03 1b 00 2b 11 dc 2b 68 |
| 18:45:04.832 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.872 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:04.909 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:04.909 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:04.913 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:04.913 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 78 28 00 5b 69 98 47 00 28 0a d0 73 10 |
| 18:45:04.935 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.975 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:04.975 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:04.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:05.011 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:05.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:05.015 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:05.015 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 84 c2 18 0f 21 c3 5c f6 07 09 d5 0b 40 |
| 18:45:05.036 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.036 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.076 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.076 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:05.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:05.113 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:05.137 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.137 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.148 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:05.148 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 90 01 99 09 01 0b 43 13 70 f7 bd 27 70 |
| 18:45:05.193 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.193 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:05.230 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:05.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:05.232 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:05.232 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 9c 3f 0a 01 34 e6 e7 8b 43 01 99 f5 e7 |
| 18:45:05.253 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.254 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.292 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.293 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:05.330 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:05.330 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:05.357 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.357 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.364 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:05.364 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef a8 f0 b5 87 b0 06 00 00 91 0b 28 17 d8 |
| 18:45:05.377 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.131->1/2/51 L_Data.ind, low priority hop count 6, tpdu 00 80 19 5b |
| 18:45:05.420 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.434 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:05.458 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:05.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:05.483 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.476 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:05.488 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef b4 03 00 08 3b 03 93 9f 4b 03 9a 18 68 |
| 18:45:05.537 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:05.571 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:05.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:05.600 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.600 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.617 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:05.617 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef c0 03 68 1b 68 03 2a 0f d8 51 08 d9 31 |
| 18:45:05.665 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.665 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:05.699 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:05.699 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:05.714 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:05.714 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef cc ff 31 98 47 01 22 03 78 32 40 92 00 |
| 18:45:05.726 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.727 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.766 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.766 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.778 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:05.801 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:05.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:05.826 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.846 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:05.846 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef d8 13 41 0f 22 13 40 5f 1e 08 2f 02 d9 |
| 18:45:05.891 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:05.928 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:05.928 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:05.952 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:05.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:05.976 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:05.976 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef e4 07 b0 f0 bd 37 00 00 24 93 4b 92 4d |
| 18:45:06.024 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.035 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:06.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:06.059 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:06.083 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.105 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:06.105 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef f0 04 93 28 68 61 08 03 68 d9 31 1b 68 |
| 18:45:06.150 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.150 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.164 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:06.187 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:06.187 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:06.203 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:06.203 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef fc ff 31 98 47 |
| 18:45:06.212 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.213 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.242 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:06.278 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:06.278 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:06.280 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:06.292 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3C00 with 256 bytes and CRC32 0x1F4E82FD |
| 18:45:06.292 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ee 00 01 00 3c 00 00 fd 82 4e 1f |
| 18:45:06.305 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.311 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.339 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.339 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.353 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:06.376 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:06.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:06.378 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 21,2% |
| 18:45:06.378 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 00 01 22 03 78 22 40 92 00 13 41 05 92 |
| 18:45:06.399 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.439 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:06.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:06.476 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:06.480 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:06.480 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 0c 0f 22 13 40 01 3b 02 93 bb 42 03 d0 |
| 18:45:06.501 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.501 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.541 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.541 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.555 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:06.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:06.578 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:06.581 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:06.581 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 18 01 34 04 2c e9 d1 e1 e7 ee 21 28 68 |
| 18:45:06.613 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.641 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.641 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.655 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:06.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:06.679 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:06.682 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:06.682 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 24 ff 31 03 68 1b 68 98 47 03 78 62 00 |
| 18:45:06.702 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.702 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.745 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.745 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.757 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:06.780 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:06.780 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:06.782 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:06.782 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 13 41 03 22 1a 40 01 92 03 22 13 42 |
| 18:45:06.804 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.843 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.857 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:06.880 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:06.880 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:06.882 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:06.883 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 3c 1d d0 01 9b 01 2b 5e d0 01 9b 02 2b |
| 18:45:06.904 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.944 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:06.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:06.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:06.981 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:06.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:06.983 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:06.983 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 48 cc d1 21 00 04 9d 08 31 c4 35 28 68 |
| 18:45:07.004 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.044 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:07.081 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:07.081 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:07.083 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:07.083 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 54 ff f7 61 ff 01 9b 18 42 00 d1 dd e0 |
| 18:45:07.104 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.144 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.158 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:07.181 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:07.181 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:07.184 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:07.184 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 60 01 21 01 24 b9 40 76 4b 5a 6a 0a 40 |
| 18:45:07.205 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.245 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.258 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:07.281 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:07.281 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:07.283 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:07.283 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 6c 20 42 00 d1 ce e0 00 2a b6 d1 5a 69 |
| 18:45:07.305 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.346 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:07.382 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:07.382 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:07.398 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:07.398 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 78 80 e0 f7 21 28 68 49 00 03 68 1b 68 |
| 18:45:07.407 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.445 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:07.482 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:07.482 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:07.506 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.517 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:07.517 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 84 98 47 03 78 62 00 13 41 03 22 1a 40 |
| 18:45:07.563 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:07.599 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:07.599 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:07.623 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.623 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.639 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:07.639 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 90 03 9b 01 92 03 2b 06 d8 04 9b 39 00 |
| 18:45:07.686 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.686 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:07.721 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:07.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:07.725 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:07.725 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 9c c4 33 18 68 ff f7 3b ff 00 90 21 00 |
| 18:45:07.747 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.786 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:07.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:07.823 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:07.849 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.857 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:07.858 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef a8 66 4f 08 31 38 68 ff f7 34 ff 02 9b |
| 18:45:07.903 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.903 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:07.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:07.940 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:07.940 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:07.942 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:07.943 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef b4 04 00 de 00 01 9b 63 4d 02 2b 5f d0 |
| 18:45:07.967 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:07.967 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.007 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:08.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:08.046 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:08.068 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.091 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:08.091 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef c0 03 2b 60 d0 01 2b 02 d1 00 9b 03 43 |
| 18:45:08.136 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.150 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:08.173 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:08.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:08.196 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.214 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:08.214 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef cc 00 93 00 9b 00 2b 66 d0 28 00 4c 30 |
| 18:45:08.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.36->13/3/0 L_Data.ind, low priority hop count 6, tpdu 00 80 00 00 |
| 18:45:08.261 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:08.297 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:08.297 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:08.302 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:08.302 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef d8 80 19 ff f7 a7 fb 00 28 00 d1 7f e7 |
| 18:45:08.320 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.361 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.361 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:08.397 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:08.401 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:08.422 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.423 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.433 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:08.433 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef e4 00 23 02 9a ae 19 33 65 01 33 93 40 |
| 18:45:08.479 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:08.514 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:08.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:08.540 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.540 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.548 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:08.548 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef f0 53 4a 51 6a 19 42 00 d0 74 e7 51 69 |
| 18:45:08.593 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:08.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:08.630 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:08.638 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:08.638 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef fc 0b 43 53 61 |
| 18:45:08.654 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.654 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.683 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:08.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:08.720 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:08.722 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:08.723 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3D00 with 256 bytes and CRC32 0x70AC0DD7 |
| 18:45:08.723 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ee 00 01 00 3d 00 00 d7 0d ac 70 |
| 18:45:08.743 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.778 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.779 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:08.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:08.815 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:08.818 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 22,7% |
| 18:45:08.818 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 00 70 e7 28 68 66 10 03 68 f0 36 ff 36 |
| 18:45:08.838 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.878 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:08.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:08.915 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:08.918 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:08.918 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 0c 31 00 1b 68 98 47 03 78 28 68 00 93 |
| 18:45:08.939 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.939 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.981 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:08.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:08.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:09.016 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:09.016 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:09.019 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:09.019 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 18 03 68 31 00 1b 68 98 47 f2 21 06 78 |
| 18:45:09.042 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.081 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:09.118 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:09.118 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:09.121 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:09.121 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 24 28 68 ff 31 03 68 1b 68 98 47 05 78 |
| 18:45:09.142 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.184 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:09.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:09.220 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:09.224 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:09.224 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 30 21 00 25 41 01 9b 08 31 1d 40 04 9b |
| 18:45:09.246 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.285 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.285 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.298 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:09.322 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:09.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:09.327 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:09.327 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 3c c4 33 18 68 ff f7 eb fe 01 9a 01 99 |
| 18:45:09.346 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.388 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:09.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:09.425 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:09.427 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:09.427 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 48 68 40 ba 40 3c 4b 08 42 3d d1 59 6a |
| 18:45:09.449 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.488 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:09.525 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:09.525 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:09.527 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:09.527 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 54 0a 42 00 d1 44 e7 05 98 91 43 02 30 |
| 18:45:09.549 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.549 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.589 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.602 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:09.625 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:09.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:09.643 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:09.643 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 60 06 41 03 20 59 62 06 40 d0 43 01 2e |
| 18:45:09.650 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.688 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.688 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.702 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:09.726 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:09.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:09.752 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.755 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:09.756 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 6c 45 d0 02 2e 00 d0 37 e7 11 42 00 d0 |
| 18:45:09.801 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:09.838 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:09.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:09.860 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:09.860 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 78 34 e7 59 69 0a 43 41 e0 00 9b 03 40 |
| 18:45:09.863 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.905 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.905 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:09.918 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:09.942 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:09.942 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:09.944 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:09.944 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 84 a2 e7 00 9b 03 40 00 93 00 28 9e d1 |
| 18:45:09.964 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:09.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.003 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.018 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:10.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:10.041 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:10.059 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:10.059 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 90 03 00 02 00 02 99 38 68 ff f7 d8 fe |
| 18:45:10.065 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.065 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.110 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:10.146 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:10.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:10.172 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.192 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:10.192 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 9c ab 19 dc 64 1c 65 a8 19 50 30 ff f7 |
| 18:45:10.236 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:10.274 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:10.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:10.289 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:10.289 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef a8 41 fb 00 28 00 d1 19 e7 00 23 02 9a |
| 18:45:10.300 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.339 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.339 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.352 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:10.376 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:10.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:10.378 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:10.378 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef b4 ad 19 eb 64 01 33 93 40 20 4a 51 6a |
| 18:45:10.399 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.438 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.438 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:10.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:10.475 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:10.502 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.512 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:10.512 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef c0 19 42 00 d0 0e e7 51 69 99 43 51 61 |
| 18:45:10.560 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:10.594 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:10.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:10.622 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:10.623 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef cc 0a e7 05 98 00 99 01 41 03 20 01 40 |
| 18:45:10.625 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.671 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.683 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:10.706 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:10.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:10.724 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:10.725 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef d8 01 29 06 d1 59 6a 11 42 12 d0 59 6a |
| 18:45:10.734 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.734 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.773 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:10.809 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:10.809 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:10.811 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:10.811 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef e4 0a 43 5a 62 fc e6 02 29 f9 d1 59 6a |
| 18:45:10.832 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.872 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:10.910 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:10.910 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:10.911 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:10.912 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef f0 11 42 f6 d1 59 69 11 43 08 e0 0a 42 |
| 18:45:10.933 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.933 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.972 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:10.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:10.987 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:11.010 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:11.010 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:11.012 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:11.012 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef fc 00 d0 f1 e6 |
| 18:45:11.033 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.062 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.076 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:11.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:11.100 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:11.102 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:11.104 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3E00 with 256 bytes and CRC32 0x20BF561E |
| 18:45:11.104 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ee 00 01 00 3e 00 00 1e 56 bf 20 |
| 18:45:11.124 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.159 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:11.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:11.196 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:11.198 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 24,2% |
| 18:45:11.198 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 00 5a 69 02 40 5a 61 ed e6 59 69 91 43 |
| 18:45:11.222 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.222 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.259 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:11.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:11.296 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:11.300 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:11.300 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 0c 59 61 e8 e7 00 2a 00 d0 e6 e6 5a 69 |
| 18:45:11.320 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.361 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.361 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:11.398 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:11.398 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:11.400 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:11.400 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 18 8a 43 f3 e7 0b 2e 00 d0 e0 e6 39 00 |
| 18:45:11.421 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.461 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.462 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:11.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:11.498 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:11.501 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:11.501 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 24 28 68 ff f7 78 fe 01 23 04 4a bb 40 |
| 18:45:11.522 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.562 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:11.599 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:11.599 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:11.601 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:11.601 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 30 51 6a 00 28 c4 d0 5d e7 f4 01 00 10 |
| 18:45:11.622 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.622 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.663 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:11.699 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:11.699 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:11.701 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:11.701 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 3c 34 01 00 10 34 02 00 10 f8 01 00 10 |
| 18:45:11.722 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.722 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.761 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:11.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:11.799 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:11.801 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:11.801 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 48 b4 01 00 10 30 b5 04 00 0d 00 85 b0 |
| 18:45:11.822 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.864 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:11.898 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:11.898 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:11.918 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:11.918 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 54 0a 22 0c 49 01 a8 02 f0 80 fd 23 68 |
| 18:45:11.922 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.967 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:11.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:11.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:12.005 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:12.005 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:12.028 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.028 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.057 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:12.058 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 60 29 00 9b 68 20 00 98 47 43 78 01 20 |
| 18:45:12.103 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.116 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:12.140 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:12.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:12.165 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.169 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:12.169 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 6c 05 2b 05 dd 0f 2b 05 dc 01 aa d3 18 |
| 18:45:12.214 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.228 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:12.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:12.251 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:12.279 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.298 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:12.298 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 78 06 3b 18 78 05 b0 30 bd 01 20 40 42 |
| 18:45:12.346 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:12.381 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:12.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:12.398 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:12.398 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 84 fa e7 c0 46 c9 6d 00 00 43 68 10 b5 |
| 18:45:12.427 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.465 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:12.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:12.506 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:12.520 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:12.521 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 90 04 00 18 6d 03 68 db 6d 98 47 01 78 |
| 18:45:12.532 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.532 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.569 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.569 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.582 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:12.606 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:12.606 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:12.608 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:12.608 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 9c 08 1e 06 d0 60 68 03 6d 5b 68 c9 18 |
| 18:45:12.629 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.669 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.682 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:12.705 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:12.710 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:12.725 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:12.725 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef a8 89 b2 ff f7 1f fd 10 bd 03 68 10 b5 |
| 18:45:12.735 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.773 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:12.810 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:12.810 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:12.812 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:12.812 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef b4 1b 69 04 00 98 47 00 28 03 d0 41 78 |
| 18:45:12.833 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.873 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.874 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:12.909 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:12.909 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:12.934 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.937 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:12.937 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef c0 60 68 ff f7 13 fd 10 bd 03 68 10 b5 |
| 18:45:12.984 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:12.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:12.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:13.019 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:13.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:13.041 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.046 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:13.046 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef cc 1b 69 0c 00 98 47 00 28 03 d0 03 21 |
| 18:45:13.091 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.105 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:13.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:13.129 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:13.131 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:13.131 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef d8 61 43 02 31 40 18 10 bd 10 b5 04 00 |
| 18:45:13.152 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.152 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.192 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:13.229 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:13.229 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:13.231 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:13.231 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef e4 ff f7 f0 ff 03 1e 0b d0 5b 78 01 78 |
| 18:45:13.252 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.252 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.291 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:13.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:13.329 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:13.332 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:13.332 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef f0 60 68 9b 06 03 d5 03 6d 5b 68 c9 18 |
| 18:45:13.353 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.353 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.393 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.393 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:13.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:13.430 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:13.434 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:13.434 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef fc 89 b2 ff f7 |
| 18:45:13.455 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.455 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.483 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.497 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:13.520 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:13.520 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:13.522 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:13.522 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x3F00 with 256 bytes and CRC32 0x065321E0 |
| 18:45:13.523 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ee 00 01 00 3f 00 00 e0 21 53 06 |
| 18:45:13.543 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.543 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.579 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:13.617 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:13.617 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:13.621 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 25,8% |
| 18:45:13.624 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 00 f5 fc 03 00 18 00 10 bd 10 b5 ff f7 |
| 18:45:13.642 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/0 L_Data.ind, low priority hop count 6, tpdu 00 80 03 7a |
| 18:45:13.663 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.704 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.704 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.717 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:13.741 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:13.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:13.746 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:13.746 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 0c dd ff 01 30 10 bd 00 23 42 1d 43 71 |
| 18:45:13.768 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.768 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.808 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.808 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.820 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:13.844 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:13.844 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:13.847 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:13.847 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 18 d3 77 82 1d d3 77 c2 1d d3 77 01 22 |
| 18:45:13.866 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.907 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.907 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:13.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:13.944 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:13.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:13.948 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:13.948 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 24 52 42 02 81 02 32 02 71 03 4a c3 80 |
| 18:45:13.968 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:13.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.011 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:14.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:14.046 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:14.050 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:14.050 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 30 d3 87 03 4a c3 60 d3 87 70 47 c0 46 |
| 18:45:14.073 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.073 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.110 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.125 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:14.147 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:14.151 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:14.173 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.197 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:14.197 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 3c 3a 02 00 10 3c 02 00 10 02 22 43 1d |
| 18:45:14.243 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:14.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:14.281 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:14.297 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:14.297 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 48 10 b5 da 77 0f 23 81 69 4a 79 1a 40 |
| 18:45:14.307 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.346 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:14.382 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:14.382 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:14.401 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:14.402 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 54 03 68 07 32 9b 6a 98 47 10 bd 10 b5 |
| 18:45:14.407 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.449 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:14.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:14.486 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:14.511 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.511 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.535 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:14.535 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 60 43 6b 1b 7d db 07 10 d5 c0 29 05 d0 |
| 18:45:14.549 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/5/1 L_Data.ind, low priority hop count 6, tpdu 00 80 0d 41 |
| 18:45:14.593 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.605 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:14.629 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:14.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:14.653 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.653 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.667 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:14.668 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 6c 80 23 5b 00 99 42 0c d0 00 20 10 bd |
| 18:45:14.715 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.727 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:14.751 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:14.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:14.774 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.783 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:14.783 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 78 51 7a 13 7a 09 02 19 43 03 68 49 ba |
| 18:45:14.829 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:14.865 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:14.865 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:14.889 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.896 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:14.897 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 84 db 68 89 b2 98 47 01 20 f3 e7 43 1d |
| 18:45:14.942 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:14.942 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:14.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:14.979 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:14.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:14.996 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:14.996 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 90 da 7f d1 b2 00 2a fb d1 01 32 da 77 |
| 18:45:15.005 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.005 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.041 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.055 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:15.078 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:15.078 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:15.081 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:15.081 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 9c 83 69 b0 24 d9 70 19 71 e1 21 9a 71 |
| 18:45:15.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.141 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.141 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:15.178 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:15.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:15.196 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:15.197 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef a8 3f 32 1c 70 59 71 da 71 ff f7 c8 ff |
| 18:45:15.204 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.204 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.243 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:15.280 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:15.280 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:15.282 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:15.283 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef b4 e9 e7 f0 b5 85 b0 03 93 03 68 02 91 |
| 18:45:15.303 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.303 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.343 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.357 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:15.380 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:15.380 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:15.387 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:15.387 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef c0 1b 68 04 00 17 00 98 47 02 99 06 00 |
| 18:45:15.409 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.409 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.449 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.462 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:15.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:15.485 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:15.488 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:15.488 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef cc 20 00 ff f7 94 fd 63 68 5a 1d d1 7f |
| 18:45:15.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.32->6/1/11 L_Data.ind, low priority hop count 6, tpdu 00 80 07 c1 |
| 18:45:15.537 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.572 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:15.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:15.608 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:15.610 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:15.610 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef d8 cd b2 ac 46 00 29 fa d1 01 31 d1 77 |
| 18:45:15.634 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.671 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:15.708 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:15.708 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:15.711 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:15.712 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef e4 9b 69 bc 22 b9 b2 1f 71 0f 27 1a 70 |
| 18:45:15.733 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.733 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:15.809 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:15.809 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:15.811 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:15.811 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef f0 0a 0a da 70 42 1c 17 40 20 22 52 42 |
| 18:45:15.832 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.871 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:15.909 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:15.910 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:15.914 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:15.914 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef fc 3a 43 5a 71 |
| 18:45:15.935 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.936 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.962 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:15.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:15.976 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:15.999 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:15.999 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:16.001 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:16.002 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4000 with 256 bytes and CRC32 0x542C475B |
| 18:45:16.002 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ee 00 01 00 40 00 00 5b 47 2c 54 |
| 18:45:16.024 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.059 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.072 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:16.095 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:16.095 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:16.101 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 27,3% |
| 18:45:16.102 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 00 03 9a 80 27 00 2a 00 d0 40 3f 00 28 |
| 18:45:16.121 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.121 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.161 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.161 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:16.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:16.198 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:16.200 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:16.200 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 0c 1f d0 1a 00 01 3e 08 32 00 28 15 dc |
| 18:45:16.220 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.261 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:16.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:16.299 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:16.302 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:16.302 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 18 62 46 00 26 3a 43 9e 71 da 71 02 98 |
| 18:45:16.322 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.362 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:16.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:16.399 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:16.401 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:16.401 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 24 22 68 00 90 d7 68 20 00 80 22 b8 47 |
| 18:45:16.423 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.423 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.462 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:16.499 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:16.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:16.501 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:16.501 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 30 60 68 ff f7 87 ff 02 9b e3 60 63 68 |
| 18:45:16.523 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.563 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:16.599 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:16.599 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:16.619 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:16.619 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 3c 9b 6a 5e 75 05 b0 f0 bd 35 5c 01 38 |
| 18:45:16.630 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.668 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:16.703 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:16.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:16.728 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.728 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.749 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:16.749 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 48 15 70 01 32 e2 e7 32 78 94 46 e1 e7 |
| 18:45:16.795 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.795 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.808 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:16.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:16.831 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:16.856 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.856 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.852 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:16.857 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 54 f0 b5 89 b0 06 93 43 68 04 00 98 6b |
| 18:45:16.906 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.918 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:16.941 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:16.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:16.967 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:16.967 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:16.987 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:16.987 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 60 04 91 03 68 05 92 9b 68 98 47 63 68 |
| 18:45:17.032 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:17.069 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:17.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:17.094 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.105 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:17.105 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 6c 05 78 01 90 98 6b 04 99 03 68 1b 68 |
| 18:45:17.150 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.150 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.163 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:17.187 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:17.187 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:17.220 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:17.220 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 78 98 47 03 90 00 28 08 db 6b 00 07 93 |
| 18:45:17.234 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.234 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.270 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:17.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:17.308 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:17.332 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.351 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:17.352 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 84 01 9b 5f 1c 01 9b 07 9a fb 1a 9a 42 |
| 18:45:17.397 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.397 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:17.433 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:17.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:17.452 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:17.452 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 90 01 da 09 b0 f0 bd 3b 78 03 9a 93 42 |
| 18:45:17.460 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.460 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.498 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.512 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:17.535 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:17.535 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:17.559 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.572 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:17.572 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 9c 38 d1 7d 78 0e 9b 9d 42 34 d0 23 68 |
| 18:45:17.616 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.617 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:17.653 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:17.653 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:17.656 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:17.656 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef a8 29 00 9b 68 20 00 98 47 40 22 05 9e |
| 18:45:17.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.717 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.717 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.731 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:17.755 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:17.755 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:17.757 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:17.757 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef b4 03 78 40 3e 96 43 32 d1 2c 3a 13 40 |
| 18:45:17.779 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.779 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.818 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:17.856 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:17.856 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:17.858 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:17.858 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef c0 93 42 25 d1 23 68 29 00 20 00 1b 68 |
| 18:45:17.879 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.919 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.919 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:17.933 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:17.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:17.956 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:17.958 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:17.958 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef cc 98 47 02 90 00 28 1d d0 29 00 20 00 |
| 18:45:17.979 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:17.979 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.019 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:18.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:18.056 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:18.058 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:18.058 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef d8 ff f7 0f fd 00 28 19 dd 06 9a c3 1d |
| 18:45:18.078 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.119 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.119 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:18.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:18.156 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:18.158 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:18.158 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef e4 d3 18 72 42 9a 5c 02 99 8a 55 01 36 |
| 18:45:18.178 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.218 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.232 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:18.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:18.255 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:18.259 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:18.259 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef f0 86 42 f8 d1 23 68 20 00 5b 69 98 47 |
| 18:45:18.279 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.320 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.334 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:18.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:18.362 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:18.365 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:18.366 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef fc 00 28 07 d0 |
| 18:45:18.385 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.385 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.417 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.417 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:18.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:18.452 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:18.456 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:18.456 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4100 with 256 bytes and CRC32 0x0F146DDF |
| 18:45:18.457 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ee 00 01 00 41 00 00 df 6d 14 0f |
| 18:45:18.478 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.478 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.515 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.515 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:18.550 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:18.550 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:18.553 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 28,8% |
| 18:45:18.554 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 00 80 22 eb 07 00 d4 78 3a 6d 10 43 5d |
| 18:45:18.575 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.614 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.628 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:18.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:18.651 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:18.653 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:18.653 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 0c 13 43 43 55 02 37 b9 e7 3f 22 06 9b |
| 18:45:18.674 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.714 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.727 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:18.751 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:18.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:18.775 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.782 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:18.782 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 18 db 79 13 40 02 9a 13 70 e8 e7 05 9a |
| 18:45:18.828 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:18.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:18.868 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:18.891 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.904 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:18.904 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 24 00 2a f3 d1 0c 32 13 40 93 42 ef d1 |
| 18:45:18.951 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:18.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:18.963 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:18.987 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:18.987 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:19.011 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.029 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:19.029 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 30 01 23 29 00 20 00 04 9a ff f7 3d ff |
| 18:45:19.075 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.075 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:19.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:19.112 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:19.133 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:19.133 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 3c e8 e7 f8 b5 0c 00 41 1d cd 7f 00 2d |
| 18:45:19.139 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.185 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:19.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:19.220 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:19.242 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:19.242 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 48 fc d1 40 26 01 35 cd 77 17 0a 85 69 |
| 18:45:19.247 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.294 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:19.329 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:19.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:19.355 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.355 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.375 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:19.375 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 54 d2 b2 34 42 03 d0 99 00 21 43 0e 43 |
| 18:45:19.421 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:19.457 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:19.457 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:19.479 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.493 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:19.494 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 60 f4 b2 b0 23 2b 70 50 3b ef 70 2a 71 |
| 18:45:19.541 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.541 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:19.576 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:19.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:19.578 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:19.578 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 6c 6b 71 ac 71 ff f7 e8 fe f8 bd 0b 4a |
| 18:45:19.602 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.602 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.642 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.642 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.655 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:19.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:19.678 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:19.705 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.705 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.714 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:19.714 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 78 10 b5 d3 8f 04 00 01 33 d3 87 43 79 |
| 18:45:19.761 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:19.796 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:19.796 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:19.821 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.825 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:19.825 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 84 00 2b 01 d0 00 23 43 71 81 21 20 00 |
| 18:45:19.872 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.884 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:19.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:19.908 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:19.919 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:19.919 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 90 e2 88 00 23 ff f7 d3 ff 23 68 20 00 |
| 18:45:19.931 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.972 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:19.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:19.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:20.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:20.009 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:20.012 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:20.012 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 9c db 69 98 47 10 bd c0 46 3a 02 00 10 |
| 18:45:20.033 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.073 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.073 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:20.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:20.110 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:20.112 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:20.112 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef a8 00 23 82 1d 07 30 d3 77 c3 77 70 47 |
| 18:45:20.134 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.173 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.187 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:20.210 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:20.210 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:20.212 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:20.212 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef b4 42 68 03 00 00 20 91 42 03 d3 9b 68 |
| 18:45:20.233 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.273 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.287 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:20.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:20.310 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:20.313 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:20.313 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef c0 8b 42 40 41 c0 b2 70 47 03 00 10 b5 |
| 18:45:20.334 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.334 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.376 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:20.412 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:20.412 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:20.416 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:20.416 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef cc 00 20 91 42 06 d8 5c 68 a1 42 03 d3 |
| 18:45:20.439 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.477 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.477 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:20.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:20.514 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:20.516 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:20.516 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef d8 9b 68 93 42 40 41 c0 b2 10 bd 43 68 |
| 18:45:20.537 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.577 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.591 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:20.614 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:20.614 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:20.616 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:20.616 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef e4 00 69 c9 1a 40 18 70 47 42 68 03 00 |
| 18:45:20.640 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.640 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.676 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:20.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:20.713 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:20.715 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:20.715 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef f0 89 1a c2 68 00 20 01 3a 8a 42 01 d3 |
| 18:45:20.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/4/0 L_Data.ind, low priority hop count 6, tpdu 00 80 14 24 |
| 18:45:20.759 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.759 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.798 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.798 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:20.836 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:20.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:20.839 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:20.839 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef fc 1b 69 58 5c |
| 18:45:20.860 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.890 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.890 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.903 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:20.926 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:20.926 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:20.928 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:20.928 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4200 with 256 bytes and CRC32 0xC64CDB65 |
| 18:45:20.929 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ee 00 01 00 42 00 00 65 db 4c c6 |
| 18:45:20.951 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.984 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:20.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:20.998 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:21.022 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:21.022 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:21.026 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 30,3% |
| 18:45:21.038 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 00 70 47 42 68 10 b5 89 1a c2 68 4c 1c |
| 18:45:21.048 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.048 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.086 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.101 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:21.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:21.129 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:21.154 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.179 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:21.180 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 0c 01 3a 03 00 00 20 94 42 04 d8 1a 69 |
| 18:45:21.229 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.229 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:21.266 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:21.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:21.292 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.299 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:21.300 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 18 53 5c 10 5d 1b 02 18 43 10 bd 43 68 |
| 18:45:21.346 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:21.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:21.381 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:21.385 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:21.385 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 24 00 69 c9 1a 40 18 70 47 42 68 03 00 |
| 18:45:21.405 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.447 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.447 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.459 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:21.482 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:21.482 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:21.518 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:21.518 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 30 89 1a c2 68 00 20 01 3a 8a 42 01 d3 |
| 18:45:21.528 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.528 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.566 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.566 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:21.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:21.603 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:21.626 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.650 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:21.650 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 3c 1b 69 58 5c 70 47 42 68 10 b5 89 1a |
| 18:45:21.696 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.709 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:21.732 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:21.733 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:21.756 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.777 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:21.777 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 48 c2 68 4c 1c 01 3a 03 00 00 20 94 42 |
| 18:45:21.822 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:21.859 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:21.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:21.875 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:21.875 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 54 04 d8 1a 69 53 5c 10 5d 1b 02 18 43 |
| 18:45:21.885 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.922 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.922 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:21.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:21.960 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:21.960 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:21.965 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:21.966 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 60 10 bd 10 b5 06 4b 00 2a 01 d1 98 47 |
| 18:45:21.983 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:21.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.024 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.043 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:22.060 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:22.060 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:22.076 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:22.077 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 6c 10 bd bf f3 4f 8f bf f3 6f 8f 72 b6 |
| 18:45:22.088 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.088 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.123 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.137 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:22.161 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:22.161 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:22.184 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.193 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:22.193 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 78 98 47 62 b6 f6 e7 c0 46 f1 1f ff 1f |
| 18:45:22.240 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.252 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:22.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:22.276 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:22.280 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:22.281 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 84 32 23 30 b5 8b b0 00 93 03 09 01 93 |
| 18:45:22.301 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.301 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.341 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.355 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:22.378 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:22.378 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:22.382 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:22.382 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 90 05 00 0b 09 0c 00 01 22 68 46 05 a9 |
| 18:45:22.404 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.404 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.443 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:22.479 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:22.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:22.482 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:22.483 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 9c 02 93 ff f7 e0 ff 05 9b db b2 05 93 |
| 18:45:22.502 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.544 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.544 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.557 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:22.581 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:22.581 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:22.584 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:22.584 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef a8 00 2b 0f d1 fa 21 3b 33 00 93 08 4b |
| 18:45:22.604 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.604 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.644 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.644 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.659 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:22.681 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:22.681 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:22.685 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:22.685 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef b4 89 00 18 68 01 95 02 94 02 f0 9c f9 |
| 18:45:22.705 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.749 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:22.784 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:22.784 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:22.789 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:22.789 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef c0 01 22 03 90 05 a9 68 46 ff f7 cb ff |
| 18:45:22.811 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.850 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.863 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:22.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:22.886 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:22.888 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:22.888 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef cc 05 98 c0 b2 0b b0 30 bd dc 00 00 10 |
| 18:45:22.911 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.949 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:22.950 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:22.963 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:22.987 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:22.987 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:22.990 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:22.990 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef d8 f0 b5 c3 17 1b 05 1b 0d c3 18 04 00 |
| 18:45:23.011 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.050 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.050 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:23.088 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:23.088 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:23.091 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:23.091 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef e4 0e 00 15 00 8b b0 1b 13 bf f3 4f 8f |
| 18:45:23.113 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.152 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.152 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:23.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:23.189 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:23.192 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:23.192 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef f0 bf f3 6f 8f 72 b6 32 22 68 46 00 92 |
| 18:45:23.213 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.213 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.252 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.252 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:23.289 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:23.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:23.292 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:23.292 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef fc 05 a9 00 22 |
| 18:45:23.314 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.314 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.341 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:23.379 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:23.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:23.386 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:23.401 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.434 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4300 with 256 bytes and CRC32 0x36E844BE |
| 18:45:23.437 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ee 00 01 00 43 00 00 be 44 e8 36 |
| 18:45:23.479 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:23.515 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:23.515 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:23.516 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 31,8% |
| 18:45:23.517 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 00 01 93 02 93 ff f7 ad ff 05 9f ff b2 |
| 18:45:23.537 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.578 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.580 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.591 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:23.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:23.615 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:23.617 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:23.617 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 0c 05 97 00 2f 04 d0 62 b6 05 98 c0 b2 |
| 18:45:23.637 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.637 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:23.714 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:23.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:23.725 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:23.725 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 18 0b b0 f0 bd 33 23 fa 21 00 93 0d 4b |
| 18:45:23.738 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.738 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.777 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.791 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:23.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:23.814 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:23.816 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:23.816 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 24 89 00 18 68 01 94 02 96 03 95 02 f0 |
| 18:45:23.836 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.876 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.890 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:23.913 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:23.913 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:23.923 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:23.923 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 30 63 f9 3a 00 04 90 05 a9 68 46 ff f7 |
| 18:45:23.938 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.981 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:23.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:23.993 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:24.016 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:24.016 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:24.042 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.059 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:24.059 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 3c 92 ff 05 9a 00 2a e6 d1 38 23 68 46 |
| 18:45:24.104 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.118 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:24.141 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:24.141 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:24.157 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:24.158 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 48 05 a9 00 93 01 94 02 96 03 95 ff f7 |
| 18:45:24.168 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.206 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:24.242 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:24.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:24.245 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:24.245 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 54 86 ff dc e7 dc 00 00 10 30 b5 0c 4d |
| 18:45:24.266 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.306 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:24.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:24.344 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:24.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.384 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:24.384 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 60 8b b0 a8 6c 00 28 11 d1 35 23 02 24 |
| 18:45:24.430 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:24.466 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:24.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:24.487 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:24.487 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 6c 00 93 01 22 68 46 05 a9 01 94 02 94 |
| 18:45:24.491 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.536 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.552 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:24.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:24.571 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:24.573 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:24.573 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 78 ff f7 73 ff 05 9b 07 2b 02 d0 02 34 |
| 18:45:24.599 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.599 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.636 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.636 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:24.673 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:24.673 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:24.678 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:24.679 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 84 80 2c f2 d1 20 03 a8 64 0b b0 30 bd |
| 18:45:24.701 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.701 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.741 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.753 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:24.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:24.776 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:24.780 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:24.795 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 90 34 02 00 10 f8 b5 04 00 ff f7 e0 ff |
| 18:45:24.803 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.848 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:24.884 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:24.884 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:24.887 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:24.887 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 9c 0c 4f c5 19 ff f7 dc ff c7 19 80 20 |
| 18:45:24.907 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.907 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.948 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:24.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:24.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:24.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:24.985 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:24.987 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:24.987 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef a8 e6 69 40 01 31 00 02 f0 23 f9 01 38 |
| 18:45:25.008 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.008 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.048 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.048 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:25.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:25.085 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:25.087 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:25.087 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef b4 70 43 38 18 a8 42 01 d2 00 20 f8 bd |
| 18:45:25.108 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.108 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.148 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.148 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.161 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:25.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:25.185 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:25.187 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:25.187 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef c0 e3 68 c3 18 01 3b 1b 78 ff 2b f8 d1 |
| 18:45:25.208 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.248 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:25.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:25.284 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:25.287 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:25.287 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef cc 80 1b f3 e7 00 f0 ff ff 02 4a 13 68 |
| 18:45:25.309 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.309 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.348 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.349 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:25.385 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:25.385 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:25.387 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:25.388 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef d8 01 33 13 60 70 47 c0 46 34 01 00 10 |
| 18:45:25.410 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.448 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:25.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:25.486 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:25.491 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:25.493 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef e4 03 68 70 b5 5b 68 0c 00 98 47 03 00 |
| 18:45:25.512 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.550 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.550 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.564 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:25.587 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:25.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:25.602 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:25.602 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef f0 02 1e 00 d0 02 78 01 20 21 12 03 33 |
| 18:45:25.611 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.649 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.649 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:25.687 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:25.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:25.688 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:25.688 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef fc e4 b2 82 42 |
| 18:45:25.710 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.738 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.738 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:25.776 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:25.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:25.779 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:25.798 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.798 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.782 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4400 with 256 bytes and CRC32 0x8EF738BA |
| 18:45:25.809 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ee 00 01 00 44 00 00 ba 38 f7 8e |
| 18:45:25.849 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.863 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:25.887 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:25.887 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:25.888 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 33,3% |
| 18:45:25.888 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 00 02 da 01 20 40 42 70 bd 1d 78 8d 42 |
| 18:45:25.910 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.910 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.949 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:25.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:25.963 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:25.986 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:25.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:25.998 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:25.998 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 0c 02 d1 5d 78 a5 42 f8 d0 01 30 02 33 |
| 18:45:26.009 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.048 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.048 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:26.086 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:26.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:26.100 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:26.100 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 18 f1 e7 43 68 10 b5 d8 6e 03 68 9b 6e |
| 18:45:26.110 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.148 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.148 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:26.185 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:26.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:26.188 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:26.188 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 24 98 47 10 bd 43 68 10 b5 d8 6e 03 68 |
| 18:45:26.211 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.211 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.248 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.249 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.262 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:26.286 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:26.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:26.297 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:26.297 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 30 04 69 9b 6d 98 47 00 78 20 18 10 bd |
| 18:45:26.311 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.34->6/1/12 L_Data.ind, low priority hop count 6, tpdu 00 80 07 bc |
| 18:45:26.331 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.331 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.371 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.385 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:26.408 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:26.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:26.434 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.434 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.454 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:26.454 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 3c 03 68 10 b5 5b 68 98 47 00 78 10 bd |
| 18:45:26.498 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:26.536 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:26.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:26.553 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:26.553 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 48 03 23 59 43 10 b5 89 b2 db 18 80 2a |
| 18:45:26.562 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.600 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.600 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:26.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:26.649 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:26.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.696 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:26.697 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 54 00 d1 04 3b 07 24 8c 40 8b 40 82 6a |
| 18:45:26.743 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.755 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:26.778 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:26.778 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:26.801 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:26.801 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 60 a2 43 82 62 82 6a 13 43 83 62 10 bd |
| 18:45:26.802 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.803 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.849 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.863 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:26.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:26.886 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:26.890 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:26.890 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 6c 03 23 30 b5 07 25 4b 43 9d 40 9a 40 |
| 18:45:26.910 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.910 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.953 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:26.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:26.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:26.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:26.988 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:26.992 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:26.992 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 78 44 69 49 00 ac 43 44 61 44 69 22 43 |
| 18:45:27.015 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.053 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:27.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:27.091 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:27.094 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:27.094 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 84 42 61 30 22 8a 40 c3 6b 93 43 c3 63 |
| 18:45:27.115 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.155 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:27.191 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:27.191 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:27.195 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:27.195 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 90 c3 6b c3 63 30 bd 70 b5 83 6a 18 68 |
| 18:45:27.216 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.216 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.254 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.268 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:27.291 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:27.291 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:27.294 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:27.294 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 9c 80 8a 04 0a 4c 70 88 70 ff 24 00 20 |
| 18:45:27.315 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.355 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.355 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.370 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:27.393 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:27.393 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:27.396 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:27.396 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef a8 85 b2 aa 42 1f d8 8c 54 d9 64 bf f3 |
| 18:45:27.416 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.457 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.457 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:27.494 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:27.494 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:27.497 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:27.497 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef b4 4f 8f bf f3 6f 8f 72 b6 1a 00 2c 32 |
| 18:45:27.518 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.560 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:27.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:27.595 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:27.598 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:27.599 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef c0 11 78 c8 b2 01 29 10 d1 05 31 11 70 |
| 18:45:27.620 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.659 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.660 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:27.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:27.696 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:27.699 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:27.699 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef cc da 1d 9b 69 d1 7f 1c 68 8a 00 23 00 |
| 18:45:27.720 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.760 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.760 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:27.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:27.797 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:27.801 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:27.801 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef d8 18 33 9b 18 18 60 03 22 20 00 ff f7 |
| 18:45:27.821 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.864 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:27.900 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:27.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:27.926 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.926 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.935 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:27.935 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef e4 c3 ff 00 23 a3 60 62 b6 70 bd 0d 5c |
| 18:45:27.982 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:27.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:27.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:28.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:28.017 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:28.038 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:28.039 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef f0 01 30 6c 40 d8 e7 70 b5 04 00 83 69 |
| 18:45:28.041 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.090 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:28.126 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:28.126 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:28.152 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.152 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.167 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:28.170 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef fc 81 22 1d 68 |
| 18:45:28.205 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:28.241 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:28.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:28.265 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.275 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:28.276 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4500 with 256 bytes and CRC32 0xE395DB95 |
| 18:45:28.276 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ee 00 01 00 45 00 00 95 db 95 e3 |
| 18:45:28.318 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.330 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:28.353 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:28.353 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:28.360 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 34,8% |
| 18:45:28.364 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 00 43 1d d9 7f 28 00 ff f7 9f ff e3 1d |
| 18:45:28.377 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.378 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.419 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.419 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.432 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:28.456 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:28.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:28.479 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.488 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:28.488 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 0c de 7f 28 00 31 00 02 22 ff f7 aa ff |
| 18:45:28.532 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.532 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.546 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:28.570 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:28.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:28.587 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:28.587 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 18 18 35 08 4b b6 00 ae 19 33 60 a3 1d |
| 18:45:28.592 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.637 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.637 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.649 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:28.672 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:28.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:28.698 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.707 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:28.707 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 24 db 7f 01 22 9b 00 ed 18 04 4b 2b 60 |
| 18:45:28.753 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.753 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.766 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:28.789 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:28.789 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:28.806 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:28.806 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 30 23 00 2c 33 1a 70 00 23 a3 62 70 bd |
| 18:45:28.815 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.854 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.867 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:28.891 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:28.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:28.895 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:28.895 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 3c fe ff 00 00 ff ff 00 00 10 21 f0 b5 |
| 18:45:28.915 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:28.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:28.969 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:28.993 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:28.993 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:29.009 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:29.009 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 48 43 1d db 7f 82 69 99 40 12 68 04 00 |
| 18:45:29.021 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.021 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.059 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.071 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:29.094 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:29.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:29.119 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.119 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.131 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:29.131 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 54 10 68 87 b0 01 42 22 d0 98 00 13 00 |
| 18:45:29.178 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:29.213 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:29.213 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:29.215 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:29.215 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 60 2c 33 1b 18 18 68 e3 1d dd 7f 13 00 |
| 18:45:29.237 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.276 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:29.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:29.313 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:29.315 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:29.315 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 6c ad 00 18 33 5b 19 e5 69 1e 68 6b 06 |
| 18:45:29.336 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.378 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.378 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.390 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:29.413 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:29.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:29.418 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:29.418 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 78 b9 4f 9b 0f 9b 00 df 59 1f 23 1d 40 |
| 18:45:29.440 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.440 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.481 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.481 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:29.516 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:29.516 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:29.519 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:29.520 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 84 1b 3b ab 40 1d 00 eb 59 00 2b 02 d0 |
| 18:45:29.541 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.542 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.581 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.581 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:29.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:29.619 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:29.621 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:29.621 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 90 11 60 07 b0 f0 bd 93 68 98 42 1b d8 |
| 18:45:29.643 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.643 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.682 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.682 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:29.719 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:29.719 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:29.721 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:29.721 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 9c 1b 1a 02 2b f3 d9 27 00 2c 37 3b 78 |
| 18:45:29.742 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.782 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.795 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:29.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:29.819 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:29.821 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:29.822 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef a8 d8 b2 0e 2b 01 d9 00 f0 84 fc 02 f0 |
| 18:45:29.841 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.883 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:29.919 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:29.920 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:29.922 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:29.922 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef b4 97 f9 11 00 23 00 2c 00 38 00 88 01 |
| 18:45:29.944 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.984 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:29.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:29.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:30.021 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:30.021 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:30.023 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:30.023 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef c0 3a 02 6a 02 d0 02 06 03 15 03 64 03 |
| 18:45:30.046 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.086 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:30.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:30.122 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:30.126 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:30.126 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef cc ed 03 10 04 42 04 55 04 f3 18 e1 e7 |
| 18:45:30.146 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.188 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.188 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.200 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:30.223 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:30.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:30.236 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:30.236 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef d8 a3 69 1a 68 63 1d d8 7f 10 23 83 40 |
| 18:45:30.251 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.290 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.290 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.302 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:30.325 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:30.325 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:30.349 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.349 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.361 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:30.361 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef e4 11 68 19 42 01 d1 00 f0 66 fc 00 23 |
| 18:45:30.408 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:30.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:30.443 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:30.461 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:30.462 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef f0 93 60 ff 22 a3 69 1b 68 1a 60 ca e7 |
| 18:45:30.476 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.514 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.528 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:30.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:30.551 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:30.571 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:30.572 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef fc a3 69 1b 68 |
| 18:45:30.578 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.607 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:30.644 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:30.644 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:30.670 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.688 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:30.689 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4600 with 256 bytes and CRC32 0x4678B6D5 |
| 18:45:30.689 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ee 00 01 00 46 00 00 d5 b6 78 46 |
| 18:45:30.731 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.731 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:30.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:30.770 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:30.773 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 36,4% |
| 18:45:30.779 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 1a 68 63 1d d9 7f 10 23 8b 40 1a 42 |
| 18:45:30.794 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.794 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.834 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.834 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:30.869 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:30.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:30.894 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.906 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:30.906 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c f1 d0 22 00 00 23 6f 32 23 64 07 3a |
| 18:45:30.952 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:30.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:30.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:30.988 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:30.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:31.014 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.031 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:31.031 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 18 d3 71 13 80 ff 22 a3 62 01 33 62 66 |
| 18:45:31.078 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.078 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:31.115 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:31.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:31.119 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:31.119 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 24 23 66 63 1d 02 93 db 7f 01 93 a3 69 |
| 18:45:31.140 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.178 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:31.217 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:31.219 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:31.242 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.254 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:31.254 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 30 01 98 1d 68 10 23 1a 00 82 40 29 68 |
| 18:45:31.299 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:31.336 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:31.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:31.362 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.371 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:31.371 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 3c 11 42 00 d0 14 e1 65 6e 26 6c 00 2d |
| 18:45:31.418 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.418 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:31.453 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:31.453 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:31.455 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:31.455 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 48 3b d1 23 6e 00 2b 3e d1 00 23 a3 62 |
| 18:45:31.476 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.516 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.516 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:31.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:31.553 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:31.555 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:31.555 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 54 06 33 3b 70 23 6c 01 2b 00 d0 f0 e0 |
| 18:45:31.576 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:31.653 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:31.653 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:31.654 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:31.654 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 60 23 00 6c 33 1a 78 00 2a 00 d1 ea e0 |
| 18:45:31.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.716 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:31.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:31.752 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:31.756 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:31.756 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 6c 00 22 1a 70 22 00 10 21 68 32 13 88 |
| 18:45:31.776 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.817 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.830 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:31.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:31.853 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:31.856 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:31.856 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 78 8b 43 13 80 e2 6d 00 2a 03 d0 63 6c |
| 18:45:31.875 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.916 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.916 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:31.930 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:31.954 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:31.954 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:31.958 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:31.958 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 84 cc 2b 00 d1 bc e0 21 6b 63 6b 99 42 |
| 18:45:31.978 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:31.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.018 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:32.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:32.056 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:32.058 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:32.058 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 90 00 db b7 e0 a1 6b e3 6b 99 42 00 db |
| 18:45:32.079 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.119 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.119 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:32.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:32.156 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:32.157 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:32.157 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 9c b2 e0 23 00 20 00 21 00 6a 33 6d 30 |
| 18:45:32.179 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.179 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.219 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.232 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:32.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:32.256 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:32.260 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:32.260 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef a8 6e 31 00 2a 00 d0 bb e0 04 22 1d 88 |
| 18:45:32.283 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.283 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.321 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:32.359 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:32.359 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:32.361 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:32.361 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef b4 2a 43 1a 80 00 23 03 70 01 33 0b 70 |
| 18:45:32.382 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.382 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.421 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.436 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:32.459 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:32.459 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:32.461 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:32.462 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef c0 35 e0 22 00 68 32 11 88 0b 43 13 80 |
| 18:45:32.485 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.524 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:32.559 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:32.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:32.583 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.588 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:32.588 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef cc c0 e7 06 23 a5 62 3b 70 07 2e bf dd |
| 18:45:32.632 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:32.670 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:32.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:32.688 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:32.688 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef d8 2c 22 23 6d 1b 78 93 43 90 2b 00 d0 |
| 18:45:32.694 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.694 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.736 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.750 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:32.773 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:32.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:32.775 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:32.775 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef e4 ad e0 20 68 03 68 5b 6b 98 47 b0 42 |
| 18:45:32.797 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.836 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:32.873 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:32.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:32.891 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:32.891 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef f0 b2 db 23 6d 19 79 da 78 09 02 11 43 |
| 18:45:32.900 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.901 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:32.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:32.974 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:32.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:32.983 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:32.983 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef fc 5b 79 49 ba |
| 18:45:32.996 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:32.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.025 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.025 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:33.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:33.068 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:33.086 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:33.090 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.106 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4700 with 256 bytes and CRC32 0x30F37AA0 |
| 18:45:33.107 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ee 00 01 00 47 00 00 a0 7a f3 30 |
| 18:45:33.148 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.149 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:33.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:33.185 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:33.190 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 37,9% |
| 18:45:33.202 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 00 22 68 89 b2 7f 2b 14 d9 4e 42 4e 41 |
| 18:45:33.210 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.211 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.256 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.268 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:33.291 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:33.291 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:33.295 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:33.295 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 0c 90 6b f6 b2 05 1e 04 d0 03 68 1b 68 |
| 18:45:33.319 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.358 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.370 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:33.393 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:33.393 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:33.420 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.444 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:33.444 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 18 98 47 c5 43 ed 0f 35 43 23 68 5b 6b |
| 18:45:33.491 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:33.526 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:33.526 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:33.551 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.552 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.565 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:33.566 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 24 1b 7d 5b 07 06 d5 00 2d 04 d1 4d 4e |
| 18:45:33.611 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:33.648 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:33.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:33.650 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:33.650 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 30 46 e0 93 8a 99 42 f3 d1 20 20 21 6d |
| 18:45:33.671 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.714 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.725 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:33.749 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:33.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:33.751 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:33.751 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 3c 0b 78 03 42 13 d0 a3 68 00 2b 4f d1 |
| 18:45:33.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.814 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:33.851 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:33.851 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:33.855 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:33.855 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 48 cc 22 a2 62 22 6c 21 6d 93 42 52 db |
| 18:45:33.876 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.877 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.915 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.916 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:33.930 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:33.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:33.953 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:33.955 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:33.955 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 54 a2 60 22 00 68 32 13 88 9b b2 e3 60 |
| 18:45:33.976 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:33.976 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.016 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.016 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.029 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:34.053 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:34.057 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:34.059 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:34.059 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 60 00 23 13 80 01 33 23 75 15 e0 62 68 |
| 18:45:34.082 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.122 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:34.157 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:34.157 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:34.159 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:34.160 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 6c 15 78 6b 40 83 43 e6 d1 20 6c 01 38 |
| 18:45:34.182 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.182 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.221 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.234 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:34.260 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:34.260 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:34.262 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:34.262 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 78 01 33 83 42 04 da ce 5c d5 5c ae 42 |
| 18:45:34.283 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.283 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.322 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:34.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:34.360 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:34.363 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:34.364 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 84 f8 d0 dc e7 83 42 da d1 a3 68 00 2b |
| 18:45:34.384 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.424 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.424 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.437 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:34.461 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:34.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:34.466 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:34.466 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 90 2a d1 cc 33 a3 62 23 68 40 21 5b 6b |
| 18:45:34.488 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.528 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.540 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:34.566 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:34.566 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:34.573 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:34.573 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 9c 1a 7d 01 23 52 08 93 43 22 6d 12 78 |
| 18:45:34.595 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.636 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.637 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.649 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:34.673 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:34.673 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:34.677 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:34.677 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef a8 0a 40 13 43 01 d0 00 23 a3 62 a3 6a |
| 18:45:34.696 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.739 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:34.774 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:34.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:34.798 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.807 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:34.807 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef b4 00 2b ba d0 05 23 b6 26 3b 70 f6 00 |
| 18:45:34.852 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.865 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:34.889 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:34.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:34.890 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:34.890 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef c0 e3 1d df 7f a3 69 39 00 1d 68 03 22 |
| 18:45:34.912 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.951 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:34.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:34.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:34.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:34.988 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:35.012 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.013 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.025 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:35.025 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef cc 28 00 ff f7 4d fe 02 9b 28 00 bf 00 |
| 18:45:35.070 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:35.107 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:35.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:35.108 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:35.108 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef d8 18 35 81 22 d9 7f ed 19 ff f7 32 fe |
| 18:45:35.130 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.169 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:35.206 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:35.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:35.218 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:35.218 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef e4 2e 60 04 e7 00 23 22 00 a3 62 68 32 |
| 18:45:35.231 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.269 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.283 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:35.306 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:35.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:35.308 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:35.308 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef f0 11 88 40 33 0b 43 13 80 cd e7 c9 5c |
| 18:45:35.329 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.369 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.383 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:35.406 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:35.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:35.415 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:35.415 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef fc 62 68 d1 54 |
| 18:45:35.428 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.428 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.461 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:35.494 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:35.495 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:35.516 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.517 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.546 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:35.558 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4800 with 256 bytes and CRC32 0xA0A64145 |
| 18:45:35.558 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ee 00 01 00 48 00 00 45 41 a6 a0 |
| 18:45:35.600 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.601 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:35.636 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:35.636 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:35.640 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 39,4% |
| 18:45:35.655 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 00 01 33 a3 e7 22 6b 63 6b 9a 42 03 da |
| 18:45:35.667 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.667 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.703 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:35.740 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:35.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:35.764 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.774 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:35.774 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 0c a2 6b e3 6b 9a 42 05 db 22 00 80 23 |
| 18:45:35.818 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:35.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:35.855 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:35.860 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:35.860 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 18 6a 32 11 88 0b 43 13 80 20 00 ff f7 |
| 18:45:35.880 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.880 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.924 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.924 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:35.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:35.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:35.961 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:35.986 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:35.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.005 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:36.005 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 24 3b f9 82 e7 62 6c c0 2a 00 d0 3f e7 |
| 18:45:36.050 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.050 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:36.087 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:36.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:36.089 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:36.089 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 30 1d 88 b0 3a 2a 43 1a 80 01 23 0b 4e |
| 18:45:36.111 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.150 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.150 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.164 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:36.187 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:36.187 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:36.189 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:36.189 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 3c 03 70 0b 70 be e7 23 00 6f 33 1a 78 |
| 18:45:36.210 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.210 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.250 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:36.287 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:36.287 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:36.290 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:36.290 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 48 00 2a 02 d0 00 22 1a 70 6d e7 22 00 |
| 18:45:36.310 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.311 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.351 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:36.388 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:36.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:36.389 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:36.389 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 54 80 23 68 32 11 88 0b 43 13 80 66 e7 |
| 18:45:36.410 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.450 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.450 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:36.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:36.487 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:36.492 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:36.492 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 60 d4 6d 00 00 e8 13 00 00 88 3c 00 00 |
| 18:45:36.514 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.554 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.566 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:36.590 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:36.590 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:36.593 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:36.593 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 6c 01 9b a8 68 9a 00 2b 00 2c 33 9b 18 |
| 18:45:36.613 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.658 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.658 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.667 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:36.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:36.691 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:36.692 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:36.692 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 78 e2 1d d1 7f 2a 00 1b 68 8e 00 18 32 |
| 18:45:36.716 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.717 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.754 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.769 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:36.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:36.792 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:36.794 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:36.794 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 84 92 19 83 42 1a d2 c3 1a 02 20 01 26 |
| 18:45:36.814 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.816 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.854 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:36.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:36.892 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:36.894 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:36.894 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 90 1b 18 68 60 6e 60 ab 60 8f 23 db 00 |
| 18:45:36.914 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.955 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:36.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:36.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:36.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:36.991 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:36.994 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:36.994 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 9c 13 60 28 00 03 22 ff f7 e3 fd 81 22 |
| 18:45:37.014 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.055 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:37.091 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:37.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:37.116 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.116 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.134 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:37.134 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef a8 28 00 01 99 ff f7 cc fd 04 23 3b 70 |
| 18:45:37.181 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.181 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.193 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:37.216 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:37.216 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:37.219 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:37.219 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef b4 00 23 66 65 63 64 a3 65 e6 65 98 e6 |
| 18:45:37.240 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.283 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.283 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:37.318 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:37.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:37.343 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.344 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.354 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:37.354 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef c0 16 68 80 19 e1 e7 01 21 e5 1d e8 7f |
| 18:45:37.399 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.400 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:37.437 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:37.437 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:37.439 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:37.439 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef cc a3 69 81 40 1b 68 1a 68 0a 40 51 1e |
| 18:45:37.460 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.460 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.501 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.501 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:37.537 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:37.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:37.556 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:37.556 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef d8 8a 41 04 a9 d2 b2 ca 70 ca 78 03 31 |
| 18:45:37.561 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.605 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.605 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.619 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:37.642 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:37.642 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:37.644 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:37.644 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef e4 00 2a 27 d0 18 33 80 00 1b 18 1b 68 |
| 18:45:37.664 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.664 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.706 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:37.742 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:37.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:37.765 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.765 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.778 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:37.778 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef f0 05 93 a3 6d 05 9a 18 00 44 30 90 42 |
| 18:45:37.826 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:37.861 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:37.861 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:37.863 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:37.864 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef fc 7a da 68 33 |
| 18:45:37.888 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.914 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:37.952 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:37.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:37.977 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:37.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:37.988 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:37.989 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4900 with 256 bytes and CRC32 0xFC43CA4D |
| 18:45:37.989 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ee 00 01 00 49 00 00 4d ca 43 fc |
| 18:45:38.031 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.043 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:38.066 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:38.066 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:38.069 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 40,9% |
| 18:45:38.069 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 00 a3 65 80 23 5b 00 9c 46 05 9a a3 6d |
| 18:45:38.094 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.133 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.133 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:38.169 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:38.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:38.187 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:38.187 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 0c 10 00 62 6d 56 00 01 96 1e 00 44 36 |
| 18:45:38.194 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.237 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.249 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:38.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:38.276 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:38.299 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.319 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:38.319 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 18 86 42 5c da 62 45 11 dc 66 6c 68 33 |
| 18:45:38.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.380 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:38.403 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:38.403 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:38.405 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:38.405 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 24 32 43 62 64 e2 6d a3 65 56 42 72 41 |
| 18:45:38.425 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.426 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.465 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:38.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:38.502 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:38.505 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:38.505 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 30 01 9b e2 65 63 65 e7 e7 62 1d d2 7f |
| 18:45:38.527 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.566 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.566 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:38.603 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:38.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:38.605 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:38.605 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 3c 2c 33 92 00 9b 18 d4 e7 05 9b 01 9b |
| 18:45:38.624 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.665 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.665 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:38.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:38.703 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:38.705 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:38.705 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 48 63 65 0b 78 00 2b 5f d0 63 6c 26 6c |
| 18:45:38.726 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.766 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.780 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:38.803 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:38.803 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:38.807 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:38.807 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 54 da b2 62 64 00 2e 08 d1 9b 07 06 d0 |
| 18:45:38.828 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.869 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:38.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:38.904 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:38.910 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:38.910 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 60 22 00 80 23 68 32 11 88 5b 00 0b 43 |
| 18:45:38.929 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.969 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:38.969 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:38.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:39.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:39.007 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:39.009 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:39.009 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 6c 13 80 20 68 03 68 5b 6b 98 47 86 42 |
| 18:45:39.030 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.070 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:39.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:39.107 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:39.108 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:39.108 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 78 43 da 23 6c 22 6d 61 6c 58 1c 20 64 |
| 18:45:39.129 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.129 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.170 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:39.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:39.207 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:39.210 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:39.210 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 84 d1 54 63 6e 62 6c 53 40 63 66 e3 6d |
| 18:45:39.231 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.272 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:39.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:39.307 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:39.309 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:39.309 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 90 00 2b 05 d1 21 00 08 22 68 31 08 88 |
| 18:45:39.331 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.332 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.370 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.370 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:39.406 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:39.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:39.408 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:39.408 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 9c 02 43 0a 80 22 6e 13 40 23 66 03 23 |
| 18:45:39.429 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.469 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.483 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:39.506 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:39.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:39.508 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:39.508 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef a8 3b 70 a3 69 e9 7f 1d 68 8a 00 2b 00 |
| 18:45:39.529 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.570 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.582 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:39.605 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:39.605 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:39.623 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:39.624 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef b4 18 33 9b 18 9a 22 52 00 1a 60 34 3a |
| 18:45:39.632 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:39.712 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:39.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:39.714 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:39.714 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef c0 28 00 ff 3a ff f7 52 fd 63 1d 81 22 |
| 18:45:39.735 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.777 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.789 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:39.812 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:39.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:39.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/5/2 L_Data.ind, low priority hop count 6, tpdu 00 80 0d 2d |
| 18:45:39.840 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:39.840 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef cc 28 00 d9 7f ff f7 3a fd 0d e6 05 9e |
| 18:45:39.857 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.857 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.899 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:39.934 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:39.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:39.959 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:39.960 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:39.982 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:39.982 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef d8 21 33 b3 42 b3 da 80 23 5b 00 9a 42 |
| 18:45:40.027 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.027 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:40.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:40.064 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:40.086 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.100 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:40.100 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef e4 af dc 22 00 68 32 16 88 fc 3b 33 43 |
| 18:45:40.148 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.148 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:40.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:40.183 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:40.203 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:40.203 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef f0 13 80 a8 e7 22 00 04 23 68 32 10 88 |
| 18:45:40.209 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.209 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.255 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:40.292 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:40.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:40.313 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:40.313 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef fc 03 43 13 80 |
| 18:45:40.317 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.346 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.361 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:40.384 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:40.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:40.408 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.414 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:40.431 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4A00 with 256 bytes and CRC32 0x00E01D09 |
| 18:45:40.431 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ee 00 01 00 4a 00 00 09 1d e0 00 |
| 18:45:40.474 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:40.509 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:40.509 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:40.512 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 42,4% |
| 18:45:40.512 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 00 a3 e7 22 00 20 23 68 32 11 88 0b 43 |
| 18:45:40.537 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.576 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.588 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:40.612 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:40.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:40.632 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:40.632 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 0c 13 80 be e7 82 23 05 9a db 00 9a 42 |
| 18:45:40.638 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.638 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.684 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.684 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:40.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:40.720 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:40.723 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:40.723 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 18 00 dc ea e5 22 00 01 23 68 32 11 88 |
| 18:45:40.745 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.745 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.787 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.787 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:40.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:40.823 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:40.827 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:40.827 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 24 0b 43 13 80 e3 e5 a3 69 1d 68 63 1d |
| 18:45:40.847 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.847 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.889 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.902 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:40.925 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:40.925 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:40.927 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:40.927 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 30 db 7f 2a 68 01 93 10 23 01 99 16 00 |
| 18:45:40.949 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:40.988 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:40.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.001 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:41.025 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:41.025 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:41.029 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:41.029 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 3c 8b 40 1e 40 1a 42 03 d0 00 23 a3 62 |
| 18:45:41.051 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.051 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.090 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:41.127 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:41.127 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:41.129 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:41.129 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 48 02 23 7a e1 2a 00 68 21 a6 64 a3 1d |
| 18:45:41.149 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.149 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.190 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.204 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:41.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:41.227 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:41.229 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:41.229 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 54 db 7f 18 32 9b 00 d3 18 19 60 e3 1d |
| 18:45:41.250 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.288 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.303 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:41.326 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:41.326 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:41.329 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:41.330 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 60 d9 7f 28 00 8b 00 d2 18 8b 23 13 60 |
| 18:45:41.351 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.391 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.391 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.404 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:41.428 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:41.428 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:41.439 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:41.439 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 6c 03 22 ff f7 fd fc 81 22 28 00 01 99 |
| 18:45:41.452 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.492 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:41.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:41.529 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:41.531 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:41.531 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 78 ff f7 e6 fc 23 00 6a 33 26 64 1e 80 |
| 18:45:41.554 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.593 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.606 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:41.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:41.630 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:41.632 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:41.632 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 84 07 23 3b 70 b3 e5 65 1d eb 7f 81 22 |
| 18:45:41.653 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.653 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.693 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:41.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:41.734 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:41.756 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.757 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.770 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:41.771 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 90 01 93 a3 69 01 99 1e 68 30 00 ff f7 |
| 18:45:41.817 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.817 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.830 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:41.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:41.853 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:41.880 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.881 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.895 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:41.895 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 9c d5 fc 10 23 01 99 32 68 8b 40 1a 42 |
| 18:45:41.939 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:41.939 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:41.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:41.977 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:41.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:42.001 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.001 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.006 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:42.006 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef a8 ce d1 22 6b 63 6b 9a 42 03 da a2 6b |
| 18:45:42.050 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.050 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:42.088 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:42.088 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:42.114 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:42.114 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef b4 e3 6b 9a 42 08 db 22 00 80 23 6a 32 |
| 18:45:42.114 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.114 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.166 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.175 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:42.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:42.199 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:42.203 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:42.203 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef c0 11 88 20 00 0b 43 13 80 fe f7 e8 ff |
| 18:45:42.225 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.225 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.264 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:42.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:42.301 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:42.304 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:42.304 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef cc e1 6c 00 29 00 d1 f2 e1 0f 22 4b 79 |
| 18:45:42.326 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.326 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.365 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:42.402 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:42.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:42.428 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.428 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.442 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:42.442 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef d8 13 40 08 33 a3 64 23 00 6e 33 1b 78 |
| 18:45:42.488 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.501 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:42.524 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:42.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:42.547 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.548 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:42.548 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef e4 00 2b 0b d0 20 23 0a 78 1a 42 07 d0 |
| 18:45:42.595 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.609 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:42.632 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:42.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:42.658 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.658 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.662 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:42.662 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef f0 9a 43 0a 70 a2 6c e1 6c 01 3a 88 5c |
| 18:45:42.709 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.709 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:42.744 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:42.744 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:42.769 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.769 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.793 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:42.793 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef fc 43 40 8b 54 |
| 18:45:42.827 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.840 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:42.864 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:42.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:42.887 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.887 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.898 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:42.917 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4B00 with 256 bytes and CRC32 0xD93BF342 |
| 18:45:42.917 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ee 00 01 00 4b 00 00 42 f3 3b d9 |
| 18:45:42.960 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:42.960 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:42.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:42.995 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:42.995 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:43.000 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 43,9% |
| 18:45:43.000 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 00 24 22 e3 6c 1b 78 13 40 93 42 22 d1 |
| 18:45:43.023 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.062 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.075 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:43.098 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:43.098 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:43.103 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:43.103 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 0c d0 23 5b 00 05 93 a3 69 05 99 1e 68 |
| 18:45:43.125 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.125 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.165 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:43.201 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:43.201 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:43.204 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:43.205 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 18 a3 1d 32 00 db 7f 18 32 9b 00 d3 18 |
| 18:45:43.227 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.280 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:43.303 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:43.303 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:43.304 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:43.304 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 24 19 60 e3 1d d9 7f 05 98 8b 00 d3 18 |
| 18:45:43.328 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.367 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.367 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:43.403 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:43.403 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:43.407 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:43.407 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 30 23 30 18 60 03 22 30 00 ff f7 98 fc |
| 18:45:43.426 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.481 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:43.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:43.505 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:43.508 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:43.508 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 3c 81 22 30 00 e9 7f ff f7 81 fc 22 00 |
| 18:45:43.530 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.571 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.584 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:43.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:43.607 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:43.612 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:43.612 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 48 00 23 6a 32 23 64 13 80 98 e7 68 23 |
| 18:45:43.634 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.673 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.673 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.686 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:43.710 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:43.710 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:43.712 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:43.712 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 54 dc e7 10 20 63 1d da 7f a3 69 90 40 |
| 18:45:43.734 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.734 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.775 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.789 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:43.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:43.811 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:43.814 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:43.814 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 60 1b 68 19 00 1d 68 18 31 05 42 1b d0 |
| 18:45:43.836 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.875 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:43.912 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:43.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:43.914 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:43.914 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 6c 92 00 2c 33 9b 18 a2 1d d2 7f 18 68 |
| 18:45:43.935 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.975 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:43.975 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:43.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:44.012 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:44.012 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:44.014 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:44.014 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 78 92 00 8a 18 11 68 07 39 81 42 02 d9 |
| 18:45:44.035 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.035 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.077 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.077 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:44.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:44.115 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:44.139 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->0/1/0 L_Data.ind, low priority hop count 6 repeat, tpdu 00 80 |
| 18:45:44.160 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:44.160 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 84 a1 6a 00 29 07 d0 19 68 13 68 10 3b |
| 18:45:44.207 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:44.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:44.244 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:44.248 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:44.248 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 90 8b 42 05 d9 a3 6a 00 2b 02 d0 ca 4b |
| 18:45:44.273 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.309 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.309 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:44.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:44.346 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:44.356 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:44.357 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 9c 13 60 53 e7 08 23 70 e7 1a 68 e3 1d |
| 18:45:44.368 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.368 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.410 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.422 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:44.445 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:44.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:44.448 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:44.448 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef a8 d9 7f 01 23 8b 40 1a 42 07 d0 08 23 |
| 18:45:44.470 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.510 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:44.546 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:44.546 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:44.571 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.588 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:44.588 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef b4 22 00 3b 70 6a 32 11 88 18 33 0b 43 |
| 18:45:44.597 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 0c 92 |
| 18:45:44.638 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.638 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:44.673 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:44.673 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:44.691 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:44.691 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef c0 13 80 a3 6a 00 2b 32 d0 a3 6a 80 21 |
| 18:45:44.698 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.736 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.737 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.750 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:44.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:44.778 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:44.803 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 16 54 |
| 18:45:44.822 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.825 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:44.825 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef cc 63 64 01 23 49 00 62 6c ff 2b 30 dd |
| 18:45:44.871 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.871 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.884 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:44.908 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:44.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:44.918 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:44.918 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef d8 01 23 63 65 08 33 3b 70 68 23 80 22 |
| 18:45:44.931 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.970 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:44.971 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:44.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:45.008 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:45.008 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:45.010 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:45.010 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef e4 61 6c 05 93 52 00 63 6d 5d 00 65 65 |
| 18:45:45.031 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.070 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.071 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:45.108 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:45.108 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:45.127 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:45.127 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef f0 0b 42 01 d0 93 42 26 dd a2 69 80 26 |
| 18:45:45.134 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.179 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.179 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.191 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:45.214 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:45.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:45.238 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.259 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:45.259 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef fc 10 68 62 1d |
| 18:45:45.294 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:45.330 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:45.330 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:45.342 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:45.342 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4C00 with 256 bytes and CRC32 0x7D748F03 |
| 18:45:45.342 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ee 00 01 00 4c 00 00 03 8f 74 7d |
| 18:45:45.354 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.392 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.392 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:45.428 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:45.428 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:45.432 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 45,4% |
| 18:45:45.432 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 00 d1 7f 02 00 05 9b 18 32 b6 00 01 92 |
| 18:45:45.452 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.494 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.495 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.506 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:45.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:45.530 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:45.532 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:45.532 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 0c 68 2b 1e dd 0a 23 81 22 3b 70 ff f7 |
| 18:45:45.553 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.593 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:45.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:45.631 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:45.634 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:45.635 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 18 17 fc b5 42 1e dc a3 1d db 7f 05 9a |
| 18:45:45.659 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.659 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.695 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.695 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.709 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:45.733 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:45.733 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:45.737 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:45.737 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 24 01 99 9b 00 23 3a cb 18 1c e0 23 6c |
| 18:45:45.756 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.797 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.798 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:45.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:45.835 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:45.840 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:45.840 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 e2 6c 59 1c 21 64 d3 5c c7 e7 1a 42 |
| 18:45:45.862 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.862 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.902 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.902 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:45.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:45.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:45.938 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:45.943 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:45.943 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 3c 01 d0 4a 40 62 64 5b 00 c5 e7 05 9b |
| 18:45:45.964 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:45.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.004 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.018 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:46.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:46.041 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:46.043 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:46.043 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 48 68 33 05 93 cd e7 80 22 ff f7 fa fb |
| 18:45:46.064 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.104 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.117 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:46.141 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:46.141 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:46.143 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:46.143 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 54 b5 42 e2 dd 0b 23 3b 70 a3 1d db 7f |
| 18:45:46.164 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.164 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.205 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:46.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:46.242 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:46.244 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:46.244 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 60 01 9a 9b 00 d3 18 97 4a 1a 60 a3 69 |
| 18:45:46.268 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.308 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:46.344 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:46.349 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:46.372 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.383 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:46.384 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 6c e2 1d 1b 68 d2 7f 05 99 18 33 92 00 |
| 18:45:46.428 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.428 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:46.466 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:46.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:46.468 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:46.468 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 78 9b 18 19 60 b9 e4 63 1d d9 7f a3 69 |
| 18:45:46.489 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.529 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.543 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:46.567 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:46.567 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:46.590 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.591 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.601 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:46.601 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 84 1d 68 10 23 8b 40 2a 68 1a 42 79 d0 |
| 18:45:46.646 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:46.683 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:46.683 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:46.707 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.707 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.733 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:46.733 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 90 8b 00 29 00 2c 31 c9 18 0e 68 68 21 |
| 18:45:46.778 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.778 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.791 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:46.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:46.815 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:46.834 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:46.834 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 9c 30 00 01 f0 31 fd 3d 29 00 d8 a4 e4 |
| 18:45:46.843 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.883 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:46.919 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:46.919 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:46.922 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:46.922 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef a8 a1 1d cb 7f 18 35 9b 00 ed 18 2b 68 |
| 18:45:46.942 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.942 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.981 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:46.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:46.995 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:47.019 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:47.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:47.041 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.047 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:47.047 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef b4 07 3b b3 42 62 d9 23 00 01 22 20 00 |
| 18:45:47.092 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.106 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:47.129 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:47.129 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:47.147 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:47.148 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef c0 6f 33 1a 70 40 23 6a 30 05 88 2b 43 |
| 18:45:47.156 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.195 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:47.231 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:47.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:47.240 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:47.241 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef cc 03 80 23 00 00 20 68 33 18 80 ff 23 |
| 18:45:47.254 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.294 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:47.331 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:47.331 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:47.357 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.363 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:47.363 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef d8 63 66 a3 6a 22 66 e2 65 83 42 30 d0 |
| 18:45:47.410 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.422 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:47.446 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:47.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:47.471 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.476 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:47.476 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef e4 a0 62 a3 69 1b 68 02 93 18 33 03 93 |
| 18:45:47.523 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.535 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:47.558 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:47.558 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:47.585 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.604 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:47.604 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef f0 cd 7f 68 21 ad 00 5d 19 28 68 21 30 |
| 18:45:47.649 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:47.686 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:47.686 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:47.689 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:47.689 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef fc 80 1b 01 f0 |
| 18:45:47.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.741 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:47.778 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:47.778 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:47.782 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:47.782 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4D00 with 256 bytes and CRC32 0xE6CE8E97 |
| 18:45:47.782 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ee 00 01 00 4d 00 00 97 8e ce e6 |
| 18:45:47.804 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.840 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.840 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:47.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:47.876 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:47.878 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 47,0% |
| 18:45:47.878 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 00 7b fc 63 6d 32 00 01 30 03 41 0a 20 |
| 18:45:47.898 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.898 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.939 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:47.939 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:47.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:47.975 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:47.975 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:47.979 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:47.979 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 0c 68 3a a2 65 62 6c 59 1e 0a 40 63 65 |
| 18:45:48.000 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.040 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:48.077 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:48.077 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:48.081 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:48.082 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 18 01 92 62 64 5b 10 00 2b 23 d1 e3 1d |
| 18:45:48.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.143 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.143 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:48.179 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:48.179 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:48.183 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:48.183 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 24 d9 7f 68 23 43 43 03 98 8a 00 9b 19 |
| 18:45:48.205 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.245 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.245 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:48.282 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:48.282 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:48.284 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:48.284 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 30 82 18 13 60 02 98 03 22 ff f7 98 fb |
| 18:45:48.306 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.346 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.359 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:48.383 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:48.383 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:48.387 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:48.387 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 3c 61 4b 2b 60 04 23 3b 70 2d e4 20 00 |
| 18:45:48.407 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.448 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.448 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:48.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:48.485 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:48.488 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:48.488 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 48 6e 30 02 70 22 6c 01 3a 22 64 22 6c |
| 18:45:48.509 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.509 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.549 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.549 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:48.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:48.585 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:48.589 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:48.589 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 54 9a 42 c6 dd e2 6c d0 5c 22 6d d0 54 |
| 18:45:48.611 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.650 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.664 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:48.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:48.687 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:48.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.723 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:48.723 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 60 62 6e 01 33 42 40 62 66 f3 e7 01 9a |
| 18:45:48.767 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.781 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:48.805 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:48.805 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:48.828 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.852 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:48.852 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 6c 01 38 13 42 04 d0 e1 6d 0a 00 51 42 |
| 18:45:48.898 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.898 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.910 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:48.933 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:48.933 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:48.958 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:48.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:48.960 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:48.960 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 78 51 41 e1 65 5b 10 ce e7 09 23 80 e6 |
| 18:45:49.009 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:49.044 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:49.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:49.068 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.089 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:49.089 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 84 0b 23 80 22 28 00 3b 70 ff f7 5c fb |
| 18:45:49.136 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.147 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:49.170 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:49.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:49.197 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.216 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:49.216 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 90 a3 69 21 6c 1a 68 a3 6c 18 32 99 42 |
| 18:45:49.262 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.262 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:49.301 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:49.301 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:49.310 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:49.310 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 9c 02 da a3 6a 00 2b 0a d0 0c 23 3b 70 |
| 18:45:49.325 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.325 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.364 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.377 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:49.401 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:49.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:49.404 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:49.404 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef a8 39 33 05 93 e3 1d db 7f 05 99 9b 00 |
| 18:45:49.426 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.466 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.477 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:49.501 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:49.501 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:49.502 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:49.502 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef b4 d2 18 11 60 1b e4 9c 23 5b 00 05 93 |
| 18:45:49.523 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.564 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:49.600 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:49.603 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:49.610 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:49.610 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef c0 31 3b ff 3b 3b 70 a3 1d db 7f 05 99 |
| 18:45:49.626 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.666 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:49.703 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:49.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:49.708 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:49.708 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef cc 9b 00 23 39 d3 18 19 60 ea e7 e2 1d |
| 18:45:49.731 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.731 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:49.806 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:49.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:49.832 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.846 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:49.846 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef d8 d5 7f a3 6a a2 69 16 68 00 2b 0c d0 |
| 18:45:49.894 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:49.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:49.929 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:49.933 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:49.933 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef e4 00 23 a3 62 06 33 3b 70 36 4b 05 93 |
| 18:45:49.953 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:49.995 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:49.995 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:50.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:50.031 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:50.036 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:50.036 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef f0 05 9b 18 36 ad 00 70 19 03 60 ff f7 |
| 18:45:50.056 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.096 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:50.133 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:50.133 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:50.135 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:50.135 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef fc fa fb 23 00 |
| 18:45:50.157 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.157 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.185 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:50.223 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:50.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:50.227 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:50.227 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4E00 with 256 bytes and CRC32 0x095E099E |
| 18:45:50.227 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ee 00 01 00 4e 00 00 9e 09 5e 09 |
| 18:45:50.247 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.247 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.285 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.285 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.297 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:50.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:50.320 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:50.323 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 48,5% |
| 18:45:50.323 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 00 01 22 6c 33 1a 70 31 4b 29 00 05 93 |
| 18:45:50.345 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.386 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.386 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.400 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:50.422 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:50.422 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:50.425 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:50.426 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 0c 0d 23 30 00 3b 70 ff f7 2b fb 23 00 |
| 18:45:50.445 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.485 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:50.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:50.523 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:50.528 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:50.528 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 18 6e 33 1b 78 00 2b e7 d0 23 00 6d 33 |
| 18:45:50.549 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.549 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.590 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.590 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:50.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:50.626 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:50.629 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:50.629 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 24 1b 78 00 2b 03 d0 a3 6b 01 33 a3 63 |
| 18:45:50.653 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.653 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.691 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.705 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:50.728 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:50.728 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:50.731 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:50.731 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 30 de e7 23 6b 01 33 23 63 da e7 0e 23 |
| 18:45:50.752 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.792 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:50.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:50.829 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:50.832 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:50.832 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 3c 3b 70 a3 69 81 22 1d 68 63 1d 28 00 |
| 18:45:50.853 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.892 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.907 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:50.930 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:50.930 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:50.932 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:50.933 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 48 d9 7f ff f7 fd fa e3 1d db 7f 18 35 |
| 18:45:50.953 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:50.993 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:50.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:51.030 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:51.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:51.056 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.057 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.078 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:51.078 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 54 9b 00 ed 18 1d 4b 2b 60 ff f7 c9 fb |
| 18:45:51.122 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:51.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:51.160 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:51.187 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.187 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.203 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:51.204 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 60 a3 69 1d 68 63 1d d9 7f 10 23 2a 68 |
| 18:45:51.251 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.262 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:51.286 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:51.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:51.305 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:51.305 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 6c 8b 40 10 00 18 40 1a 42 00 d0 e7 e5 |
| 18:45:51.311 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.312 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.352 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.352 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:51.389 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:51.389 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:51.398 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:51.398 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 78 23 00 01 22 6e 33 1a 70 22 00 02 3b |
| 18:45:51.413 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.451 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.451 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:51.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:51.489 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:51.513 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.536 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:51.536 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 84 18 70 08 23 6a 32 10 88 03 43 13 80 |
| 18:45:51.583 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:51.618 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:51.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:51.662 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.671 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:51.671 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 90 06 23 3b 70 e3 1d de 7f 2b 00 b2 00 |
| 18:45:51.716 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:51.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:51.763 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:51.787 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.787 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.797 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:51.798 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 9c 18 33 9b 18 09 4a 28 00 1a 60 81 22 |
| 18:45:51.843 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.857 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:51.880 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:51.880 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:51.898 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:51.898 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef a8 ff f7 ce fa 03 22 31 00 28 00 ff f7 |
| 18:45:51.907 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.907 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.943 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:51.943 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:51.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:51.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:51.981 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:52.005 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.005 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.016 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:52.016 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef b4 db fa ff f7 9c fb 20 00 ff f7 1b fb |
| 18:45:52.061 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.061 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.081 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:52.098 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:52.098 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:52.116 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:52.116 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef c0 ff f7 97 fb ff ff 00 00 e8 13 00 00 |
| 18:45:52.124 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.167 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.178 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:52.201 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:52.201 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:52.203 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:52.203 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef cc af 05 00 00 9a 06 00 00 10 b5 02 4b |
| 18:45:52.224 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.224 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.264 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.271 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:52.301 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:52.301 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:52.303 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:52.303 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef d8 d8 6c ff f7 33 fb 10 bd 34 02 00 10 |
| 18:45:52.324 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.325 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.365 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.378 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:52.401 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:52.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:52.403 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:52.403 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef e4 80 23 01 38 5b 04 98 42 0d d2 c0 21 |
| 18:45:52.425 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.464 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.464 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.477 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:52.501 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:52.501 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:52.503 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:52.503 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef f0 06 4a 09 06 50 60 06 48 03 6a 1b 02 |
| 18:45:52.525 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.525 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.564 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.564 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:52.602 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:52.602 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:52.604 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:52.604 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef fc 1b 0a 0b 43 |
| 18:45:52.626 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.654 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.654 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:52.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:52.692 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:52.694 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:52.694 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x4F00 with 256 bytes and CRC32 0xE194B173 |
| 18:45:52.695 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ee 00 01 00 4f 00 00 73 b1 94 e1 |
| 18:45:52.715 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.750 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.750 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:52.788 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:52.788 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:52.790 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 50,0% |
| 18:45:52.791 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 00 03 62 00 23 93 60 07 33 13 60 70 47 |
| 18:45:52.812 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.852 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.865 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:52.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:52.888 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:52.890 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:52.890 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 0c 10 e0 00 e0 00 ed 00 e0 80 20 70 b5 |
| 18:45:52.912 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.952 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:52.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:52.965 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:52.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:52.988 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:52.991 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:52.991 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 18 40 04 ff f7 e3 ff 00 f0 d7 f8 1f 21 |
| 18:45:53.011 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.057 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.057 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.074 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:53.088 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:53.088 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:53.090 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:53.090 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 24 01 22 0a 4b 80 24 1b 68 09 4d 19 40 |
| 18:45:53.113 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.152 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.153 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:53.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:53.189 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:53.191 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:53.192 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 30 8a 40 5b 06 08 49 9b 0f 9b 00 59 58 |
| 18:45:53.214 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.252 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.252 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:53.289 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:53.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:53.315 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.336 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:53.336 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 3c e4 03 90 00 ab 68 23 40 5e 42 73 41 |
| 18:45:53.382 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.382 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.395 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:53.418 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:53.418 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:53.444 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.463 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:53.463 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 48 5b 42 13 40 43 50 f7 e7 d4 00 00 10 |
| 18:45:53.509 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.509 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.521 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:53.545 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:53.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:53.569 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.569 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.589 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:53.589 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 54 10 e0 00 e0 d4 6d 00 00 f7 b5 43 06 |
| 18:45:53.633 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:53.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:53.670 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:53.693 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.698 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:53.698 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 60 9b 0f 00 93 40 4b c0 27 9c 46 62 46 |
| 18:45:53.743 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.757 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:53.780 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:53.780 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:53.804 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.824 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:53.825 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 6c 00 9b ff 01 9b 00 9d 58 1f 23 03 40 |
| 18:45:53.872 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:53.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:53.912 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:53.935 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:53.949 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:53.949 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 78 01 93 01 23 1e 00 01 9c f0 22 a6 40 |
| 18:45:53.994 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:53.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:54.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:54.030 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:54.033 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:54.033 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 84 80 24 12 02 0a 40 09 05 09 0d b6 b2 |
| 18:45:54.055 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.055 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.095 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.095 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.108 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:54.131 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:54.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:54.140 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:54.140 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 90 24 02 ba 42 10 d1 2b 59 33 43 2b 51 |
| 18:45:54.154 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.195 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.195 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:54.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:54.231 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:54.233 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:54.233 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 9c c3 05 07 d4 01 23 1f 22 44 12 14 40 |
| 18:45:54.253 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.254 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.296 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:54.331 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:54.331 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:54.350 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:54.351 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef a8 a3 42 4f d1 00 23 31 e0 01 23 80 22 |
| 18:45:54.355 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.355 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.397 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.398 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:54.434 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:54.434 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:54.458 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.483 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:54.483 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef b4 11 43 f4 e7 e0 27 ff 01 ba 42 06 d1 |
| 18:45:54.530 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.542 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:54.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:54.566 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:54.572 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:54.572 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef c0 2b 59 33 43 2b 51 c3 05 38 d4 06 23 |
| 18:45:54.591 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.634 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.635 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:54.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:54.669 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:54.673 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:54.673 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef cc e9 e7 2f 59 b7 43 2f 51 80 24 a4 01 |
| 18:45:54.693 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.735 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.748 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:54.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:54.771 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:54.775 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:54.775 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef d8 a2 42 29 d1 23 4a 90 42 03 d1 23 4b |
| 18:45:54.797 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.837 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:54.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:54.873 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:54.875 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:54.875 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef e4 00 22 1a 60 04 e0 22 4a 90 42 03 d1 |
| 18:45:54.896 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.936 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.936 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:54.950 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:54.973 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:54.973 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:54.976 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:54.976 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef f0 1f 4a 13 60 02 23 0d e0 1f 4a 90 42 |
| 18:45:54.997 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:54.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.037 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.037 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.050 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:55.074 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:55.074 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:55.078 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:55.078 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef fc 01 d1 1f 4b |
| 18:45:55.100 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.128 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.141 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:55.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:55.166 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:55.168 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:55.168 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5000 with 256 bytes and CRC32 0x245913AC |
| 18:45:55.169 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ee 00 01 00 50 00 00 ac 13 59 24 |
| 18:45:55.189 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.224 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.224 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:55.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:55.261 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:55.264 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 51,5% |
| 18:45:55.264 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 00 f0 e7 1f 4a 90 42 03 d0 c3 05 19 d4 |
| 18:45:55.288 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.327 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.327 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:55.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:55.363 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:55.366 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:55.366 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 0c 07 23 c8 e7 1a 4a 13 60 0c 22 00 98 |
| 18:45:55.387 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.387 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.427 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.440 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:55.464 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:55.464 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:55.467 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:55.467 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 18 0b 43 42 43 01 98 12 18 52 00 62 44 |
| 18:45:55.488 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.528 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.528 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.541 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:55.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:55.565 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:55.589 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.611 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:55.611 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 24 12 8a 17 48 12 18 92 00 13 60 f7 bd |
| 18:45:55.657 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:55.693 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:55.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:55.718 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.730 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:55.730 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 30 c0 24 02 23 a4 01 a2 42 b0 d1 b2 e7 |
| 18:45:55.776 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.789 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:55.812 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:55.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:55.835 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.841 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:55.841 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 3c 06 23 b8 e7 07 23 b6 e7 01 23 e5 e7 |
| 18:45:55.886 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:55.923 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:55.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:55.947 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:55.947 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 48 03 23 e3 e7 84 13 14 40 a3 42 f7 d0 |
| 18:45:55.948 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:55.995 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:55.995 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.008 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:56.031 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:56.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:56.058 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.062 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:56.062 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 54 c4 14 14 40 9c 42 cb d0 00 16 10 40 |
| 18:45:56.108 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.108 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.121 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:56.144 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:56.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:56.167 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.175 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:56.175 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 60 83 42 f1 d0 ff f7 56 ff d4 6d 00 00 |
| 18:45:56.221 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.234 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:56.257 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:56.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:56.269 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:56.269 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 6c 02 c2 3a 00 c0 40 04 40 63 82 3d 00 |
| 18:45:56.283 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.283 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.320 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.334 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:56.357 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:56.357 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:56.384 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.390 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:56.391 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 78 25 42 3c 00 d0 40 04 40 49 c2 01 00 |
| 18:45:56.437 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.437 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:56.473 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:56.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:56.497 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:56.497 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 84 00 10 01 10 f8 b5 05 00 00 26 1f 27 |
| 18:45:56.499 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.546 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:56.582 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:56.582 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:56.606 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:56.606 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 90 41 63 02 63 2b 6b 9e 42 00 d3 f8 bd |
| 18:45:56.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/3/3 L_Data.ind, low priority hop count 6, tpdu 00 80 14 c6 |
| 18:45:56.629 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.668 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:56.705 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:56.705 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:56.709 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:56.709 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 9c c0 21 0a 4a b3 00 d4 58 c9 01 20 00 |
| 18:45:56.730 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.730 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.769 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.769 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.784 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:56.807 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:56.807 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:56.832 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:56.832 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef a8 ff f7 58 ff 22 00 64 06 06 4b a4 0f |
| 18:45:56.834 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.834 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.881 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.881 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:56.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:56.917 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:56.919 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:56.919 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef b4 a4 00 e1 58 04 23 3a 40 93 40 00 22 |
| 18:45:56.941 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.980 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:56.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:56.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:57.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:57.017 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:57.019 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:57.019 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef c0 01 36 5a 50 e6 e7 c0 46 84 6e 00 00 |
| 18:45:57.039 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.082 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.095 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:57.117 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:57.117 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:57.120 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:57.120 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef cc d4 6d 00 00 c0 21 10 b5 05 4c c9 01 |
| 18:45:57.142 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.182 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.182 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.195 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:57.219 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:57.219 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:57.221 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:57.221 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef d8 20 68 ff f7 3f ff 80 21 60 68 49 01 |
| 18:45:57.244 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.244 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.282 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.283 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:57.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:57.319 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:57.322 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:57.322 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef e4 ff f7 3a ff 10 bd c0 46 d4 00 00 10 |
| 18:45:57.344 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.344 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.384 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.397 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:57.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:57.421 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:57.423 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:57.423 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef f0 70 b5 0d 4c 06 00 a5 68 01 20 ad b2 |
| 18:45:57.444 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.484 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:57.521 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:57.521 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:57.544 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.544 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.546 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:57.546 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef fc 02 2e 06 d9 |
| 18:45:57.580 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.581 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:57.618 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:57.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:57.623 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:57.636 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5100 with 256 bytes and CRC32 0xCAB3B2A1 |
| 18:45:57.636 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ee 00 01 00 51 00 00 a1 b2 b3 ca |
| 18:45:57.646 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.679 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.693 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:57.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:57.717 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:57.723 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 53,0% |
| 18:45:57.735 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 00 0a 4b 0b 49 18 68 01 f0 77 fa 02 3e |
| 18:45:57.746 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.746 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.783 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.798 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:57.821 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:57.821 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:57.823 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:57.824 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 0c 70 43 00 28 00 dc 70 bd a3 68 9a b2 |
| 18:45:57.845 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.887 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.887 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:57.923 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:57.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:57.929 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:57.929 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 18 ab 1a 01 d5 61 68 5b 18 15 00 c0 1a |
| 18:45:57.950 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.950 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:57.987 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:57.987 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.001 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:58.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:58.024 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:58.049 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.049 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.080 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:58.080 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 24 f3 e7 c0 46 10 e0 00 e0 dc 00 00 10 |
| 18:45:58.125 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.125 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:45:58.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:45:58.162 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:45:58.186 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.186 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.194 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:58.194 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 30 40 42 0f 00 14 4b 70 b5 1a 68 04 00 |
| 18:45:58.240 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.253 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:45:58.276 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:45:58.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:45:58.302 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.302 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.333 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:58.333 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 3c d2 07 04 d4 1b 68 9b 07 01 d4 ff f7 |
| 18:45:58.379 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.392 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:45:58.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:45:58.416 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:45:58.441 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.441 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.478 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:58.478 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 48 e5 fe 10 4b 5b 68 db 05 0e d0 fa 25 |
| 18:45:58.523 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:45:58.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:45:58.561 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:45:58.571 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:58.571 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 54 2d 01 04 2c 05 d8 fa 20 80 00 60 43 |
| 18:45:58.586 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.586 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.626 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.626 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.640 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:45:58.663 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:45:58.663 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:45:58.673 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:58.673 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 60 ff f7 c6 ff 70 bd 28 00 ff f7 c2 ff |
| 18:45:58.686 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.686 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.729 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:45:58.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:45:58.768 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:45:58.789 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.789 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.822 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:58.822 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 6c 04 3c f2 e7 07 4b 1a 68 00 2c f5 d0 |
| 18:45:58.868 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.880 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:45:58.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:45:58.904 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:45:58.929 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:58.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:58.959 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:58.959 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 78 19 68 91 42 01 d1 30 bf fa e7 1a 68 |
| 18:45:59.006 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.018 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:45:59.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:45:59.041 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:45:59.065 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.065 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.084 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:59.085 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 84 01 3c f5 e7 10 e0 00 e0 00 ed 00 e0 |
| 18:45:59.129 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.129 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.143 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:45:59.166 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:45:59.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:45:59.174 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:59.174 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 90 34 01 00 10 f8 b5 04 00 0e 00 00 25 |
| 18:45:59.188 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.188 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.230 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:45:59.266 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:45:59.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:45:59.291 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.291 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.307 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:59.308 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 9c 01 27 63 68 ab 42 00 d8 f8 bd 23 68 |
| 18:45:59.354 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.367 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:45:59.390 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:45:59.390 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:45:59.414 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.414 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.442 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:59.442 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef a8 29 00 20 00 9b 68 98 47 00 28 15 d0 |
| 18:45:59.489 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.501 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:45:59.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:45:59.524 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:45:59.551 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.573 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:59.573 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef b4 3a 00 63 68 9a 40 e3 68 01 3a 13 40 |
| 18:45:59.619 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.619 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.635 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:45:59.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:45:59.656 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:45:59.679 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.694 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:59.694 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef c0 a2 68 9a 42 0c d0 14 2e 0a d9 14 20 |
| 18:45:59.740 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:45:59.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:45:59.776 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:45:59.780 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:59.780 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef cc ff f7 b2 ff 23 68 20 00 5b 68 98 47 |
| 18:45:59.802 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.802 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.842 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:45:59.878 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:45:59.878 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:45:59.882 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:59.882 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef d8 30 00 14 38 ff f7 aa ff 01 35 dc e7 |
| 18:45:59.904 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.944 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:45:59.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:45:59.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:45:59.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:45:59.980 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:45:59.984 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:45:59.984 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef e4 f7 b5 01 24 22 00 1a 4d 01 90 2b 69 |
| 18:46:00.007 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.045 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:00.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:00.082 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:00.084 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:00.084 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef f0 6f 69 9a 40 ab 69 01 3a 13 40 9f 42 |
| 18:46:00.107 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.146 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.158 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:00.182 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:00.182 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:00.187 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:00.187 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef fc 21 d0 f4 21 |
| 18:46:00.209 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.210 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.239 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.252 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:00.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:00.274 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:00.276 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:00.276 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5200 with 256 bytes and CRC32 0xE54D1F67 |
| 18:46:00.276 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ee 00 01 00 52 00 00 67 1f 4d e5 |
| 18:46:00.298 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.298 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.334 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.334 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:00.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:00.371 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:00.376 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 54,5% |
| 18:46:00.377 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 00 5f 40 15 4b ff 31 18 68 00 26 03 68 |
| 18:46:00.396 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.396 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.439 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.451 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:00.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:00.474 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:00.478 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:00.478 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 0c 1b 68 98 47 03 78 00 93 3c 42 10 d0 |
| 18:46:00.499 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.540 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.540 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:00.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:00.576 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:00.578 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:00.578 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 18 01 23 b3 40 6a 69 1a 40 00 9b 1c 42 |
| 18:46:00.599 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.599 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.639 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:00.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:00.676 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:00.679 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:00.680 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 24 13 d1 53 1e 9a 41 31 00 0b 48 03 23 |
| 18:46:00.699 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.699 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.740 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.755 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:00.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:00.781 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:00.796 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:00.797 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 30 00 68 d2 b2 0c 31 fe f7 89 fc 01 36 |
| 18:46:00.807 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.807 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.843 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.857 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:00.881 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:00.881 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:00.883 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:00.883 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 3c 64 00 08 2e e8 d1 28 00 01 99 0c 30 |
| 18:46:00.905 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.905 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.945 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:00.945 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:00.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:00.981 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:00.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:01.004 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.008 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:01.009 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 48 ff f7 a4 ff f7 bd 53 42 5a 41 ea e7 |
| 18:46:01.054 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.067 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:01.090 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:01.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:01.093 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:01.093 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 54 34 02 00 10 f4 01 00 10 f8 01 00 10 |
| 18:46:01.114 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.114 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.155 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:01.190 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:01.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:01.214 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.234 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:01.234 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 60 f0 b5 07 00 0c 00 8d b0 b8 6a fe f7 |
| 18:46:01.280 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.280 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:01.316 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:01.316 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:01.321 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:01.321 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 6c 6b f9 00 28 fa d0 b8 6d 00 28 03 d0 |
| 18:46:01.341 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.342 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.380 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.380 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:01.418 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:01.418 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:01.443 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.457 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:01.457 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 78 03 68 21 00 1b 68 98 47 3d 6d 2b 7d |
| 18:46:01.503 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.515 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:01.538 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:01.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:01.563 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.584 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:01.584 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 84 00 2b 69 d0 bf f3 4f 8f bf f3 6f 8f |
| 18:46:01.631 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.631 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.643 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:01.666 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:01.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:01.669 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:01.669 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 90 72 b6 28 00 ff f7 7e f8 04 00 ff f7 |
| 18:46:01.691 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.730 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.730 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:01.766 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:01.766 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:01.791 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.791 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.808 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:01.808 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 9c 5f f8 51 4b ee 69 c3 18 80 20 31 00 |
| 18:46:01.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/2/1 L_Data.ind, low priority hop count 6, tpdu 00 80 1c 26 |
| 18:46:01.855 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:01.892 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:01.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:01.904 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:01.904 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef a8 40 01 01 93 01 f0 a4 f9 01 38 70 43 |
| 18:46:01.915 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:01.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:01.969 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:01.992 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:01.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:02.000 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:02.000 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef b4 01 9b 18 18 84 42 3e d1 ff f7 4e f8 |
| 18:46:02.019 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.057 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:02.093 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:02.093 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:02.095 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:02.095 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef c0 48 4b c4 18 ff f7 4a f8 46 4b c0 18 |
| 18:46:02.117 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.117 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.156 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:02.193 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:02.193 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:02.195 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:02.195 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef cc 84 42 38 d1 32 23 e6 17 36 05 36 0d |
| 18:46:02.217 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.217 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.257 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.271 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:02.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:02.294 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:02.297 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:02.297 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef d8 a6 19 36 13 01 22 07 a9 02 a8 02 93 |
| 18:46:02.318 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.358 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:02.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:02.394 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:02.396 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:02.396 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef e4 03 96 04 96 fe f7 bb ff 07 9b db b2 |
| 18:46:02.417 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.418 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.458 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:02.494 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:02.494 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:02.496 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:02.496 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef f0 07 93 00 2b 1b d1 fa 21 34 33 02 93 |
| 18:46:02.517 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.517 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.557 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.557 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:02.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:02.594 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:02.596 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:02.597 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef fc 3a 4b 89 00 |
| 18:46:02.617 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.617 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.646 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.660 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:02.683 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:02.683 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:02.687 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:02.688 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5300 with 256 bytes and CRC32 0x04ACE574 |
| 18:46:02.688 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ee 00 01 00 53 00 00 74 e5 ac 04 |
| 18:46:02.708 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.708 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.744 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.745 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.757 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:02.781 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:02.781 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:02.783 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 56,0% |
| 18:46:02.783 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 00 18 68 03 96 04 96 01 f0 77 f9 01 22 |
| 18:46:02.806 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.845 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.857 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:02.881 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:02.881 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:02.883 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:02.883 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 0c 05 90 07 a9 02 a8 fe f7 a6 ff 07 9b |
| 18:46:02.905 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.905 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.943 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:02.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:02.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:02.981 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:02.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:02.985 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:02.985 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 18 00 2b 08 d1 35 33 01 22 07 a9 02 a8 |
| 18:46:03.017 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.045 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:03.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:03.082 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:03.110 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.119 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:03.130 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 24 02 93 03 96 04 96 fe f7 9a ff 07 9b |
| 18:46:03.174 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.188 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:03.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:03.217 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:03.239 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.281 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:03.281 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 30 db b2 00 2b 05 d0 ff f7 ed fd 00 2c |
| 18:46:03.325 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.325 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:03.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:03.363 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:03.380 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:03.380 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 3c be d0 a4 19 c0 e7 00 26 2b 69 ea 68 |
| 18:46:03.390 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.390 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.430 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:03.465 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:03.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:03.470 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:03.470 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 48 9b 18 01 3b 1e 70 ea 68 96 42 35 d3 |
| 18:46:03.494 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.494 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.531 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.532 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:03.569 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:03.569 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:03.580 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:03.581 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 54 00 23 2b 75 ab 61 62 b6 7c 6d 00 2c |
| 18:46:03.594 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.631 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.631 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:03.668 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:03.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:03.683 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:03.683 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 60 2b d0 22 4d 63 5d 00 2b 0f d0 a0 68 |
| 18:46:03.694 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.694 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.735 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:03.770 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:03.770 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:03.809 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:03.810 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 6c 01 00 fe f7 89 ff 00 28 df d1 80 22 |
| 18:46:03.814 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.860 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.874 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:03.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:03.897 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:03.921 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.921 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.930 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:03.930 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 78 21 00 60 68 52 00 14 31 fe f7 aa ff |
| 18:46:03.978 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:03.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:03.989 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:04.012 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:04.012 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:04.039 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.056 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:04.056 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 84 00 28 d6 d1 60 55 19 4d 63 5d 00 2b |
| 18:46:04.104 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:04.138 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:04.138 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:04.141 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:04.141 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 90 13 d0 85 26 b6 00 a0 59 01 00 fe f7 |
| 18:46:04.160 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.203 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.203 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:04.237 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:04.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:04.261 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.277 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:04.278 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 9c 73 ff 00 28 c9 d1 21 00 80 22 a0 59 |
| 18:46:04.327 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.327 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.339 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:04.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:04.363 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:04.365 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:04.365 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef a8 15 31 00 02 52 00 ff 31 fe f7 92 ff |
| 18:46:04.386 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.386 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.426 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.426 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:04.463 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:04.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:04.467 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:04.467 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef b4 00 28 be d1 60 55 01 20 0d b0 f0 bd |
| 18:46:04.489 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.529 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.530 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.542 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:04.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:04.565 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:04.570 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:04.570 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef c0 80 23 92 1b db 00 9a 42 00 dd 1a 00 |
| 18:46:04.593 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.631 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:04.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:04.668 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:04.671 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:04.671 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef cc 29 69 a0 19 89 19 fe f7 81 ff 00 28 |
| 18:46:04.692 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.734 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.734 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.745 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:04.768 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:04.769 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:04.773 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:04.773 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef d8 ad d1 80 23 db 00 f6 18 b5 e7 c0 46 |
| 18:46:04.793 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.834 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.834 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:04.871 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:04.871 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:04.874 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:04.874 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef e4 00 f0 ff ff dc 00 00 10 22 02 00 00 |
| 18:46:04.895 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.895 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:04.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:04.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:04.973 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:04.975 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:04.975 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef f0 21 02 00 00 01 21 10 b5 ff f7 32 ff |
| 18:46:04.995 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:04.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.035 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.035 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.049 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:05.072 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:05.072 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:05.075 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:05.075 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef fc bf f3 4f 8f |
| 18:46:05.096 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.125 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.125 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:05.163 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:05.163 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:05.166 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:05.166 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5400 with 256 bytes and CRC32 0x31B93B3F |
| 18:46:05.166 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ee 00 01 00 54 00 00 3f 3b b9 31 |
| 18:46:05.188 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.188 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.224 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.224 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:05.260 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:05.260 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:05.262 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 57,6% |
| 18:46:05.262 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 00 02 4b 03 4a da 60 bf f3 4f 8f fe e7 |
| 18:46:05.283 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.283 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.323 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:05.360 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:05.360 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:05.362 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:05.362 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 0c 00 ed 00 e0 04 00 fa 05 80 20 70 b5 |
| 18:46:05.383 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.383 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.425 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.438 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:05.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:05.461 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:05.485 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.512 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:05.512 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 18 40 04 ff f7 63 fd ff f7 57 fe 1f 21 |
| 18:46:05.560 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:05.594 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:05.594 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:05.598 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:05.599 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 24 01 22 0a 4b 80 24 1b 68 09 4d 19 40 |
| 18:46:05.622 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.622 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.662 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:05.696 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:05.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:05.721 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.735 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:05.735 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 30 8a 40 5b 06 08 49 9b 0f 9b 00 59 58 |
| 18:46:05.780 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.780 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.794 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:05.817 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:05.817 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:05.824 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:05.824 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 3c a4 03 90 00 ab 68 23 40 5e 42 73 41 |
| 18:46:05.841 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.881 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.881 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:05.917 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:05.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:05.941 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:05.945 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:05.945 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 48 5b 42 13 40 43 50 f7 e7 d4 00 00 10 |
| 18:46:05.990 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:05.990 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:06.027 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:06.027 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:06.029 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:06.029 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 54 10 e0 00 e0 d4 6d 00 00 f0 b5 04 00 |
| 18:46:06.050 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.050 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.090 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:06.127 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:06.127 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:06.151 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.151 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.163 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:06.163 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 60 0e 00 87 b0 07 28 4c d8 01 27 87 40 |
| 18:46:06.214 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.226 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:06.250 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:06.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:06.273 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.274 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:06.275 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 6c 57 4b 58 4d 5b 69 28 68 3b 40 02 93 |
| 18:46:06.323 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.335 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:06.359 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:06.359 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:06.383 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.383 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.408 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:06.408 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 78 56 4b 61 1c 04 93 49 10 03 68 fa 31 |
| 18:46:06.455 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.455 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.467 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:06.490 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:06.490 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:06.514 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:06.514 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 84 1b 68 ff 31 98 47 f5 21 03 78 28 68 |
| 18:46:06.516 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.131->1/2/41 L_Data.ind, low priority hop count 6, tpdu 00 80 19 4c |
| 18:46:06.538 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.578 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.591 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:06.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:06.618 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:06.643 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.643 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.657 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:06.657 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 90 01 93 03 68 49 00 1b 68 98 47 ec 21 |
| 18:46:06.707 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.708 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:06.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:06.739 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:06.742 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:06.742 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 9c 03 78 28 68 3b 40 03 93 03 68 ff 31 |
| 18:46:06.763 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.763 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.803 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.817 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:06.840 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:06.840 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:06.843 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:06.843 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef a8 1b 68 98 47 21 00 03 78 28 68 05 93 |
| 18:46:06.864 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.903 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.903 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:06.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:06.940 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:06.940 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:06.943 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:06.943 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef b4 03 68 e3 31 1b 68 ff 31 98 47 21 00 |
| 18:46:06.964 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:06.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.005 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.005 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.018 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:07.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:07.041 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:07.044 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:07.044 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef c0 03 78 28 68 00 93 03 68 db 31 1b 68 |
| 18:46:07.065 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.066 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.107 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.119 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:07.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:07.142 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:07.146 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:07.146 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef cc ff 31 98 47 01 23 01 78 1c 42 02 d1 |
| 18:46:07.167 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.207 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:07.244 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:07.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:07.245 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:07.246 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef d8 01 9b 1b 09 01 93 0f 23 01 98 3d 4a |
| 18:46:07.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.307 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:07.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:07.343 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:07.345 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:07.345 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef e4 18 40 83 00 d2 18 00 9b 15 6f 00 2b |
| 18:46:07.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.419 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:07.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:07.443 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:07.445 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:07.445 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef f0 09 d1 00 29 0f d1 39 4b e4 00 1c 19 |
| 18:46:07.465 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.519 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:07.543 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:07.543 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:07.546 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:07.546 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef fc 00 23 e3 64 |
| 18:46:07.568 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.568 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.596 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.596 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:07.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:07.634 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:07.637 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:07.638 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5500 with 256 bytes and CRC32 0x89098C58 |
| 18:46:07.638 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ee 00 01 00 55 00 00 58 8c 09 89 |
| 18:46:07.658 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.658 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.697 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.708 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:07.730 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:07.731 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:07.760 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.760 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.737 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 59,1% |
| 18:46:07.768 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 00 23 65 07 b0 f0 bd 03 9b 00 2b 1d d1 |
| 18:46:07.814 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:07.850 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:07.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:07.875 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.900 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:07.901 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 0c 00 2e 10 d0 00 29 f0 d0 04 e0 03 9b |
| 18:46:07.952 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:07.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:07.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:07.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:07.983 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:08.006 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.013 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:08.013 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 18 00 2b 31 d1 00 2e ea d0 00 22 2e 48 |
| 18:46:08.059 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.071 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:08.095 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:08.095 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:08.117 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.118 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.147 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:08.148 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 24 69 43 e4 00 03 19 1a 65 4c 30 00 19 |
| 18:46:08.193 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.193 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:08.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:08.231 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:08.233 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:08.234 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 30 07 e0 2a 48 e4 00 03 19 18 00 00 99 |
| 18:46:08.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.36->13/3/0 L_Data.ind, low priority hop count 6, tpdu 00 80 00 00 |
| 18:46:08.276 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.315 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:08.352 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:08.352 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:08.354 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:08.354 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 3c de 64 69 43 50 30 fd f7 65 ff dc e7 |
| 18:46:08.376 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.415 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.415 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.428 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:08.451 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:08.451 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:08.453 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:08.453 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 48 00 29 19 d1 02 9b 00 2b 39 d1 00 2e |
| 18:46:08.475 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.514 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.514 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.532 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:08.551 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:08.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:08.562 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:08.562 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 54 d5 d0 1d 4b 5a 6a 3a 42 02 d1 5a 69 |
| 18:46:08.573 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.573 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.614 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.614 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:08.650 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:08.650 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:08.656 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:08.656 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 60 3a 43 5a 61 04 98 03 23 c4 30 01 22 |
| 18:46:08.674 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.714 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.727 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:08.750 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:08.753 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:08.775 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.799 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:08.799 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 6c 21 00 00 68 fe f7 ec fa 00 99 1a 4b |
| 18:46:08.845 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.858 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:08.881 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:08.881 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:08.907 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.907 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.933 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:08.933 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 78 e0 00 69 43 c0 18 e0 e7 02 9b 00 2b |
| 18:46:08.982 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:08.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:08.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:09.015 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:09.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:09.049 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.049 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.053 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:09.053 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 84 19 d0 00 2e f4 d1 05 9b 1f 42 b8 d1 |
| 18:46:09.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:09.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:09.136 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:09.156 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:09.157 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 90 0e 4b 5a 6a 3a 42 02 d1 5a 69 ba 43 |
| 18:46:09.167 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.214 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.217 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:09.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:09.239 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:09.259 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:09.259 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 9c 5a 61 04 98 03 23 c4 30 00 22 21 00 |
| 18:46:09.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.318 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:09.344 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:09.344 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:09.362 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:09.362 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef a8 00 68 fe f7 cf fa 00 22 0a 4b e4 00 |
| 18:46:09.369 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.417 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.417 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.428 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:09.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:09.452 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:09.455 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:09.455 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef b4 1b 19 1a 65 a3 e7 00 2e a1 d0 69 43 |
| 18:46:09.476 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.518 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.519 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.531 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:09.554 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:09.554 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:09.558 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:09.559 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef c0 08 48 e4 00 b3 e7 00 2e 9b d1 de e7 |
| 18:46:09.579 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.621 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.622 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:09.657 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:09.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:09.658 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:09.658 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef cc 34 02 00 10 f4 01 00 10 34 01 00 10 |
| 18:46:09.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.718 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.732 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:09.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:09.756 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:09.761 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:09.761 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef d8 d4 6d 00 00 b4 01 00 10 04 02 00 10 |
| 18:46:09.781 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.822 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:09.858 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:09.858 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:09.860 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:09.860 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef e4 00 02 00 10 10 b5 04 00 78 21 01 f0 |
| 18:46:09.881 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.921 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.921 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:09.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:09.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:09.958 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:09.961 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:09.961 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef f0 cd f9 20 00 10 bd f0 b5 07 00 85 b0 |
| 18:46:09.982 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:09.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.024 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.037 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:10.060 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:10.060 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:10.065 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:10.065 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef fc fe f7 89 fc |
| 18:46:10.085 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.116 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.116 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.129 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:10.152 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:10.152 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:10.177 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.204 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:10.217 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5600 with 256 bytes and CRC32 0x3D420807 |
| 18:46:10.217 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ee 00 01 00 56 00 00 07 08 42 3d |
| 18:46:10.258 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.258 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.271 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:10.294 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:10.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:10.296 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 60,6% |
| 18:46:10.296 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 03 23 bc 6a 50 4e 22 00 63 63 e3 63 |
| 18:46:10.318 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.357 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.357 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:10.394 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:10.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:10.418 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.418 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.442 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:10.442 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c 00 23 68 32 21 00 a3 60 a3 62 13 80 |
| 18:46:10.487 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:10.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:10.524 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:10.526 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:10.526 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 18 01 22 6f 31 e3 60 05 39 22 75 4b 71 |
| 18:46:10.546 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.546 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.586 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.586 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.600 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:10.623 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:10.629 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:10.651 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.667 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:10.668 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 24 0b 80 23 61 e3 64 0b 80 62 75 22 00 |
| 18:46:10.714 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:10.749 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:10.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:10.768 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:10.768 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 30 2c 32 23 63 a3 64 a3 63 4b 80 0b 71 |
| 18:46:10.774 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.819 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.820 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:10.854 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:10.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:10.856 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:10.856 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 3c 13 70 a3 69 42 4a 93 42 63 d1 c4 21 |
| 18:46:10.879 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.917 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:10.954 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:10.954 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:10.976 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:10.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:10.987 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:10.987 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 48 ff 20 89 00 72 58 82 43 72 50 01 25 |
| 18:46:11.033 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:11.069 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:11.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:11.093 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.114 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:11.114 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 54 1a 79 3e 49 c8 6f 03 92 07 32 95 40 |
| 18:46:11.160 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:11.196 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:11.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:11.215 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:11.216 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 60 2a 00 1d 68 00 23 02 43 ca 67 01 22 |
| 18:46:11.221 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.266 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.281 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:11.304 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:11.304 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:11.323 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:11.323 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 6c eb 63 6b 61 ab 62 a3 1d db 7f 28 00 |
| 18:46:11.333 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.371 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.385 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:11.408 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:11.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:11.412 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:11.412 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 78 02 93 02 99 6b 6f 8a 40 13 43 01 92 |
| 18:46:11.435 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.435 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.476 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:11.511 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:11.511 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:11.513 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:11.513 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 84 6b 67 63 1d d9 7f 81 22 fe f7 dc fe |
| 18:46:11.536 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.578 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.590 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:11.614 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:11.614 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:11.618 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:11.618 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 90 01 22 6b 68 2f 49 13 43 6b 60 03 9b |
| 18:46:11.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/2/0 L_Data.ind, low priority hop count 6, tpdu 00 80 14 ce |
| 18:46:11.660 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.660 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.700 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.700 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:11.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:11.736 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:11.738 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:11.738 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 9c 1e 32 10 33 13 40 1e 3a 9a 40 2c 4b |
| 18:46:11.759 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.759 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.799 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:11.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:11.836 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:11.838 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:11.838 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef a8 32 60 18 68 00 f0 a4 ff 02 22 2e 00 |
| 18:46:11.859 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.899 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:11.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:11.936 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:11.936 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:11.949 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:11.959 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef b4 01 38 e8 60 6b 68 18 36 13 43 6b 60 |
| 18:46:11.961 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:11.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.007 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:12.042 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:12.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:12.046 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:12.047 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef c0 6b 68 28 00 93 43 6b 60 e3 1d d9 7f |
| 18:46:12.069 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.109 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.109 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:12.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:12.145 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:12.150 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:12.150 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef cc 23 4a 8b 00 f3 18 1a 60 03 22 fe f7 |
| 18:46:12.169 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.211 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.224 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:12.247 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:12.247 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:12.252 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:12.252 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef d8 c9 fe 02 9b 9b 00 f6 18 1f 4b 33 60 |
| 18:46:12.275 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.275 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.314 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.314 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.326 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:12.349 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:12.350 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:12.354 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:12.354 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef e4 ab 60 eb 6b 01 9e 01 9a 1e 40 13 42 |
| 18:46:12.377 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.378 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.417 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.417 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:12.452 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:12.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:12.476 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.478 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:12.478 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef f0 f9 d1 e0 21 20 6a c9 01 ff f7 30 fc |
| 18:46:12.525 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.525 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.539 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:12.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:12.562 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:12.580 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:12.581 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef fc 19 49 e0 69 |
| 18:46:12.587 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.618 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:12.656 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:12.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:12.680 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.681 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:12.704 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5700 with 256 bytes and CRC32 0xCC36FDE6 |
| 18:46:12.705 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ee 00 01 00 57 00 00 e6 fd 36 cc |
| 18:46:12.746 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.759 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:12.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:12.782 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:12.785 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 62,1% |
| 18:46:12.794 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 00 ff f7 2c fc 01 23 3e 64 7b 64 05 b0 |
| 18:46:12.806 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.848 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.848 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:12.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:12.883 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:12.899 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:12.899 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 0c f0 bd 16 49 16 4a 8b 42 05 d1 c4 21 |
| 18:46:12.911 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.948 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:12.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:12.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:12.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:12.985 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:12.999 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:12.999 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 18 89 00 72 58 14 48 02 40 96 e7 11 00 |
| 18:46:13.010 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.010 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.049 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.049 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:13.086 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:13.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:13.105 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:13.106 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 24 58 31 8b 42 04 d1 c4 21 89 00 72 58 |
| 18:46:13.114 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.114 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.153 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.153 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:13.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:13.190 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:13.214 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.236 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:13.236 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 30 10 48 f4 e7 60 32 93 42 00 d0 8a e7 |
| 18:46:13.282 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.282 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:13.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:13.319 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:13.346 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.348 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:13.348 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 3c c4 21 89 00 72 58 12 02 12 0a 83 e7 |
| 18:46:13.395 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.395 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:13.430 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:13.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:13.454 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.454 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.465 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:13.465 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 48 00 e1 00 e0 80 01 00 10 04 80 04 40 |
| 18:46:13.510 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:13.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:13.547 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:13.576 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.599 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:13.599 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 54 40 42 0f 00 dc 00 00 10 50 14 00 00 |
| 18:46:13.646 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.658 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:13.681 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:13.681 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:13.684 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:13.684 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 60 ff ff 00 00 20 20 00 00 84 02 00 10 |
| 18:46:13.725 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.725 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.764 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.778 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:13.802 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:13.802 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:13.805 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:13.805 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 6c 34 02 00 10 ff 00 ff ff ff ff 00 ff |
| 18:46:13.826 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.866 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:13.903 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:13.903 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:13.905 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:13.905 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 78 10 b5 83 8a 04 00 00 2b 03 d1 03 68 |
| 18:46:13.926 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.926 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.966 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:13.966 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:13.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:14.003 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:14.003 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:14.007 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:14.007 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 84 07 49 db 68 98 47 20 00 ff f7 33 ff |
| 18:46:14.027 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.027 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.067 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.081 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:14.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:14.104 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:14.108 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:14.108 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 90 23 00 01 22 5c 33 1a 70 03 4b 1b 68 |
| 18:46:14.130 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.170 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:14.208 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:14.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:14.212 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:14.212 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 9c 63 66 23 23 23 66 10 bd ff ff 00 00 |
| 18:46:14.235 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.235 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.274 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:14.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:14.310 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:14.314 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:14.314 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef a8 34 01 00 10 f7 b5 01 93 03 68 04 00 |
| 18:46:14.336 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.374 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:14.412 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:14.412 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:14.416 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:14.416 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef b4 db 68 00 6d 00 93 03 68 15 00 db 6e |
| 18:46:14.439 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.477 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.477 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.490 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:14.513 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:14.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:14.518 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:14.518 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef c0 0e 00 98 47 07 78 20 6d 3f 02 03 68 |
| 18:46:14.538 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.580 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.580 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:14.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:14.615 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:14.617 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:14.617 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef cc db 6e 98 47 41 78 00 9b 39 43 20 00 |
| 18:46:14.637 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.637 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.677 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:14.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:14.715 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:14.717 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:14.717 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef d8 98 47 2e 22 63 6b 00 27 1a 75 60 6b |
| 18:46:14.741 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.779 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.780 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:14.816 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:14.816 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:14.827 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:14.827 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef e4 03 68 5b 69 98 47 01 22 07 70 63 6b |
| 18:46:14.847 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.847 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.892 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:14.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:14.918 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:14.922 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:14.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->0/1/0 L_Data.ind, low priority hop count 6, tpdu 00 81 |
| 18:46:14.964 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:14.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:15.038 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:15.038 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef f0 5a 75 20 6d 03 68 9b 6c 98 47 ff 23 |
| 18:46:15.083 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:15.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:15.097 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:15.120 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:15.120 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:15.144 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:15.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:15.219 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:15.219 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef fc 03 70 20 6d |
| 18:46:15.258 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:15.258 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:15.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:15.290 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:15.290 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:15.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 0d a0 |
| 18:46:15.345 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:15.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:15.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 0f bc |
| 18:46:15.373 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:15.374 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5800 with 256 bytes and CRC32 0x7914E656 |
| 18:46:15.374 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ee 00 01 00 58 00 00 56 e6 14 79 |
| 18:46:15.415 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:15.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:15.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:15.451 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:15.451 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:15.475 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:15.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:15.455 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 63,6% |
| 18:46:15.506 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 00 03 68 5b 6c 98 47 07 70 20 6d 03 68 |
| 18:46:15.552 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:15.552 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:15.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:15.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:15.593 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:15.621 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:15.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:15.677 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:15.677 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 0c 1b 6a 98 47 33 12 03 70 20 6d 03 68 |
| 18:46:15.724 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:15.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:15.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:15.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:15.776 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:15.799 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:15.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:15.856 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:15.856 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 18 5b 6a 98 47 06 70 20 6d 03 68 9b 6a |
| 18:46:15.902 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:15.902 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:15.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:15.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:15.966 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:15.987 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:15.987 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 24 98 47 2b 12 03 70 20 6d 03 68 db 6a |
| 18:46:15.990 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:15.990 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.034 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:16.072 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:16.072 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:16.093 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:16.093 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 30 98 47 05 70 20 6d 03 68 1b 6b 98 47 |
| 18:46:16.097 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.097 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.141 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.141 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:16.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:16.177 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:16.207 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.214 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:16.214 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 3c 01 9b 03 70 23 6d 1f 75 9f 61 f7 bd |
| 18:46:16.260 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:16.297 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:16.298 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:16.323 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.391 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:16.391 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 48 10 b5 04 00 ff f7 ae ff 20 00 ff f7 |
| 18:46:16.436 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.436 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.450 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:16.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:16.473 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:16.497 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.497 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.586 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:16.586 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 54 91 ff 10 bd 10 b5 04 00 43 1d da 7f |
| 18:46:16.631 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.631 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:16.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:16.668 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:16.691 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.744 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.32->6/1/11 L_Data.ind, low priority hop count 6, tpdu 00 80 07 c2 |
| 18:46:16.790 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:16.791 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 60 00 2a fc d1 01 32 da 77 0f 23 e1 69 |
| 18:46:16.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/2/2 L_Data.ind, low priority hop count 6, tpdu 00 80 03 34 |
| 18:46:16.837 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.851 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:16.875 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:16.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:16.896 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:16.896 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 6c a0 69 4a 79 1a 40 07 32 01 f0 73 f8 |
| 18:46:16.899 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.899 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.942 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:16.942 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:16.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:16.978 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:16.978 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:17.005 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.005 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.008 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:17.008 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 78 20 00 fe f7 63 fb 10 bd 70 b5 03 79 |
| 18:46:17.054 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.055 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.067 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:17.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:17.091 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:17.094 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:17.095 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 84 04 00 00 2b 39 d0 43 79 00 2b 36 d0 |
| 18:46:17.128 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.129 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.156 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:17.192 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:17.192 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:17.194 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:17.194 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 90 1d 4d c2 68 2b 68 9b 1a 1c 4a 93 42 |
| 18:46:17.215 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.254 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.268 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:17.291 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:17.292 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:17.294 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:17.294 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 9c 01 d9 fe f7 6a fc 63 79 01 2b 13 d1 |
| 18:46:17.315 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.355 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.355 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.368 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:17.392 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:17.392 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:17.394 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:17.394 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef a8 a3 1d da 7f 02 2a 26 d1 da 7f d1 b2 |
| 18:46:17.416 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.462 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.462 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:17.494 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:17.494 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:17.498 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:17.498 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef b4 02 2a 22 d1 01 32 61 71 20 00 da 77 |
| 18:46:17.525 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.525 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.559 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:17.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:17.595 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:17.603 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:17.603 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef c0 ff f7 ca ff 00 23 a3 72 2b 68 23 61 |
| 18:46:17.619 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.661 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:17.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:17.697 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:17.703 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:17.703 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef cc 2b 68 e3 60 63 79 02 2b 13 d1 22 69 |
| 18:46:17.722 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.722 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.763 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.763 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:17.799 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:17.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:17.802 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:17.802 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef d8 2b 68 9b 1a 0c 4a 93 42 0d d9 0a 23 |
| 18:46:17.823 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.824 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.863 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.863 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:17.900 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:17.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:17.902 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:17.902 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef e4 e3 56 20 00 02 2b 09 dc ff f7 b4 ff |
| 18:46:17.923 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.964 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:17.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:17.976 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:18.000 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:18.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:18.002 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:18.002 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef f0 a3 7a 01 33 a3 72 2b 68 23 61 2b 68 |
| 18:46:18.023 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.062 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.076 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:18.100 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:18.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:18.123 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.191 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:18.192 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef fc e3 60 70 bd |
| 18:46:18.224 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.225 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:18.262 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:18.262 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:18.281 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:18.288 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.320 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5900 with 256 bytes and CRC32 0x0EF8294A |
| 18:46:18.321 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ee 00 01 00 59 00 00 4a 29 f8 0e |
| 18:46:18.361 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.362 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:18.400 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:18.400 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:18.402 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 65,1% |
| 18:46:18.403 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 00 fe f7 39 fc fb e7 c0 46 34 01 00 10 |
| 18:46:18.424 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.424 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.463 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:18.500 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:18.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:18.524 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.528 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:18.528 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 0c 6f 17 00 00 b7 0b 00 00 f0 b5 04 00 |
| 18:46:18.575 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.588 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:18.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:18.611 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:18.614 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:18.614 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 18 85 b0 ff f7 b1 ff a3 6a 1a 00 2c 32 |
| 18:46:18.637 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.637 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.690 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:18.713 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:18.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:18.726 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:18.726 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 24 99 68 10 78 01 28 02 d0 12 78 06 2a |
| 18:46:18.740 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.781 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.781 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:18.816 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:18.816 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:18.831 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:18.831 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 30 36 d1 da 6c 00 2a 33 d1 00 29 31 d0 |
| 18:46:18.841 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.880 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.880 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.893 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:18.917 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:18.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:18.927 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:18.927 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 3c 62 6b 12 7d 52 07 2d d5 c0 20 5d 68 |
| 18:46:18.941 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.980 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:18.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:18.995 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:19.018 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:19.018 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:19.025 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:19.025 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 48 9b 68 2a 79 db b2 02 93 eb 78 12 02 |
| 18:46:19.042 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.084 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:19.120 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:19.120 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:19.132 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:19.133 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 54 1a 43 ab 79 ee 79 19 02 80 00 01 40 |
| 18:46:19.143 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.183 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:19.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:19.221 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:19.247 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.247 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.272 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:19.272 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 60 0e 43 f0 21 a0 27 89 00 31 40 bf 00 |
| 18:46:19.318 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.331 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:19.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:19.354 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:19.379 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.402 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:19.402 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 6c b9 42 09 d0 00 dd 6e e0 08 00 80 27 |
| 18:46:19.449 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:19.484 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:19.484 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:19.496 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:19.496 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 78 81 38 ff 38 b8 43 80 b2 00 28 68 d1 |
| 18:46:19.510 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.550 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.550 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.563 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:19.586 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:19.587 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:19.592 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:19.593 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 84 8e b2 00 2a 67 d1 23 68 2a 00 9f 69 |
| 18:46:19.610 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.610 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.651 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.664 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:19.687 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:19.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:19.692 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:19.692 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 90 31 00 20 00 02 9b b8 47 23 68 20 00 |
| 18:46:19.713 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.751 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.766 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:19.789 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:19.789 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:19.791 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:19.791 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 9c 5b 6a 98 47 e0 6a 00 28 3c d0 c1 49 |
| 18:46:19.814 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.857 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.857 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:19.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:19.892 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:19.896 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:19.896 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef a8 ff f7 d8 fa e2 6a c0 4d 53 06 9b 0f |
| 18:46:19.921 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.921 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.958 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:19.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:19.971 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:19.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:19.994 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:20.005 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:20.005 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef b4 9b 00 58 59 1f 23 1a 40 1b 3b 93 40 |
| 18:46:20.018 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.018 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.059 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.073 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:20.096 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:20.100 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:20.102 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:20.103 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef c0 1a 58 a0 6c 53 1e 9a 41 ba 4b 61 6c |
| 18:46:20.123 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.165 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:20.200 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:20.200 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:20.204 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:20.205 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef cc 1b 68 82 42 00 d1 87 e1 23 64 a2 64 |
| 18:46:20.227 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.265 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:20.303 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:20.303 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:20.317 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:20.317 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef d8 63 6c 00 2b 06 d1 00 29 04 d0 62 6b |
| 18:46:20.326 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.326 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.367 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.367 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.380 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:20.403 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:20.403 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:20.405 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:20.405 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef e4 7f 3b 11 7d 4b 40 13 75 c0 21 e0 6a |
| 18:46:20.427 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.427 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.466 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.467 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.480 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:20.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:20.503 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:20.507 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:20.507 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef f0 c9 01 ff f7 b3 fa 01 20 1f 23 01 00 |
| 18:46:20.529 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.570 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.581 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:20.605 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:20.605 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:20.607 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:20.607 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef fc e2 6a 13 40 |
| 18:46:20.628 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.628 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.657 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:20.694 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:20.694 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:20.697 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:20.698 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5A00 with 256 bytes and CRC32 0x72993024 |
| 18:46:20.698 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ee 00 01 00 5a 00 00 24 30 99 72 |
| 18:46:20.718 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.754 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:20.791 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:20.791 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:20.792 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 66,7% |
| 18:46:20.792 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 00 99 40 63 6b 52 06 1b 7d 92 0f 03 40 |
| 18:46:20.813 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 168 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.852 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.866 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:20.890 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:20.890 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:20.892 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:20.892 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 0c 20 6b 92 00 1b 1a 58 1e 83 41 aa 58 |
| 18:46:20.914 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.954 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:20.954 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:20.966 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:20.990 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:20.990 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:20.994 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:20.995 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 18 5b 42 0b 40 89 00 8b 50 a3 6a db 6c |
| 18:46:21.014 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.057 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.057 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:21.092 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:21.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:21.114 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:21.114 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 24 00 2b 12 d1 22 00 4c 32 12 78 00 2a |
| 18:46:21.115 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.159 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.159 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:21.196 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:21.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:21.205 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:21.205 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 30 0d d0 62 79 00 2a 06 d0 e2 88 00 2a |
| 18:46:21.223 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.261 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.275 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:21.298 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:21.298 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:21.321 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:21.321 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 3c 03 d0 81 21 20 00 fe f7 7c fb 23 68 |
| 18:46:21.321 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.368 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.368 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:21.405 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:21.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:21.425 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:21.426 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 48 20 00 1b 6b 98 47 05 b0 f0 bd 81 42 |
| 18:46:21.429 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.472 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.472 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:21.509 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:21.509 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:21.532 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.532 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.569 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:21.569 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 54 96 d0 b6 b2 95 e7 69 79 52 ba 92 b2 |
| 18:46:21.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:21.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:21.653 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:21.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.694 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:21.694 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 60 7f 29 08 d9 02 99 23 68 00 91 5f 69 |
| 18:46:21.739 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.753 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:21.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:21.776 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:21.800 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.845 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:21.846 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 6c 31 00 2b 00 20 00 b8 47 90 e7 a1 8a |
| 18:46:21.892 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:21.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:21.927 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:21.933 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:21.955 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:21.955 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 78 91 42 00 d0 8c e7 3c 22 18 00 90 43 |
| 18:46:21.955 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:21.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.004 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.016 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:22.039 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:22.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:22.061 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:22.062 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 84 aa 78 69 78 12 02 0a 43 57 ba 42 b2 |
| 18:46:22.064 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.112 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.112 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:22.148 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:22.148 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:22.159 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:22.159 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 90 b9 b2 00 2a 00 db 8f e0 80 28 16 d0 |
| 18:46:22.175 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.175 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.214 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:22.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:22.250 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:22.254 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:22.254 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 9c 81 28 3a d0 da 07 65 d4 62 79 01 2a |
| 18:46:22.274 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.315 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:22.352 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:22.352 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:22.374 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:22.374 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef a8 00 d8 75 e7 e2 88 8a 42 00 d0 71 e7 |
| 18:46:22.377 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.378 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.419 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.419 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.432 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:22.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:22.459 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:22.482 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.482 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.484 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:22.486 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef b4 08 21 0f 20 61 56 9b 08 03 40 8b 42 |
| 18:46:22.533 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.533 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:22.568 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:22.568 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:22.572 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:22.572 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef c0 3d d0 20 00 fe f7 57 fb 66 e7 65 79 |
| 18:46:22.592 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.632 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:22.670 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:22.671 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:22.681 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:22.681 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef cc 00 2d 12 d0 01 3d 01 2d 00 d9 5f e7 |
| 18:46:22.695 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.695 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.735 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.749 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:22.773 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:22.773 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:22.777 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:22.777 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef d8 e3 88 8b 42 00 d1 5b e7 75 4a 20 00 |
| 18:46:22.798 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.798 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.838 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.851 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:22.875 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:22.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:22.877 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:22.877 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef e4 d3 8f 01 33 d3 87 0a 00 00 23 81 21 |
| 18:46:22.897 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.938 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:22.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:22.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:22.975 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:22.975 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:22.987 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:22.987 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef f0 fe f7 25 fb 50 e7 23 68 20 00 db 69 |
| 18:46:23.001 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.002 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.040 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:23.077 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:23.078 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:23.081 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:23.081 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef fc 98 47 6d 4b |
| 18:46:23.103 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.131 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:23.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:23.169 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:23.173 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:23.174 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5B00 with 256 bytes and CRC32 0x4FF0F920 |
| 18:46:23.174 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ee 00 01 00 5b 00 00 20 f9 f0 4f |
| 18:46:23.194 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.230 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.243 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:23.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:23.267 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:23.271 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 68,2% |
| 18:46:23.272 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 00 e7 80 1b 68 25 81 e3 60 63 79 01 2b |
| 18:46:23.293 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.293 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.334 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.334 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:23.370 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:23.370 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:23.374 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:23.374 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 0c 00 d1 43 e7 01 23 63 71 40 e7 63 79 |
| 18:46:23.400 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.400 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.435 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.435 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:23.472 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:23.472 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:23.483 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:23.483 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 18 20 68 01 3b 01 2b 00 d9 3a e7 e3 88 |
| 18:46:23.496 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.496 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.535 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.535 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:23.572 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:23.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:23.594 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 16 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.610 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:23.610 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 24 8b 42 00 d0 36 e7 00 23 62 4a 63 71 |
| 18:46:23.679 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:23.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:23.715 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:23.740 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 20 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.748 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:23.748 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 30 d3 8f 01 33 d3 87 c3 69 20 00 98 47 |
| 18:46:23.793 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.807 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:23.830 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:23.830 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:23.833 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:23.833 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 3c 2c e7 00 26 5c 4b 01 31 1b 68 01 40 |
| 18:46:23.853 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 24 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.895 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.895 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.907 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:23.930 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:23.931 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:23.934 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:23.934 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 48 a7 1d 21 72 e3 60 e5 1d fe 77 eb 7f |
| 18:46:23.955 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:23.997 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:23.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:24.033 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:24.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:24.042 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:24.042 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 54 b3 42 db d0 21 6a 4a 79 02 40 07 32 |
| 18:46:24.059 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.099 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:24.134 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:24.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:24.158 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.158 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.161 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:24.161 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 60 e0 69 00 f0 fc fe eb 7f db b2 fb 77 |
| 18:46:24.209 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.209 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:24.244 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:24.244 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:24.251 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:24.251 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 6c ee 77 cb e7 ff 2b 00 d1 10 e7 62 79 |
| 18:46:24.269 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 40 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.311 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.311 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:24.346 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:24.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:24.349 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:24.349 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 78 00 2a 00 d1 0c e7 08 20 20 56 9b 06 |
| 18:46:24.369 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 44 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.369 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.409 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.422 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:24.446 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:24.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:24.469 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 48 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.469 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.478 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:24.478 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 84 1b 0f 83 42 00 d0 05 e7 e3 88 8b 42 |
| 18:46:24.523 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:24.560 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:24.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:24.564 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:24.564 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 90 00 d0 01 e7 0a 23 e3 56 20 00 02 2b |
| 18:46:24.584 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 52 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.584 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.624 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.624 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:24.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:24.663 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:24.666 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:24.666 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 9c 92 dc 02 2a 90 d1 ff f7 59 fe a3 7a |
| 18:46:24.686 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 56 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.686 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.729 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:24.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:24.764 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:24.780 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:24.787 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef a8 01 33 a3 72 41 4b 1a 68 1b 68 22 61 |
| 18:46:24.788 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 60 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.788 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.834 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:24.872 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:24.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:24.879 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:24.879 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef b4 e3 60 ef e6 03 2b 21 d8 67 1d fb 7f |
| 18:46:24.894 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 64 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.894 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.934 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:24.948 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:24.971 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:24.971 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:24.995 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 68 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:24.995 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.012 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:25.012 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef c0 00 2b fc d1 0c 22 01 33 fb 77 28 78 |
| 18:46:25.057 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.057 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:25.093 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:25.093 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:25.099 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:25.099 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef cc a3 69 10 40 5c 3a 02 43 1a 70 0a 0a |
| 18:46:25.120 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.120 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.160 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.172 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:25.196 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:25.198 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:25.204 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:25.204 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef d8 19 71 da 70 22 68 00 93 13 6a 31 00 |
| 18:46:25.223 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 76 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.263 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.275 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:25.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:25.299 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:25.313 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:25.313 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef e4 9c 46 2a 00 20 00 65 46 02 9b a8 47 |
| 18:46:25.324 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.324 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.365 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.377 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:25.400 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:25.400 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:25.405 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:25.405 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef f0 00 28 03 d0 20 00 fe f7 a5 f9 cd e6 |
| 18:46:25.426 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 84 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.426 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.466 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:25.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:25.503 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:25.508 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:25.508 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef fc f8 77 cb e6 |
| 18:46:25.527 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 88 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.528 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.558 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.558 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:25.593 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:25.593 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:25.596 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:25.596 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5C00 with 256 bytes and CRC32 0xF98776E5 |
| 18:46:25.598 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ee 00 01 00 5c 00 00 e5 76 87 f9 |
| 18:46:25.619 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 92 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.619 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.652 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.652 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.667 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:25.690 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:25.690 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:25.692 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 69,7% |
| 18:46:25.692 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 00 e2 88 8a 42 00 d0 c7 e6 61 79 00 29 |
| 18:46:25.713 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 96 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.755 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.755 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:25.790 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:25.790 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:25.792 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:25.792 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 0c 00 d1 c3 e6 9b 08 09 21 18 00 0f 27 |
| 18:46:25.813 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 100 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.853 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.867 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:25.890 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:25.890 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:25.892 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:25.892 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 18 61 56 38 40 03 00 88 42 4c d1 c2 21 |
| 18:46:25.913 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 104 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.913 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.952 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:25.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:25.966 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:25.990 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:25.990 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:25.992 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:25.992 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 24 20 00 fe f7 8a fa 63 7a 01 33 3b 40 |
| 18:46:26.013 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 108 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.013 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.056 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.057 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.066 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:26.090 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:26.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:26.092 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:26.092 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 63 72 20 4b 1b 68 e3 60 a3 1d db 7f |
| 18:46:26.114 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 112 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.114 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.154 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:26.189 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:26.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:26.208 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:26.209 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 3c 00 2b 2d d1 23 00 e7 69 25 33 03 93 |
| 18:46:26.214 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 116 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.259 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:26.296 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:26.296 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:26.305 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:26.311 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 48 01 23 03 9a 31 00 13 70 23 68 00 97 |
| 18:46:26.323 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 120 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.361 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.361 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:26.401 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:26.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:26.425 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 124 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.465 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:26.465 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 54 1b 6a 2a 00 9c 46 20 00 66 46 02 9b |
| 18:46:26.511 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.511 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:26.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:26.547 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:26.558 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:26.558 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 60 b0 47 00 28 1e d0 0c 23 2a 78 1a 40 |
| 18:46:26.573 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 128 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.573 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.613 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:26.648 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:26.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:26.664 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:26.664 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 6c 5c 3b 13 43 3b 70 e3 88 1a 0a 3b 71 |
| 18:46:26.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 132 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.713 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.737 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:26.751 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:26.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:26.773 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:26.773 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 78 08 23 fa 70 e2 69 e3 56 97 42 02 d0 |
| 18:46:26.774 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 136 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.823 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.824 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.835 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:26.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:26.859 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:26.872 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:26.872 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 84 0f 22 01 33 13 40 3c 21 ba 79 9b 00 |
| 18:46:26.883 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.924 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.924 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:26.938 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:26.961 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:26.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:26.965 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:26.965 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 90 8a 43 13 43 40 22 13 43 bb 71 7d e6 |
| 18:46:26.984 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:26.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.024 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.024 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.037 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:27.060 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:27.061 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:27.083 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.147 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:27.152 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 9c 23 00 27 6a 26 33 d0 e7 03 9b 18 70 |
| 18:46:27.198 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:27.235 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:27.235 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:27.252 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:27.252 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef a8 76 e6 c0 46 10 10 00 00 d4 6d 00 00 |
| 18:46:27.263 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.300 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:27.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:27.337 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:27.361 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.361 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.390 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:27.391 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef b4 34 01 00 10 3a 02 00 10 01 39 0f 4d |
| 18:46:27.437 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.437 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:27.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:27.473 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:27.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.34->6/1/12 L_Data.ind, low priority hop count 6, tpdu 00 80 07 bd |
| 18:46:27.506 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:27.506 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef c0 39 40 88 42 09 d1 c2 21 20 00 fe f7 |
| 18:46:27.519 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.519 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.558 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:27.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:27.595 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:27.608 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:27.608 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef cc 38 fa 0c 4a d3 8f 01 33 d3 87 2b 68 |
| 18:46:27.620 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.657 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.658 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:27.696 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:27.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:27.721 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.759 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:27.760 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef d8 6c e7 c3 21 20 00 fe f7 2e fa f8 e7 |
| 18:46:27.806 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:27.841 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:27.853 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:27.875 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.884 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:27.884 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef e4 20 6c 00 28 00 d1 75 e6 1b 1a 32 2b |
| 18:46:27.931 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:27.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:27.967 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:27.967 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:27.972 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:27.972 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef f0 00 d5 71 e6 00 23 62 64 23 64 6d e6 |
| 18:46:27.991 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:27.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.033 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:28.069 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:28.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:28.072 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:28.073 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef fc 34 01 00 10 |
| 18:46:28.092 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.092 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.121 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.121 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.135 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:28.158 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:28.158 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:28.160 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:28.161 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5D00 with 256 bytes and CRC32 0xB93F7C43 |
| 18:46:28.161 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ee 00 01 00 5d 00 00 43 7c 3f b9 |
| 18:46:28.181 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.181 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.218 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:28.253 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:28.254 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:28.261 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 71,2% |
| 18:46:28.261 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 00 3c 02 00 10 f0 b5 03 79 05 00 87 b0 |
| 18:46:28.279 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.279 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.319 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:28.356 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:28.356 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:28.358 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:28.358 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 0c 00 2b 00 d1 da e0 ff f7 ff fd ab 6a |
| 18:46:28.379 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.419 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.419 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.432 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:28.456 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:28.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:28.458 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:28.458 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 18 db 6c 00 2b 00 d0 d3 e0 2b 00 5c 33 |
| 18:46:28.478 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.478 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.520 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.520 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.532 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:28.555 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:28.555 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:28.557 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:28.558 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 24 1b 78 00 2b 00 d1 b7 e0 2b 68 28 00 |
| 18:46:28.579 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.618 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:28.655 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:28.655 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:28.664 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:28.665 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 30 db 6a 98 47 00 28 00 d1 b0 e0 67 4b |
| 18:46:28.677 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.718 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.731 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:28.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:28.754 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:28.759 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:28.759 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 3c 6a 6e 1b 68 9b 1a 2a 6e 93 42 00 d2 |
| 18:46:28.780 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.780 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.819 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:28.857 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:28.857 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:28.874 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:28.874 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 48 9c e0 ec 6b 23 68 20 00 5b 69 98 47 |
| 18:46:28.885 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.921 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.921 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:28.936 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:28.961 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:28.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:28.977 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:28.977 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 54 00 90 00 28 00 d1 93 e0 23 68 20 00 |
| 18:46:28.987 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:28.987 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.028 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.028 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:29.063 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:29.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:29.072 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:29.072 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 60 1b 69 98 47 03 78 01 93 00 2b 00 d1 |
| 18:46:29.087 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.130 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.130 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:29.165 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:29.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:29.174 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:29.174 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 6c 8a e0 20 69 19 00 00 f0 b1 fd 21 61 |
| 18:46:29.189 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.189 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.232 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.232 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.244 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:29.268 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:29.268 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:29.270 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:29.271 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 78 8f b2 bb b2 03 93 01 9b ba b2 93 42 |
| 18:46:29.293 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.293 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.333 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:29.370 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:29.370 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:29.388 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:29.388 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 84 03 d8 23 69 01 33 23 61 7a e0 23 68 |
| 18:46:29.396 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.396 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.438 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.438 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:29.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:29.476 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:29.498 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:29.498 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 90 39 00 9b 68 20 00 98 47 03 78 02 93 |
| 18:46:29.499 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.547 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:29.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:29.585 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:29.609 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:29.609 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 9c 63 68 98 6b 03 68 9b 68 98 47 06 00 |
| 18:46:29.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.657 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:29.694 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:29.694 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:29.710 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:29.710 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef a8 03 78 01 36 5b 00 c3 18 04 93 04 9b |
| 18:46:29.721 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.721 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.757 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.757 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:29.794 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:29.794 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:29.799 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:29.799 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef b4 b3 42 1d d9 73 78 9f 42 1c d1 33 78 |
| 18:46:29.818 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.859 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:29.895 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:29.895 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:29.897 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:29.897 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef c0 01 33 05 93 63 68 98 6b 03 68 db 68 |
| 18:46:29.917 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.958 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:29.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:29.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:29.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:29.994 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:29.997 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:29.997 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef cc 98 47 05 9b 83 42 11 d8 63 68 98 6b |
| 18:46:30.016 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.016 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.057 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.057 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.070 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:30.094 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:30.096 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:30.102 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:30.103 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef d8 03 68 5b 68 98 47 33 78 5b 00 c0 18 |
| 18:46:30.120 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.120 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.159 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.173 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:30.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:30.197 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:30.223 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:30.223 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef e4 82 78 43 78 12 02 1a 43 52 ba 92 b2 |
| 18:46:30.224 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.224 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.270 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.285 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:30.307 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:30.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:30.328 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.351 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:30.351 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef f0 00 2a 03 d1 01 37 c0 e7 02 36 da e7 |
| 18:46:30.396 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.396 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:30.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:30.434 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:30.437 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:30.437 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef fc 44 21 02 9b |
| 18:46:30.457 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.464 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.485 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:30.523 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:30.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:30.527 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:30.528 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5E00 with 256 bytes and CRC32 0xFBA57E1D |
| 18:46:30.528 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ee 00 01 00 5e 00 00 1d 7e a5 fb |
| 18:46:30.549 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.550 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.585 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.598 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:30.621 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:30.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:30.623 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 72,7% |
| 18:46:30.623 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 00 0b 40 8b 42 f6 d1 01 20 03 9b 00 99 |
| 18:46:30.644 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.644 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.690 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.690 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:30.722 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:30.722 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:30.726 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:30.726 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 0c 5b 08 c9 18 02 91 00 99 c9 5c 03 9b |
| 18:46:30.745 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.745 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.786 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:30.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:30.829 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:30.852 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.855 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:30.855 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 18 03 42 00 d0 09 09 cb 43 9b 07 e7 d1 |
| 18:46:30.901 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.901 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:30.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:30.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:30.937 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:30.942 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:30.942 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 24 04 20 0b 00 03 40 01 42 4e d0 63 68 |
| 18:46:30.962 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:30.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.004 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:31.040 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:31.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:31.042 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:31.042 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 30 59 1d c8 7f c6 b2 00 28 fb d1 01 30 |
| 18:46:31.063 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.104 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.116 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:31.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:31.140 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:31.149 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:31.149 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 3c c8 77 bc 21 9b 69 19 70 1a 71 11 0a |
| 18:46:31.165 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.204 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.204 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.217 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:31.241 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:31.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:31.243 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:31.243 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 48 e1 22 d9 70 5a 71 9e 71 de 71 60 68 |
| 18:46:31.265 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.305 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.317 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:31.341 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:31.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:31.344 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:31.345 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 54 fe f7 76 f8 63 68 e7 60 9b 6a 1e 75 |
| 18:46:31.364 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.407 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.419 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:31.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:31.443 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:31.447 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:31.447 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 60 04 23 07 21 ba 00 1a 40 91 40 02 9b |
| 18:46:31.470 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.508 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.521 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:31.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:31.545 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:31.570 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.583 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:31.584 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 6c 01 37 1b 78 8b 43 01 21 91 40 02 9a |
| 18:46:31.628 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.642 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:31.666 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:31.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:31.675 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:31.676 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 78 0b 43 13 70 16 4b 27 61 1b 68 6b 66 |
| 18:46:31.689 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.730 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.730 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.743 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:31.766 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:31.766 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:31.788 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.788 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.799 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:31.800 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 84 fa 21 14 4a 6b 6e 12 68 c9 00 d2 1a |
| 18:46:31.846 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:31.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:31.882 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:31.887 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:31.887 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 90 8a 42 03 d3 fa 22 92 00 9b 18 6b 66 |
| 18:46:31.904 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.904 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.945 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:31.945 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:31.958 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:31.982 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:31.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:31.987 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:31.987 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 9c 2b 6d 1b 7d 00 2b 11 d0 ac 6a 20 00 |
| 18:46:32.006 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.007 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.050 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.050 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.061 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:32.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:32.084 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:32.096 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:32.098 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef a8 fd f7 4c fb 00 28 0b d0 a3 68 00 2b |
| 18:46:32.109 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.110 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.156 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.156 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.164 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:32.187 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:32.187 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:32.202 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:32.202 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef b4 08 d1 6b 79 00 2b 05 d1 06 4b 02 21 |
| 18:46:32.215 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.253 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.253 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:32.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:32.293 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:32.299 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:32.299 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef c0 28 00 1b 68 ff f7 cc f9 07 b0 f0 bd |
| 18:46:32.318 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.358 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.370 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:32.393 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:32.393 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:32.413 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:32.413 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef cc 39 00 20 00 fe f7 71 f8 c4 e7 c0 46 |
| 18:46:32.419 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.419 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.458 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.472 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:32.495 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:32.495 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:32.502 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:32.502 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef d8 34 01 00 10 f7 b5 1f 00 03 68 0d 00 |
| 18:46:32.520 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.520 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.559 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.559 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.573 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:32.596 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:32.596 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:32.601 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:32.601 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef e4 db 69 04 00 16 00 98 47 a8 42 04 d1 |
| 18:46:32.622 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.622 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.660 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.660 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.673 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:32.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:32.697 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:32.705 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:32.705 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef f0 01 2f 02 d1 33 78 23 75 f7 bd 63 68 |
| 18:46:32.724 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.762 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.762 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:32.799 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:32.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:32.825 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.825 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.827 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:32.827 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef fc 20 00 ed 1a |
| 18:46:32.860 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.875 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:32.898 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:32.899 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:32.923 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:32.926 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:32.944 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x5F00 with 256 bytes and CRC32 0x60C417CC |
| 18:46:32.945 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ee 00 01 00 5f 00 00 cc 17 c4 60 |
| 18:46:32.988 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:32.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:33.023 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:33.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:33.025 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 74,2% |
| 18:46:33.025 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 00 23 68 db 69 98 47 a8 42 08 d3 7b 19 |
| 18:46:33.045 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.085 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:33.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:33.123 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:33.130 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:33.130 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 0c 01 93 23 68 20 00 db 69 98 47 7b 19 |
| 18:46:33.146 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.186 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.187 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:33.222 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:33.222 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:33.248 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.260 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:33.260 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 18 83 42 10 d2 20 69 3a 00 31 00 40 19 |
| 18:46:33.305 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:33.341 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:33.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:33.346 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:33.346 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 24 00 f0 1b fd e6 e7 23 68 20 00 db 69 |
| 18:46:33.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.408 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:33.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:33.444 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:33.447 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:33.448 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 30 98 47 33 78 a8 42 06 d1 23 75 01 36 |
| 18:46:33.467 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.467 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.510 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:33.545 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:33.545 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:33.550 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:33.550 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 3c 01 35 01 9b ab 42 f2 d1 d8 e7 22 69 |
| 18:46:33.571 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.610 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.624 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:33.647 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:33.647 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:33.651 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:33.652 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 48 53 55 f6 e7 f0 b5 85 b0 01 93 03 68 |
| 18:46:33.674 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.713 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:33.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:33.751 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:33.754 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:33.755 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 54 0e 00 db 69 04 00 17 00 98 47 b0 42 |
| 18:46:33.778 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.778 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.818 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.830 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:33.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:33.853 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:33.855 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:33.855 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 60 06 d1 01 9b 01 2b 03 d1 23 7d 3b 70 |
| 18:46:33.879 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.918 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.918 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:33.930 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:33.953 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:33.953 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:33.957 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:33.957 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 6c 05 b0 f0 bd 63 68 20 00 f5 1a 03 93 |
| 18:46:33.980 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:33.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.017 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:34.055 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:34.055 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:34.059 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:34.059 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 78 23 68 db 69 98 47 a8 42 09 d3 01 9b |
| 18:46:34.079 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.121 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.121 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:34.157 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:34.157 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:34.180 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.181 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.188 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:34.189 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 84 20 00 5b 19 02 93 23 68 db 69 98 47 |
| 18:46:34.233 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.247 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:34.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:34.270 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:34.295 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.326 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:34.326 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 90 02 9b 83 42 12 d2 21 69 38 00 01 9a |
| 18:46:34.371 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.385 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:34.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:34.408 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:34.417 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:34.417 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 9c 49 19 00 f0 de fc e3 e7 23 68 20 00 |
| 18:46:34.430 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.431 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.473 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:34.509 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:34.509 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:34.513 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:34.513 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef a8 db 69 98 47 a8 42 09 d1 22 7d 03 9b |
| 18:46:34.532 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.532 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.575 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.588 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:34.610 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:34.610 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:34.634 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.635 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.643 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:34.643 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef b4 9b 1b fb 18 5a 55 01 35 02 9b ab 42 |
| 18:46:34.690 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.690 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.702 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:34.725 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:34.725 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:34.750 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.750 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.751 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:34.751 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef c0 f0 d1 d3 e7 23 69 5a 5d f3 e7 f0 b5 |
| 18:46:34.799 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:34.834 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:34.835 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:34.849 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:34.849 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef cc 89 b0 06 00 0c 00 1d 00 18 1e 06 92 |
| 18:46:34.860 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.901 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.901 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:34.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:34.937 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:34.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:34.944 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:34.944 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef d8 51 d0 4b 1e 5b 19 00 20 04 93 99 42 |
| 18:46:34.961 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:34.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.003 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.003 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:35.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:35.039 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:35.041 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:35.042 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef e4 4b d8 70 6d 00 28 0c d0 03 68 21 00 |
| 18:46:35.062 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.062 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.103 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.117 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:35.140 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:35.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:35.162 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:35.162 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef f0 9b 68 98 47 05 90 70 6d 04 99 03 68 |
| 18:46:35.166 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.166 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.211 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.211 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.225 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:35.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:35.248 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:35.250 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:35.250 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef fc 9b 68 98 47 |
| 18:46:35.271 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.271 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.300 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.314 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:35.337 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:35.337 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:35.342 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:35.345 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6000 with 256 bytes and CRC32 0x510D05EC |
| 18:46:35.346 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ee 00 01 00 60 00 00 ec 05 0d 51 |
| 18:46:35.359 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.359 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.395 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.395 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.409 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:35.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:35.437 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:35.439 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 75,7% |
| 18:46:35.460 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 00 05 9b 00 2b 1d d1 06 9b 03 93 01 23 |
| 18:46:35.460 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.460 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.505 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.526 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:35.542 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:35.542 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:35.547 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:35.547 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 0c 05 93 30 6d 21 00 03 68 04 9a 1b 69 |
| 18:46:35.568 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.569 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.607 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:35.644 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:35.644 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:35.649 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:35.649 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 18 98 47 00 28 64 d0 21 00 30 00 04 9d |
| 18:46:35.670 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.671 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.723 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:35.746 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:35.746 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:35.765 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:35.765 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 24 fd f7 62 fc 0e 9b 01 35 1b 78 2d 1b |
| 18:46:35.772 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.772 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.817 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.817 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.829 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:35.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:35.853 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:35.854 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:35.854 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 30 2a 00 00 2b 4d d0 01 00 03 98 00 f0 |
| 18:46:35.877 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.877 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.917 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:35.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:35.952 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:35.952 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:35.959 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:35.959 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 3c 90 fc 01 20 1d e0 00 28 0b d1 27 00 |
| 18:46:35.981 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:35.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.019 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.020 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:36.055 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:36.055 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:36.059 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:36.059 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 48 2b 19 07 93 06 9b 1b 1b db 19 03 93 |
| 18:46:36.082 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.122 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.122 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:36.157 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:36.157 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:36.172 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:36.172 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 54 07 9b bb 42 19 d1 1c 00 d7 e7 0e 9a |
| 18:46:36.183 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.225 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.225 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:36.260 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:36.260 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:36.264 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:36.264 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 60 70 6d 12 78 03 68 00 2a 0b d0 00 22 |
| 18:46:36.284 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.323 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.338 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:36.361 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:36.361 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:36.374 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:36.374 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 6c 00 92 5e 68 21 00 2b 00 06 9a b0 47 |
| 18:46:36.385 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.385 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.423 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.423 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.437 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:36.461 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:36.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:36.463 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:36.463 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 78 43 42 58 41 c0 b2 09 b0 f0 bd 1e 68 |
| 18:46:36.484 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.484 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.526 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.526 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:36.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:36.561 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:36.565 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:36.565 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 84 21 00 2b 00 06 9a b0 47 f4 e7 70 6d |
| 18:46:36.586 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.586 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.625 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:36.662 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:36.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:36.676 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:36.676 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 90 39 00 03 68 9b 68 98 47 00 28 0e d0 |
| 18:46:36.687 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.725 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.725 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:36.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:36.761 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:36.763 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:36.763 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 9c 0e 9a 70 6d 12 78 03 68 00 2a 0e d0 |
| 18:46:36.784 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.784 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.823 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:36.861 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:36.861 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:36.884 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.884 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.902 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:36.902 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef a8 00 22 00 92 5d 68 39 00 01 23 03 9a |
| 18:46:36.949 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:36.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:36.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:36.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:36.984 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:37.002 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:37.002 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef b4 a8 47 00 28 01 d0 3c 00 a7 e7 00 23 |
| 18:46:37.011 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.012 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.049 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.049 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:37.086 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:37.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:37.093 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:37.093 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef c0 01 37 05 93 c2 e7 1d 68 39 00 01 23 |
| 18:46:37.111 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.149 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.149 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.163 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:37.186 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:37.186 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:37.203 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:37.204 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef cc 03 9a a8 47 f1 e7 03 99 00 f0 43 fc |
| 18:46:37.211 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.250 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.250 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.263 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:37.287 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:37.287 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:37.295 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:37.295 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef d8 01 23 32 6d 13 75 43 4b 1b 68 32 33 |
| 18:46:37.313 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.354 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:37.389 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:37.389 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:37.403 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:37.403 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef e4 93 61 aa e7 30 6d 21 00 03 68 db 68 |
| 18:46:37.416 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.454 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.454 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:37.492 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:37.491 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:37.509 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:37.509 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef f0 98 47 00 28 16 d0 33 6d 21 00 30 00 |
| 18:46:37.515 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.516 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.562 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.574 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:37.598 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:37.598 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:37.622 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.622 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.626 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:37.626 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef fc 9d 68 fd f7 |
| 18:46:37.658 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.658 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.673 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:37.704 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:37.704 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:37.728 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.728 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.739 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:37.740 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6100 with 256 bytes and CRC32 0x225EF6F2 |
| 18:46:37.742 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ee 00 01 00 61 00 00 f2 f6 5e 22 |
| 18:46:37.782 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.796 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:37.820 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:37.820 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:37.824 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 77,3% |
| 18:46:37.824 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 00 f5 fb 0e 9b 01 35 1b 78 2f 1b 3a 00 |
| 18:46:37.845 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.885 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.899 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:37.922 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:37.926 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:37.932 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:37.932 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 0c 00 2b 1e d0 01 00 03 98 00 f0 23 fc |
| 18:46:37.955 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:37.991 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:37.991 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.003 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:38.026 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:38.026 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:38.050 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.050 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.051 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:38.051 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 18 03 9b 2c 00 db 19 03 93 00 23 05 93 |
| 18:46:38.099 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:38.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:38.134 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:38.146 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:38.146 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 24 70 6b 21 00 03 68 04 9a 1b 69 98 47 |
| 18:46:38.160 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.199 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:38.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:38.237 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:38.243 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:38.244 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 30 00 28 17 d0 0e 9a 04 9b 12 78 01 33 |
| 18:46:38.260 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.260 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.299 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:38.337 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:38.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:38.353 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:38.353 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 3c 70 6b 1b 1b 00 2a 3d d1 21 00 03 9a |
| 18:46:38.381 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.420 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.434 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:38.457 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:38.457 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:38.459 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:38.459 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 48 ff f7 c8 fe 77 e7 03 99 00 f0 05 fc |
| 18:46:38.480 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.481 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.521 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.521 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.533 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:38.556 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:38.557 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:38.560 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:38.560 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 54 01 23 32 6d 13 75 24 4b 1b 68 32 33 |
| 18:46:38.583 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.623 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.623 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.635 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:38.658 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:38.658 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:38.666 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:38.667 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 60 93 61 d9 e7 70 6b 03 68 db 69 98 47 |
| 18:46:38.684 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.685 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.724 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.737 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:38.760 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:38.760 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:38.762 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:38.763 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 6c 84 42 06 d1 70 6b 03 68 db 69 98 47 |
| 18:46:38.785 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.785 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.826 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.839 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:38.862 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:38.862 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:38.864 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:38.864 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 78 04 9b 83 42 da d0 70 6b 21 00 03 68 |
| 18:46:38.886 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.927 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.927 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:38.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:38.964 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:38.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:38.974 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:38.974 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 84 db 68 98 47 00 28 24 d0 70 6b 85 68 |
| 18:46:38.990 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:38.990 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.031 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.031 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.043 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:39.066 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:39.066 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:39.072 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:39.073 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 90 6b 1c 05 93 1f 1b 0e 9b 1b 78 00 2b |
| 18:46:39.090 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.131 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:39.169 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:39.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:39.172 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:39.173 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 9c 15 d0 3b 00 21 00 03 9a ff f7 d2 fe |
| 18:46:39.193 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.193 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.235 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.235 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.247 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:39.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:39.272 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:39.289 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:39.289 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef a8 03 9b 05 9c db 19 03 93 04 9b 5d 1b |
| 18:46:39.297 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.297 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.340 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:39.378 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:39.379 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:39.383 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:39.383 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef b4 04 9b a3 42 13 d3 03 9b 06 93 12 e7 |
| 18:46:39.402 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.442 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.455 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:39.479 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:39.479 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:39.481 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:39.481 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef c0 21 00 03 9a ff f7 c2 fe 39 e7 3b 00 |
| 18:46:39.502 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.502 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.542 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.542 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.555 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:39.579 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:39.579 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:39.603 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.618 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:39.619 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef cc 21 00 03 9a ff f7 84 fe e8 e7 04 9b |
| 18:46:39.665 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.665 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:39.701 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:39.701 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:39.717 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:39.717 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef d8 5d 1c 05 9b 2d 1b 00 2b e8 d0 6b 42 |
| 18:46:39.727 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.727 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.767 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.768 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.779 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:39.803 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:39.803 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:39.813 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:39.813 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef e4 5d 41 e8 b2 49 e7 c0 46 34 01 00 10 |
| 18:46:39.831 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.868 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:39.906 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:39.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:39.931 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:39.931 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef f0 30 b5 0f 24 00 25 85 b0 6c 44 25 70 |
| 18:46:39.931 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.976 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:39.976 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:39.989 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:40.013 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:40.013 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:40.025 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:40.026 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef fc 00 94 ff f7 |
| 18:46:40.037 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.038 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.063 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.078 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:40.102 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:40.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:40.113 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:40.127 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6200 with 256 bytes and CRC32 0x66FCC81C |
| 18:46:40.127 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ee 00 01 00 62 00 00 1c c8 fc 66 |
| 18:46:40.129 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.129 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.171 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.171 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:40.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:40.208 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:40.231 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.211 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 78,8% |
| 18:46:40.235 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 00 e4 fe 05 b0 30 bd 30 b5 0f 24 01 25 |
| 18:46:40.282 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.282 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:40.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:40.318 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:40.341 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.342 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.360 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:40.361 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 0c 85 b0 6c 44 25 70 00 94 ff f7 d9 fe |
| 18:46:40.408 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:40.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:40.447 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:40.470 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.502 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:40.502 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 18 05 b0 30 bd 80 b5 00 af 01 4b 18 00 |
| 18:46:40.546 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:40.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:40.583 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:40.598 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:40.598 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 24 bd 46 80 bd c0 00 00 10 f0 b5 00 24 |
| 18:46:40.609 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.610 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.646 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.646 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.660 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:40.683 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:40.684 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:40.697 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:40.697 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 30 01 21 ae 4a ae 4b 14 71 ae 4a 85 b0 |
| 18:46:40.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.751 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.763 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:40.786 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:40.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:40.793 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:40.793 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 3c da 64 ae 4a ae 4b 11 71 ae 4a 49 18 |
| 18:46:40.810 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.810 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.852 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.852 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.864 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:40.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:40.888 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:40.890 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:40.890 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 48 1a 65 1a 00 58 32 11 71 ac 4a 01 31 |
| 18:46:40.910 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.910 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.951 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:40.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:40.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:40.987 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:40.987 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:41.014 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.030 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:41.030 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 54 9a 65 1a 00 60 32 11 71 aa 4a 1c 20 |
| 18:46:41.079 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:41.114 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:41.114 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:41.137 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.137 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.157 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:41.157 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 60 1a 66 aa 4a aa 4d da 60 1c 61 5c 61 |
| 18:46:41.203 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.203 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.216 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:41.239 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:41.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:41.241 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:41.242 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 6c 9c 61 dc 61 5c 62 9c 62 00 f0 8e fb |
| 18:46:41.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.306 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:41.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:41.341 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:41.346 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:41.346 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 78 81 23 5b 00 83 60 44 60 07 00 2b 00 |
| 18:46:41.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.365 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.405 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.405 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.418 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:41.442 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:41.442 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:41.443 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:41.444 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 84 04 20 50 33 ff 30 3b 60 f8 60 00 f0 |
| 18:46:41.466 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.504 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:41.541 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:41.541 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:41.543 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:41.543 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 90 93 fb 03 00 02 1d ff 32 1c 70 01 33 |
| 18:46:41.566 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.566 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.603 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.604 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:41.642 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:41.642 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:41.646 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:41.646 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 9c 93 42 fb d1 03 23 7c 35 38 61 bc 82 |
| 18:46:41.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/4/0 L_Data.ind, low priority hop count 6, tpdu 00 80 14 3f |
| 18:46:41.687 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.728 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.728 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:41.763 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:41.763 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:41.765 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:41.765 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef a8 bb 61 3d 60 20 20 00 f0 71 fb 80 25 |
| 18:46:41.787 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.787 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.826 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.840 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:41.863 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:41.863 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:41.865 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:41.865 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef b4 97 4b 6d 00 83 60 97 4b 45 60 03 60 |
| 18:46:41.888 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.925 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.925 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:41.940 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:41.963 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:41.963 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:41.971 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:41.971 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef c0 c5 60 04 00 28 00 00 f0 77 fb 00 22 |
| 18:46:41.987 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:41.987 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.027 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.027 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.042 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:42.065 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:42.069 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:42.073 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:42.074 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef cc 03 00 41 19 1a 70 01 33 8b 42 fb d1 |
| 18:46:42.090 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.090 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.132 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.133 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:42.168 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:42.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:42.173 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:42.173 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef d8 20 61 22 75 a2 61 20 00 e5 61 fe f7 |
| 18:46:42.193 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.193 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.233 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.247 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:42.271 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:42.272 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:42.294 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.318 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:42.318 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef e4 57 f8 e2 68 01 1e 20 69 00 d1 f6 e0 |
| 18:46:42.363 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.377 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:42.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:42.405 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:42.412 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:42.412 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef f0 00 f0 35 fb 00 26 89 4b 18 20 23 60 |
| 18:46:42.428 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.428 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.482 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:42.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:42.505 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:42.524 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:42.524 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef fc 26 75 a6 61 |
| 18:46:42.533 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.533 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.558 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.558 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.572 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:42.596 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:42.596 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:42.619 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:42.621 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.621 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.634 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6300 with 256 bytes and CRC32 0x484D7671 |
| 18:46:42.634 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ee 00 01 00 63 00 00 71 76 4d 48 |
| 18:46:42.674 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.688 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:42.712 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:42.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:42.713 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 80,3% |
| 18:46:42.713 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 00 00 f0 48 fb 86 4b 01 90 03 93 86 4b |
| 18:46:42.734 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.774 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.788 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:42.811 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:42.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:42.834 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.834 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.848 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:42.849 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 0c 03 9a 83 60 01 23 5b 42 c3 60 84 4b |
| 18:46:42.893 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.893 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.907 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:42.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:42.931 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:42.943 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:42.943 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 18 42 60 03 60 06 61 46 61 08 20 73 4d |
| 18:46:42.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:42.994 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:42.994 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.008 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:43.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:43.032 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:43.056 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.056 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.092 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:43.093 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 24 00 f0 36 fb 80 4b 03 99 1a 00 58 33 |
| 18:46:43.139 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.151 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:43.174 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:43.174 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:43.179 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:43.179 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 30 6b 65 01 23 40 32 02 60 5b 42 02 90 |
| 18:46:43.198 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.241 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.253 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:43.276 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:43.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:43.300 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.312 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:43.312 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 3c 41 60 17 20 0b 81 ae 65 8e 72 2e 66 |
| 18:46:43.359 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.359 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:43.394 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:43.394 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:43.398 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:43.398 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 48 6e 66 00 f0 35 fb 02 00 03 00 17 32 |
| 18:46:43.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->1/2/40 L_Data.ind, normal priority hop count 5, tpdu 00 80 b9 |
| 18:46:43.439 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.477 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.477 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:43.515 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:43.515 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:43.542 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.543 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.549 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:43.549 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 54 1e 70 01 33 9a 42 fb d1 e8 66 17 20 |
| 18:46:43.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->1/2/60 L_Data.ind, normal priority hop count 5, tpdu 00 80 00 |
| 18:46:43.604 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.604 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.616 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:43.639 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:43.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:43.651 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:43.651 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 60 00 f0 2a fb 02 00 03 00 00 21 17 32 |
| 18:46:43.664 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.664 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.704 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.704 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:43.739 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:43.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:43.755 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:43.755 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 6c 19 70 01 33 93 42 fb d1 28 67 17 20 |
| 18:46:43.765 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->1/2/50 L_Data.ind, normal priority hop count 5, tpdu 00 80 b9 |
| 18:46:43.782 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.824 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.824 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:43.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:43.860 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:43.879 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:43.879 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 78 00 f0 1e fb 02 00 03 00 00 21 17 32 |
| 18:46:43.885 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->1/2/20 L_Data.ind, normal priority hop count 5, tpdu 00 80 b1 |
| 18:46:43.946 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:43.946 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:43.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:43.982 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:43.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:43.996 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:43.996 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 84 19 70 01 33 9a 42 fb d1 68 4b 68 67 |
| 18:46:44.008 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.008 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.048 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.048 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.061 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:44.084 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:44.084 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:44.088 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:44.088 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 90 70 20 6b 65 00 f0 fe fa 54 35 05 60 |
| 18:46:44.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->1/2/80 L_Data.ind, normal priority hop count 5, tpdu 00 80 5d |
| 18:46:44.128 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.128 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.168 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 28 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.181 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:44.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:44.207 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:44.214 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:44.214 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 9c 06 00 17 20 00 f0 0a fb 01 00 03 00 |
| 18:46:44.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->2/2/70 L_Data.ind, normal priority hop count 5, tpdu 00 80 ff |
| 18:46:44.249 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 32 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.249 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.289 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.302 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:44.325 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:44.325 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:44.328 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:44.328 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef a8 00 22 17 31 1a 70 01 33 99 42 fb d1 |
| 18:46:44.353 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 36 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.353 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.389 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.389 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:44.426 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:44.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:44.427 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:44.428 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef b4 50 4b 70 60 b3 61 5e 4b 30 68 f3 61 |
| 18:46:44.451 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.8->2/2/60 L_Data.ind, normal priority hop count 5, tpdu 00 80 ff |
| 18:46:44.471 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.471 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.511 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.511 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:44.546 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:44.546 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:44.551 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:44.551 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef c0 5d 4b b2 84 33 62 03 68 5b 6b 98 47 |
| 18:46:44.571 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.612 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:44.648 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:44.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:44.653 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:44.653 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef cc 05 00 00 f0 f3 fa 00 22 03 00 01 3d |
| 18:46:44.673 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.674 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.716 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.727 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:44.751 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:44.751 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:44.757 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:44.757 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef d8 00 2d 00 db 82 e0 03 22 30 65 b3 1d |
| 18:46:44.775 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.818 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.830 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:44.853 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:44.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:44.870 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:44.870 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef e4 db 7f 00 20 02 33 13 40 f2 1d d3 77 |
| 18:46:44.883 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.920 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.920 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:44.932 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:44.955 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:44.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:44.961 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:44.961 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef f0 33 00 3f 4d 51 4a 2c 33 18 70 2b 1d |
| 18:46:44.979 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:44.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.022 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.022 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:45.057 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:45.057 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:45.079 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:45.079 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef fc da 67 2b 00 |
| 18:46:45.083 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.119 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.119 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:45.155 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:45.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:45.168 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:45.169 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6400 with 256 bytes and CRC32 0x9470C9B2 |
| 18:46:45.170 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ee 00 01 00 64 00 00 b2 c9 70 94 |
| 18:46:45.182 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.182 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.215 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.229 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:45.253 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:45.253 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:45.255 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 81,8% |
| 18:46:45.255 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 00 01 21 08 33 d9 67 2b 00 88 33 1f 60 |
| 18:46:45.276 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.276 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.318 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.318 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:45.352 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:45.352 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:45.376 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:45.377 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 0c 2b 00 02 99 8c 33 19 60 2b 00 94 33 |
| 18:46:45.379 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.425 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.438 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:45.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:45.461 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:45.466 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:45.467 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 18 18 60 2b 00 01 00 a0 33 19 70 36 4b |
| 18:46:45.484 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.524 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:45.561 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:45.561 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:45.584 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.584 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.586 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:45.586 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 24 ee 67 03 93 de 64 45 4b 28 00 1a 60 |
| 18:46:45.632 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.632 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:45.669 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:45.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:45.671 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:45.671 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 30 32 6a 54 30 5a 60 2b 00 a4 33 1c 60 |
| 18:46:45.691 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.732 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.732 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.745 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:45.768 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:45.768 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:45.778 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:45.779 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 3c 2b 00 a8 33 19 60 2b 00 ac 33 19 60 |
| 18:46:45.791 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.791 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.831 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:45.868 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:45.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:45.884 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:45.884 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 48 2b 00 b0 33 19 70 2b 00 23 22 b4 33 |
| 18:46:45.890 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:45.949 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:45.973 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:45.973 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:45.997 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:45.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.001 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:46.001 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 54 1a 60 2b 00 2a 68 b8 33 1a 60 2b 00 |
| 18:46:46.048 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.048 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.066 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:46.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:46.084 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:46.087 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:46.087 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 60 01 9a 90 33 1a 60 37 4b 6b 65 2b 00 |
| 18:46:46.107 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.149 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.150 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:46.186 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:46.186 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:46.199 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:46.199 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 6c bc 33 1f 60 2b 00 c0 33 1c 60 2b 00 |
| 18:46:46.210 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.210 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.251 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.251 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:46.288 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:46.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:46.307 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:46.307 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 78 c4 33 1a 60 2b 00 08 24 02 9a c8 33 |
| 18:46:46.316 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 0d 46 |
| 18:46:46.338 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.338 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.378 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.390 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:46.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:46.413 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:46.429 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:46.429 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 84 1a 60 30 49 30 4a 00 f0 61 fa 30 4b |
| 18:46:46.443 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.478 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.478 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:46.515 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:46.515 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:46.519 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:46.519 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 90 00 22 01 3c 1a 60 5a 60 08 33 94 42 |
| 18:46:46.539 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.539 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.580 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.580 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:46.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:46.615 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:46.636 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:46.636 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 9c f8 d1 ff f7 bd fe 03 9b 6c 62 98 66 |
| 18:46:46.659 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.660 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.699 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.699 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:46.736 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:46.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:46.738 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:46.738 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef a8 2a 4b ec 62 ab 60 07 23 eb 60 29 4b |
| 18:46:46.774 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.774 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.799 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:46.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:46.836 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:46.838 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:46.838 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef b4 2b 61 29 4b 6b 61 29 4b ab 61 14 23 |
| 18:46:46.859 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.899 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.899 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.912 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:46.936 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:46.936 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:46.946 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:46.946 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef c0 eb 61 28 4b 2b 62 28 4b 2b 63 28 4b |
| 18:46:46.961 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:46.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:46.999 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.014 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:47.037 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:47.037 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:47.042 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:47.042 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef cc 6b 63 ff 23 ac 63 ec 63 2c 64 6c 64 |
| 18:46:47.064 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.103 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.116 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:47.139 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:47.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:47.143 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:47.143 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef d8 ab 64 05 b0 f0 bd 00 f0 0b fa 07 e7 |
| 18:46:47.164 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.165 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.204 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.204 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:47.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:47.242 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:47.245 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:47.245 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef e4 1a 70 01 3d 01 33 75 e7 80 01 00 10 |
| 18:46:47.266 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.306 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:47.342 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:47.342 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:47.351 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:47.351 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef f0 34 01 00 10 00 c0 00 40 84 02 00 10 |
| 18:46:47.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.365 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.420 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:47.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:47.445 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:47.448 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:47.448 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef fc 34 02 00 10 |
| 18:46:47.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.496 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.496 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:47.533 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:47.534 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:47.536 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:47.536 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6500 with 256 bytes and CRC32 0x70C1D77C |
| 18:46:47.536 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ee 00 01 00 65 00 00 7c d7 c1 70 |
| 18:46:47.558 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.558 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.595 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.607 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:47.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:47.631 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:47.635 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 83,3% |
| 18:46:47.635 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 00 00 00 01 40 00 40 01 40 00 80 01 40 |
| 18:46:47.656 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.696 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.696 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.709 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:47.733 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:47.733 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:47.756 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.756 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.757 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:47.757 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 0c 0c 6f 00 00 d4 6e 00 00 ff 01 00 00 |
| 18:46:47.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6 repeat, tpdu 00 80 14 38 |
| 18:46:47.822 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.836 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:47.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:47.862 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:47.869 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:47.869 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 18 7c 6f 00 00 f4 70 00 00 88 01 00 10 |
| 18:46:47.887 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.887 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.925 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.925 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:47.939 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:47.962 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:47.962 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:47.980 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:47.980 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 24 e1 10 00 00 f4 6f 00 00 d4 6f 00 00 |
| 18:46:47.988 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:47.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.028 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.029 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:48.065 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:48.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:48.089 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.089 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.135 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:48.135 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 30 60 70 00 00 28 c2 01 00 29 82 69 00 |
| 18:46:48.183 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.197 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:48.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:48.221 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:48.243 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.244 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.245 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:48.245 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 3c 40 82 5c 00 d4 00 00 10 a0 70 00 00 |
| 18:46:48.293 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.306 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:48.329 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:48.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:48.334 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:48.334 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 48 63 36 00 00 e0 00 00 10 00 02 00 10 |
| 18:46:48.355 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.355 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.392 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.392 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:48.430 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:48.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:48.452 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.459 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:48.459 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 54 2b 83 38 00 10 27 00 00 20 4e 00 00 |
| 18:46:48.504 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.504 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.518 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:48.541 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:48.541 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:48.564 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.564 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.569 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:48.569 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 60 08 52 00 00 dc 05 00 00 6f 07 00 00 |
| 18:46:48.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.628 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:48.651 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:48.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:48.674 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:48.674 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 6c cc 07 00 00 8e 21 20 20 1a 4b 89 00 |
| 18:46:48.679 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.725 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.725 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:48.760 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:48.764 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:48.785 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.810 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:48.810 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 78 5a 58 82 43 5a 50 00 22 71 39 1a 62 |
| 18:46:48.861 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.861 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:48.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:48.892 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:48.919 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:48.919 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:48.962 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:48.962 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 84 ff 39 c0 46 01 39 00 29 fb d1 01 22 |
| 18:46:49.009 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.010 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.022 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:49.045 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:49.045 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:49.059 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:49.060 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 90 1a 64 5a 64 59 64 5a 64 59 6c 11 42 |
| 18:46:49.071 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.071 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.110 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.124 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:49.147 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:49.147 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:49.153 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:49.153 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 9c fc d0 23 22 8e 21 80 20 9a 60 89 00 |
| 18:46:49.172 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.172 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.213 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.213 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.226 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:49.249 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:49.249 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:49.273 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.273 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.278 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:49.279 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef a8 5a 58 82 43 5a 50 01 22 d9 68 11 42 |
| 18:46:49.324 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.324 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.337 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:49.361 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:49.361 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:49.376 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:49.376 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef b4 fc d0 03 21 19 67 00 21 5a 67 59 67 |
| 18:46:49.386 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.386 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.425 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.425 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:49.463 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:49.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:49.471 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:49.472 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef c0 5a 67 01 22 59 6f 11 42 fc d0 9a 67 |
| 18:46:49.487 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.529 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.529 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.541 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:49.564 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:49.565 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:49.569 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:49.569 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef cc 05 49 06 4b d9 67 06 4b 1a 60 06 4b |
| 18:46:49.592 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.631 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.631 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.643 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:49.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:49.666 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:49.680 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:49.680 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef d8 1a 60 06 4b 1a 60 70 47 00 80 04 40 |
| 18:46:49.691 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.731 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.731 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.744 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:49.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:49.767 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:49.774 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:49.774 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef e4 5f 00 01 00 04 80 04 40 94 80 04 40 |
| 18:46:49.790 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.790 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.833 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.833 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:49.868 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:49.868 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:49.872 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:49.872 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef f0 98 80 04 40 9c 80 04 40 00 22 43 08 |
| 18:46:49.893 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.1->4/1/5 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
| 18:46:49.915 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.955 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:49.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:49.968 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:49.992 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:49.992 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:49.995 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:49.995 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef fc 8b 42 74 d3 |
| 18:46:50.016 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.016 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.043 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.043 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:50.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:50.082 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:50.085 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:50.086 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6600 with 256 bytes and CRC32 0x390015ED |
| 18:46:50.086 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ee 00 01 00 66 00 00 ed 15 00 39 |
| 18:46:50.124 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.125 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.162 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.175 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:50.198 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:50.198 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:50.202 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 84,8% |
| 18:46:50.202 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 03 09 8b 42 5f d3 03 0a 8b 42 44 d3 |
| 18:46:50.224 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.224 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.264 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.264 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.277 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:50.300 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:50.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:50.303 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:50.303 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c 03 0b 8b 42 28 d3 03 0c 8b 42 0d d3 |
| 18:46:50.325 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 8 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.325 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.363 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.377 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:50.400 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:50.401 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:50.424 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 12 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.424 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.436 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:50.436 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 18 ff 22 09 02 12 ba 03 0c 8b 42 02 d3 |
| 18:46:50.447 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.1->4/4/0 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
| 18:46:50.487 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.487 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.501 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:50.525 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:50.525 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:50.532 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:50.532 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 24 12 12 09 02 65 d0 03 0b 8b 42 19 d3 |
| 18:46:50.548 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.588 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.588 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.604 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:50.624 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:50.625 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:50.648 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.673 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:50.673 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 30 00 e0 09 0a c3 0b 8b 42 01 d3 cb 03 |
| 18:46:50.719 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.732 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:50.755 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:50.755 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:50.762 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:50.762 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 3c c0 1a 52 41 83 0b 8b 42 01 d3 8b 03 |
| 18:46:50.778 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.778 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.821 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:50.855 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:50.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:50.863 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:50.863 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 48 c0 1a 52 41 43 0b 8b 42 01 d3 4b 03 |
| 18:46:50.879 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.919 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.919 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:50.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:50.957 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:50.981 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:50.981 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:50.987 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:50.987 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 54 c0 1a 52 41 03 0b 8b 42 01 d3 0b 03 |
| 18:46:51.034 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:51.069 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:51.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:51.090 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:51.090 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 60 c0 1a 52 41 c3 0a 8b 42 01 d3 cb 02 |
| 18:46:51.095 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.095 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.140 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.140 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:51.177 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:51.177 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:51.201 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.202 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.212 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:51.212 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 6c c0 1a 52 41 83 0a 8b 42 01 d3 8b 02 |
| 18:46:51.257 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.257 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.271 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:51.294 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:51.294 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:51.299 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:51.299 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 78 c0 1a 52 41 43 0a 8b 42 01 d3 4b 02 |
| 18:46:51.319 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.361 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.361 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:51.397 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:51.397 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:51.401 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:51.401 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 84 c0 1a 52 41 03 0a 8b 42 01 d3 0b 02 |
| 18:46:51.420 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.465 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:51.499 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:51.499 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:51.526 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.526 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.542 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:51.542 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 90 c0 1a 52 41 cd d2 c3 09 8b 42 01 d3 |
| 18:46:51.588 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.601 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:51.624 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:51.624 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:51.636 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:51.636 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 9c cb 01 c0 1a 52 41 83 09 8b 42 01 d3 |
| 18:46:51.648 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.688 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:51.726 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:51.726 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:51.729 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:51.729 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef a8 8b 01 c0 1a 52 41 43 09 8b 42 01 d3 |
| 18:46:51.750 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.750 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.793 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.805 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:51.828 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:51.828 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:51.850 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:51.851 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef b4 4b 01 c0 1a 52 41 03 09 8b 42 01 d3 |
| 18:46:51.854 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.897 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:51.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:51.934 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:51.939 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:51.939 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef c0 0b 01 c0 1a 52 41 c3 08 8b 42 01 d3 |
| 18:46:51.956 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.956 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:51.997 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:51.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:52.034 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:52.034 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:52.055 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:52.055 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef cc cb 00 c0 1a 52 41 83 08 8b 42 01 d3 |
| 18:46:52.056 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.057 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:52.138 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:52.138 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:52.143 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:52.144 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef d8 8b 00 c0 1a 52 41 43 08 8b 42 01 d3 |
| 18:46:52.162 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.203 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.203 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.217 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:52.240 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:52.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:52.244 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:52.245 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef e4 4b 00 c0 1a 52 41 41 1a 00 d2 01 46 |
| 18:46:52.265 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.265 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.304 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.304 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:52.342 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:52.342 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:52.346 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:52.353 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef f0 52 41 10 46 70 47 ff e7 01 b5 00 20 |
| 18:46:52.369 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.370 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.407 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.421 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:52.444 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:52.444 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:52.448 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:52.448 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef fc 00 f0 f0 f8 |
| 18:46:52.470 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.498 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.512 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:52.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:52.536 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:52.538 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:52.539 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6700 with 256 bytes and CRC32 0x5CA6AFEB |
| 18:46:52.539 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ee 00 01 00 67 00 00 eb af a6 5c |
| 18:46:52.560 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.595 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.596 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.609 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:52.633 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:52.633 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:52.636 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 86,3% |
| 18:46:52.647 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 00 02 bd c0 46 00 29 f7 d0 76 e7 70 47 |
| 18:46:52.658 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.658 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.697 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.697 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:52.734 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:52.734 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:52.736 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:52.736 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 0c 03 46 0b 43 7f d4 00 22 43 08 8b 42 |
| 18:46:52.758 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.797 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.797 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.811 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:52.834 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:52.834 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:52.839 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:52.839 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 18 74 d3 03 09 8b 42 5f d3 03 0a 8b 42 |
| 18:46:52.859 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.899 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.899 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:52.913 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:52.936 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:52.937 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:52.944 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:52.944 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 24 44 d3 03 0b 8b 42 28 d3 03 0c 8b 42 |
| 18:46:52.961 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:52.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.001 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.001 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.015 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:53.039 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:53.039 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:53.042 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:53.042 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 30 0d d3 ff 22 09 02 12 ba 03 0c 8b 42 |
| 18:46:53.063 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.102 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.102 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.116 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:53.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:53.146 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:53.169 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.169 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.193 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:53.193 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 3c 02 d3 12 12 09 02 65 d0 03 0b 8b 42 |
| 18:46:53.238 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.238 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.252 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:53.275 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:53.275 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:53.292 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:53.292 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 48 19 d3 00 e0 09 0a c3 0b 8b 42 01 d3 |
| 18:46:53.301 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.301 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.340 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.353 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:53.376 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:53.376 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:53.400 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.400 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.429 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:53.430 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 54 cb 03 c0 1a 52 41 83 0b 8b 42 01 d3 |
| 18:46:53.474 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:53.511 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:53.511 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:53.526 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:53.526 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 60 8b 03 c0 1a 52 41 43 0b 8b 42 01 d3 |
| 18:46:53.535 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.577 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.577 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:53.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:53.612 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:53.621 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:53.621 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 6c 4b 03 c0 1a 52 41 03 0b 8b 42 01 d3 |
| 18:46:53.636 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.636 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:53.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:53.714 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:53.738 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.738 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.741 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:53.741 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 78 0b 03 c0 1a 52 41 c3 0a 8b 42 01 d3 |
| 18:46:53.787 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.788 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:53.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:53.823 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:53.826 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:53.826 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 84 cb 02 c0 1a 52 41 83 0a 8b 42 01 d3 |
| 18:46:53.849 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.887 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.887 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:53.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:53.924 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:53.951 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:53.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:53.953 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:53.953 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 90 8b 02 c0 1a 52 41 43 0a 8b 42 01 d3 |
| 18:46:54.000 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.012 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:54.036 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:54.036 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:54.048 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:54.048 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 9c 4b 02 c0 1a 52 41 03 0a 8b 42 01 d3 |
| 18:46:54.063 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.100 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.100 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.112 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:54.135 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:54.135 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:54.160 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.165 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:54.165 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef a8 0b 02 c0 1a 52 41 cd d2 c3 09 8b 42 |
| 18:46:54.210 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.210 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.224 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:54.247 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:54.247 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:54.272 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.272 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.280 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:54.280 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef b4 01 d3 cb 01 c0 1a 52 41 83 09 8b 42 |
| 18:46:54.330 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.330 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.339 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:54.363 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:54.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:54.365 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:54.365 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef c0 01 d3 8b 01 c0 1a 52 41 43 09 8b 42 |
| 18:46:54.388 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.429 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:54.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:54.463 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:54.487 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.524 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:54.524 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef cc 01 d3 4b 01 c0 1a 52 41 03 09 8b 42 |
| 18:46:54.570 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.570 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.583 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:54.606 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:54.606 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:54.613 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:54.613 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef d8 01 d3 0b 01 c0 1a 52 41 c3 08 8b 42 |
| 18:46:54.634 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.672 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.692 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:54.709 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:54.709 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:54.710 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:54.710 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef e4 01 d3 cb 00 c0 1a 52 41 83 08 8b 42 |
| 18:46:54.731 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.731 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.770 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.770 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.786 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:54.808 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:54.808 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:54.831 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.839 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:54.839 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef f0 01 d3 8b 00 c0 1a 52 41 43 08 8b 42 |
| 18:46:54.883 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.897 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:54.921 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:54.921 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:54.922 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:54.922 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef fc 01 d3 4b 00 |
| 18:46:54.944 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.972 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:54.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:54.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:55.009 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:55.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:55.012 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:55.012 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6800 with 256 bytes and CRC32 0x3EB05E4E |
| 18:46:55.019 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ee 00 01 00 68 00 00 4e 5e b0 3e |
| 18:46:55.033 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.033 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.069 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.069 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.082 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:55.105 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:55.107 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:55.109 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 87,9% |
| 18:46:55.113 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 00 c0 1a 52 41 41 1a 00 d2 01 46 52 41 |
| 18:46:55.131 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.172 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.172 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:55.208 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:55.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:55.211 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:55.211 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 0c 10 46 70 47 5d e0 ca 0f 00 d0 49 42 |
| 18:46:55.232 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.232 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.274 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.274 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.286 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:55.309 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:55.309 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:55.312 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:55.312 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 18 03 10 00 d3 40 42 53 40 00 22 9c 46 |
| 18:46:55.333 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.373 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.373 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.387 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:55.410 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:55.411 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:55.413 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:55.414 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 24 03 09 8b 42 2d d3 03 0a 8b 42 12 d3 |
| 18:46:55.435 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.435 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.475 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:55.511 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:55.511 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:55.513 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:55.514 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 30 fc 22 89 01 12 ba 03 0a 8b 42 0c d3 |
| 18:46:55.534 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.535 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.573 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.573 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:55.611 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:55.611 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:55.624 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:55.624 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 3c 89 01 92 11 8b 42 08 d3 89 01 92 11 |
| 18:46:55.639 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.690 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:55.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:55.713 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:55.726 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:55.726 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 48 8b 42 04 d3 89 01 3a d0 92 11 00 e0 |
| 18:46:55.742 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.782 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.795 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:55.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:55.818 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:55.821 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:55.821 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 54 89 09 c3 09 8b 42 01 d3 cb 01 c0 1a |
| 18:46:55.842 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.884 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.884 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.896 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:55.919 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:55.919 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:55.922 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:55.922 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 60 52 41 83 09 8b 42 01 d3 8b 01 c0 1a |
| 18:46:55.945 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.945 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.985 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:55.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:55.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:56.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:56.019 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:56.032 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:56.032 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 6c 52 41 43 09 8b 42 01 d3 4b 01 c0 1a |
| 18:46:56.044 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.083 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.097 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:56.120 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:56.120 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:56.122 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:56.122 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 78 52 41 03 09 8b 42 01 d3 0b 01 c0 1a |
| 18:46:56.145 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.145 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.182 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.200 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:56.220 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:56.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:56.235 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:56.235 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 84 52 41 c3 08 8b 42 01 d3 cb 00 c0 1a |
| 18:46:56.244 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.244 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.283 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.283 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.297 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:56.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:56.320 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:56.339 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:56.339 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 90 52 41 83 08 8b 42 01 d3 8b 00 c0 1a |
| 18:46:56.346 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.346 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.385 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.386 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:56.422 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:56.422 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:56.445 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:56.445 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 9c 52 41 d9 d2 43 08 8b 42 01 d3 4b 00 |
| 18:46:56.446 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.446 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.492 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.492 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.504 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:56.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:56.528 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:56.545 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:56.545 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef a8 c0 1a 52 41 41 1a 00 d2 01 46 63 46 |
| 18:46:56.555 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.555 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.591 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.591 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.605 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:56.628 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:56.628 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:56.642 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:56.642 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef b4 52 41 5b 10 10 46 01 d3 40 42 00 2b |
| 18:46:56.653 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.653 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.691 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:56.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:56.729 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:56.754 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.754 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.754 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:56.754 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef c0 00 d5 49 42 70 47 63 46 5b 10 00 d3 |
| 18:46:56.801 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:56.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:56.838 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:56.863 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.863 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:56.946 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:56.946 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef cc 40 42 01 b5 00 20 00 f0 05 f8 02 bd |
| 18:46:56.993 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:56.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.005 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:57.028 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:57.028 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:57.052 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.052 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.060 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:57.060 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef d8 00 29 f8 d0 16 e7 70 47 70 47 c0 46 |
| 18:46:57.106 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.106 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.120 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:57.143 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:57.143 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:57.154 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:57.154 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef e4 03 b4 71 46 49 08 40 00 49 00 09 5a |
| 18:46:57.168 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.207 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.220 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:57.244 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:57.244 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:57.246 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:57.247 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef f0 49 00 8e 44 03 bc 70 47 03 00 82 18 |
| 18:46:57.267 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.267 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.307 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:57.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:57.343 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:57.346 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:57.346 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef fc 93 42 00 d1 |
| 18:46:57.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.396 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.396 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:57.432 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:57.432 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:57.434 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:57.456 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.456 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.478 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6900 with 256 bytes and CRC32 0x5C2B7BDD |
| 18:46:57.484 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ee 00 01 00 69 00 00 dd 7b 2b 5c |
| 18:46:57.525 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.525 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:57.562 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:57.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:57.587 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.567 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 89,4% |
| 18:46:57.599 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 00 70 47 19 70 01 33 f9 e7 70 b5 00 26 |
| 18:46:57.645 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.645 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:57.680 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:57.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:57.686 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:57.686 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 0c 0c 4c 0d 4d 64 1b a4 10 a6 42 09 d1 |
| 18:46:57.706 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.706 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.746 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.748 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.760 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:57.783 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:57.783 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:57.788 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:57.788 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 18 00 26 00 f0 a9 fb 0a 4c 0a 4d 64 1b |
| 18:46:57.806 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.806 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.846 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.859 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:57.883 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:57.883 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:57.886 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:57.886 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 24 a4 10 a6 42 05 d1 70 bd b3 00 eb 58 |
| 18:46:57.906 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.906 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.947 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:57.947 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:57.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:57.983 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:57.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:57.985 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:57.985 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 30 98 47 01 36 ee e7 b3 00 eb 58 98 47 |
| 18:46:58.009 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.047 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.047 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:58.083 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:58.083 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:58.086 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:58.086 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 3c 01 36 f2 e7 7c 71 00 00 7c 71 00 00 |
| 18:46:58.109 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.1->4/1/22 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
| 18:46:58.136 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.170 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:58.206 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:58.206 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:58.218 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:58.218 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 48 84 71 00 00 7c 71 00 00 03 00 10 b5 |
| 18:46:58.231 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.270 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.270 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:46:58.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:46:58.307 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:46:58.310 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:58.310 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 54 08 00 19 00 00 f0 0a f8 10 bd 00 23 |
| 18:46:58.330 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.330 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.372 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.372 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:46:58.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:46:58.408 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:46:58.415 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:58.415 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 60 10 b5 9a 42 00 d1 10 bd cc 5c c4 54 |
| 18:46:58.434 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.434 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.474 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.474 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:46:58.509 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:46:58.509 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:46:58.514 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:58.514 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 6c 01 33 f8 e7 10 b5 04 00 04 48 13 00 |
| 18:46:58.535 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.535 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.575 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:46:58.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:46:58.612 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:46:58.621 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:58.621 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 78 00 28 04 d0 0a 00 02 20 21 00 00 e0 |
| 18:46:58.640 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.640 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.677 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.701 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:46:58.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:46:58.714 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:46:58.733 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:58.733 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 84 00 bf 10 bd 00 00 00 00 10 b5 00 f0 |
| 18:46:58.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.1->4/4/20 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
| 18:46:58.761 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.761 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.801 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 72 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.801 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.814 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:46:58.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:46:58.838 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:46:58.861 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.862 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.868 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:58.869 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 90 17 f8 10 bd 10 b5 04 1e 00 d1 01 34 |
| 18:46:58.886 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.1->4/1/32 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
| 18:46:58.929 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:46:58.964 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:46:58.965 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:46:58.990 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 80 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:58.990 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:58.998 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:58.998 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 9c 20 00 00 f0 41 f8 00 28 00 d0 10 bd |
| 18:46:59.013 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.1->4/4/30 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
| 18:46:59.054 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.054 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:46:59.091 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:46:59.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:46:59.107 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:59.107 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef a8 00 f0 0e f8 00 28 01 d1 00 f0 10 f8 |
| 18:46:59.117 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 85 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.117 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.155 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.168 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:46:59.191 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:46:59.191 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:46:59.217 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 89 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.217 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.223 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:59.223 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef b4 80 47 f1 e7 10 b5 ff f7 eb ff 10 bd |
| 18:46:59.271 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.271 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.282 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:46:59.305 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:46:59.305 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:46:59.326 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:59.326 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef c0 10 b5 00 f0 39 f8 10 bd 01 4b 18 68 |
| 18:46:59.336 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 93 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.374 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.374 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.388 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:46:59.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:46:59.411 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:46:59.418 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:59.418 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef cc 70 47 c0 46 a0 02 00 10 fe e7 ff ff |
| 18:46:59.435 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 97 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.435 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.475 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:46:59.512 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:46:59.512 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:46:59.528 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:59.528 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef d8 06 48 07 49 09 1a 8b 10 c9 0f c9 18 |
| 18:46:59.538 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 101 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.575 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:46:59.613 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:46:59.613 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:46:59.616 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:59.616 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef e4 10 b5 49 10 03 d0 04 4b 00 2b 00 d0 |
| 18:46:59.639 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 105 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.677 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:46:59.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:46:59.715 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:46:59.723 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:59.723 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef f0 98 47 10 bd 34 01 00 10 34 01 00 10 |
| 18:46:59.741 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 109 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.779 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.779 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:46:59.816 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:46:59.817 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:46:59.833 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:59.833 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef fc 00 00 00 00 |
| 18:46:59.843 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 113 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.872 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.885 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:46:59.908 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:46:59.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:46:59.935 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 117 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:46:59.935 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:46:59.962 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:46:59.966 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6A00 with 256 bytes and CRC32 0xFCFD5CC9 |
| 18:47:00.004 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ee 00 01 00 6a 00 00 c9 5c fd fc |
| 18:47:00.046 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.058 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:47:00.081 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:47:00.081 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:47:00.086 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 90,9% |
| 18:47:00.090 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 00 05 4b 10 b5 00 2b 03 d0 04 49 05 48 |
| 18:47:00.107 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 121 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.107 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.146 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.161 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:47:00.184 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:47:00.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:47:00.187 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:00.187 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 0c 00 e0 00 bf ff f7 e2 ff 10 bd c0 46 |
| 18:47:00.208 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 125 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.248 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.248 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.262 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:47:00.285 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:47:00.285 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:47:00.301 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:00.301 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 18 00 00 00 00 a4 02 00 10 90 71 00 00 |
| 18:47:00.313 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 129 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.349 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.349 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.363 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:47:00.386 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:47:00.386 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:47:00.389 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:00.392 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 24 10 b5 03 4b 01 00 18 68 00 f0 30 f8 |
| 18:47:00.411 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 133 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.453 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.453 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.463 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:47:00.486 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:47:00.486 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:47:00.499 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:00.499 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 30 10 bd c0 46 e4 00 00 10 10 b5 03 4b |
| 18:47:00.513 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 137 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.553 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.553 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:47:00.589 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:47:00.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:47:00.592 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:00.593 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 3c 01 00 18 68 00 f0 c4 f8 10 bd c0 46 |
| 18:47:00.613 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 141 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.614 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.656 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:47:00.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:47:00.691 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:47:00.698 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:00.698 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 48 e4 00 00 10 70 b5 0f 4e 0d 00 31 68 |
| 18:47:00.720 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 145 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.758 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.758 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.770 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:47:00.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:47:00.793 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:47:00.804 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:00.804 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 54 04 00 00 29 02 d1 00 f0 a3 f8 30 60 |
| 18:47:00.818 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 149 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.818 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.860 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.860 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:47:00.895 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:47:00.895 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:47:00.900 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:00.900 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 60 29 00 20 00 00 f0 9e f8 43 1c 03 d1 |
| 18:47:00.923 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 153 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.961 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:00.961 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:00.975 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:47:00.998 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:47:00.998 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:47:01.001 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:01.001 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 6c 01 25 6d 42 28 00 70 bd 03 23 c5 1c |
| 18:47:01.023 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 157 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.025 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.064 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.064 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.075 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:47:01.101 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:47:01.101 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:47:01.105 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:01.105 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 78 9d 43 a8 42 f8 d0 29 1a 20 00 00 f0 |
| 18:47:01.126 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 161 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.126 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.167 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.179 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:47:01.202 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:47:01.202 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:47:01.204 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:01.204 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 84 8f f8 01 30 f2 d1 ef e7 bc 02 00 10 |
| 18:47:01.230 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 165 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.230 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.268 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.268 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.281 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:47:01.304 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:47:01.304 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:47:01.306 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:01.306 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 90 03 23 f7 b5 cd 1c 9d 43 08 35 06 00 |
| 18:47:01.328 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.329 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.367 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.367 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.381 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:47:01.404 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:47:01.404 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:47:01.407 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:01.407 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 9c 0c 2d 34 d2 0c 25 a9 42 33 d8 30 00 |
| 18:47:01.428 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.428 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.468 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.482 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:47:01.505 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:47:01.505 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:47:01.522 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:01.522 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef a8 00 f0 6c f8 34 4f 3b 68 1c 00 00 2c |
| 18:47:01.531 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.531 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.575 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:47:01.610 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:47:01.610 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:47:01.628 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:01.628 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef b4 2f d1 29 00 30 00 ff f7 c7 ff 04 00 |
| 18:47:01.638 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.638 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.678 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.678 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.690 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:47:01.713 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:47:01.713 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:47:01.726 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:01.726 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef c0 43 1c 58 d1 3c 68 21 00 00 29 49 d1 |
| 18:47:01.738 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.738 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.779 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 186 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.780 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:47:01.815 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:47:01.815 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:47:01.825 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:01.825 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef cc 00 2c 4c d0 23 68 30 00 e3 18 01 93 |
| 18:47:01.837 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.837 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.878 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.878 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:47:01.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:47:01.919 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:47:01.921 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:01.921 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef d8 00 f0 64 f8 01 9b 83 42 43 d1 23 68 |
| 18:47:01.943 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.943 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.983 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:01.983 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:01.996 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:47:02.019 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:47:02.019 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:47:02.037 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:02.037 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef e4 30 00 ed 1a 29 00 ff f7 af ff 01 30 |
| 18:47:02.046 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.091 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.091 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:47:02.126 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:47:02.126 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:47:02.140 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:02.141 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef f0 3b d0 23 68 5b 19 23 60 3b 68 00 2b |
| 18:47:02.151 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.151 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.191 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.191 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:47:02.228 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:47:02.228 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:47:02.246 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:02.246 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef fc 3d d0 5a 68 |
| 18:47:02.252 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.252 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.287 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.287 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.300 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:47:02.323 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:47:02.323 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:47:02.328 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:02.344 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6B00 with 256 bytes and CRC32 0x4397DCC8 |
| 18:47:02.345 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ee 00 01 00 6b 00 00 c8 dc 97 43 |
| 18:47:02.351 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.386 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.386 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.400 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:47:02.424 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:47:02.424 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:47:02.426 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 92,4% |
| 18:47:02.426 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 00 a2 42 30 d1 00 22 5a 60 12 e0 00 2d |
| 18:47:02.447 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.447 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.488 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.488 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.500 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:47:02.524 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:47:02.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:47:02.527 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:02.528 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 0c c9 da 0c 23 33 60 00 20 fe bd 21 68 |
| 18:47:02.547 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.588 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.588 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.601 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:47:02.625 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:47:02.625 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:47:02.636 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:02.636 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 18 49 1b 1e d4 0b 29 17 d9 62 19 25 60 |
| 18:47:02.649 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.649 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.689 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.689 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.701 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:47:02.724 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:47:02.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:47:02.731 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:02.731 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 24 a3 42 11 d1 3a 60 63 68 11 60 53 60 |
| 18:47:02.752 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.792 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.792 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.805 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:47:02.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:47:02.827 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:47:02.831 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:02.831 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 30 30 00 00 f0 2f f8 20 00 07 22 0b 30 |
| 18:47:02.853 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.892 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.905 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:47:02.929 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:47:02.929 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:47:02.949 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:02.949 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 3c 23 1d 90 43 c2 1a 98 42 e6 d0 1b 1a |
| 18:47:02.959 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:02.997 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 234 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:02.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.009 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:47:03.032 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:47:03.032 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:47:03.037 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:03.037 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 48 a3 50 e3 e7 5a 60 ec e7 62 68 a3 42 |
| 18:47:03.059 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 237 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.059 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.097 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.097 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.111 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:47:03.134 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:47:03.134 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:47:03.141 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:03.141 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 54 d7 d1 3a 60 ea e7 23 00 64 68 a8 e7 |
| 18:47:03.160 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 241 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.160 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.200 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.200 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.213 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:47:03.237 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:47:03.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:47:03.239 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:03.239 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 60 0c 00 49 68 b0 e7 13 00 c7 e7 0c 23 |
| 18:47:03.260 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 245 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.260 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.299 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.313 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:47:03.336 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:47:03.337 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:47:03.339 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:03.339 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 6c 30 00 33 60 00 f0 10 f8 cd e7 05 60 |
| 18:47:03.359 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 249 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.359 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.402 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.414 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:47:03.439 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:47:03.439 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:47:03.445 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:03.445 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 78 da e7 5b 60 ff de c0 46 c0 02 00 10 |
| 18:47:03.461 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 253 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.461 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.503 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.516 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:47:03.539 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:47:03.539 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:47:03.541 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:03.541 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 84 10 b5 02 48 00 f0 1e f8 10 bd c0 46 |
| 18:47:03.563 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.564 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.602 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.602 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:47:03.639 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:47:03.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:47:03.641 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:03.641 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 90 c4 02 00 10 10 b5 02 48 00 f0 17 f8 |
| 18:47:03.662 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.702 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.702 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.715 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:47:03.739 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:47:03.739 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:47:03.741 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:03.741 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 9c 10 bd c0 46 c4 02 00 10 00 23 70 b5 |
| 18:47:03.763 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.763 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.804 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.804 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.816 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:47:03.839 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:47:03.839 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:47:03.841 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:03.841 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef a8 06 4d 04 00 08 00 2b 60 00 f0 56 f8 |
| 18:47:03.862 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.862 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.902 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.903 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:03.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:47:03.941 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:47:03.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:47:03.943 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:03.943 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef b4 43 1c 03 d1 2b 68 00 2b 00 d0 23 60 |
| 18:47:03.963 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 17 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:03.963 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.004 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.018 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:47:04.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:47:04.041 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:47:04.064 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 21 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.065 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.073 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:04.074 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef c0 70 bd c0 46 c8 02 00 10 70 47 70 47 |
| 18:47:04.121 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.121 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:47:04.155 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:47:04.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:47:04.173 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:04.173 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef cc 70 b5 05 00 0c 1e 10 d0 04 3c 23 68 |
| 18:47:04.180 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 25 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.180 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.227 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.227 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.239 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:47:04.262 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:47:04.262 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:47:04.289 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 29 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.289 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.304 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:04.304 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef d8 00 2b 00 da e4 18 28 00 ff f7 d0 ff |
| 18:47:04.351 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.351 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:47:04.386 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:47:04.386 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:47:04.401 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:04.402 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef e4 1d 4a 13 68 00 2b 05 d1 63 60 14 60 |
| 18:47:04.413 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 33 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.413 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.452 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:47:04.496 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:47:04.496 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:47:04.511 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:04.511 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef f0 28 00 ff f7 cf ff 70 bd a3 42 08 d9 |
| 18:47:04.523 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 37 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.523 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.560 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:47:04.603 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:47:04.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:47:04.624 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:04.624 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef fc 20 68 21 18 |
| 18:47:04.630 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 41 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.630 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.657 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.657 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:47:04.695 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:47:04.695 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:47:04.719 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 45 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.720 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.746 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:04.791 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6C00 with 256 bytes and CRC32 0xB81B9C86 |
| 18:47:04.811 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ee 00 01 00 6c 00 00 86 9c 1b b8 |
| 18:47:04.852 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.853 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.867 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:47:04.890 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:47:04.903 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:47:04.904 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 93,9% |
| 18:47:04.904 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 00 8b 42 f3 d1 19 68 5b 68 09 18 21 60 |
| 18:47:04.924 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 49 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.924 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.967 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:04.967 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:04.979 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:47:05.002 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:47:05.003 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:47:05.028 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 53 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.029 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.054 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:05.054 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 0c ee e7 1a 00 5b 68 00 2b 01 d0 a3 42 |
| 18:47:05.101 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.101 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:47:05.136 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:47:05.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:47:05.141 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:05.141 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 18 f9 d9 11 68 50 18 a0 42 0b d1 20 68 |
| 18:47:05.158 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 57 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.158 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.199 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.199 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.212 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:47:05.236 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:47:05.236 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:47:05.259 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 61 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.259 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.260 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:05.260 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 24 09 18 50 18 11 60 83 42 e0 d1 18 68 |
| 18:47:05.306 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.307 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.320 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:47:05.343 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:47:05.343 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:47:05.349 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:05.349 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 30 5b 68 41 18 11 60 53 60 da e7 a0 42 |
| 18:47:05.366 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 65 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.366 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.406 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.419 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:47:05.443 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:47:05.443 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:47:05.466 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 69 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.480 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:05.480 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 3c 02 d9 0c 23 2b 60 d5 e7 20 68 21 18 |
| 18:47:05.525 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.525 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.539 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:47:05.562 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:47:05.562 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:47:05.586 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 73 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.586 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.621 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:05.621 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 48 8b 42 03 d1 19 68 5b 68 09 18 21 60 |
| 18:47:05.666 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:47:05.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:47:05.703 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:47:05.733 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 77 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.733 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.740 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:05.740 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 54 63 60 54 60 ca e7 c0 46 c0 02 00 10 |
| 18:47:05.787 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.787 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:47:05.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:47:05.823 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:47:05.849 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 81 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.856 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:05.856 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 60 70 b5 0d 4d 04 00 2b 68 00 2b 01 d1 |
| 18:47:05.872 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.131->1/2/51 L_Data.ind, low priority hop count 6, tpdu 00 80 19 5a |
| 18:47:05.913 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.913 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.927 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:47:05.951 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:47:05.951 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:47:05.976 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:05.976 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:05.985 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:05.985 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 6c 0b 4b 2b 60 03 23 2e 68 03 34 9c 43 |
| 18:47:06.029 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.030 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.044 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:47:06.067 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:47:06.067 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:47:06.091 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:06.091 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 78 34 19 20 00 00 f0 10 f8 00 28 02 d1 |
| 18:47:06.093 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.093 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.141 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.141 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.153 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:47:06.176 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:47:06.177 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:47:06.186 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:06.186 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 84 2c 60 30 00 70 bd 00 f0 15 f8 01 26 |
| 18:47:06.200 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.200 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.241 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.241 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.255 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:47:06.278 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:47:06.279 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:47:06.288 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:06.288 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 90 0c 23 76 42 03 60 f6 e7 cc 02 00 10 |
| 18:47:06.303 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.303 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.344 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.357 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:47:06.380 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:47:06.384 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:47:06.407 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.408 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.426 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:06.426 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 9c d0 02 00 10 03 00 04 48 00 28 03 d0 |
| 18:47:06.473 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.473 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.485 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:47:06.508 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:47:06.508 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:47:06.510 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:06.510 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef a8 00 22 83 42 52 41 10 00 70 47 c0 46 |
| 18:47:06.532 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.532 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.571 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.571 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.585 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:47:06.608 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:47:06.608 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:47:06.630 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:06.630 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef b4 00 00 00 00 01 4b 18 68 70 47 c0 46 |
| 18:47:06.634 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.634 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.675 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.688 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:47:06.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:47:06.712 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:47:06.720 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:06.720 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef c0 e4 00 00 10 42 43 55 31 00 01 01 02 |
| 18:47:06.735 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.735 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.777 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.799 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:47:06.813 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:47:06.813 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:47:06.826 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:06.827 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef cc 03 04 06 08 0a 0e 0e 00 00 00 00 50 |
| 18:47:06.838 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.838 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.877 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.877 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.891 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:47:06.914 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:47:06.915 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:47:06.922 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:06.922 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef d8 00 00 01 50 00 00 02 50 00 00 03 50 |
| 18:47:06.941 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.941 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.980 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:06.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:06.993 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:47:07.017 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:47:07.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:47:07.020 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:07.020 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef e4 03 00 04 00 07 00 0b 00 0c 00 0d 00 |
| 18:47:07.041 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.041 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.080 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.080 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.093 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:47:07.117 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:47:07.117 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:47:07.120 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:07.120 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef f0 13 00 14 00 18 00 19 00 1a 00 1d 00 |
| 18:47:07.142 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.142 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.181 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.181 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.194 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:47:07.218 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:47:07.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:47:07.240 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.240 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.248 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:07.248 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef fc 1e 00 1f 00 |
| 18:47:07.281 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.282 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.295 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:47:07.319 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:47:07.319 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:47:07.329 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:07.340 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.340 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.351 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6D00 with 256 bytes and CRC32 0xDDA95405 |
| 18:47:07.406 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ee 00 01 00 6d 00 00 05 54 a9 dd |
| 18:47:07.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.132->1/2/91 L_Data.ind, low priority hop count 6, tpdu 00 80 19 b2 |
| 18:47:07.452 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 140 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.466 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:47:07.490 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:47:07.490 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:47:07.494 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 95,4% |
| 18:47:07.494 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 00 20 00 24 00 25 00 28 00 29 00 2a 00 |
| 18:47:07.515 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.515 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.555 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 144 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.555 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.569 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:47:07.592 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:47:07.592 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:47:07.597 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:07.597 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 0c 05 00 0e 00 1b 00 26 00 02 00 0a 00 |
| 18:47:07.615 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.656 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 148 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.668 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:47:07.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:47:07.692 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:47:07.717 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.763 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:07.763 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 18 17 00 23 00 10 00 11 00 00 00 08 00 |
| 18:47:07.810 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 152 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.810 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.822 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:47:07.846 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:47:07.846 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:47:07.871 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:07.871 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 24 09 00 15 00 16 00 1c 00 21 00 22 00 |
| 18:47:07.873 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.873 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.919 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 156 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.919 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:07.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:47:07.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:47:07.958 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:47:07.982 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:07.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.005 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:08.005 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 30 27 00 2b 00 0f 00 12 00 00 00 00 00 |
| 18:47:08.052 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 160 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.052 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.063 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:47:08.087 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:47:08.087 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:47:08.095 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:08.095 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 3c 00 00 00 00 00 00 00 00 82 00 00 00 |
| 18:47:08.131 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.171 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 164 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.172 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:47:08.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:47:08.211 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:47:08.217 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:08.218 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 48 04 01 00 00 08 02 00 00 10 04 00 00 |
| 18:47:08.233 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.253 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.36->13/3/0 L_Data.ind, low priority hop count 6, tpdu 00 80 00 00 |
| 18:47:08.299 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 169 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:47:08.333 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:47:08.333 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:47:08.358 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 172 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.358 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.411 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:08.412 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 54 20 08 00 00 40 10 00 00 80 20 00 00 |
| 18:47:08.458 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 173 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.458 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.470 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:47:08.493 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:47:08.493 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:47:08.509 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:08.509 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 60 00 41 00 00 00 82 00 00 00 04 01 00 |
| 18:47:08.519 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 176 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.519 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.560 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 177 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.573 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:47:08.595 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:47:08.595 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:47:08.603 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:08.603 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 6c 00 08 02 00 00 10 04 00 00 20 08 00 |
| 18:47:08.620 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 180 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.620 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.662 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 181 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.662 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.675 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:47:08.698 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:47:08.698 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:47:08.704 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:08.704 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 78 00 40 10 00 00 80 20 00 00 00 41 00 |
| 18:47:08.724 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 184 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.764 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 185 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.764 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.776 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:47:08.800 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:47:08.800 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:47:08.822 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:08.822 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 84 07 02 05 00 4a 02 00 00 02 c2 3a 00 |
| 18:47:08.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.1->1/1/22 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
| 18:47:08.845 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 189 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.845 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.888 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 190 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.888 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.900 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:47:08.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:47:08.923 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:47:08.925 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:08.925 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 90 05 42 02 00 62 42 35 0e 06 02 70 00 |
| 18:47:08.946 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 193 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.946 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:08.986 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 194 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:08.986 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.000 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:47:09.023 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:47:09.023 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:47:09.025 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:09.025 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 9c 42 42 65 00 49 c2 01 00 60 82 34 10 |
| 18:47:09.046 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 197 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.046 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.086 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 198 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.099 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:47:09.123 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:47:09.123 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:47:09.131 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:09.131 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef a8 22 41 10 06 21 41 10 06 61 c2 34 0f |
| 18:47:09.146 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 201 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.147 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.186 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 202 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.186 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.200 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:47:09.223 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:47:09.223 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:47:09.226 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:09.226 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef b4 27 02 34 00 26 c2 33 00 20 41 10 07 |
| 18:47:09.246 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 205 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.246 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.285 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 206 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.285 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.299 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:47:09.322 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:47:09.322 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:47:09.325 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:09.325 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef c0 25 42 3c 00 07 02 05 00 4a 02 00 00 |
| 18:47:09.345 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 209 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.345 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.385 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 210 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.385 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.399 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:47:09.422 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:47:09.422 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:47:09.424 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:09.424 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef cc 02 c2 3a 00 05 42 02 00 62 42 35 0e |
| 18:47:09.445 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 213 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.484 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 214 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.484 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.498 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:47:09.522 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:47:09.522 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:47:09.526 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:09.526 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef d8 06 02 70 00 42 42 65 00 49 c2 01 00 |
| 18:47:09.547 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 217 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.547 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.587 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 218 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.587 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.601 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:47:09.624 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:47:09.624 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:47:09.626 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:09.626 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef e4 60 82 34 10 22 41 10 06 21 41 10 06 |
| 18:47:09.647 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 221 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.648 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.687 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 222 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.687 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.700 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:47:09.724 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:47:09.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:47:09.738 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:09.739 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef f0 61 c2 34 0f 27 02 34 00 26 c2 33 00 |
| 18:47:09.747 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 225 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.787 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 226 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.787 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.800 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:47:09.823 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:47:09.823 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:47:09.825 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:09.825 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef fc 20 41 10 07 |
| 18:47:09.847 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 229 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.847 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.876 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 230 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.876 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.889 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:47:09.913 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:47:09.913 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:47:09.918 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:09.937 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 233 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.937 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:09.936 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6E00 with 256 bytes and CRC32 0x60855963 |
| 18:47:09.950 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ee 00 01 00 6e 00 00 63 59 85 60 |
| 18:47:09.960 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.1->1/1/23 L_Data.ind, low priority hop count 6, tpdu 00 80 00 |
| 18:47:09.997 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:09.997 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.011 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:47:10.035 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:47:10.039 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:47:10.041 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 96,9% |
| 18:47:10.046 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 00 25 42 3c 00 00 00 00 00 00 00 00 00 |
| 18:47:10.060 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 238 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.061 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.103 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.103 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.115 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:47:10.139 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:47:10.141 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:47:10.156 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:10.156 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 0c 89 51 00 00 25 38 00 00 5d 37 00 00 |
| 18:47:10.167 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 242 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.205 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.205 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.218 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:47:10.242 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:47:10.242 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:47:10.268 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 246 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.268 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.320 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:10.320 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 18 95 52 00 00 00 00 00 00 00 00 00 00 |
| 18:47:10.365 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.365 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.379 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:47:10.402 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:47:10.402 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:47:10.404 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:10.404 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 24 23 43 00 00 2d 43 00 00 43 43 00 00 |
| 18:47:10.424 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 250 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.424 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.465 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.465 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.478 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:47:10.501 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:47:10.501 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:47:10.513 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:10.513 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 30 b5 42 00 00 c9 42 00 00 00 00 00 00 |
| 18:47:10.525 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 254 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.525 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.565 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 255 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.578 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:47:10.602 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:47:10.602 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:47:10.625 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:10.625 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 3c 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:10.629 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 2 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.629 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.672 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 3 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.672 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.684 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:47:10.707 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:47:10.707 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:47:10.736 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 6 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.736 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.773 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:10.773 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 48 00 00 00 00 00 00 00 00 23 43 00 00 |
| 18:47:10.818 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 7 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.832 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:47:10.855 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:47:10.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:47:10.858 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:10.858 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 54 2d 43 00 00 43 43 00 00 b5 42 00 00 |
| 18:47:10.878 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.878 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.917 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 11 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.917 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:10.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:47:10.955 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:47:10.955 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:47:10.979 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:10.979 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.030 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:11.030 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 60 c9 42 00 00 0b 39 00 00 11 39 00 00 |
| 18:47:11.076 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 15 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.076 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.089 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:47:11.112 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:47:11.112 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:47:11.137 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.138 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.163 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:11.163 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 6c 17 39 00 00 1b 39 00 00 00 00 00 00 |
| 18:47:11.207 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.222 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:47:11.245 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:47:11.245 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:47:11.250 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:11.250 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 78 00 00 00 00 e3 42 00 00 ed 42 00 00 |
| 18:47:11.269 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.269 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.312 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.312 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.324 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:47:11.347 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:47:11.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:47:11.363 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:11.363 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 84 03 43 00 00 b5 42 00 00 c9 42 00 00 |
| 18:47:11.374 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.374 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.411 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.411 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.426 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:47:11.449 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:47:11.449 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:47:11.467 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:11.467 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 90 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:11.476 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.477 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.513 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.513 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:47:11.551 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:47:11.551 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:47:11.560 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:11.560 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 9c 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:11.576 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.614 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 35 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.614 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:47:11.651 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:47:11.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:47:11.666 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:11.666 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef a8 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:11.677 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 38 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.677 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.716 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 39 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.716 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.729 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:47:11.752 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:47:11.753 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:47:11.756 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:11.757 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef b4 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:11.777 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 42 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.777 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.817 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 43 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.817 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.831 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:47:11.854 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:47:11.854 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:47:11.859 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:11.859 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef c0 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:11.879 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 46 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.879 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.919 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 47 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.920 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:11.934 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:47:11.957 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:47:11.957 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:47:11.966 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:11.966 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef cc 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:11.984 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 50 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:11.984 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.025 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 51 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.025 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.036 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:47:12.060 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:47:12.060 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:47:12.064 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:12.064 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef d8 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:12.085 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 54 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.085 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.126 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 55 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.126 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.138 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:47:12.162 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:47:12.162 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:47:12.163 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:12.164 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef e4 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:12.185 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 58 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.185 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.225 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 59 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.225 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.238 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:47:12.261 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:47:12.261 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:47:12.266 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:12.266 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef f0 00 00 00 00 e1 3f 00 00 4d 3f 00 00 |
| 18:47:12.287 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 62 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.288 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.327 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 63 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.328 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.341 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:47:12.364 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:47:12.364 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:47:12.369 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:12.369 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef fc 09 40 00 00 |
| 18:47:12.386 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 66 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.387 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.415 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 67 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.415 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.429 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:47:12.452 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:47:12.452 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:47:12.454 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:12.456 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x6F00 with 256 bytes and CRC32 0x19241F61 |
| 18:47:12.456 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ee 00 01 00 6f 00 00 61 1f 24 19 |
| 18:47:12.475 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 70 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.476 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.510 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 71 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.510 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.524 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:47:12.548 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:47:12.551 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:47:12.553 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 98,5% |
| 18:47:12.554 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 00 55 41 00 00 8d 3f 00 00 b1 3f 00 00 |
| 18:47:12.576 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 74 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.576 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.616 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 75 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.616 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.627 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:47:12.651 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:47:12.651 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:47:12.676 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 78 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.676 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.721 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:12.721 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 0c 00 00 00 00 00 00 00 00 e5 44 00 00 |
| 18:47:12.768 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 79 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.768 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.780 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:47:12.803 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:47:12.803 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:47:12.807 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:12.807 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 18 1b 45 00 00 29 45 00 00 3d 45 00 00 |
| 18:47:12.830 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 82 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.830 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.869 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 83 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.870 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.882 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:47:12.905 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:47:12.905 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:47:12.920 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:12.920 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 24 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:12.932 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 86 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.932 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.974 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 87 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:12.974 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:12.985 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:47:13.008 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:47:13.008 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:47:13.022 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:13.023 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 30 00 00 00 00 81 59 00 00 5f 39 00 00 |
| 18:47:13.036 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 90 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.036 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.074 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 91 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.074 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.086 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:47:13.109 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:47:13.109 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:47:13.128 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:13.128 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef 3c 13 40 00 00 00 00 00 00 00 00 00 00 |
| 18:47:13.136 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 94 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.136 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.176 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 95 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.176 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:47:13.214 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:47:13.214 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:47:13.235 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:13.236 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef 48 a9 42 00 00 63 39 00 00 00 00 00 00 |
| 18:47:13.237 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 98 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.237 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.284 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 99 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.310 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:47:13.321 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:47:13.321 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:47:13.336 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:13.336 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 54 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:13.347 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 102 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.347 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.388 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 103 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.389 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.401 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:47:13.424 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:47:13.424 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:47:13.448 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 106 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.448 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.456 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:13.456 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 60 00 00 00 00 00 00 00 00 15 5a 00 00 |
| 18:47:13.501 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 107 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.501 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.515 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:47:13.538 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:47:13.538 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:47:13.546 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:13.547 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 6c 5f 39 00 00 f7 56 00 00 00 00 00 00 |
| 18:47:13.565 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 110 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.606 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 111 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.606 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.618 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:47:13.641 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:47:13.641 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:47:13.645 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:13.645 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 78 00 00 00 00 a9 42 00 00 67 39 00 00 |
| 18:47:13.664 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 114 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.664 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.704 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 115 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.704 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.718 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:47:13.742 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:47:13.742 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:47:13.757 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:13.757 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 84 7d 39 00 00 97 45 00 00 00 00 00 00 |
| 18:47:13.767 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 118 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.808 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 119 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.808 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.820 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:47:13.843 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:47:13.843 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:47:13.856 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:13.856 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 90 85 39 00 00 79 39 00 00 00 00 00 00 |
| 18:47:13.867 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 122 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.867 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.910 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 123 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.910 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:13.923 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:47:13.945 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:47:13.946 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:47:13.972 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 126 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:13.972 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.006 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:14.006 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 9c 00 00 00 00 63 36 00 00 e9 56 00 00 |
| 18:47:14.051 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 127 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.051 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.065 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:47:14.088 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:47:14.088 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:47:14.093 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:14.093 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef a8 05 5e 00 00 9d 39 00 00 79 58 00 00 |
| 18:47:14.113 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 130 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.155 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 131 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.155 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.167 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:47:14.190 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:47:14.191 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:47:14.215 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 134 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.215 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.222 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:14.222 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef b4 1d 3a 00 00 5f 40 00 00 a9 42 00 00 |
| 18:47:14.266 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 135 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.266 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.280 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:47:14.303 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:47:14.303 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:47:14.321 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:14.321 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef c0 3b 3a 00 00 7d 39 00 00 97 45 00 00 |
| 18:47:14.331 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 138 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.331 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.369 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 139 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.375 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.382 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:47:14.406 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:47:14.413 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:47:14.415 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:14.415 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef cc 2d 39 00 00 f5 54 00 00 79 39 00 00 |
| 18:47:14.436 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 142 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.436 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.475 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 143 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.475 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.489 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:47:14.512 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:47:14.512 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:47:14.514 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:14.514 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef d8 29 39 00 00 1f 39 00 00 f1 62 00 00 |
| 18:47:14.536 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 146 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.536 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.574 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 147 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.575 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.589 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:47:14.612 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:47:14.612 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:47:14.615 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:14.615 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef e4 07 63 00 00 49 59 00 00 00 00 00 00 |
| 18:47:14.637 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 150 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.637 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.680 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 151 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.680 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.691 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:47:14.714 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:47:14.714 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:47:14.719 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:14.719 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef f0 00 00 00 00 e3 42 00 00 ed 42 00 00 |
| 18:47:14.740 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 154 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.740 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.782 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 155 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.782 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.793 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:47:14.817 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:47:14.819 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:47:14.821 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:14.821 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef fc 03 43 00 00 |
| 18:47:14.842 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 158 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.842 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.870 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 159 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.870 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.884 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:47:14.908 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:47:14.908 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:47:14.910 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:14.910 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x7000 with 256 bytes and CRC32 0x1A3ED34B |
| 18:47:14.911 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ee 00 01 00 70 00 00 4b d3 3e 1a |
| 18:47:14.931 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 162 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.967 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 163 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:14.967 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:14.980 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:47:15.004 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:47:15.004 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:47:15.006 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 256 bytes: 100,0% |
| 18:47:15.014 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef 00 b5 42 00 00 c9 42 00 00 71 38 00 00 |
| 18:47:15.027 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 166 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.027 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.068 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 167 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.068 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.081 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:47:15.105 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:47:15.104 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:47:15.108 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:15.108 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef 0c 75 38 00 00 7b 38 00 00 81 38 00 00 |
| 18:47:15.132 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 170 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.132 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.170 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 171 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.170 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:47:15.207 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:47:15.207 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:47:15.213 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:15.213 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef 18 87 38 00 00 8d 38 00 00 93 38 00 00 |
| 18:47:15.231 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 174 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.231 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.271 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 175 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.271 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.284 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:47:15.308 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:47:15.308 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:47:15.310 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:15.310 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef 24 99 38 00 00 9f 38 00 00 a5 38 00 00 |
| 18:47:15.330 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 178 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.330 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.371 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 179 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.371 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.384 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:47:15.408 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:47:15.407 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:47:15.430 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 182 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.430 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.435 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:15.435 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef 30 ab 38 00 00 b1 38 00 00 b7 38 00 00 |
| 18:47:15.481 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 183 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.481 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.493 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:47:15.519 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:47:15.519 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:47:15.530 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:15.530 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef 3c bd 38 00 00 c3 38 00 00 c9 38 00 00 |
| 18:47:15.542 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.51->6/1/31 L_Data.ind, low priority hop count 6, tpdu 00 80 0c 0a |
| 18:47:15.565 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 187 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.565 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.601 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 188 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.601 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.615 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:47:15.639 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:47:15.639 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:47:15.662 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:15.663 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ef 48 cf 38 00 00 d5 38 00 00 db 38 00 00 |
| 18:47:15.666 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 191 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.666 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.712 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 192 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.712 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:47:15.747 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:47:15.747 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:47:15.764 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:15.764 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 54 e1 38 00 00 e7 38 00 00 f3 38 00 00 |
| 18:47:15.775 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 195 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.775 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.812 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 196 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.812 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.827 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:47:15.850 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:47:15.850 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:47:15.873 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 199 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.874 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.884 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:15.885 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ef 60 f9 38 00 00 ed 38 00 00 ff 38 00 00 |
| 18:47:15.931 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 200 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.931 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.944 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:47:15.966 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:47:15.966 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:47:15.988 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 203 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:15.988 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:15.993 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:15.994 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 ef 6c 05 39 00 00 f8 b5 c0 46 f8 bc 08 bc |
| 18:47:16.038 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 204 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.038 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.052 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:47:16.081 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe dc 7f |
| 18:47:16.081 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:47:16.089 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:16.089 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 78 9e 46 70 47 2d 63 00 00 01 6b 00 00 |
| 18:47:16.106 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 207 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.106 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.144 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 208 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.144 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.158 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:47:16.183 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:47:16.183 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:47:16.205 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:16.205 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 84 f8 b5 c0 46 f8 bc 08 bc 9e 46 70 47 |
| 18:47:16.207 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 211 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.208 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.256 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 212 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.268 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:47:16.292 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:47:16.292 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:47:16.301 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:16.301 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ef 90 21 41 56 50 21 40 3a 4f 30 38 2e 31 |
| 18:47:16.315 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 215 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.315 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.354 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 216 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.354 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.368 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:47:16.392 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:47:16.392 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:47:16.415 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 219 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.416 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.421 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:16.421 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6a f8 ef 9c 30 20 20 35 2e 31 30 00 40 82 5c 00 |
| 18:47:16.469 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 220 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.469 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.480 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:47:16.503 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6a fe dc 7f |
| 18:47:16.504 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ea |
| 18:47:16.527 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 223 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.528 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.558 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:16.558 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6e f8 ef a8 29 82 69 00 00 6c dc 02 00 00 00 00 |
| 18:47:16.603 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 224 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.603 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.617 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ee |
| 18:47:16.644 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ee |
| 18:47:16.643 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 6e fe dc 7f |
| 18:47:16.657 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:16.657 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 72 f8 ef b4 e8 00 00 10 00 00 00 00 00 00 00 00 |
| 18:47:16.669 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 227 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.669 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.711 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 228 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.711 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.723 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f2 |
| 18:47:16.747 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f2 |
| 18:47:16.746 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 72 fe dc 7f |
| 18:47:16.758 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:16.758 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 76 f8 ef c0 68 00 00 00 d0 00 00 00 00 00 00 00 |
| 18:47:16.771 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 231 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.771 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.819 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 232 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.819 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.826 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu f6 |
| 18:47:16.849 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu f6 |
| 18:47:16.849 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 76 fe dc 7f |
| 18:47:16.858 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:16.858 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7a f8 ef cc 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:16.870 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 235 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.870 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.911 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 236 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.911 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:16.925 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fa |
| 18:47:16.950 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7a fe dc 7f |
| 18:47:16.951 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fa |
| 18:47:16.960 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:16.960 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 7e f8 ef d8 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:16.977 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 239 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:16.977 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.016 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 240 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.017 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.029 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu fe |
| 18:47:17.052 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 7e fe dc 7f |
| 18:47:17.052 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu fe |
| 18:47:17.059 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:17.059 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 42 f8 ef e4 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:17.079 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 243 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.079 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.116 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 244 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.116 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c2 |
| 18:47:17.154 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 42 fe dc 7f |
| 18:47:17.154 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c2 |
| 18:47:17.168 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:17.168 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 46 f8 ef f0 00 00 00 00 00 00 00 00 00 00 00 00 |
| 18:47:17.179 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 247 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.179 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.221 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 248 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.221 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.233 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu c6 |
| 18:47:17.256 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 46 fe dc 7f |
| 18:47:17.257 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu c6 |
| 18:47:17.260 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:17.260 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4a f8 ef fc 00 00 00 00 |
| 18:47:17.280 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 251 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.281 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.311 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 252 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.311 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.324 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ca |
| 18:47:17.355 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4a fe dc 7f |
| 18:47:17.356 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ca |
| 18:47:17.359 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:17.359 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x7100 with 256 bytes and CRC32 0xBC03476F |
| 18:47:17.359 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 4e f8 ee 00 01 00 71 00 00 6f 47 03 bc |
| 18:47:17.374 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/2 L_Data.ind, low priority hop count 6, tpdu 00 80 0c ec |
| 18:47:17.394 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 0 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.395 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.433 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 1 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.433 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.445 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ce |
| 18:47:17.468 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu ce |
| 18:47:17.468 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 4e fe dc 7f |
| 18:47:17.471 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
48 |
Sending 4 bytes: 100,0% |
| 18:47:17.473 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 52 f8 ef 00 00 00 00 00 |
| 18:47:17.493 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 4 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.493 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.527 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 5 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.527 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.537 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d2 |
| 18:47:17.560 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 52 fe dc 7f |
| 18:47:17.560 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d2 |
| 18:47:17.565 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:17.566 |
main |
INFO |
org.selfbus.updater.FlashFullMode |
doFullFlash |
74 |
Program device at flash address 0x7200 with 4 bytes and CRC32 0x2144DF1C |
| 18:47:17.566 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 56 f8 ee 04 00 00 72 00 00 1c df 44 21 |
| 18:47:17.584 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.5->6/3/3 L_Data.ind, low priority hop count 6, tpdu 00 80 14 ee |
| 18:47:17.605 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 9 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.605 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.641 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 10 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.642 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.656 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu d6 |
| 18:47:17.679 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu d6 |
| 18:47:17.679 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 56 fe dc 7f |
| 18:47:17.683 |
main |
INFO |
org.selfbus.updater.Updater |
run |
408 |
Requesting Bootloader statistic... |
| 18:47:17.683 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5a f8 df |
| 18:47:17.703 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 13 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.703 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.724 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 14 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.724 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.741 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu da |
| 18:47:17.767 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu da |
| 18:47:17.767 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5a fe de 00 00 00 00 |
| 18:47:17.772 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
requestBootLoaderStatistic |
325 |
?[0;93m#Disconnect: 0 #repeated T_ACK: 0?[0m |
| 18:47:17.794 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.0.3->10/1/3 L_Data.ind, low priority hop count 6, tpdu 00 80 05 a0 |
| 18:47:17.795 |
main |
INFO |
org.selfbus.updater.Updater |
printStatisticData |
253 |
Wrote 16900 bytes from file to device in 02:44. ?[0;92m(103,02 B/s)?[0m ?[0;92mDisconnect: 0?[0m ?[0;92mTimeout: 0?[0m |
| 18:47:17.799 |
main |
INFO |
org.selfbus.updater.Updater |
run |
420 |
?[41mPreparing boot descriptor with valid: true, start: 0x3000, end: 0x7203, size: 0x4204, crc32: 0xB9F0A613, APP_VERSION pointer: 0x7197?[0m |
| 18:47:17.800 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 5e f8 ef 00 00 30 00 00 03 72 00 00 13 a6 f0 b9 |
| 18:47:17.816 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 18 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.816 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.855 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 19 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.855 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.869 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu de |
| 18:47:17.892 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 5e fe dc 7f |
| 18:47:17.892 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu de |
| 18:47:17.895 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:17.895 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 62 f8 ef 0c 97 71 00 00 |
| 18:47:17.915 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 22 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.915 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.945 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 23 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:17.945 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:17.959 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e2 |
| 18:47:17.982 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 62 fe dc 7f |
| 18:47:17.982 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e2 |
| 18:47:17.984 |
main |
DEBUG |
org.selfbus.updater.upd.UPDProtocol |
checkResult |
51 |
. |
| 18:47:17.984 |
main |
INFO |
org.selfbus.updater.DeviceManagement |
programBootDescriptor |
304 |
Updating boot descriptor with CRC32 0x5a62abdc, length 16 |
| 18:47:17.984 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 66 f8 ed 10 00 00 00 dc ab 62 5a |
| 18:47:18.006 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 26 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:18.006 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:18.039 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 27 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:18.040 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:18.053 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu e6 |
| 18:47:18.088 |
Calimero link notifier |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu e6 |
| 18:47:18.088 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, low priority hop count 6, tpdu 66 fe dc 7f |
| 18:47:18.090 |
main |
INFO |
org.selfbus.updater.Updater |
run |
426 |
Finished programming ?[0;93mdevice 15.15.192 with \...\out8-bcu1_flashstart_0x3000_release_o8_4t_bi_v5.10_libv2.02.hex?[0m
|
| 18:47:18.091 |
main |
INFO |
org.selfbus.updater.Updater |
run |
427 |
?[42mFirmware Update done, Restarting device now...?[0m |
| 18:47:18.091 |
main |
WARN |
org.selfbus.updater.DeviceManagement |
restartProgrammingDevice |
59 |
restarting device destination 15.15.192 (TL 192.168.1.12:3671) OpenIdle, conn.-oriented, no keep-alive, no verify mode |
| 18:47:18.103 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, low priority hop count 6 repeat, tpdu 6b 80 |
| 18:47:18.113 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 30 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:18.113 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:18.131 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 31 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:18.131 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:18.146 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 15.15.192->1.0.13 L_Data.ind, system priority hop count 6, tpdu ea |
| 18:47:18.184 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
205 |
indication 1.1.32->6/1/11 L_Data.ind, low priority hop count 6, tpdu 00 80 07 c2 |
| 18:47:24.163 |
Calimero idle thread |
DEBUG |
calimero.link.192.168.1.12:3671 |
doSend |
514 |
send (wait for confirmation) 0.0.0->15.15.192 L_Data.req, system priority hop count 6 repeat, tpdu 81 |
| 18:47:24.187 |
KNXnet/IP receiver |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
handleServiceType |
397 |
received request seq 34 (channel 2) cEMI L-Data.con 1.0.13->15.15.192 |
| 18:47:24.188 |
KNXnet/IP receiver |
DEBUG |
calimero.link.192.168.1.12:3671 |
frameReceived |
210 |
confirmation of 15.15.192 |
| 18:47:24.199 |
main |
DEBUG |
calimero.knxnetip.KNXnet/IP Tunneling 192.168.1.12:3671 |
log |
157 |
close connection - user request |
| 18:47:24.200 |
main |
DEBUG |
calimero.link.192.168.1.12:3671 |
connectionClosed |
227 |
link closed |
| 18:47:24.201 |
Calimero link notifier |
DEBUG |
calimero.mgmt.TL 192.168.1.12:3671 |
linkClosed |
151 |
attached link was closed |
| 18:47:24.202 |
Calimero link notifier |
DEBUG |
calimero.mgmt.MC 192.168.1.12:3671 |
linkClosed |
191 |
attached link was closed |
| 18:47:24.203 |
main |
INFO |
org.selfbus.updater.Updater |
main |
109 |
|
| 18:47:24.221 |
main |
DEBUG |
org.selfbus.updater.Updater |
main |
110 |
main exit |